SDV Series • 16 Pin DIP SSR • Ratings to 1.5A @ 280 VAC • SCR output • 3.5-10Vdc control input • Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 3.5-10 VDC 1.5A 1.5A SDV2415 SDV2415R AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) Maximum Load Current [Arms](3) Minimum Load Current [Arms] Maximum Surge Current (16.6ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Minimum Power Factor (with Maximum Load) 12-280 600 0.01 500 1.5 0.025 30 1.2 0.5 INPUT SPECIFICATIONS (1) Description Control Voltage Range Control Current Range Must Turn On Voltage Must Turn On Current Must Turn Off Voltage Must Turn Off Current Typical Input Current @ 5 VDC Nominal Input Impedance Maximum Turn-On Time [msec] (4) Maximum Turn-Off Time [msec] SDV 3.5-10 VDC 3.5 VDC 1.0 VDC 15 mAdc 270 Ohm 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz)(2) Minimum Insulation Resistance (@ 500 VDC)(2) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation GENERAL NOTES 1) All parameters at 25¼°C unless otherwise specified. 2) Dielectric and insulation resistance are measured 3) Off-State dv/dt test method per EIA/NARM standard RS-443 Parameters 3750 Vrms 109 Ohm 2.0 pF -30 to 80°C -30 to 125°C 0.10 oz. (2.9g) Thermally Conductive Epoxy MECHANICAL SPECIFICATIONS WIRING DIAGRAM THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 116950 LR81689 Rev. 121211 ANNEX - ENVIROMENTAL INFORMATION