LC Series • Mini-SIP SSR • Ratings to 2A @ 280 VAC • Dual SCR output (normally open) • DC control • Zero-crossing (resistive loads) or random-fire (inductive loads) output • Plastic encapsulated PRODUCT SELECTION Control Voltage 1.5A 2A 4-10 VDC LC241 LC242 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description LC241 LC242 12-280 12-280 Transient Overvoltage [Vpk] 600 600 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.1 0.1 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) 500 500 Operating Voltage (47-63Hz) [Vrms] Maximum Load Current [Arms] 1.5 2.0 Minimum Load Current [Arms] 0.025 0.025 Maximum Surge Current (16.6ms) [Apk] 80 100 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.5 1.5 Minimum Power Factor (with Maximum Load) 0.5 0.5 INPUT SPECIFICATIONS (1) Description Parameters Control Voltage Range 4-10 VDC Must Turn On Voltage 4.0 VDC Must Turn Off Voltage 1.0 VDC Typycal Input Current @ 5 VDC 15 mAdc Nominal Input Impedance 300 Ohm Maximum Turn-On Time [msec] (4) 1/2 Cycle Maximum Turn-Off Time [msec] 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz)(2) 2500 Vrms Minimum Insulation Resistance (@ 500 VDC)(2) 109 Ohm Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40 to 80˚C Ambient Storage Temperature Range -40 to 125˚C Weight (typical) 0.15 oz. (4.3g) Encapsulation UL94V-0Molded epoxy GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Dielectric and insulation resistence are measured between input and output. 3) Off-State dv/dt test method per EIA/NARM standard RS-443. 4) 0.1 msec for random turn-on version (R suffix). MECHANICAL SPECIFICATIONS DC CONTROL PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 E116950 Rev. 120911 ANNEX - ENVIROMENTAL INFORMATION