PF Series ol et e • SIP SSR • Ratings to 25A (forced air) @ 480 VAC • SCR output for heavy industrial loads • AC or DC control • Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION 25A 3-15 VDC 4-15 VDC 15-32 VDC 18-36 VAC 90-140 VAC PF240D25 PFE240D25 PFE240A25 PF240A25 25A PF380D25 PFE380D25 PF480D25 PFE480D25 op tio n O AVAILABLE OPTIONS 25A bs Control Voltage OUTPUT SPECIFICATIONS (1) Description -B Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) Maximum Load Current [Arms](3) Minimum Load Current [Arms] Maximum Surge Current (16.6ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum I²t for fusing (8.3 msec) [A² sec] Minimum Power Factor (with Maximum Load) PF240 PF380 PF480 12-280 600 0.1 500 Forced Air 25 Convection Air 10 0.06 250 1.6 260 0.5 48-530 1200 0.1 500 Forced Air 25 Convection Air 10 0.06 250 1.6 260 0.5 48-660 1200 0.1 500 Forced Air 25 Convection Air 10 0.06 250 1.6 260 0.5 INPUT SPECIFICATIONS (1) PF240D25 PF380D/480D PFExxxD25 PF240A25 PFE240A25 3-15 VDC 3.0 VDC 1.0 VDC 15 mAdc 300 Ohm 1/2 Cycle 1/2 Cycle 4-15 VDC 4.0 VDC 1.0 VDC 15 mAdc 240 Ohm 1/2 Cycle 1/2 Cycle 15-32 VDC 15.0 VDC 1.0 VDC 15 mAdc 1500 Ohm 1/2 Cycle 1/2 Cycle 90-140 VAC 90.0 Vrms 10.0 Vrms 10 mAdc 14.1 k Ohm 10 40 18-36 VAC 18.0 Vrms 2.0 Vrms 10 mAdc 2.1 k Ohm 10 40 Control Voltage Range Maximum Turn On Voltage Minimum Turn-Off Voltage Typical Input Current @ Nominal Voltage Nominal Input Impedance Maximum Turn-On Time [msec] (4) Maximum Turn-Off Time [msec] ol et e Description GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 VDC) 4000 Vrms 10 9 Ohm 8 pF -30 to 80˚C -30 to 125˚C 0.85 oz. (25g) Thermally Conductive Epoxy GEN ERAL NOTES MECHANICAL SPECIFICATIONS O 1) All parameters at 25°C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443,13.11.1 3) Heatsink temperature 85 ûC Maximum. 4) Turn-On Time for Random Turn-On versions 0.1 msec (DC Control Models) bs Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation n DC CONTROL. PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL tio AC CONTROL. PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: AC CONTROL PIN 4: AC CONTROL op UL E116950 VDE 70938(DC Control Only) -B THERMAL DERATE INFORMATION Rev. 061510 -B n tio op ol et e bs O -B op tio n O bs ol et e ANNEX - ENVIROMENTAL INFORMATION