MCX 241 Series PRODUCT SELECTION Control Voltage 4-10 VDC Description Zero-crossing Random Fire MCX241 MCX241R ol e OUTPUT SPECIFICATIONS (1) te • Mini-SIP SSR • Ratings to 1.5A @ 280 VAC • SCR output • DC control • Zero-crossing (resistive loads) or random-fire (inductive loads) output • Plastic encapsulated Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) Maximum Load Current [Arms] Minimum Load Current [Arms] Maximum Surge Current (16.6ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Minimum Power Factor (with Maximum Load) 12-280 600 0.1 200 1.5 0.025 40 1.5 0.5 12-280 600 0.1 200 1.5 0.025 40 1.5 0.5 4-10 VDC 4.0 VDC 1.0 VDC 15 mAdc 300 Ohm 1/2 Cycle 1/2 Cycle 4-10 VDC 4.0 VDC 1.0 VDC 15 mAdc 300 Ohm 0.1 1/2 Cycle INPUT SPECIFICATIONS (1) Description bs Control Voltage Range Must Turn On Voltage Must Turn Off Voltage Typycal Input Current @ 5 VDC Nominal Input Impedance Maximum Turn-On Time [msec] (4) Maximum Turn-Off Time [msec] GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz)(2) Minimum Insulation Resistance (@ 500 VDC)(2) O Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Dielectric and ins ulation resistence are measured between input and output 3) Off-State dv/dt test method per EIA/NARM standard RS-443 4) Turn on time or Random Turn on is 0.1 m sec Parameters 4000 Vrms 109 Ohm 8 pF -40 to 80°C -40 to 125°C 0.7 oz.(20g) Thermally Conductive Epoxy MECHANICAL SPECIFICATIONS ol e te DC CONTROL. PIN 1:+DC LOAD PIN 2: -DC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL bs THERMAL DERATE INFORMATION AGENCY APPROVALS O UL E116950 CSA LR81689 VDE 5921 UG Rev. 120810 O te ol e bs O bs ol e te ANNEX - ENVIROMENTAL INFORMATION