ASO Series • Mini-SIP SSR • Ratings to 2A @ 280 VAC • SCR output • DC control • Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 4-10 VDC 1.5A 2A ASO241 ASO242 ASO241 ASO242 12-280 600 0.1 500 1.5 0.025 40 1.5 0.5 12-280 600 0.1 500 2.0 0.06 120 1.5 0.5 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) Maximum Load Current [Arms](3) Minimum Load Current [Arms] Maximum Surge Current (16.6ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Minimum Power Factor (with Maximum Load) INPUT SPECIFICATIONS (1) Description Control Voltage Range Must Turn On Voltage Must Turn Off Voltage Typical Input Current @ 5 VDC Nominal Input Impedance Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] Parameters 4-10 VDC 4.0 VDC 1.0 VDC 15 mAdc 300 Ohm 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz)(2) Minimum Insulation Resistance (@ 500 VDC)(2) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Dielectric and insulation resistence are measured between input and output 3) Off-State dv/dt test method per EIA/NARM standard RS-443 WIRING DIAGRAM MECHANICAL SPECIFICATIONS Parameters 2500 Vrms 10 9 Ohm 8.0 pF -30 to 80˚C -30 to 125˚C 0.07 oz. (1.9g) Thermally Conductive Epoxy THERMAL DERATE INFORMATION AGENCY APPROVALS E116950 LR81689 Rev. 072114 ANNEX - ENVIROMENTAL INFORMATION