High Reliability Surface Mount LVCMOS Clock Oscillator Series 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Description: Features: The Connor-Winfield’s XH7xx, XH8xx and XH9xx, High Reliability Series are 5x7mm Surface Mount, Fixed Frequency Crystal Controlled Oscillators (XO). Designed for applications requiring tight frequency stability over a wide temperature range, operating at 2.5V or 3.3V supply voltage, the XH7xx, XH8xx and XH9xx series provides an LVCMOS output with enable / disable function. The surface mount package is designed for high-density mounting and is optimum for mass production. Model XH7xx - XH8xx - XH9xx Series Pure Spectrum™ Technology 5.0 x7.0mm Surface Mount Package Supply Voltages: 2.5V or 3.3V LVCMOS Output Logic Frequency Stabilities: +/-50ppm / +/-100ppm Temperature Ranges: -40 to 85°C / -55 to 125°C / -55 to 85°C Low Jitter <1pS RMS Sub-harmonics / Spurious: -70 dBc Minimal Frequency Perturbations: 3ppm Max. Guaranteed Proper Frequency Startup. Screening Options are Available Gold Plated Terminations 1245 XH 150.0 723 MHZ Package Outline Suggested Pad Layout 0.275 0.055 (7.0mm) (1.40mm) Vcc 4 0.047 1245 XH723 150.0 MHZ 0.197 (5.0mm) 3 (1.20mm) 0.165 (4.2mm) (5.08mm) (2.60mm) C–by 1 Keep Out Area 2 Bypass capacitor, C–by, should be ceramic capacitor ≥ .01uf. (1.50mm) 0.079 (2.0mm) Top View 0.200 0.102 0.060 0.200 (5.08mm) Ground 0.070 (1.8mm) Keep Out Area: Do not route any traces in the keep out area. It is recommended the next layer under the keep out area is to be ground plane. Pad Connections 1: 2: 3: 4: Enable / Disable Function Enable / Disable (OE) Ground: Output Supply Voltage (Vcc) Function: (Pad 1) High or Open: Low Output Enabled Disabled (High Impedance) Ordering Information XH Bulletin Page Revision Date Sm127 1 of 4 07 16 Jan 2012 7 2 3 -150.0M Supply Voltage Output Frequency Oscillator Type Temperature Range Frequency Tolerance High Reliability Clock LVCMOS Series 5x7 mm 7 = -55 to 125°C 8 = -40 to 85°C 9 = -55 to 85°C 2 = ±50 ppm 3 = ±100 ppm Example Part Numbers: 2 = 2.5 Vdc 3 = 3.3 Vdc Frequency Format -xxx.xM Min.* -xxx.xxxxxxM Max* *Amount of numbers after the decimal point. M = MHz XH723-150.0M = 5x7 mm package, -55 to 125°C, ±100 ppm, 3.3 Vdc, LVCMOS, Output Frequency 150.0 MHz XH922-44.736M = 5x7 mm package, -55 to 85°C, ±50 ppm, , 3.3 Vdc, LVCMOS, Output Frequency 44.736 MHz Specifications subject to change without notice. All dimensions in inches. © Copyright 2012 The Connor-Winfield Corporation 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Absolute Maximum Ratings Parameter Storage Temperature Supply Voltage (Vcc) Input Voltage Minimum -55 -0.5 -0.5 Nominal Maximum Units Notes Nominal Maximum Units Notes - - - 125 85 85 °C °C °C - - 50.0 100.0 ppm ppm 1 1 2.5 3.3 2.625 3.465 Vdc Vdc ±5% ±5% - - - - - - 10 20 35 45 65 75 mA mA mA mA mA mA Nominal Maximum Units - - - Output Enabled Disabled 2 200 10 ms ns uA - - - 125 5.0 Vcc+0.5 °C Vdc Vdc Operating Specifications Parameter Minimum Center Frequency: (Fo) 10 Operating Temperature Range: (See Ordering Information) Model: XH7xx -55 Model: XH8xx -40 Model: XH9xx -55 Total Frequency Tolerance: (See Ordering Information) Model: XH72x, XH82x, XH92x -50.0 Model: XH73x, XH83x, XH93x -100.0 Supply Voltage: (Vcc) (See Ordering Information) Model: XH7x2, XH8x2, XH9x2 2.375 Model: XH7x3, XH8x3, XH9x3 3.135 Supply Current (Icc) 10 to 39.999 MHz - 40 to 79.999 MHz - 80 to 89.999 MHz - 90 to 124.999 MHz - 125 to 164.999 MHz - 165 to 200 MHz - - 200 MHz Input Characteristics Parameter Minimum Enable Voltage (High) (VIH) 70% Vcc Disable Voltage (Low) (VIL) - Enable Time - Disable Time - Output Disable Current (Standby Current) (Icc) - Enable / Disable Function Pad 1 High or Open Low - - - 30% Vcc Vdc Vdc Notes 2 2 LVCMOS Output Characteristics Parameter Load Output Voltage: High (VOH) Low (VOL) Duty Cycle at 50% of Vcc Rise / Fall Time: measured from 10% to 90% For Frequencies < 60 MHz For Frequencies > 60 MHz Start-Up Time: Sub-harmonics Spurious Frequency Perturbations over Temperature Minimum Nominal Maximum Units Vcc-0.4 - 45 Vcc-0.3 0.3 50 - 0.4 55 V V % - - - - - - 2.0 1.3 - - - - 3.0 2.0 2 -70 -70 3 ns ns ms dBc dbc ppm - 15 - pF Bulletin Page Revision Date Specifications subject to change without notice. All dimensions in inches. © Copyright 2012 The Connor-Winfield Corporation Notes 3 4 Sm127 2 of 4 07 16 Jan 2013 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Jitter / Phase Noise Characteristics Parameter Minimum Nominal Maximum Units Period Jitter Integrated Phase Jitter - - 3 0.5 5 1 ps RMS ps RMS SSB Phase Noise for XH723 Fo = 40.0 MHz @ 10 Hz offset @ 100 Hz offset @ 1 KHz offset @ 10 KHz offset @ 100 KHz offset @ 1 MHz offset - - - - - - -75 -105 -125 -140 -145 -148 - - - - - - dBC/Hz dBC/Hz dBC/Hz dBC/Hz dBC/Hz dBC/Hz Jitter Notes Phase Noise Plot Typical Phase Noise Plot Model XH723-40.0M Package Characteristics Package Package Terminations Hermetically sealed ceramic package and metal cover Solder pads are Au plated, thickness 0.30 to 1.00 micron thick. Environmental Characteristics Vibration: Shock: Soldering Process; Screening Vibration per Mil Std 883E Method 2007.3 Test Condition A. Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. Meets IPC/JEDEC J-STD-020C. See soldering profile on page 4. Other screening options are available. Notes: 1. Inclusive of calibration @ 25°C, frequency stability vs. change in temperature, supply voltage and load variations, shock and vibration and 10 years aging. 2. When the oscillator is disabled the output is ar high impedance.. Outputs is enabled with no connection on E/D pad 1. 3. Oscillator is guaranteed to start at the specified frequency (Fo) under all conditions. 4. This part will not exhibit frequency jumps of more that 3 ppm when tested every 2°C within the operating temperature range specified supply voltage and load. Bulletin Page Revision Date Specifications subject to change without notice. All dimensions in inches. © Copyright 2012 The Connor-Winfield Corporation Sm127 3 of 4 07 16 Jan 2013 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Test Circuit Vcc OSCILLOSCOPE A PROBE POWER SUPPLY 4 V 3 OSC .01uf 1 CL 2 FREQ COUNTER INPUT for E/D Output Waveform 90% 50% 10% Solder Profile Temperature 260°C 260°C 220°C 180°C 150°C 120°C 0 10 s Up to 120 s 60 to 90 s Typical Typical Meets IPC/JEDEC J-STD-020C Tape and Reel Dimensions Direction of Feed (Customer) Revision History Rev 00. Data sheet issued 08/15/08 Rev 01 Updated tape and reel information 01/14/09 Rev 02. Changed min frequency to 10 MHz. 5/6/09. Rev 03, Added pure spectrum logo. 10.20.09. Rev 04, Added models XH822 XH832 XH823 XH833. 11/25/09 Rev 05, Removed RoHS and added screening options. 08/17/12 Rev 06, Updated data sheet format and rise and fall times, added 40 MHz phase noise plot. 12/11/12. Rev 07, Corrected pad numbering on package outline , top view. GD 01/16/13. Specifications subject to change without notice. All dimensions in inches. © Copyright 2012 The Connor-Winfield Corporation Bulletin Page Revision Date Sm127 4 of 4 07 16 Jan 2013