Low Jitter LVPECL Clock Oscillator Description: 2111 Comprehensive Drive 2111 Comprehensive Drive Aurora, Illinois 60505 Aurora, Illinois 60505 Phone: 630- 851- 4722 Phone: 630- 851- 4722 Fax: 630- 851- 5040 Fax: 630- 851- 5040 www.conwin.com www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Features: The Connor-Winfield PBxxx series are 5.0x7.0mm Surface Mount, LVPECL output logic, Fixed Frequency Crystal Controlled Oscillator (XO) designed for applications requiring tight frequency stability, wide temperature range with very low jitter. Operating at 3.3V supply voltage, the PBxxx series provides LVPECL Differential Outputs with enable / disable function. The surface mount package is designed for highdensity mounting and is optimum for mass production. Model PBxxx - Series 5 x 7mm Surface Mount Package 3.3 Vdc Operation LVPECL Differential Outputs Frequency Stabilities Available: +/-20 ppm,+/-25 ppm, +/-50 ppm or +/-100 ppm Temperature Ranges Available: 0 to 70°C, -40 to 85°C, 0 to 85°C or -20 to 70°C Low Jitter <0.1ps RMS Tri-State Enable/Disable on Pad 1 Tape and Reel Packaging RoHS Compliant / Lead Free 1404 P 156.2 B223 5 MH Z Applications: 40GB Ethernet and 100GB Ethernet reference clocks. Fiber channel High speed Data conversion, ADC, DAC Storage Area Networks, SANs Absolute Maximum Ratings Parameter Minimum Parameter Minimum Storage Temperature Supply Voltage (Vcc) Input Voltage Nominal -55 -0.5 -0.5 Maximum - - - 125 4.6 Vcc + 0.5 Units Notes Units Notes Units Notes °C Vdc Vdc Operating Specifications Nominal Maximum Output Frequency; (Fo) 125 - 170 MHz Total Frequency Tolerance(See Ordering Information for full part number) Model PBx43 -20 - 20 ppm 1 Model PBx13 -25 - 25 ppm 1 Model PBx23 -50 - 50 ppm 1 Model PBx33 -100 - 100 ppm 1 Operating Temperature Range(See Ordering Information for full part number) Model PB1x3 0 - 70 °C Model PB2x3 -40 - 85 °C Model PB3x3 0 - 85 °C Model PB4x3 -20 - 70 °C Freq. Stability vs. Supply Voltage Change: - ±0.5 - ppm 2 Supply Voltage: (Vcc) 3.135 3.3 3.465 Vdc Supply Current: (Icc) - 40 50 mA Jitter: Period Jitter - 3.0 5.0 ps RMS Integrated Phase Jitter (BW = 12 KHz to 20 MHz) - 0.060 0.100 ps RMS SSB Phase Noise: Fo = 156.25 MHz @ 10 Hz offset - -64 - dBc/Hz @ 100 Hz offset - -95 - dBc/Hz @ 1 KHz offset - -126 - dBc/Hz @ 10 KHz offset - -149 - dBc/Hz @ 100 KHz offset - -159 - dBc/Hz @ 1 MHz offset - -161 - dBc/Hz Start-Up Time: - - 2 ms LVPECL Output Characteristics Parameter Load: Output Voltage: (High) (Vcc = 3.3 V) (Voh) (Low) (Vcc = 3.3 V) (Vol) Duty Cycle: at 50% Level Rise / Fall Time: 20% to 80% Minimum Nominal 2.275 - 45 - - - 50 0.3 - Maximum 50 - - 1.680 55 1.0 Ohm 4 V V % 5 ns Ordering Information PB Type Bulletin Page Revision Date Ec277 1 of 2 05 21 Jan 2014 PB Series LVPECL Low Jitter Clock Series 5x7 mm 2 2 3 Temperature Range Frequency Stability Supply Voltage 1 = 0 to 70°C 2 = -40 to 85°C 3 = 0 to 85°C 4 = -20 to 70°C 4 = ±20 ppm 1 = ±25 ppm 2 = ±50 ppm 3 = ±100 ppm 3 = 3.3 Vdc, OE Pad 1 - 156.25M Output Frequency Frequency Format -xxx.xM Min -xxx.xxxxxxM Max *Amount of numbers after the decimal point. M = MHz Example: Part Number PB223-156.25M = LVPECL Output,-40 to 85, +/-20ppm, 3.3Vdc, OE Pad 1, Output Frequency 156.25 MHz Specifications subject to change without notification. See Connor-Winfield's website for latest revision. Not intended for life support applications. All dimensions in inches. © Copyright 2014 The Connor-Winfield Corporation 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com OE Input Characteristics Parameter Minimum Enable Input Voltage: (High) (Vih) Disable Input Voltage: (Low) (Vil) Enable Time: Disable Time: Standby Current: (When Osc. is disabled) Nominal 90%Vcc - - - - Maximum - - - - 12 - 10%Vcc 2 200 - Units Notes Vdc Vdc ms ns mA 3 3 Package Characteristics Package: Hermetically sealed ceramic package and metal cover Vibration: Shock: Soldering Process; Vibration per Mil Std 883E Method 2007.3 Test Condition A. Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. RoHS compliant lead free. See soldering profile on page 2. Environmental Characteristics Notes: 1. Includes calibration @ 25°C, frequency stability vs. change in temperature, supply voltage and load variations, shock and vibration and 20 years aging. 2. Frequency stability vs. change in supply voltage, Vcc±5% @ 25°C. 3. When the oscillator is disabled the outputs are at high impedance. Outputs are enabled with no connection on E/D pad. 4. Outputs must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 5. Duty cycle measured at 50% output voltage swing. Package Outline 0.275 (7.0mm) 0.197 (5.0mm) 0.100 (2.54mm) C Bypass Ground 1404 PB223 156.25 MHZ 0.079 (2.00mm) 0.165 (4.20mm) 0.102 (2.6mm) (1.75mm) 1: 2: 3: 4: 5: 6: 0.200 (5.08mm) 0.055 (1.4mm) .069 Pad Connections Suggested Pad Layout Top View OE Enable / Disable Function 1 Dimensional Tolerance +/-0.008 (+/-0.2mm) Ground Keep Out Area Test Circuit Enable / Disable (OE) N/C Ground Output Q Complementary Output Q Supply Voltage (Vcc) 0.070 (1.80mm) Function: Low: High or Open: Output Waveform Output Disabled (High Impedance) Enabled Solder Profile Temperature 260°C 260°C 220°C 180°C Duty Cycle 150°C Q 120°C 80% 50% 2 20% Q OE N/C 0 tr Vcc = Vcc2 = 3.3Vdc 10 s Up to 120 s 60 to 90 s Typical Typical tf Meets IPC/JEDEC J-STD-020C Phase Noise Plot Tape and Reel Dimensions Typical Phase Noise Plot for PB223-156.25M Direction of Feed (Customer) 16mm Tape Bulletin Page Revision Date Specifications subject to change without notification. See Connor-Winfield's website for latest revision. Not intended for life support applications. All dimensions in inches. © Copyright 2014 The Connor-Winfield Corporation EC277 2 of 2 05 21 Jan 2014