High Frequency SMT 5.0 x 7.0mm LVPECL VCXO Models: V752 / V762 Features: Description 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 The Connor-Winfield Models V752 and V762 are 3.3V. Surface Mount 5.0x7.0mm, Voltage Controlled Crystal Oscillator (VCXO) with LVPECL Differential outputs and enable/disable function. The V752 and V762 are designed for use with applications utilizing a PLL system requiring very high frequency and low jitter. The surface mount package is designed for high-density mounting and is optimum for mass production. •3.3V Operation •Absolute Pull Range (APR): ±50ppm •Temperature Range: -40° to 85°C •Differential LVPECL Outputs •Low Jitter 0.3ps RMS Typical •Enable / Disable Function: Models: V752: Enable Low Models: V762: Enable High •5.0x7.0mm Surface Mount Package •Tape and Reel Packaging •RoHS Compliant / Lead Free Absolute Maximum Ratings Parameter Minimum Nominal Maximum Units -55 -0.5 -0.5 - - - 125 4.6 Vcc+0.5 °C Vdc Vdc Storage Temperature Supply Voltage (Vcc) Control Voltage (Vc) Notes Operating Specifications Parameter Minimum Center Frequency (Fo) 25 Operating Temperature Range -40 Supply Voltage (Vcc) 3.135 Supply Current (Icc) - Period Jitter RMS - Integrated Phase Jitter (BW=12kHz to 20MHz) - Typical Phase Noise for 155.52MHz SSB Phase Noise at 10Hz offset - SSB Phase Noiseat 100Hz offset - SSB Phase Noiseat 1kHz offset - SSB Phase Noiseat 10kHz offset - SSB Phase Noiseat 100kHz offset - Nominal Maximum Units - - 3.3 - 3 204.8 85 3.465 100 5 MHz °C Vdc mA ps RMS 0.3 1.0 ps RMS -60 -90 -120 -140 -145 - - - - - dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz Notes Input Characteristics Parameter Minimum Control Voltage Range (Vc) Typical Slope (Fo = 155.52MHz @Vc=1.65V) Absolute Pull Range (APR) Monotonic Linearity DC Input Resistance (Pad 1) Modulation Bandwidth (3dB) Model V752 Enable / Disable Function Enable Input Voltage - Low (Vil) Disable Input Voltage - High (Vih) Model V762 Enable / Disable Function Enable Input Voltage - High (Vih) Disable Input Voltage - Low (Vil) Nominal Maximum Units 0.3 1.65 3.0 Vdc Notes - 75 - ppm/V ±50 -10 - 25 - - 60K - - 10 - - ppm % Ohm kHz 1 - 2.275 - - 1.68 - Vdc 2 2.275 - - - - 1.68 Vdc 2 LVPECL Output Characteristics Parameter Load Voltage High (Voh) Low (Vol) Duty Cycle at 50% Level Rise / Fall Time 20% to 80% Minimum Nominal Maximum Units Notes - 2.275 - 45 - - - - 50 0.6 50 - 1.68 55 1.5 Ohms Vdc 3 % nS Package Characteristics PackageHermetically sealed, ceramic package with grounded metal cover. Soldering ProcessRoHS compliant / lead free, see solder profile on page 2. Bulletin Page Revision Date Vx533 1 of 2 04 04 Nov 2014 Notes: 1. Absolute pull range (APR) is the minimum guaranteed pull range of the VCXO under all conditions over the lifetime operation. Including calibration @ 25°C, frequency vs. change in temperature, frequency vs. change in supply voltage, frequency vs. change in load, shock and vibration and aging for ten years. The APR is referenced to Fo. Positive Transfer Function. 2. Outputs are enabled with no connection on pad 2. When oscillator is disabled both outputs are in a high impedance state. 3. 50 ohm termination into Vcc-2V or Thevein equivalent. 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Enable / Disable Function Ordering Information V7 Type LVPECL VCXO 5.0x7.0mm Packate 5 2 Temperature Range -40 to 85°C Enable / Disable Function 5 = Enable = Low 6 - Enable = High APR and Supply Voltage 2 = ±50 ppm 3.3 Vdc 155.25M Output Frequency Frequency Format -xxx.xM Minimum* -xxx.xxxxxxM Maximum* *Amount of numbers after the decimal point. M = MHz Example: To order an V752 with an output frequency of: 25 MHz = V752-025.0M 44.736 MHz = 752-044.736M 155.52 MHz = V752-155.52M Package Layout Models: V752 Enable / Disable Function (Pad 2) No Connection Low High Models: V762 Enable / Disable Function (Pad 2) No Connection High Low Suggested Pad Layout Output Enable Enable Disable (High Impedance) Output Enable Enable Disable (High Impedance) Pad Connections Pad 1: 2: 3: 4: 5: 6: Pad Connection Control Voltage Enable / Disable Ground (Case) Output Q Output Q Vcc Output Waveform Test Circuit Solder Profile Temperature Tape and Reel Dimensions 260°C 260°C 220°C 180°C 150°C 120°C 0 10 s Up to 120 s 60 to 90 s Typical Typical Meets IPC/JEDEC J-STD-020C Bulletin Page Revision Date Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches. © Copyright 2014 The Connor-Winfield Corporation Not intended for life support applications. Vx533 2 of 2 04 04 Nov 2014