PART NUMBER NOMENCLATURE Single Channel (A) AC/DC Output Single Channel & AC Output Dual Channel Crydoms SeriesOne DR Solid State Relays were developed to offer the advantages of Crydom's thermal management technology in a compact 11 & 18 mm wide IP20 housing with unique integrated heat sink. The SeriesOne DR provides a quick and easy installation onto any standard 35 mm DIN rail profile paired with high output power ratings. Max Output Voltage 06: 1 to 60 VDC 10: 1 to 100 VDC 24: 24 to 280 VAC 48: 48 to 600 VAC Series DR 24 D INSTALLATION INSTRUCTIONS Please read all installation instructions before using SeriesOne DR SSRs. To install on DIN rail Install the relay on the DIN rail (as shown in drawing) Wire the relay to the input side. 22 AWG minimum, 16 AWG maximum To remove from Wire the relay to the output side. 22 AWG minimum, DIN rail 14 AWG x 2 or 12 AWG x 1 (standed/solid) maximum Maximum recommended terminal screw torque input 4.4 in/lbs (0.5 Nm) & output 7.0 in/lbs (0.8 Nm) If multiple units are installed be sure to follow derating curves (reverse side of this sheet) 12 R Control Voltage D: 4 to 32 VDC A: 208 to 265 VAC B: 90 to 140 VAC E: 18 to 36 VAC FEATURES Single channel 6 & 12 Amps output power rating Two independent 6 Amp channels in dual channel versions Single channel 60 & 100 VDC, 24 to 600 VAC operating voltage ratings Dual channel 24 to 600 VAC operating voltage ratings 4-32 VDC, 24, 120 & 230 VAC control input options available for single channel versions 4-32 VDC control input for dual channel versions AC Output versions with Zero Voltage Turn-On for resistive loads and Random Turn-On for inductive loads LED indicates only Input status. Does not represent Output status. Output Current 06: 6 Amps 12: 12 Amps AC Output Only Option Blank: Zero Voltage Turn-On R: Random Turn-On (AC Output Only) Dual Channel Series DRD Max Output Voltage 24: 24 to 280 VAC 48: 48 to 600 VAC 24 D Output Current 06: 6 Amps 06 Control Voltage D: 4 to 32 VDC Required for valid part number For options only and not required for valid part number (A) Not all combinations of ratings are available. R Option Blank: Zero Voltage Turn-On R: Random Turn-On (AC Output Only) Rev: 072310 WIRING DIAGRAMS (B) DERATING CURVES For DRDxxD06 versions dA Loa 1 1/A DC/AC CONTROL VOLTAGE AC SUPPLY DRxxx06 +3/A 1 1/A1 +3/A1 Load Current (Amps) For DRxxx06 or DRxxx12 versions 6.0 5.0 4.0 3.0 2.0 1.0 2 2/A 4/A 2 0.0 2/A2 4/A2 (E) d Loa B No grounding wire required. DC inductive loads must be diode suppressed. 4 Pin connector for dual channel ouput only. Matting connector: MOLEX 050579404 or equivalent. 4 Terminal screws Pozidriv #1, 3/16 in [4.8 mm]. Minimum wire strip lenght 0.20 in [5.1 mm], maximum 0.28 in [7.1 mm]. WARNING DANGER RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE • The product's side panels may be hot, allow the product to cool before touching. • Follow proper mounting instructions including torque values. • Do not allow liquids or foreign objects to enter this product. HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH Failure to follow these instructions can result in serious injury, or equipment damage. Failure to follow these instructions will result in death or serious injury. • Turn off power supply before working on this equipment. Load Current (Combined for Dual) [Amps] (D) 3/B1 (C) AC SUPPLY 4/B2 2/T1 1/L1 DC/AC SUPPLY Loa 10 20 30 40 50 60 70 80 70 80 Ambient Temperature (°C) INPUT INPUT STATUS STATUS INPUT STATUS DC CONTROL (C) +A -A +B -B d (B) 0 (D, E) (D, E) DRxxx12 & DRDxxD06 12.0 10.0 8.0 6.0 4.0 2.0 0.0 0 10 20 30 40 50 60 Ambient Temperature [°C] Installed single unit, distance to adjacent components ≥ 11 mm for DRxxx06 and ≥ 18 mm for DRxxx12 & DRDxxD06 Multiple units, no minimum spacing between components Rev: 072310