100" PIN HeADeRS

0.80mm SUB-MICRO HeADeRS
1.00mm MICRO HeADeRS
Adam Technologies, Inc.
.031" [0.80] & .039" [1.00] CenterlIne
MPh & SPh / MrS & SrS
INTRODUCTION:
Adam Tech 0.8mm and 1.00mm Pin Header and Female Header
series is a fine pitch, low profile, dual row, PCB mounted connector
set intended for limited space applications or where total weight is a
factor. Our specially tooled insulators and contacts maintain
consistent high quality through our automated production processes.
Each series is available in thru-hole PCB or SMT mounting and
plated tin, gold or selective gold as specified.
FEATURES:
0.8mm and 1.0mm versions
Pin Header and Female Header set
Lightweight and Compact
Hi Temp Insulators
0.8mm MALE ORDERING INFORMATION
20
SPH2
PLATING
U = Gold plated
SG = Selectively gold plated
T
= Tin plated
0.8mm FEMALE ORDERING INFORMATION
20
SRS2
SPECIFICATIONS:
Material:
Standard Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Phosphor Bronze
Plating:
U = Gold flash (30u” optional) over nickel underplate
SG = Gold flash (30u” optional) over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall.
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Mating durability: 500 cycles min.
Temperature Ratings:
Operating temperature: -40°C to +105°C
Max process temp: 230°C for 30 ~ 60 seconds
(260°C for 10 seconds)
Soldering process temperature: 260°C
SMT
MOUNTING
Blank = Thru-hole
SMT = Surface
mount
SERIES
INDICATOR
SPH2 = 0.8mm
Dual Row
Header
POSITIONS
04 thru 80
MATING OPTIONS:
Mates with all industry standard 0.8mm & 1.0mm pitch headers and
female headers
SG
SG
SMT
MOUNTING
Blank = Thru-hole
SMT = Surface
mount
SERIES
INDICATOR
SRS2 = 0.8mm
Dual Row
Female
Header
POSITIONS
04 thru 80
PLATING
U = Gold plated
SG = Selectively gold plated
T
= Tin plated
1.0mm MALE ORDERING INFORMATION
20
MPH2
SG
SMT
MOUNTING
Blank = Thru-hole
SMT = Surface
mount
SERIES
INDICATOR
MPH2 = 1.0mm
Dual Row
Pin Header
POSITIONS
04 thru 80
PLATING
U = Gold plated
SG = Selectively gold plated
T
= Tin plated
1.0mm FEMALE ORDERING INFORMATION
PACKAGING:
Anti-ESD plastic bags or tubes
20
MRS2
SG
SMT
APPROVALS AND CERTIFICATIONS:
UL Recognized & CSA Certified, File no. E224053
Pb
®
E
264
RoHS
US
C
COMPLIANT
2002 / 95 / EC
HI-TEMP
INSULATOR
®
AVA I L A B L E
SERIES
INDICATOR
MRS2 = 1.0mm
Dual Row
Female
Header
POSITIONS
04 thru 80
MOUNTING
Blank = Thru-hole
SMT = Surface
mount
PLATING
U = Gold plated
SG = Selectively gold plated
T
= Tin plated
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
0.8mm SUB-MICRO HeADeRS
1.00mm MICRO HeADeRS
Adam Technologies, Inc.
.031" [0.8] & .039" [1.00] CenterlIne
MPh & SPh / MrS & SrS
0.8mm SUB-MiCrO HeADerS
A
B
A
.120
[3.05]
SPH2-60-UA
B
.031 [0.80]
.047
[1.20]
SRS2-60-UA
.031 [0.80]
.120
[3.05]
.047
[1.20]
.078 [2.00]
.118
[3.00]
.082 [2.10]
.012 [0.30] SQ.
.039 [1.00]
A = .031 [.80] X No of Positions Per Row
B = .031 [.80] X No of Spaces Per Row
.110
[2.79]
0.8mm Male Header
SPH2 Series
.012 x .010
[0.3 x 0.2]
0.8mm Female Header
SRS2 Series
A = .031 [.80] X No of Positions Per Row
B = .031 [.80] X No of Spaces Per Row
A
B
A
B
.120
[3.05]
SPH2-60-UA-SMT
.031 [0.80]
.078 [2.00]
.047
[1.20]
.039 [1.00]
.047
[1.20]
SRS2-60-UA-SMT
.120
[3.05]
.031 [0.80]
.118
[3.00]
.051 [1.30]
.039
[1.00]
.127 [3.25]
.012 [0.30] SQ.
C
ø.025
[ø0.65]
A = .031 [.80] X No of Positions Per Row
B = .031 [.80] X No of Spaces Per Row
C = .031 [.80] X No of Spaces - 1
.039
[1.00]
.181
[4.60]
0.8mm SMT Male Header
SPH2 SMT Series
.012 x .008
[0.3 x 0.2]
C
.127 [3.25]
.181
[4.60]
ø.025
[ø0.65]
A = .031 [.80] X No of Positions Per Row
B = .031 [.80] X No of Spaces Per Row
C = .031 [.80] X No of Spaces - 1
0.8mm SMT Female Header
SRS2 SMT Series
1.0mm MiCrO HeADerS
A
B
A
.125
[3.17]
MPH2-60-UA
B
.039 [1.00]
.039
[1.00]
.039
[1.00]
MRS2-60-UA
.039 [1.00]
.075 [1.90]
.084
[2.12]
.012 [0.30] SQ.
.110
[2.79]
.059
[1.49]
1.0mm Male Header
MPH2 Series
A = .039 [1.00] X No of Positions Per Row
B = .039 [1.00] X No of Spaces Per Row
.039
[1.00]
.014 [.36]
A = .039 [1.00] X No of Positions Per Row
B = .039 [1.00] X No of Spaces Per Row
1.0mm Female Header
MRS2 Series
A
B
A
B
MPH2-60-UA-SMT
.125
[3.17]
.100
[2.54]
.039
[1.00]
.039 [1.00]
MRS2-60-UA-SMT
.039
[1.00]
.039 [1.00]
.075 [1.90]
.100
[2.54]
.084
[2.12]
.012 [0.30] SQ.
A = .039 [1.00] X No of Positions Per Row
B = .039 [1.00] X No of Spaces Per Row
.059
[1.49]
.205
[5.21]
.071
[1.80]
1.0mm SMT Male Header
MPH2-SMT Series
.014 [.36]
A = .039 [1.00] X No of Positions Per Row
B = .039 [1.00] X No of Spaces Per Row
.087 [2.21]
.150
[3.81]
1.0mm SMT Female Header
MRS2-SMT Series
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
265
.050" PIN HeADeRS
.050" [1.27] CenterlIne
Adam Technologies, Inc.
hPh SerIeS
INTRODUCTION:
Adam Tech .050" HPH Series Pin Headers are fine pitched, low
profile, PCB mounted pin headers intended for limited space
applications or where overall size is a factor. Our specially tooled
insulators and contacts offer consistent high quality through
automated production processes. This series offers an extensive
range of single, dual and stacked versions. Each is available in thruhole PCB or SMT mounting with choice of tin, gold or selective gold
plating.
FEATURES:
Single and Dual Row
Stacked, Thru-Hole and SMT mounting
Pin Header and Female Header sets
Lightweight and Compact
Hi Temp Insulator available
Choice of plating
ORDERING INFORMATION
B
HPH2
MATING OPTIONS:
Mates with all industry standard .050" [1.27mm] pitch female headers
designed for use with 0.4mm Sq. pins and Low profile receptacle
SPECIFICATIONS:
Material:
Standard Hi-Temp insulator: Nylon 6T or Nylon 46, rated UL94V-0
Insulator Color: Black
Contacts: Brass or Phosphor Bronze
Plating:
U = Gold flash over nickel underplate overall
SG = Gold flash over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩ max. Initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Mating durability: 500 Cycles min.
Temperature Rating:
HI-TEMP
Operating temperature: -40°C to +105°C
INSULATOR
Soldering process temperature: 260°C
AVA I L A B L E
PACKAGING:
Anti-ESD plastic bags
Pb
RoHS
APPROVALS AND CERTIFICATIONS:
UL Recognized & CSA Certified, File no. E224053
COMPLIANT
2002 / 95 / EC
®
®
C
US ®
E
SERIES
INDICATOR
HPH1 =
050" Single row
Pin Header
HPH2 =
.050" Dual Row
Pin Header
100
POSITIONS
01 thru 32
(single row)
04 thru 100
(dual row)
SMT = Dual Row Surface Mount leads with Hi-Temp insulator for Hi-Temp
soldering processes up to 260°C
SMT-A = Single Row Surface Mount Leads Type A
SMT-B = Single Row Surface Mount Leads Type B
P = Optional locating peg
266
A
MATING/
SOLDER-TAIL
LENGTH
A = Standard length
B = Special length,
customer specified,
defined as tail
length/total length
PLATING
SG = Selective gold
plating in
contact area
Tin plating
on solder tails
U = Gold Plated
T = Tin Plated
INSULATOR
SIZE
A = 1.00mm insulator thickness
single or dual row
(dual row .050"x.050")
B = .100" insulator thickness
single or dual row
(dual row .050"x.100")
ORDERING INFORMATION
DHPH
2
SERIES
INDICATOR
DHPH =
Dual insulator
®
.050" centerline
Pin Header
OPTIONS:
Add designator(s) to end of part number
HT = Hi-Temp insulator for Hi-Temp soldering processes up to 260°C
(Add this option for thru-hole products only. All SMT products are manufactured
with Hi-Temp insulators)
SG
NO. OF ROWS
1 = Single row .050"
2 = Dual row .050"x.100"
50
SG
.XXX"/.XXX"/.XXX"
(C DIM) (D DIM) (E DIM)
SPECIFIED IN INCHES
AS: C Dim./D Dim./E Dim.
(replace D Dim. with SMT
for surface mount option)
PLATING
SG = Selective gold plating in
contact area and Tin
plating on solder tails
U = Gold Plated
T = Tin Plated
POSITIONS
01 thru 50 (single row)
04 thru 100 (dual row)
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
.050" PIN HeADeRS
.050" [1.27] CenterlIne
Adam Technologies, Inc.
A = .050 [1.27] X No. of Positions
B = .050 [1.27] X No. of Spaces
hPh SerIeS
PIN 1
HPH1-A
.082 [2.10]
SINGLE ROW STRAIGHT
WITH 1.00mm INSULATOR
A
B
.050 [1.27]
Recommended
PCB Layout
PCB Layout
.039 [1.00]
B
.050 [1.27]
ø .026
[ 0.65]
.118 [3.00]
.090 [2.30]
HPH1-A-20-UA
.016 [0.40] SQ.
A = .050 [1.27] X No. of Positions
B = .050 [1.27] X No. of Spaces
PIN 1
A
B
.050 [1.27]
Recommended PCB Layout
PCB Layout
B
.050 [1.27]
Recommended PCB Layout
.018 [0.46] SQ.
.100 [2.54]
.105 [2.66]
PIN 1
HPH1-B-20-UA
HPH2-A
PIN 2
PCB Layout
B
.050 [1.27]
SINGLE ROW STRAIGHT
WITH .100" INSULATOR
.118 [3.00]
ø .030
[ 0.75]
A = .050 [1.27] X No. of Positions per row
B = .050 [1.27] X No. of Spaces
HPH1-B
.100 [2.54]
.136 [3.45]
A
B
.050 [1.27]
DUAL ROW STRAIGHT
WITH 1.00mm INSULATOR
.016 [0.40] SQ.
ø .026
[0.65]
.050 [1.27]
.039 [1.00]
.050
[1.27]
.118 [3.00]
.090 [2.30]
A = .050 [1.27] X No. of Positions per row
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
PIN 2
HPH2-B
.100 [2.54]
PIN 1
PCB Layout
B
.050 [1.27]
HPH2-A-40-UA
ø .030
[ 0.75]
DUAL ROW STRAIGHT
WITH .100" INSULATOR
A
B
.050 [1.27]
.197
[5.00]
.118 [3.00]
.100 [2.54]
.105 [2.66]
.100
[2.54]
HPH2-B-40-UA
.018 [0.46] SQ.
A = .050 [1.27] X No. of Positions
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
PCB Layout
B
.050 [1.27]
A
B
.050 [1.27]
SINGLE ROW STRAIGHT SMT
WITH 1.00mm INSULATOR
.016 [0.40] SQ.
.105 [2.68]
.189 [4.80]
.094 [2.40]
A = .050 [1.27] X No. of Positions
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
.118 [3.00]
HPH1-A-20-UA-SMT
.039 [1.00]
.030 [.76]
HPH1-B (SMT)
.082 [2.10]
PIN 1
SINGLE ROW STRAIGHT SMT
WITH .100" INSULATOR
A
B
.050 [1.27]
B
.050 [1.27]
.242 [6.15]
HPH1-A (SMT)
.082 [2.10]
PIN 1
.118 [3.00]
.094 [2.40]
.030 [.76]
.100 [2.54]
.018 [0.46] SQ.
.150 [3.81]
HPH1-B-20-UA-SMT
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
267
.050" PIN HeADeRS
.050" [1.27] CenterlIne
Adam Technologies, Inc.
A = .050 [1.27] X No. of Positions per row
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
ø .035
[ 0.90]
hPh SerIeS
PIN 2
PIN 1
PCB Layout
B
.094 [2.40]
.248 [6.30]
.050 [1.27]
A
B
.050 [1.27]
A = .050 [1.27] X No. of Positions per row
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
.016 [0.40]
SQ.
.050 [1.27]
.118 [3.00]
.039 [1.00]
optional peg
.066
[1.68]
ø .031 [ 0.80]
.027 [0.70]
HPH2-A (SMT)
.136 [3.45]
.217 [5.50]
PIN 2
Dwg. shown with optional peg
HPH2-B (SMT)
.100 [2.54]
PIN 1
B
A
B
.050 [1.27]
.094 [2.40]
.200
[5.08]
.287 [7.30]
.118 [3.00]
.100 [2.54]
.027 [0.70]
.050 [1.27]
A = .050 [1.27] X No. of Positions
B = .050 [1.27] X No. of Spaces
HPH2-B-40-UA-SMT
.018 [0.46] SQ.
PIN 1
Recommended PCB Layout
DHPH-1
.100 [2.54]
A
B
PCB Layout
C
B
.050 [1.27]
.100 [2.54]
ø.030
[0.75]
E
D
A = .050 [1.27] X No. of Positions per row
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
PIN 2
PIN 1
PCB Layout
B
.050 [1.27]
.197 [5.00]
C
.100 [2.54]
E
D
Recommended PCB Layout
DHPH-1-20-U-.079/.079/.354
DHPH-2
A
B
ø.030
[0.75]
A = .050 [1.27] X No. of Positions
B = .050 [1.27] X No. of Spaces
.018 [0.46] SQ.
.100 [2.54]
.100
[2.54]
.018 [0.46] SQ.
DHPH-2-32-U-.079/.079/.354
DHPH-1 (SMT)
.100 [2.54]
PIN 1
A
B
B
.050 [1.27]
C
.100 [2.54]
.189 [4.80]
E
.121 [3.08]
.150 [3.81]
.030 [0.76]
Recommended PCB Layout
PIN 2
DHPH-2 (SMT)
.100 [2.54]
PIN 1
A
B
B
.197 [5.00]
C
.121 [3.08]
.287 [7.30]
.100 [2.54]
E
.050 [1.27]
DHPH-1-10-U-.079/SMT-A/.3.54
.018 [0.46] SQ.
A = .050 [1.27] X No. of Positions per row
B = .050 [1.27] X No. of Spaces
268
HPH2-A-40-UA-SMT
.027 [0.70]
.018 [0.46] SQ.
.150
[3.81]
DHPH-2-40-U-.079/SMT/.3.54
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
.050" HeADeR Set
.050" [1.27] CenterlIne
Adam Technologies, Inc.
hSh & hFh SerIeS
MALe HeADer
PIN 2
PCB LAYOUT
Recommended
PCB Layout
B
C
C
.050 [1.27]
.130 [3.30]
PIN 1
Standard: With key & without peg
.211
[5.35]
A
ORDERING INFORMATION
A = .050 X No. of Spaces + .168 [4.27]
B = .050 X No. of Spaces + .074 [1.87]
C = .050 X No. of Spaces
.213
[5.40]
.094 [2.40]
50
HSH
G
PLATING
G = Gold plated
T = Tin plated
SG = Gold plating
in contact
area, tin
TOTAL
plated
POSITIONS
solder tails
10 thru 100
SERIES
INDICATOR
HSH = .050"
Shrouded
header
OPTIONS:
SMT = Surface mount leads with
PIN 2
PIN 1
PCB LAYOUT
C
B
C
ø .051
[ø 1.30]
.126 X .027
[3.20 X 0.70]
.050 [1.27]
.050 [1.27]
D
.211
[5.35]
A
.213
[5.40]
PIN 2
Standard: With key & with peg
A = .050 X No. of Spaces + .168 [4.27]
B = .050 X No. of Spaces + .074 [1.87]
C = .050 X No. of Spaces
D = .050 X No. of Spaces + .120 [3.05]
.039
[1.00]
.016 [0.40] SQ.
ø .039
[ø 1.00]
FeMALe HeADer
A
B
.050 [1.27]
.236
[6.00]
ø .027
[ø .70]
HSH-SMT SerieS
SHROUDED MALE HEADER
Recommended PCB Layout
PCB LAYOUT
.050 [1.27]
B
.050 [1.27]
PIN 1
.025 [0.65]
ORDERING INFORMATION
G
PLATING
G = Gold plated
T = Tin plated
SG = Gold plating
in contact
area, tin
TOTAL
plated
POSITIONS
solder tails
10 thru 100
SERIES
INDICATOR
HFH = .050"
Female
header
.050 [1.27]
.144
[3.65]
Standard: With key & without peg
.118
[3.00]
A = .050 X No. of Spaces + .068 [1.73]
B = .050 X No. of Spaces
C = .050 X No. of Spaces + .120 [3.05]
.173
[4.40]
.016 X .005
[0.40 X 0.12]
.054
[1.38]
.050
[1.27]
.106
[2.70]
HFH SerieS
SHROUDED FEMALE HEADER
Recommended PCB Layout
B
A
B
.050 [1.27]
ø .051
[ø 1.30]
.126 X .027
[3.20 X 0.70]
.016 X .005
[0.40 X 0.12]
OPTIONS:
SMT = Surface mount leads
.144
[3.65]
ø .033
[ ø 0.85]
ø .047 [ø1.20]
C
.050 [1.27]
C
.118
[3.00]
Standard: With key & with peg
A = .050 X No. of Spaces + .068 [1.73]
B = .050 X No. of Spaces
C = .050 X No. of Spaces + .120 [3.05]
.173
[4.40]
with Hi-Temp insulator
NP = No peg
NK = No Key
P = Peg option (thru hole only)
SHROUDED MALE HEADER
Recommended PCB Layout
Hi-Temp insulator
50
HSH SerieS
.050
[1.27]
.016 [0.40] SQ.
P = Peg option (thru hole only)
HFH
ø .026 [ø 0.65]
.050 [1.27]
.050 [1.27]
.216
[5.50]
HFH-SMT SerieS
SHROUDED FEMALE HEADER
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
269
.050" BOx HeADeRS
.050" x .050" & .050" x .100"
CenterlIne
Adam Technologies, Inc.
hBhr SerIeS
HBHR SERIES
Adam Tech HBHR Series .050" Box Headers are fine pitched, dual
row shrouded headers for use with dual row IDC female socket
connectors. Our low profile, space saving design has a center slot for
the socket’s polarization bump. Adam Tech’s Box Headers are
available in Straight PCB Mount, Right Angle PCB Mount and SMT
Mounting. Plating options include choice of Gold, Tin or Selective
Gold. SMT versions are manufactured with a Hi-Temp insulator.
Additional options include latches and custom pin lengths.
FEATURES:
Shrouded, insulated connection
Superior low profile design
Slot for IDC socket Polarization bump
Straight PCB, Right Angle PCB and SMT versions
Gold, Tin or Selective Gold plating
Options include Elevated types and integral latches
Hi-Temp insulator available
MATING RECEPTACLES:
Mates with all industry standard .050" [1.27mm] pitch dual row
IDC sockets
SPECIFICATIONS:
Material:
Standard insulator: PBT, glass reinforced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Brass
Plating:
G = Gold flash (30u” optional) over nickel underplate overall
SG = Gold flash (30u” optional) over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 500V AC for 1 minute
Temperature Rating:
Operating temperature: -40°C to +105°C
Soldering process temperature: 260°C
PACKAGING:
Anti-ESD plastic trays
Pb
RoHS
US
C
E
COMPLIANT
2002 / 95 / EC
HBHR
SERIES
INDICATOR
HBHR-B =
Box header
.050" x .050"
HBHR-A =
Box header
.050" x .100"
20
V
SG
MOUNTING
PLATING
ORIENTATION
G = Gold plated
V = Vertical
SG = Selective
mount
gold plating
H = Right angle
in contact
mount
area, tin
plated
solder tails
T = Tin plated
POSITIONS
10, 20, 30, 40,
50, 60, 70, 80,
90, 100
This series is availabe in an
elevated version similar to
our BHRE Series as shown
on pgs. 302-303
APPROVALS AND CERTIFICATIONS:
UL Recognized & CSA Certified, File no. E224053
®
ORDERING INFORMATION
HI-TEMP
INSULATOR
®
AVA I L A B L E
OPTIONS:
Add designator(s) to end of part number
30 = 30 µin gold plating in contact area
SMT = Surface mount leads with Hi-Temp insulator for Hi-Temp
soldering processes up to 260°C
HT= Hi-Temp insulator for Hi-Temp soldering processes
up to 260°C (Add this option for thru-hole products only.
All SMT products are manufactured with Hi-Temp insulators)
270
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
.050" BOx HeADeRS
.050" x .050" & .050" x .100"
CenterlIne
Adam Technologies, Inc.
hBhr SerIeS
.122
[3.10]
A
B
C
HBHr-B
HBHr-B
.050" X .050"
STRAIGHT
PCB MOUNT
.050" X .050"
RIGHT ANGLE
PCB MOUNT
A
B
C
.122
[3.10]
.050 [1.27]
.189
[4.8]
.189
[4.8]
.050 [1.27]
.197
[5.00]
.118
[3.0]
.197
[5.00]
.118 [3.00]
.050
[1.27]
.016 [0.40] SQ.
.050
[1.27]
.016 [0.40] SQ.
A = .050 [1.27] x No. of Spaces + .292 [7.43]
B = .050 [1.27] x No. of Spaces + .227 [5.77]
C = .050 [1.27] x No. of Spaces
A = .050 [1.27] x No. of Spaces + .292 [7.43]
B = .050 [1.27] x No. of Spaces + .227 [5.77]
C = .050 [1.27] x No. of Spaces
HBHr-A
A
B
C
HBHr-A
A
B
C
.050" X .100"
STRAIGHT
PCB MOUNT
.050" X .100"
RIGHT ANGLE
PCB MOUNT
.249
[6.32]
.249
[6.32]
.050 [1.27]
.050 [1.27]
.327
[8.30]
.216
[5.50]
.327
[8.30]
.216
[5.50]
.126 [3.20]
.100
[2.54]
.016 [0.40] SQ.
.016 [0.40] SQ.
A = .050 [1.27] x No. of Spaces + .349 [8.87]
B = .050 [1.27] x No. of Spaces + .255 [6.47]
C = .050 [1.27] x No. of Spaces
A = .050 [1.27] x No. of Spaces + .349 [8.87]
B = .050 [1.27] x No. of Spaces + .255 [6.47]
C = .050 [1.27] x No. of Spaces
.122
[3.10]
A
B
C
HBHr-B
.050" X .050" SMT
.189
[4.8]
.193
[4.90]
A = .050 [1.27] x No. of Spaces + .292 [7.43]
B = .050 [1.27] x No. of Spaces + .227 [5.77]
C = .050 [1.27] x No. of Spaces
.228
[5.80]
.236
[6.00]
HBHR-B
.050 [1.27]
ø.032 [0.80]
.050 [1.27]
.030
[0.76]
C
HBHR-A
.100 [2.54]
.205
[5.20]
.016 [0.40] SQ.
.100 [2.54]
ø.032 [0.80]
.050
[1.27]
.050 [1.27]
.094
[2.40]
SMT
Recommended PCB Layouts
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
271
.050" LAtCH HeADeRS
.050" x .050" & .050" x .100" CenterlIne
Adam Technologies, Inc.
hMhr SerIeS
INTRODUCTION:
Adam Tech HMHR Series .050'' Latch Headers are dual row,
PCB mounted, shrouded headers with latches for use with dual
row IDC female socket connectors. In addition to providing a
shock and vibration proof connection the locking latches also act
as ejectors to remove the mating socket. Our low profile, space
saving design has a center slot for the socket’s polarization bump.
Adam Tech’s Latch Headers are available in Straight PCB Mount,
Right Angle PCB and SMT Mounting. Plating options include
choice of Gold, Tin or Selective Gold
FEATURES:
Integral Latches provide Shock and Vibration Proof connection
Slot for IDC socket Polarization bump
Straight PCB, Right Angle PCB and SMT versions
Gold, Tin or Selective Gold plating
Elevated option available
Hi-Temp insulator available
MATING SOCKETS:
.050'' X .050'' & .050'' X .100'' Dual row IDC sockets
SPECIFICATIONS:
Material:
Insulator: PBT, glass reinforeced, rated UL94V-0
Insulator Color: Black (Gray optional)
Contacts: Brass
Plating:
U = Gold flash (30u” optional) over nickel underplate overall
SG = Gold flash (30u” optional) over nickel on contact area,
Tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 500V AC for 1 minute
Mechanical:
Mating durability: 500 Cycles min.
Temperature Rating:
Operating temperature: -55°C to +105°C
ORDERING INFORMATION
POSITIONS
10, 16, 20, 26,
30, 32, 34, 40,
44, 50, 52, 60,
64, 68, 70, 80,
100
MOUNTING ANGLE
V = Straight Mount
H = Right Angle Mount
SAFETY AGENCY APPROVALS:
UL Recognized & CSA Certified, File no. E224053
Pb
E
272
RoHS
US
C
V
SERIES
INDICATOR
HMHR =
.050" x .100"
2 row / 2 row
HMHR-A =
.050" x .100"
HMHR-B =
.050" x .050"
2 row / 4 row
PACKAGING:
Anti-ESD plastic trays
®
26
HMHR
COMPLIANT
2002 / 95 / EC
®
U
A
L
LATCHING
FEATURES
S = Short latches
(for sockets
w/o strain relief)
L = Long latches
(for sockets
w/strain relief)
N = No latches
PIN LENGTHS
A = Standard length
solder tail
B = Special length,
customer specified
CONTACT PLATING
U = Gold plated
SG = Gold plating in
contact area, Tin
plated solder tails
T = Tin plated
OPTIONS:
Add designator(s) to end of part number
SMT = Surface mount leads Dual row with Hi-Temp insulator
HT = High-temp insulator for high-temp soldering processes
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
.050" LAtCH HeADeRS
.050" x .050" CenterlIne
Adam Technologies, Inc.
hMhr SerIeS
HMHr-A
A
B
.050" X .050"
STRAIGHT PCB MOUNT
.050
[1.27]
.220
[5.60]
.050
[1.27]
HMHR-A-50-VUAS
C
B
.050
[1.27]
.326
[8.30]
.050
[1.27]
SQ. .015 [0.40]
Ø.031
[0.80]
.050
[1.27]
A = .050 [1.27] X No. of Spaces + .233 [5.92]
B = .050 [1.27] X No. of Spaces
C = .050 [1.27] X No. of Spaces + .621 [15.77]
Recommended PCB Layout
HMHr-A
.050" X .050"
RIGHT ANGLE PCB MOUNT
A
B
.050
[1.27]
.220
[5.60]
C
HMHR-A-34-HUAS
.326
[8.30]
B
.090
[2.30]
.050
[1.27]
SQ. .015 [0.40]
.050 [1.27]
.050
[1.27]
Ø.031
[0.80]
.050
[1.27]
A = .050 [1.27] X No. of Spaces + .233 [5.92]
B = .050 [1.27] X No. of Spaces
C = .050 [1.27] X No. of Spaces + .621 [15.77]
Recommended PCB Layout
HMHr-A
A
B
.050" X .050"
VERTICAL SMT
.050
[1.27]
.220
[5.60]
.050
[1.27]
HMHR-A-60-VUAS-SMT
C
B
.334
[8.50]
REF
.326
[8.30]
SQ. .015X [0.40]
A = .050 [1.27] X No. of Spaces + .233 [5.92]
B = .050 [1.27] X No. of Spaces
C = .050 [1.27] X No. of Spaces + .621 [15.77]
.050
[1.27]
.059
[1.50]
.248
[6.30]
.030 X .094
[0.76 X 2.40]
Recommended PCB Layout
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
273
.050" LAtCH HeADeRS
.050" x .100" CenterlIne
Adam Technologies, Inc.
hMhr SerIeS
HMHr-B
.050" X .100"
STRAIGHT PCB MOUNT
A
B
.323
[8.20]
.100 [2.54]
C
HMHR-50-VUAL
.602
[15.30]
.050
[1.27]
SQ. .018 [0.46]
.118
[3.00]
.075
[1.905]
A = .050 [1.27] X No. of Spaces + .306 [7.78]
B = .050 [1.27] X No. of Spaces
C = .050 [1.27] X No. of Spaces + .829 [21.07]
HMHr-B
.050" X .100" 4 ROW
RIGHT ANGLE PCB MOUNT
A
B
.323
[8.20]
.100 [2.54]
.106
[2.70]
C
.602
[15.30]
.050
[1.27]
HMHR-60-HUAL
.075
[1.905]
SQ. .018
[0.46]
A = .050 [1.27] X No. of Spaces + .306 [7.78]
B = .050 [1.27] X No. of Spaces
C = .050 [1.27] X No. of Spaces + .829 [21.07]
Latch Options
B
.050
[1.27]
.225
[5.715]
Ø.031
[0.80]
.807
[20.50]
Header with
Short Ejector/Latch
for Sockets without
Strain Reliefs
.952
[24.20]
Header with
Long Ejector/Latch
for Sockets with
Strain Reliefs
.075
[1.905]
Recommended PCB Layout
274
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
.050" LAtCH HeADeRS
.050" x .100" CenterlIne
Adam Technologies, Inc.
hMhr SerIeS
HMHr
.050" X .100"
STRAIGHT PCB MOUNT
A
B
.323
[8.20]
.100 [2.54]
HMHR-80-VUAS
C
.602
[15.30]
.050
[1.27]
SQ. .018 [0.46]
.118
[3.00]
.100
[2.54]
A = .050 [1.27] X No. of Spaces + .306 [7.78]
B = .050 [1.27] X No. of Spaces
C = .050 [1.27] X No. of Spaces + .829 [21.07]
HMHr
.050" X .100"
RIGHT ANGLE PCB MOUNT
A
B
.323
[8.20]
.100 [2.54]
.106
[2.70]
C
HMHR-50-HUAL
.602
[15.30]
.050
[1.27]
SQ. .018
[0.46]
A = .050 [1.27] X No. of Spaces + .306 [7.78]
B = .050 [1.27] X No. of Spaces
C = .050 [1.27] X No. of Spaces + .829 [21.07]
Latch Options
B
.050
[1.27]
.807
[20.50]
.100
[2.54]
Ø.031
[0.80]
Header with
Short Ejector/Latch
for Sockets without
Strain Reliefs
.952
[24.20]
Header with
Long Ejector/Latch
for Sockets with
Strain Reliefs
Recommended PCB Layout
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
275
.050" ReCePtACLe StRIPS
.050" [1.27] CenterlIne
Adam Technologies, Inc.
hrS SerIeS
INTRODUCTION:
Adam Tech HRS Series .050" Receptacle Strips are offered in a
multitude of sizes and profiles designed to satisfy most .050"
socket requirements. Available in Single and Dual rows they are
offered in Straight, Right Angle, SMT, Bottom Entry and Pass
Through PCB mounting styles. Each type has a specially
designed contact system which produces a high normal force
connection and is available with gold, tin or selective gold plating.
All are available with standard or Hi-Temp thermoplastic
insulators. Our SMT offering is available with optional pick and
place pads and tape & reel packaging.
FEATURES:
Broad range of sizes and profiles
Contact systems with high normal force
Choice of contact plating
SMT pick & place option
Optional Tape & reel packaging
MATING CONNECTORS:
Adam Tech HPH headers and all industry standard .050" pitch pin
headers with .016" [0.4mm] square pins
SPECIFICATIONS:
Material:
Insulator: Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Phosphor Bronze
Contact Plating:
G = Gold flash (30u” optional) over nickel underplate overall
SG = Gold flash (30u” optional) over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.375 lbs per contact max.
Withdrawal force: 0.125 lbs per contact min.
Temperature rating:
Operating temperature: -40°C to +105°C
PACKAGING:
Anti-ESD trays or tubes
(Tape and Reel optional for SMT option)
SAFETY AGENCY APPROVALS:
UL Recognized & CSA Certified, File no. E224053
Pb
®
US
C
E
276
RoHS
COMPLIANT
2002 / 95 / EC
HI-TEMP
®
INSULATOR
AVA I L A B L E
ORDERING INFORMATION
HRS
1A
50
SERIES
INDICATOR
HRS = .050"
Receptacle Strip
NO. OF ROWS / PROFILE
1A = Single Row, Standard Profile
1B = Single Row, Low Profile
1C = Single Row, .085" Height
2A = Dual Row, Standard
Profile .050"x.100"
2B = Dual Row, Low Profile
.050"x.100"
2C = Dual Row, Low Profile
.050"x.050"(SMT) or PCB
2F = Dual Row, Low Profile
.050"x.100"(SMT)
1F = Single Row (SMT)
.228" Height
1G = Single Row, .079" Height,
Top Entry, (SMT)
2E = Dual Row, .134" Height
.050"x.050" (SMT or PCB)
2F = Dual Row, .230" Height
.050"x.100"
2G = Dual Row, .085" Height
.050"x.050" (SMT)
G
A
SOLDER
TAIL LENGTH
A = Standard
solder tail for
.062"-.125"
PCB thickness
SMT = Surface mount
leads (2C, 2E,
2F, 2G only)
SMT-A = Surface mount
leads Type A
(1F, 1G only)
SMT-B = Surface mount
leadsType B
(1F, 1G only)
CONTACT
PLATING
G = Gold plated
T = Tin plated
SG = Gold plated contact area,
tin plated solder tails
NO. OF POSITIONS
Single Row: 02 thru 40
Dual Row: 04 thru 80
OPTIONS:
Add designator(s) to end of part number
30 = 30 µin gold plating in contact area
P = Guide Pegs
E = End Pegs
HT = Hi-Temp insulator for Hi-Temp soldering processes
up to 260°C (Add this option for thru-hole products only.
All SMT products are manufactured with Hi-Temp insulators)
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
.050" ReCePtACLe StRIPS
.079", .085", .181" & .335" heIGht
Adam Technologies, Inc.
hrS SerIeS
B
HrS-1B
B
HrS-2B
.050
[1.27]
.050
[1.27]
HRS-1B-12-GA
A
HRS-2B-24-GA
.197
[5.00]
A
.102 [2.60]
.181
[4.60]
.181
[4.60]
.118 [3.00]
.118 [3.00]
.050
[1.27]
.050
[1.27]
ø.018
[0.46]
ø.018
[0.46]
.100
[2.54]
HrS-2A
HrS-1A
B
.050 [1.27]
B
.050 [1.27]
.100
[2.54]
HRS-1A-12-GA
HRS-2A-24-GA
.098
[2.50]
A
.197
[5.00]
A
.335
[8.50]
.335
[8.50]
.106
[2.70]
.050
[1.27]
.106
[2.70]
.050
[1.27]
.015x.015
[0.38x0.38]
.015x.015
[0.38x0.38]
HrS-1G-SMT
HrS-2G-SMT
TOP ENTRY
PIN 1
TOP ENTRY
B
A
TYPE B
PIN 1
.100
[2.54]
HRS-1G-10-SG-SMT-B
.050
[1.27]
.050
[1.27]
B
HRS-2G-20-SG-SMT-P
B
.120
[3.05]
TYPE A
.071
[1.80]
A
.079 [2.00]
.050
[1.27]
.161
[4.10]
B-.050 [1.27]
.085
[2.15]
.165
[4.18]
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
277
.050" ReCePtACLe StRIPS
.134" & .228" heIGht .050" [1.27] CenterlIne
Adam Technologies, Inc.
hrS SerIeS
HrS-2e SMT
HrS-2e SMT
Ordering Information pg. 276
W/ OPTIONAL PEG
B
B
HRS-2E-20-SG-SMT-E
.050 [1.27]
.016 x .005 [0.40 x 0.12]
.134
[3.40]
.039 [1.0]
PEGS
OPTIONAL
B
.164
[4.18]
ø.051 [1.30]
.050 [1.27]
.083
[2.10]
.120
[3.05]
A
.134
[3.40]
.173
[4.40]
ø.037
[0.95]
.016 x .005 [0.40 x 0.12]
.120
[3.05]
A
A + .052 [1.32]
HRS-2E-20-SG-SMT
Shown with -E end
peg option
.050 [1.27]
.050 [1.27]
.050 [1.27]
.205
[5.20]
A + .052 [1.32]
RECOMENDED PCB LAYOUT
B - .050 [1.27]
B
ø.027
[0.70]
.164
[4.18]
PEGS
OPTIONAL
.050 [1.27]
.083
[2.10]
.205
[5.20]
.024x.061
[0.60x1.55]
B - .050 [1.27]
RECOMENDED PCB LAYOUT
Recommended PCB Layout
Recommended PCB Layout
A = .050 [1.27] X No. of Positions per row + .018 [0.46]
B = .050 [1.27] X No. of Spaces
A = .050 [1.27] X No. of Positions per row + .018 [0.46]
B = .050 [1.27] X No. of Spaces
HrS-1F-SMT
HrS-2F-SMT
TYPE B
B
B
.050 [1.27]
HRS-1F-12-SG-SMT-B
TYPE A
.098
[2.50]
A
.017 x .008 [0.42 x 0.20]
A = .050 [1.27] X No. of Positions + .008 [0.20]
B = .050 [1.27] X No. of Spaces
HRS-2F-24-SG-SMT
.201
[5.10]
A
.228
[5.80]
.228
[5.80]
278
.017 x .008
[0.42 x 0.20]
.100
[2.54]
.050 [1.27]
.024x.061
[0.60x1.55]
.146
[3.70]
B - .050 [1.27]
PEGS
OPTIONAL
.248
[6.30]
A = .050 [1.27] X No. of Positions per row + .008 [0.20]
B = .050 [1.27] X No. of Spaces
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
.050" ReCePtACLe StRIPS
.085" & .133" heIGht .050" [1.27] CenterlIne
Adam Technologies, Inc.
hrS SerIeS
HrS-1C
HrS-2C
SINGLE ROW
DUAL ROW
Ordering Information
pg. 276
B
B
.050
[1.27]
.050 [1.27]
HRS-1C-13-GA
.050 [1.27]
A = .050 [1.27] X No. of Pos. + .018 [0.46]
B = .050 [1.27] X No. of Spaces
B = .050 [1.27] X No. of Spaces
.071
[1.80]
A
HRS-2C-26-GA
A = .050 [1.27] X No. of Pos.
+ .018 [0.46]
.120
[3.05]
A
.085
[2.15]
.085
[2.15]
.061 [1.55]
.0165 x .004 [0.40 x 0.10]
.061 [1.55]
.050
[1.27]
.0165 x .004 [0.40 x 0.10]
HrS-2C-SMT
HrS-2C-SMT
DUAL ROW WITH END PEGS
DUAL ROW WITH UNDERSIDE PEGS
B
B
.050 [1.27]
.050 [1.27]
HRS-2C-20-SG-SMT-E
HRS-2C-20-SG-SMT
.050 [1.27]
.050 [1.27]
.120
[3.05]
A
.120
[3.05]
A
.090
[2.30]
.085
[2.15]
.085
[2.15]
.039 [1.0]
A + .052 [1.32]
PEGS
OPTIONAL
A = .050 [1.27] X No. of Pos. + .018 [0.46]
B = .050 [1.27] X No. of Spaces
.164
[4.18]
B – .050 [1.27]
A = .050 [1.27] X No. of Pos. + .018 [0.46]
B = .050 [1.27] X No. of Spaces
HrS-2e
HRS-1C
PCB LAYOUT
DUAL ROW
PEGS
OPTIONAL
.164
[4.18]
B
.050 [1.27]
ø.024
[0.60]
B
.050 [1.27]
HRS-2E-20-GA
HRS-2C & 2E
PCB LAYOUT
B
.050 [1.27]
.050 [1.27]
ø.024
[0.60]
.050 [1.27]
.120
[3.05]
A
ø.027 [0.70]
ø.037
[0.95]
.133
[3.40]
B
.050 [1.27]
ø.051 [1.30]
.094 [2.40]
.0165 x .004 [0.40 x 0.12]
.050
[1.27]
.083
[2.10]
.185
[4.70]
B - .050 [1.27]
BOTTOM PEG OPTION
A = .050 [1.27] X No. of Pos. + .018 [0.46]
B = .050 [1.27] X No. of Spaces
HRS-2C SMT
PCB LAYOUT
.020 x .051
[0.50 x 1.30]
A + .052 [1.32]
END PEG OPTION
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
279
2.00mm PIN HeADeRS
.079" [2.00] CenterlIne
Adam Technologies, Inc.
2Ph SerIeS
INTRODUCTION
Adam Tech 2PH & D2PH Series 2.0mm Pin Headers offer a full
range of fine pitched headers in a variety of configurations including
Single, Dual and Three rows, Straight & Right Angle in Thru-Hole or
SMT mounting. Their close tolerance .020" sq. posts are smoothly
finished and taper tipped to eliminate insertion damage to the PCB or
mating connector. Adam Tech 2.0mm Pin Headers can be easily cut
into exact sizes as required. Options include stacked insulator
versions and choice of tin, gold or selective gold plating. This series
is compatible with all industry standard 2.0mm pitch mating
connectors.
ORDERING INFORMATION
MATING RECEPTACLES:
Mates with all industry standard .050" pitch female headers
D2PH
280
40
SERIES
INDICATOR
D2PH = 2mm Dual
Insulator
Pin Header
SG
.xxx"/.xxx"/.xxx
“C” DIM.
“D” DIM.
“E” DIM.
PLATING
U = Gold plated
T = Tin plated
SG = Gold plating
in contact area
tin plating on
solder tails
STACKING DIMENSIONS
Specified In Inches As:
“C” Dim. / “D” Dim. / “E” Dim.
Replace “D” Dim. with “SMT”
for Surface Mount Option
POSITIONS
Single row: 2 thru 40
Dual row: 4 thru 80
OPTIONS: Add designator(s) to end of part number
SMT = Surface Mount leads Dual Row
SMT-A = Surface Mount leads Type A
SMT-B = Surface Mount Leads Type B
HT = Hi-Temp insulator for Hi-Temp soldering processes up to
260°C
INSULATOR
AVA I L A B L E
Pb
RoHS
US
1
NO. OF ROWS
1 = Single row
2 = Dual row
HI-TEMP
E
PLATING
U = Gold plated
T = Tin plated
SG = Selective gold
plating in contact
area, tin plating
on solder tails
ORDERING INFORMATION
DUAL INSULATOR HEADERS
PACKAGING:
Anti-ESD plastic bags
(Tape and Reel available for SMT option)
C
A
PIN LENGTH
A = Standard
length
B = Special
length,
customer
specified
defined as:
tail dim/total
length
POSITIONS
Single row: 1 thru 40
Dual row: 2 thru 80
SPECIFICATIONS:
Material:
Standard insulator: PBT, glass reinforced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Brass
Plating:
U = Gold flash (30u” optional) over nickel underplate overall
SG = Gold flash (30u” optional) over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Mating durability: 1,000 cycles
Temperature Rating:
Operating temperature: -40°C to +105°C
Soldering process temperature: 260°C
®
U
SERIES INDICATOR
2PH1 = 2.00mm Single
Row Straight
Pin Header
2PH2 = 2.00mm Dual
Row Straight
Pin Header
2PH1R = 2.00mm Single
Row Right
Angle Pin
Header
2PH2R = 2.00mm Dual
Row Right
Angle
Pin Header
FEATURES:
Single, Dual or Three Row
Tin, gold or selective gold plating options
Thru-hole or SMT mounting
Stacked and Custom length versions available
Versatile Breakaway design
Hi Temp Insulator available
APPROVALS AND CERTIFICATIONS:
UL Recognized & CSA Certified,
File no. E224053
40
2PH1
COMPLIANT
2002 / 95 / EC
®
(Add this option for thru-hole products only. All SMT products are
manufactured with Hi-Temp insulators)
L = Low profile 1.5mm insulator thickness
P = Locating pegs
BR = Board retention solder tails
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
2.00mm PIN HeADeRS
.079" [2.00] CenterlIne
Adam Technologies, Inc.
2Ph SerIeS
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
2PH1
.079 [2.00]
A
PIN 1
2PH1-16-UA
B
.079
[2.00]
.154 [3.90]
B
Ø .031 [0.80]
.110 [2.80]
.079
[2.00]
.079 [2.00]
.020 [0.51]
Recommended PCB Layout
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
2PH1r
A
.079 [2.00]
2PH1R-16-UA
PIN 1
B
.154 [3.90]
ø.031 [0.80]
.118
[3.00]
.079 [2.00]
.110 [2.80]
.079
[2.00]
B
.020 [0.51]
.079 [2.00]
Recommended PCB Layout
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
2PH2
.157 [4.00]
PIN 2
A
PIN 1
2PH2-32-UA
.079
[2.00]
B
.154
[3.90]
B
ø.031 [0.80]
.079 [2.00]
.079 [2.00]
.110 [2.80]
.079
[2.00]
.079 [2.00]
.020 [0.51] .sq
Recommended PCB Layout
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
2PH2r
A
PIN 2
.157 [4.00]
2PH2R-32-UA
PIN 1
.079
[2.00]
B
B
ø.031 [0.80]
.154 [3.90]
.079 [2.00]
.079 [2.00]
.118 [3.00]
.079 [2.00]
.079
[2.00]
.020 [0.51] .sq
.110 [2.80]
Recommended PCB Layout
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
281
2.00mm PIN HeADeRS
.079" [2.00] CenterlIne
Adam Technologies, Inc.
2Ph SerIeS
2PH1-SMT PIN 1
.079 [2.00]
TYPE B
2PH1 (SMT)
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
PIN 1
2PH1-15-UA-SMT
.079 [2.00]
TYPE A
Recommended PCB Layout
A
B
.079
[2.00]
.059
[1.50]
.086 [2.20]
.020
[0.50] Sq.
.079 [2.00]
2PH2-SMT
.157
[4.00]
.165
[4.20]
B
.079 [2.00]
.033
[0.85]
B
.033
[0.85]
.185
[4.70]
.185
[4.70]
.092 [2.35]
SMT-A
SMT-B
2PH2 (SMT)
A = .079" [2.00] x No. of positions
PIN 2
B = .079" [2.00] x No. of spaces
.157 [4.00]
PIN 1
2PH-26-UA-SMT
.079
[2.00]
A
B
Recommended PCB Layout
.059
[1.50]
.086 [2.20]
.079 [2.00]
D2PH-1
.244
[6.20]
.020
[0.50] Sq.
A
.033 [0.85]
.264
[6.70]
.102 [2.60]
D2PH-1
A = .079" [2.00] x No. of positions
.079 [2.00]
PIN 1
B
.079 [2.00]
.157
[4.00]
B = .079" [2.00] x No. of spaces
B
D2PH1-16-UA-.235 /.100 /.400
C
.079 [2.00]
Recommended PCB Layout
E
D
PIN 2
.079 [2.00]
A
ø .031 [0.80]
.079 [2.00]
.020 [0.50] Sq.
.079 [2.00]
B
D2PH-2
A = .079" [2.00] x No. of positions
B= ..079" [2.00] x No. of spaces
.157 [4.00]
PIN 1
.079 [2.00]
B
D2PH2-32-UA-.235 /.100 /.400
C
Recommended PCB Layout
.079 [2.00]
E
B
.079 [2.00]
.079 [2.00]
D
.079 [2.00]
282
.020 [0.50] Sq.
ø.031 [0.80]
.079 [2.00]
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
2.00mm HeADeRS & SHUNtS
.079" [2.00] CenterlIne
Adam Technologies, Inc.
2Ph SerIeS
D2PH-1 (SMT)
PIN 1
D2PH-1-SMT
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
.079 [2.00]
TYPE B
PIN 1
.079 [2.00]
TYPE A
D2PH-1-12-U-.100/SMT/.240
A
B
Recommended PCB Layouts
C
B
.079 [2.00]
.033
[0.85]
.079 [2.00]
E
.079 [2.00]
D2PH-2-SMT
.165
[4.20]
.020
[0.50] Sq.
.079 [2.00]
.092
TYPE B [2.35]
TYPE A
SMT-A
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
PIN 2
.092
[2.35]
.185
[4.70]
.129 [3.27]
B
.079 [2.00]
.033
[0.85]
SMT-B
RECOMENDED PCB LAYOUT
D2PH-2 (SMT)
.157 [4.00]
PIN 1
A
B
.079
[2.00]
D2PH-2-16-U-.145/SMT/.360
Recommended PCB Layouts
C
B
.079 [2.00]
E
.079 [2.00]
.129 [3.27]
MS2B
MS2B
.079
[2.00]
RIGID
SHORT
HANDLE
.078
[2.00]
.078 [2.00]
.157
[4.00]
.197
[5.00]
MS2H-2
MS2H-2
.157
[4.00]
.374
[9.50]
.078 [2.00]
.138
[3.50]
.177
[4.50]
MS2H-1
.102 [2.60]
MS2C
.079
[2.00]
.157
[4.00]
.078 [2.00]
.157
[4.00]
.264
[6.70]
.244
[6.20]
.020
[0.50] Sq.
.079 [2.00]
MS2A
MS2A
.079 [2.00]
.033 [0.85]
FLEXIBLE
LONG
HANDLE
.157 [4.00]
.441
[11.20]
.177
[4.50]
.079 [2.00]
.078
[2.00]
.177
[4.50]
.079 [2.00]
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
283
2.00mm BOx HeADeRS
.079" [2.00] CenterlIne
Adam Technologies, Inc.
2Bhr SerIeS
INTRODUCTION:
Adam Tech 2BHR Series 2.0mm Box Headers are dual row
shrouded headers for use with dual row IDC female socket
connectors. Our low profile, space saving design has a center slot for
the socket’s polarization bump. Adam Tech’s Box Headers are
available in Straight PCB Mount, Right Angle PCB Mount and SMT
Mounting. Plating options include choice of Gold, Tin or Selective
Gold. SMT versions are manufactured with a Hi-Temp insulator.
Additional options include latches and custom pin lengths.
FEATURES:
Shrouded, insulated connection
Superior low profile design
Slot for IDC socket Polarization bump
Straight PCB, Right Angle PCB and SMT versions
Gold, Tin or Selective Gold plating
Options include Elevated types and integral latches
Hi-Temp insulator available
ORDERING INFORMATION
MATING SOCKETS:
Adam Tech .079" [2.0mm] X .079” [2.0mm] dual row IDC sockets
2BHR
SPECIFICATIONS:
Material:
Standard insulator: PBT, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Brass
Plating:
U = Gold flash (30u” optional) over nickel underplate
SG = Gold flash (30u” optional) over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Mating durability: 500 cycles min.
Temperature Rating:
Operating temperature: -40°C to +105°C
Soldering process temperature:
Standard insulator: 235°C
Hi-Temp insulator: 260°C
PACKAGING:
Anti-ESD plastic trays
20
V
U
SERIES
INDICATOR
2BHR =
2mm Box Header
NO. OF
POSITIONS
08, 10, 14, 16, 20,
24, 26, 30, 34, 40,
44, 50, 60, 64
A
PIN LENGTH
A = Standard
solder tail
B = Special length,
customer
specified
SMT= Surface
Mount
CONTACT PLATING
U = Gold Plated
T = Tin Plated
SG = Gold Plating in contact
area, tin plated tails
MOUNTING ORIENTATION
V = Straight Mount
H = Right Angle Mount
This series is available in an
elevated version similar to
our BHRE Series as shown
on pgs. 302-303
HI-TEMP
INSULATOR
AVA I L A B L E
APPROVALS AND CERTIFICATIONS:
UL Recognized & CSA Certified,
File no. E224053
Pb
®
US
C
E
RoHS
COMPLIANT
2002 / 95 / EC
®
OPTIONS:
Add designator(s) to end of part number
30 = 30 µin gold plating in contact area
GY = Gray color insulator
HT = Hi-Temp insulator for Hi-Temp soldering processes up to
260°C (Add this option for thru-hole products only. All SMT
products are manufactured with Hi-Temp insulators)
284
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
2.00mm BOx HeADeRS
.079" [2.00] CenterlIne
Adam Technologies, Inc.
2Bhr SerIeS
2BHr-STrAiGHT
A
B
.173 [4.40]
.020 [0.50] SQ.
.157
[4.00]
2BHR-14-VUA
.216
[5.50]
B
.079 [2.00]
.220
[5.60]
.110 [2.80]
.079 [2.00]
.079
[2.00]
.079 [2.00]
ø.031 [0.80]
Recommended
PCB Layout
A = .079 [2.00] X No. of Spaces + .362 [9.20]
B = .079 [2.00] X No. of Spaces
2BHr-riGHT ANGLe
A
B
.173 [4.40]
.020
[0.50] SQ.
.216
[5.50]
.157
[4.00]
2BHR-14-HUA
B
.039
[1.00]
.220
[5.60]
.079 [2.00]
.079 [2.00]
.079 [2.00]
.079 [2.00]
ø.031 [0.80]
.114 [2.90]
Recommended
PCB Layout
A = .079 [2.00] X No. of Spaces + .362 [9.20]
B = .079 [2.00] X No. of Spaces
2BHr-SMT
A
B
.173 [4.40]
.020 [0.50] SQ.
.157
[4.00]
2BHR-14-VUA-SMT
B
.216
[5.50]
.220
[5.60]
.079 [2.00]
.238 [6.05]
.079 [2.00]
A = .079 [2.00] X No. of Spaces + .362 [9.20]
B = .079 [2.00] X No. of Spaces
.256
[6.50]
.295
[7.50]
.059 [1.50]
.039 [1.00]
Recommended
PCB Layout
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
285
2.00mm LAtCH HeADeR
.079" [2.00] CenterlIne
Adam Technologies, Inc.
2Mhr SerIeS
INTRODUCTION:
Adam Tech 2MHR Series 2mm Latch Headers are dual row, PCB
mounted, shrouded headers with latches for use with dual row
IDC female socket connectors. In addition to providing a shock
and vibration proof connection the locking latches also act as
ejectors to remove the mating socket. Our low profile, space
saving design has a center slot for the socket’s polarization bump.
Adam Tech’s Latch Headers are available in Straight PCB Mount,
Right Angle PCB and SMT Mounting. Plating options include
choice of Gold, Tin or Selective Gold
FEATURES:
Integral Latches provide Shock and Vibration Proof connection
Slot for IDC socket Polarization bump
Straight PCB, Right Angle PCB and SMT versions
Gold, Tin or Selective Gold plating
Elevated option available
Hi-Temp insulator available
MATING SOCKETS:
2mm X 2mm Dual row IDC sockets
SPECIFICATIONS:
Material:
Insulator: PBT, glass reinforeced, rated UL94V-0
Insulator Color: Black (Gray optional)
Contacts: Brass
Plating:
U = Gold flash (30u” optional) over nickel underplate overall
SG = Gold flash (30u” optional) over nickel on contact area,
Tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Mating durability: 500 Cycles min.
Temperature Rating:
Operating temperature: -40°C to +105°C
ORDERING INFORMATION
2MHR
44
V
SERIES
INDICATOR
2MHR =
2mm Shrouded
Header w/Latches
POSITIONS
10, 12, 14, 16, 20, 22,
24, 26, 30, 32, 34, 40,
44, 48, 50, 60, 64, 68
MOUNTING ANGLE
V = Straight Mount
H = Right Angle Mount
PACKAGING:
Anti-ESD plastic trays
SAFETY AGENCY APPROVALS:
UL Recognized & CSA Certified, File no. E224053
This series is availabe in an
elevated version similar to
our BHRE Series as shown
on pgs. 302-303
U
A
L
LATCHING
FEATURES
S = Short latches
(for sockets
w/o strain relief)
L = Long latches
(for sockets
w/strain relief)
N = No latches
PIN LENGTHS
A = Standard length
solder tail
B = Special length,
customer specified
CONTACT PLATING
U = Gold plated
SG = Gold plating in
contact area, Tin
plated solder tails
T = Tin plated
Pb
®
US
C
E
286
RoHS
COMPLIANT
2002 / 95 / EC
®
OPTIONS:
Add designator(s) to end of part number
HT = High-temp insulator for high-temp soldering processes
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
2.00mm LAtCH HeADeR
.079" [2.00] CenterlIne
Adam Technologies, Inc.
2Mhr SerIeS
2MHr
.079
[2.00]
STRAIGHT PCB MOUNT
.236
[6.00]
.160[4.06]
Y
X
[.394
[10.00]
.118
[3.00]
.079 [2.00]
2MHR-34-VUAS
.079
[2.00]
B
A
B
.079 [2.00]
.079
[2.00]
LATCH DIMENSIONS
X
Y
LONG LATCH
.775 [19.70]
.452 [11.50]
SHORT LATCH
.665 [16.90]
.342 [8.70]
A = .079 [2.00] X No. of Spaces + .697 [17.70]
B = .079 [2.00] X No. of Spaces
Ø.031
[0.80]
Recommended PCB Layout
2MHr
B
.079
[2.00]
RIGHT ANGLE PCB MOUNT
.079
[2.00]
.236
[6.00]
.160 [4.06]
Y X
.079
[2.00]
[.394
[10.00]
2MHR-60-HUAS
.118
[3.00]
A
B
.079 [2.00]
.079
[2.00]
LATCH DIMENSIONS
X
Y
LONG LATCH
.775 [19.70]
.452 [11.50]
SHORT LATCH
.665 [16.90]
.342 [8.70]
A = .079 [2.00] X No. of Spaces + .697 [17.70]
B = .079 [2.00] X No. of Spaces
Ø.031
[0.80]
Recommended PCB Layout
2MHr
.079
[2.00]
VERTICAL SMT MOUNT
.079
[2.00]
.236
[6.00]
.160[4.06]
Y X
2MHR-40-HUAS
[.394
[10.00]
B
.079 .047
[2.00] [1.20]
.299
[7.60]
B
A
LATCH DIMENSIONS
X
Y
LONG LATCH
.775 [19.70]
.452 [11.50]
SHORT LATCH
.665 [16.90]
.342 [8.70]
A = .079 [2.00] X No. of Spaces + .697 [17.70]
B = .079 [2.00] X No. of Spaces
.157
[4.00]
.394
[10.00]
Recommended PCB Layout
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
287
2.00mm ReCePtACLe StRIPS
.079" [2.00] CenterlIne
Adam Technologies, Inc.
2rS SerIeS
INTRODUCTION:
Adam Tech 2RS Series 2.00mm Receptacle Strips are offered in
several sizes and profiles designed to satisfy most 2.00mm socket
requirements. Available in Single and Dual rows, they are offered in
Straight, Right Angle, SMT, Bottom Entry and Pass Through PCB
mounting styles. Each type has a specially designed contact system
which uses a wiping mating action and produces a high normal force
connection with gold, tin or selective gold plating. All are available
with Standard or Hi-Temp Thermoplastic insulators. Our SMT
offering is available with optional pick and place pads and tape & reel
packaging.
FEATURES:
Single and dual row in straight, right angle and SMT mounting forms
Top, side and bottom entry versions
Plated full gold, full tin or duplex plated
Five different body heights
Standard PBT insulator or optional Hi Temp insulator
Tape and reel packaging available
ORDERING INFORMATION
2RS1
MATING CONNECTORS:
Adam Tech 2PH headers and all industry standard 2.0mm pin
headers with a .020” [0.5mm] square pin.
HI-TEMP
INSULATOR
AVA I L A B L E
SAFETY AGENCY APPROVALS:
UL Recognized & CSA Certified,
File no. E224053
Pb
®
US
C
E
288
RoHS
COMPLIANT
2002 / 95 / EC
G
SERIES INDICATOR
PLATING
2RS1= 2.00mm Single Row,
G = Gold plated
Vertical Mount,
SG = Gold plated
Receptacle
contact area,
2RS2 = 2.00mm Dual Row,
tin plated
Vertical Mount,
solder tails
Receptacle
T = Tin plated
2RS1R= 2.00mm Single Row,
Right Angle,
Receptacle
POSITIONS
2RS2R= 2.00mm Dual Row,
Single Row: 2 thru 40
Right Angle,
Dual Row: 4 thru 80
Receptacle
Four Row: 8 thru 120
2RS4 = 2.00mm 4 Row,
Vertical Mount,
Receptacle
2RS2BR = 2.00mm Dual Row,
Right Angle, 3-Sided
Contact Receptacle
2RS1H= 2.00mm Single Row, Vertical Mount,
.248” Height Receptacle
2RS2H= 2.00mm Dual Row, Vertical Mount,
.248” Height Receptacle
2RS2T = 2.00 mm Dual Row, Surface Mount,
.106” Height, Top Entry Receptacle
2RS2B= 2.00mm Dual Row, Surface Mount,
.106” Height, Bottom Entry Receptacle
SPECIFICATIONS:
Material:
Insulator: PBT, glass reinforeced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Phosphor Bronze
Contact Plating:
G = Gold flash (30u” optional) over nickel underplate overall
SG = Gold flash (30u” optional) over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.313 lbs per contact max.
Withdrawal force: 0.175 lbs per contact min.
Temperature Rating:
Operating temperature: -40°C to +105°C
PACKAGING:
Anti-ESD plastic trays
(Tape and Reel optional for SMT option)
40
®
OPTIONS:
Add designator(s) to end of part number
30 = 30 µin gold plating in contact area
SMT = SMT leads with Hi-Temp insulator dual row
SMT-A = SMT Single Row Type A with Hi-Temp insulator
SMT-B = SMT Single Row Type B with Hi-Temp insulator
P = Optional guide peg on SMT version
PP = Pick and place pad
HT = Hi-Temp insulator for Hi-Temp soldering processes
up to 260°C (Add this option for thru-hole products only.
All SMT products are manufactured with Hi-Temp insulators)
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
2.00mm ReCePtACLe StRIPS
.169" & .193" heIGht .079" [2.00] CenterlIne
Adam Technologies, Inc.
2rS SerIeS
2rS1
B
.094
[2.40]
A
.169
[4.30]
2RS1-15-G
.094 [2.40]
.079
[2.00]
B
.079 [2.00]
.02x.008 [0.5x0.2]
ø.028 [0.70]
A = .079 [2.00] X No. of Positions
B = .079 [2.00] X No. of Spaces
Recommended PCB Layout
2rS2
B
.079
[2.00]
.165
[4.20]
A
2RS2-32-G
.169
[4.30]
.094
[2.40]
.05x.008
[0.50x0.20]
.079
[2.00]
.079
[2.00]
B
.079 [2.00]
.079 [2.00]
A = .079 [2.00] X No. of Positions per row
B = .079 [2.00] X No. of Spaces
ø.028 [.70]
Recommended PCB Layout
2rS2Br
A
B
.079 [2.00]
.197 [5.00]
.063
[1.60]
.193
[4.90]
2RS2BR-28-G
.094
[2.40]
.024 X .006
[0.60 X 0.15]
.079
[2.00]
.183
[4.65]
B
.079 [2.00]
.183
[4.65]
A = .079 [2.00] X No. of Positions per row + .008 [0.20]
B = .079 [2.00] X No. of Spaces
ø.030
[0.79]
Recommended PCB Layout
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
289
2.00mm ReCePtACLe StRIPS
.110", .169" & .191" heIGht
Adam Technologies, Inc.
2rS SerIeS
B
.169 [4.30]
2rS1r
.110 [2.80]
.122 [3.10]
.079
[2.00]
2RS1R-14-G
.161
[4.10]
.02x.008
[0.50x0.20]
2RS1R
B
A
.079 [2.00]
.169 [4.30]
ø.028 [0.70]
A = .079 [2.00] X No. of Positions
B = .079 [2.00] x No of Spaces
Recommended PCB Layout
B
2rS2r
.191
[4.85]
.079 [2.00]
.079
[2.00]
.118
[3.00]
.193
[4.90]
.02x.008 [0.50x0.20]
2RS2R-32-G
2RS2R
B
.079 [2.00]
.079
[2.00]
.079
[2.00]
.283 [7.20]
ø.028 [0.70]
A = .079 [2.00] X No. of Positions Per Row
B = .079 [2.00] x No of Spaces
Recommended PCB Layout
B
2rS1-SMT
A = .079 [2.00] X No. of Positions
B = .079 [2.00] x No of Spaces
TYPE A
.079 [2.00]
2RS1-15-SG-SMT-A
2RS1-SMT
A
.079
[2.00]
.177
[4.50]
.169
[4.30]
B
.079 [2.00]
.200
[5.08]
.142
[3.60]
.020x.008 [0.50x0.20]
Recommended PCB Layout
B
.079 [2.00]
.165
[4.20]
A
290
.02x.008 [0.50x0.20]
B-.079 [2.00]
2RS2-32-SG-SMT
2RS2-SMT
.079 [2.00]
.169
[4.30]
.035
[.90]
2rS2-SMT
A = .079 [2.00] X No. of Positions Per Row
B = .079 [2.00] x No of Spaces
.079
[2.00]
.297
[7.55]
ø.039 [1.00]
Optional
Guide Peg
B
.079 [2.00]
.177
[4.50]
.236
[6.00]
.035x.090
[0.89x2.29]
.035x.098
[0.89x2.50]
.100 [2.55]
B-.079 [2.00]
ø.047
[1.20]
Recommended PCB Layout
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
2.00mm ReCePtACLe StRIPS
Adam Technologies, Inc.
.106" & .248" heIGht .079" [2.00] CenterlIne
2rS SerIeS
A = .079 [2.00] X No. of Positions
B = .079 [2.00] x No of Spaces
B
.079
[2.00]
A
2rS1H
2RS1H-16-G
.248
[6.30]
B
.094 [2.40]
.079 [2.00]
.020 x.016
[0.50x0.40]
.079 [2.00]
ø.031 [0.80]
Recommended PCB Layout
A = .079 [2.00] X No. of Positions Per Row
B = .079 [2.00] x No of Spaces
B
.157
[4.00]
A
2rS2H
2RS2H-32-G
B
.248
[6.30]
.079 [2.00]
.094 [2.40]
.079 [2.00]
.079 [2.00]
ø.031 [0.80]
.020 x.016
[0.50x0.40]
Recommended PCB Layout
2rS2T-SMT
A = .079 [2.00] X No. of Positions Per Row
B = .079 [2.00] x No of Spaces
B
TOP ENTRY SOCKET
.079 [2.00]
2RS2T-20-SG-SMT
.079
[2.00]
.165
[4.20]
A
.106 [2.70]
.039
[1.00]
.110 [2.80]
.02x.006 [0.50x0.15]
B - .079 [2.00]
ø.039 [1.00]
Optional
Guide Peg
B
.079 [2.00]
.268
[6.80]
ø.047
[1.20]
Recommended PCB Layout
2rS2B-SMT
A = .079 [2.00] X No. of Positions Per Row
B = .079 [2.00] x No of Spaces
B
.138 [3.50]
B-.079 [2.00]
.228 [5.80]
.035x.065
[0.89x1.65]
BOTTOM ENTRY SOCKET
.079 [2.00]
2RS2B-20-SG-SMT
2RS2-SMT (2.7MM HIGH)
.079
[2.00]
.106 [2.70]
.039
[1.00]
.02x.006 [0.50x0.15]
B - .079 [2.00]
B
.165
[4.20]
A
Optional
Guide Peg
.079 [2.00]
.268
[6.80]
.110 [2.80]
ø.039 [1.00]
.228 [5.80]
.035x.065
[0.89x1.65]
.079 [2.00]
B - .079 [2.00]
ø.047
[1.20]
Recommended PCB Layout
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
291
.100" PIN HeADeRS
.100" [2.54] CenterlIne
Adam Technologies, Inc.
Ph SerIeS
INTRODUCTION:
Adam Tech PH Series .100" Pin Headers are a full range headers
in a variety of configurations including Single, Dual and Three rows,
Straight or Right Angle in Thru-Hole or SMT mounting. Their close
tolerance .025" sq. posts are smoothly finished and taper tipped to
eliminate insertion damage to the PCB or mating connector. Adam
Tech Pin Headers can be easily cut into exact sizes as required.
Options include stacked insulator versions and choice of tin, gold
or selective gold plating. This series is compatible with all industry
standard .100" pitch pin headers.
FEATURES:
Single, Dual or Three Row
Tin, gold or selective gold plating options
Thru-hole or SMT mounting
Stacked and Custom length versions available
Versatile Breakaway design
Hi Temp Insulator available
MATING RECEPTACLES:
Mates with all industry standard receptacles accepting a .025"
square post on .100" [2.54mm] centerlines
SPECIFICATIONS:
Material:
Insulator: PBT, glass reinforeced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Brass
Plating:
U = Gold flash (30u” optional) over nickel underplate
SG = Gold flash (30u” optional) over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 3 Amps max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 2 oz lbs max.
Withdrawal force: .75 oz lbs min
Mating durability: 1000 cycles min.
Temperature Rating:
Operating temperature: -40°C to +105°C
Soldering process temperature:
Standard insulator: 235°C
Hi-Temp insulator: 260°C
PACKAGING:
Anti-ESD plastic bags
SAFETY AGENCY APPROVALS:
UL Recognized & CSA Certified, File no. E224053
Pb
®
US
C
E
292
RoHS
COMPLIANT
2002 / 95 / EC
HI-TEMP
INSULATOR
®
AVA I L A B L E
ORDERING INFORMATION
PH1
40
SERIES INDICATOR
PH1 = Single Row,
Straight
PH1RA = Single Row,
Right Angle,
High Profile
PH1RB = Single Row,
Right Angle,
Low Profile
PH2 = Dual Row,
Straight
PH2RA = Dual Row,
Right Angle
PH3 = Three Row,
Straight
PH3RA = Three Row,
Right Angle
POSITIONS
PH1: 1 thru 40
PH2: 2 thru 80
PH3: 3 thru 120
U
A
MATING/TAIL
LENGTH
A = Mating Length
("C" dim.) = .235"
Solder Tail
("D" dim.) = .120"
B = Mating Length
("C" dim.) = .318"
Solder Tail Length
("D" dim.) = .120"
Special lengths
available contact
factory
PLATING
U = Gold flash overall
V = 15 µin gold on mating
area 100 µin tin on
solder tail
W = 30 µin gold on mating
area 100 µin tin on
solder tail
T = 100 µin tin overall
SG = Gold flash on
mating area 100 µin
tin lead on solder tail
OPTIONS:
Add designator(s) to end of part number
SMT = Surface mount leads Dual row with Hi-Temp insulator
SMT-A = Surface mount leads Type A with Hi-Temp insulator
SMT-B = Surface mount leads Type B with Hi-Temp insulator
HT= Hi-Temp insulator for Hi-Temp soldering processes
up to 260°C (Add this option for thru-hole products only.
All SMT products are manufactured with Hi-Temp insulators)
L = Low profile 1.50 mm insulator thickness
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
.100" PIN HeADeRS
.100" [2.54] CenterlIne
Adam Technologies, Inc.
Ph SerIeS
PH1
A = .100 [2.54] X No. of Positions.
B = .100 [2.54] X No. of Spaces.
SINGLE ROW
.098 [2.50]
PIN 1
PH1-16-UA
A
B
Recommended PCB Layout
C
B
.098 [2.50]
D
.100 [2.54]
.025 [0.64] SQ.
.100 [2.54]
ø .040 [1.02]
PH2
A = .100 [2.54] X No. of Positions per row.
B = .100 [2.54] X No. of Spaces.
DUAL ROW
PIN 2
.197 [5.00]
PIN 1
PH2-32-UA
A
B
Recommended PCB Layout
C
B
.098 [2.50]
D
.100 [2.54]
.025 [0.64] SQ.
.100 [2.54]
.100 [2.54]
ø.040 [1.02]
.100 [2.54]
PH3
A = .100 [2.54] X No. of Positions per row.
B = .100 [2.54] X No. of Spaces.
TRIPLE ROW
PIN 3
.295
[7.50]
PIN 2
PIN 1
.200
[5.08]
A
B
PH3-48-UA
Recommended PCB Layout
C
B
.098 [2.50]
D
.100 [2.54]
.025 [0.64] SQ.
.100 [2.54]
.100 [2.54]
.200
[5.08]
.100 [2.54]
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
ø.040 [1.02]
293
.100" PIN HeADeRS
.100" [2.54] CenterlIne
Adam Technologies, Inc.
Ph SerIeS
PH1rB
PH1RA & PH1RB - SINGLE ROW
.098 [2.50]
SINGLE ROW
PIN 1
A
B
PH1RB-16-UA
.153
[3.90]
C
C
Recommended PCB Layout
.098 [2.50]
.100 [2.54]
B
.025 [0.64] SQ.
D
D
PH1RA
A = .100 [2.54] X No. of Positions.
B = .100 [2.54] X No. of Spaces.
.100 [2.54]
ø.040
[1.02]
PH2rA
A = .100 [2.54] X No. of Positions per row.
B = .100 [2.54] X No. of Spaces.
DUAL ROW
PIN 2
PH2RA - DUAL ROW
.197 [5.00]
PIN 1
A
B
PH2RA-32-UA
.100 [2.54]
PCB LAYOUT
C
.098 [2.50]
.100 [2.54]
Recommended PCB Layout
B
.153 [3.90]
.100 [2.54]
D
.025 [0.64] SQ.
.100 [2.54]
A = .100 [2.54] X No. of Positions per row.
B = .100 [2.54] X No. of Spaces.
ø.040 [1.02]
PH3rA
TRIPLE ROW
PIN 3
PIN 2
PH3RA - TRIPLE ROW
.295 [7.50]
PIN 1
A
B
PH3RA-48-UA
.100 [2.54]
C
.098 [2.50]
PCB LAYOUT
Recommended PCB Layout
B
.153 [3.90]
.100 [2.54]
.100 [2.54]
294
.025 [0.64] SQ.
D
.200
[5.08]
.100 [2.54]
ø.040 [1.02]
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
.100" PIN HeADeRS
.100" [2.54] SurFaCe Mount
Adam Technologies, Inc.
PIN 1
Ph SerIeS
PIN 1
.098 [2.50]
TYPE A
PH1
A = .100 [2.54] X No. of Positions.
B = .100 [2.54] X No. of Spaces.
.098 [2.50]
TYPE B
SMT-SINGLE ROW
PH1-15-UA-SMT-B
Recommended PCB Layout
A
B
B
.100 [2.54]
C
.098 [2.50]
.100 [2.54
.130 [3.30]
.216
[5.50]
.197
[5.00]
.025
[0.64] SQ
.039
[1.00]
.039
[1.00]
.079 [2.00]
RECOMENDED PCB LAYOUT
SMT-A
TYPE A
TYPE
B
SMT-B
PH2
A = .100 [2.54] X No. of Positions per row.
B = .100 [2.54] X No. of Spaces.
PIN 2
B
.100 [2.54]
SMT-DUAL ROW
.197 [5.00]
PIN 1
PH2-26-UA-SMT
A
B
.100 [2.54]
B
.100 [2.54]
.039 [1.00]
C
.098 [2.50]
.100 [2.54]
.130 [3.30]
.295
[7.50]
.025 [0.64] SQ.
.315
[8.00]
.079 [2.00]
Recommended
PCB
Layout
RECOMENDED PCB
LAYOUT
PH1rB
A = .100 [2.54] X No. of Positions.
B = .100 [2.54] X No. of Spaces.
PIN 1
SMT-SINGLE ROW
.098 [2.50]
A
B
PH1RB-10-UA-SMT
C
B
.100 [2.54]
.039 [1.00]
.098 [2.50]
.180 [4.57]
.100 [2.54]
PIN 2
PIN 1
.079 [2.00]
0.154
[3.90]
Recommended
PCB
Layout
RECOMENDED PCB
LAYOUT
.197 [5.00]
A
B
PH2rA
A = .100 [2.54] X No. of Positions per row.
B = .100 [2.54] X No. of Spaces.
.100 [2.54]
SMT-DUAL ROW
PH2-20-UA-SMT
C
B
.100 [2.54]
.039 [1.00]
.098 [2.50]
.180 [4.57]
.216
[5.50]
.100 [2.54]
.079 [2.00]
Recommended PCB Layout
RECOMENDED PCB LAYOUT
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
295
.100" PIN HeADeRS
dual InSulator .100" [2.54] CenterlIne
Adam Technologies, Inc.
dPh SerIeS
DPH-1
.098
[2.50]
.098
[2.50]
B
.098
[2.50]
B
.098
[2.50]
C
C
E
E
D
.100
[2.54]
.025 [0.64] SQ.
.100 [2.54]
.217
[5.50]
.100
[2.54]
ø.040
[1.02]
.040
[1.00]
B
DPH-1-10-U-.220/.100/.350
Recommended PCB Layout
RECOMENDED PCB LAYOUT
DPH-2
.197
[5.00]
.025 [0.64] SQ.
.100
[2.54]
B
DPH-1-12-U-.200/SMT/.220-A
Recommended PCB Layout
RECOMMENDED PAD LAYOUT
DPH-2-SMT
A
A
.197 [5.00]
.197 [5.00]
.100
[2.54]
B
.098
[2.50]
B
.100
[2.54]
.098
[2.50]
C
C
E
E
D
.100
[2.54]
.100
[2.54]
DPH-1-SMT
.098 [2.50]
A
.098 [2.50]
A
.100
[2.54]
.025
[0.64] SQ.
B
.100 [2.54]
.025 [0.64] SQ.
B
.100
[2.54]
.100 [2.54]
.315
[8.00]
.295
[7.50]
.040 [1.00]
.059
[1.50]
ø.040 [1.02]
DPH-2-22-U-.220/.100/.350
Recommended
PCB
Layout
RECOMENDED
PCB
LAYOUT
Recommended PCB Layout
RECOMENDED PAD LAYOUT
DPH-2-16-U-.250/SMT/.300
ORDERING INFORMATION
DPH
2
20
SERIES INDICATOR
DPH = Dual insulator
.100" centerline
NO. OF ROWS
1 = Single row
2 = Dual row
3 = Triple row
POSITIONS
1 thru 40 (single row)
4 thru 80 (dual row)
3 thru 120 (triple row)
A = .100 [2.54] x No. of Positions.
B = .100 [2.54] x No. of Spaces.
296
.XXX"/.XXX"/.XXX"
SG
(C DIM) (D DIM) (E DIM)
PLATING
U = Gold plated
T = Tin plated
SG = Gold plating
in contact
area, tin plating
on solder tails
SPECIFIED IN INCHES AS:
C Dim. / D Dim. / E Dim.
(replace D Dim. with SMT
for surface mount option)
RECOMMENDED PCB LAYOUT
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
MINI SHUNtS
.050", 2mm, .100" & .200" CenterlIne
Adam Technologies, Inc.
MS SerIeS
INTRODUCTION:
Adam Tech MS Series Mini Shunts are available in .050", 2.0mm,
.100" and .200" centerlines. They quickly and easily jump individual
pins on pin headers to perform manual programming on PCB’s. This
series offers a broad range of sizes, shapes and colors. Shunts are
designed with detents at top for easy fingertip installation and
removal. Options include integrated pull tabs and gang types which
are molded in one piece. This series is extremely low cost and is a
highly economical, cost effective solution to replacing PCB switches.
Adam Tech’s shunts are available in Gold or Tin plating.
FEATURES:
Electrically connects two or more pin header posts
Wide variety of bodies and styles to choose from
Superior insulator design provides easy Fingertip extraction
Pull Tab and Ganged options available
Choice of Gold or Tin-plated contact area
Side and end stackable
ORDERING INFORMATION
MATING OPTIONS:
Mates with .025" sq. pin headers on .100" centers and all industry
standard pin headers with .025" square post on .100" [2.54mm]
centerlines.
MSB
PLATING
BODY STYLE/HEIGHT
G = Gold plated
MSA = Closed top, .256"
T = Tin plated
MSB = Open top, .236"
MSC = Open top, .177"
MSDA = Closed top, .315"
MSDB = Open top, .315"
MSBH = Handle-top, .531"
HMSA = .050" Mini Shunt (1 x 2)
HMSB = .050" Mini Shunt (2 x 2)
HMSC = .050" Mini Shunt, .118"
MSE = Closed top, 3 position
MST = 10 piece strip
MSBG = Ganged, block type
(Specify # of positions, 2 thru 10)
SPECIFICATIONS:
Material:
Insulator: PBT, rated UL94V-0
Insulator Color: Black
Contacts: Phosphor Bronze
Contact Plating:
G = Gold flash (30u” optional) over nickel underplate overall
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 3 Amps max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 1.57 lbs max.
Withdrawal force: .65 lbs min
Mating durability: 50 Cycles Gold
20 Cycles Tin
Temperature Rating:
Operating temperature: -40°C to +105°C
2.00mm Shunts - Pg. 283
OPTIONS:
Add designator(s) to end of part number
30 = 30 µin gold plating in contact area
PACKAGING:
Anti-ESD plastic bags
SAFETY AGENCY APPROVALS:
UL Recognized & CSA Certified, File no. E224053
Pb
®
RoHS
US
C
E
G
COMPLIANT
2002 / 95 / EC
®
STANDARD INSULATOR COLOR IS BLACK
Other insulator colors available
Add designator(s) to end of part number
R = Red *
B = Blue *
W = White *
Y = Yellow *
G = Green *
* Minimum order required
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
297
.100" MINI SHUNtS
.100" [2.54] CenterlIne
Adam Technologies, Inc.
MS SerIeS
MSA
MSB
.100"
.100"
.055 [1.40]
.256 [6.50]
.236 [6.00]
.197 [5.00]
.095 [2.40]
.100 [2.54]
.197 [5.00]
MSC
MSDA
.100"
.100"
.100 [2.54]
.095 [2.40]
.055 [1.40]
.315 [8.00]
.177 [4.50]
.095 [2.40]
.197 [5.00]
.100 [2.54]
.197 [5.00]
.100 [2.54]
MSDB
.094 [2.40]
MSBH
.100"
.100"
.055 [1.40]
.531 [13.50]
.315 [8.00]
.197 [5.00]
.100 [2.54]
HMSA (1 x 2)
HMSB (2 x 2)
.050"
.050"
.098
[2.50
MSe
.078
[2.00
.256
[6.50]
.216
[5.50
.118
[3.00]
A - .100 [2.54] X No of Positions
B = .100 [2.54] X No of Spaces
.100 [2.54]
.094 [2.40]
.200" 3P JUMPER
.098
[2.50
.216
[5.50
.197 [5.00]
.094 [2.40]
.118
[3.00]
.299 [7.60]
.098 [2.50]
.200 [5.08]
MSBG
MST
.100" GANGED BLOCK
.100"
10 pc.
STRIP
A
B
.197
[5.00]
.197 [5.00]
.248 [6.30]
2.43
[61.70]
.236 [6.00]
.100 [2.54]
298
.100 [2.54]
.248 [6.30]
.094 [2.40]
.197 [5.00]
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
.100" BOx HeADeRS
.100" x .100" [2.54 x 2.54] CenterlIne
Adam Technologies, Inc.
Bhr SerIeS
INTRODUCTION:
Adam Tech BHR Series .100" Box Headers are a dual row shrouded
header for use with dual row IDC female socket connectors. Our low
profile, space saving design has a center slot for the socket’s
polarization bump. Adam Tech’s Box Headers are available in
Straight PCB Mount, Right Angle PCB Mount and SMT Mounting.
Plating options include choice of Gold, Tin or Selective Gold. SMT
versions are manufactured with a Hi-Temp insulator. Additional
options include latches and custom pin lengths.
FEATURES:
Superior low profile design
Slot for IDC socket Polarization bump
Straight PCB, Right Angle PCB and SMT versions
Gold, Tin or Selective Gold plating
Options include Elevated types and integral latches
Hi-Temp insulator available
ORDERING INFORMATION
50
BHR
MATING SOCKETS:
Adam Tech .100" X .100" dual row IDC sockets
SPECIFICATIONS:
Material:
Insulator: PBT, glass reinforeced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black (Gray optional)
Contacts: Brass
Plating:
U = Gold flash (30u” optional) over nickel underplate
SG = Gold flash (30u” optional) over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Mating durability: 500 cycles min.
Temperature Rating:
Operating temperature: -40°C to +105°C
SERIES
INDICATOR
BHR = .100"
Box Header
V
U
MOUNTING
ORIENTATION
V = Straight
Mount
H = Right Angle
Mount
NO. OF
POSITIONS
08, 10, 14, 16,
20, 24, 26, 30,
34, 40, 44, 50,
60, 64
A
PIN LENGTH
A = Standard
solder tail
B = Special length,
customer
specified
SMT = Surface
Mount
CONTACT PLATING
U = Gold Plated
T = Tin Plated
SG = Gold Plating in contact
area, tin plated tails
PACKAGING:
Anti-ESD plastic trays
SAFETY AGENCY APPROVALS:
UL Recognized & CSA Certified, File no. E224053
Pb
®
RoHS
US
C
E
COMPLIANT
2002 / 95 / EC
HI-TEMP
INSULATOR
®
AVA I L A B L E
OPTIONS:
Add designator(s) to end of part number
LL =Box header with long latches
SL =Box header with short latches
30 = 30 µin gold plating in contact area
GY=Gray color insulator
HT= Hi-Temp insulator for Hi-Temp soldering processes
up to 260°C (Add this option for thru-hole products only.
All SMT products are manufactured with Hi-Temp insulators)
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
299
.100" BOx HeADeRS
.100" x .100" [2.54 x 2.54] CenterlIne
Adam Technologies, Inc.
Bhr SerIeS
A
B
C
BHr
STRAIGHT PCB MOUNT
.025 [0.64] SQ.
.346
[8.80]
.177 [4.50]
BHR-34-VUA
.346
[8.80]
.358
[9.10]
C
.100 [2.54]
.130 [3.30]
.100 [2.54]
.100 [2.54]
.100 [2.54]
ø.040 [1.02]
A = .100 [2.54] X No. of Positions /2 + .300 [7.62]
B = .100 [2.54] X No. of Positions /2 + .200 [5.08]
C = .100 [2.54] X No. of Spaces
Recommended PCB Layout
BHr
A
B
C
RIGHT ANGLE PCB MOUNT
.025 [0.64] SQ.
.356
[9.05]
.346
[8.80]
.177 [4.50]
.346
[8.80]
.358
[9.10]
BHR-34-HUA
.072 [1.84]
C
.100
[2.54]
.100 [2.54]
.100 [2.54]
.134 [3.40]
.100 [2.54]
ø.040 [1.02]
A = .100 [2.54] X No. of Positions /2 + .300 [7.62]
B = .100 [2.54] X No. of Positions /2 + .200 [5.08]
C = .100 [2.54] X No. of Spaces
Recommended PCB Layout
BHr
A
B
C
SURFACE MOUNT
.025 [0.64] SQ.
.346
[8.80]
.177 [4.50]
C
.346
[8.80]
.413
[10.50]
.100 [2.54]
A = .100 [2.54] X No. of Positions /2 + .300 [7.62]
B = .100 [2.54] X No. of Positions /2 + .200 [5.08]
C = .100 [2.54] X No. of Spaces
300
BHR-30-VSG-SMT
.100 [2.54]
.374
[9.50]
.413
[10.50]
.060 [1.50]
.039 [1.00]
Recommended PCB Layout
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
.100" BOx HeADeR W/LAtCHeS
.100" x .100" [2.54 x 2.54] CenterlIne
Adam Technologies, Inc.
Bhr SerIeS
BHr
STRAIGHT MOUNT BOX HEADER
WITH LATCHES
A
AB
BC
C
.354
[9.00]
.354
[9.00]
.429 .429
[10.90] [10.90]
.197 [5.00]
.197
[5.00]
BHR-34-VUA-LL
.405
[10.30]
Y
X
.405
[10.30]
Y
X
.126 [3.20]
.126 [3.20]
.025 [0.64] SQ.
.100 [2.54]
.100
[2.54]
.025 [0.64] SQ.
A = .100 [2.54] X No. of Positions /2 + .301
B = .100 [2.54] X No. of Positions /2 + .189
C = .100 [2.54] X No. of Positions /2
BHr
RIGHT ANGLE MOUNT BOX HEADER
WITH LATCHES
A
B
AC
B
C
.429
[10.90]
.354
[9.00]
.429
[10.90]
.197 [5.00]
.405
[10.30]
.354
[9.00]
.197
[5.00]
X
.405
[10.30]
Y
X
Y
BHR-34-HUA-LL
.100
[2.54]
.025 [0.64] SQ.
.100 [2.54]
.100
[2.54]
.025 [0.64] SQ.
C
.100 [2.54]
.126
[3.20]
.100 [2.54]
.126
[3.20]
A = .100 [2.54] X No. of Positions /2 + .301
B = .100 [2.54] X No. of Positions /2 + .189
C = .100 [2.54] X No. of Positions /2
LATCH TYPE
.100
[2.54]
LONG LATCH (-LL)
SHORT LATCH (-SL)
DIMENSIONS
X
Y
1.035 [26.30]
.575 [14.60]
.901 [22.90]
.417 [10.60]
ø.040 [1.02]
Recommended PCB Layout
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
301
.100" eLevAteD BOx HeADeRS
.100" x .100" [2.54 x 2.54] CenterlIne
Adam Technologies, Inc.
Bhre SerIeS
INTRODUCTION:
Adam Tech BHRE Series Elevated Box Headers provide all of the
advantages of our standard Box Headers such as our Low Profile
design, snug fit & polarized mating but have additional plastic
insulators in place to stabilize rows of pins for stacking
applications. This series is available in Straight, Right Angle &
SMT mounting with standard or customer specified Stacking
Heights and PCB tail lengths.
FEATURES:
Elevated for Stacking applications
Low Profile design
Straight, Right Angle & SMT mounting options
Standard or customer specified Stacking
Heights & PCB tail lengths
MATING SOCKETS:
Adam Tech .100" X .100" dual row IDC sockets
SPECIFICATIONS:
ORDERING INFORMATION
MATERIAL:
Insulator: PBT, glass reinforeced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black (Gray optional)
Contacts: Brass
PLATING:
U = Gold flash (30u” optional) over nickel underplate
SG = Gold flash (30u” optional) over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
ELECTRICAL:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩmax. initial
Insulation resistance: 5000 MΩmin.
Dielectric withstanding voltage: 1000V AC for 1 minute
TEMPERATURE RATING:
Operating temperature: -40°C to +105°C
PACKAGING:
Anti-ESD plastic trays
SAFETY AGENCY APPROVALS:
UL Recognized & CSA Certified, File no. E224053
Pb
RoHS
US
C
50
SERIES
INDICATOR
BHRE =
.100'' Elevated
Box Header
POSITIONS
10, 14, 16, 20,
24, 26, 30, 34,
40, 50, 60, 64
MOUNTING ANGLE
V = Vertical
H = Horizontal
MECHANICAL:
Mating durability: 500 cycles min.
®
BHRE
COMPLIANT
2002 / 95 / EC
V
U
A
XXX
HEIGHT DIM X
Customer specified
in Inches.
PIN LENGTHS
A = Standard
solder tail
B = Special length,
solder tail
customer specified
SMT = Surface Mount
CONTACT PLATING
U = Gold plated
T = Tin plated
SG = Gold plating in
contact area,
Tin on tails
OPTIONS:
Add designator(s) to end of part number
30 = 30u'' Gold on contact area
GY = Gray color insulator
HT = Hi-Temp insulator for Hi-Temp soldering processes
up to 260°C (Add this option for thru-hole products only.
All SMT products are manufactured with Hi-Temp insulators)
HI-TEMP
®
INSULATOR
AVA I L A B L E
E
302
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
.100" eLevAteD BOx HeADeRS
Adam Technologies, Inc.
.100" x .100" [2.54 x 2.54] CenterlIne
Bhre SerIeS
BHre
ELEVATED STRAIGHT
PCB MOUNT
BHRE-26-VUA-.477
ø
BHre
ELEVATED RIGHT ANGLE
PCB MOUNT
BHRE-26-HUA-.477
ø
BHre
ELEVATED SMT
BHRE-20-VU-SMT-.477
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
303
.100" LAtCH HeADeR
.100" x .100" [2.54 x 2.54] CenterlIne
Adam Technologies, Inc.
Mhr SerIeS
INTRODUCTION:
Adam Tech MHR Series .100" pitch Latch Headers are dual row,
PCB mounted, shrouded headers with latches for use with dual
row IDC female socket connectors. In addition to providing a
shock and vibration proof connection the locking latches also act
as ejectors to remove the mating socket. Our low profile, space
saving design has a center slot for the socket’s polarization bump.
Adam Tech’s Latch Headers are available in Straight PCB Mount,
Right Angle PCB and SMT Mounting. Plating options include
choice of Gold, Tin or Selective Gold
FEATURES:
Integral Latches provide Shock and Vibration Proof connection
Slot for IDC socket Polarization bump
Straight PCB, Right Angle PCB and SMT versions
Gold, Tin or Selective Gold plating
Elevated option available
Hi-Temp insulator available
MATING SOCKETS:
.100" X .100" Dual row IDC sockets
SPECIFICATIONS:
Material:
Insulator: PBT, glass reinforeced, rated UL94V-0
Insulator Color: Black (Gray optional)
Contacts: Brass
Plating:
U = Gold flash (30u” optional) over nickel underplate overall
SG = Gold flash (30u” optional) over nickel on contact area,
Tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 3 Amps max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Mating durability: 500 Cycles min.
Temperature Rating:
Operating temperature: -40°C to +105°C
ORDERING INFORMATION
MHR
V
SERIES
INDICATOR
MHR = .100"
Shrouded
Header
with
Latches
POSITIONS
10, 14, 16, 20,
24, 26, 30, 34,
40, 50, 60, 64
MOUNTING ANGLE
V = Straight Mount
H = Right Angle Mount
PACKAGING:
Anti-ESD plastic trays
SAFETY AGENCY APPROVALS:
UL Recognized & CSA Certified, File no. E224053
This series is availabe in an
elevated version similar to
our BHRE Series as shown
on pgs. 302-303
Pb
®
US
C
E
304
40
RoHS
COMPLIANT
2002 / 95 / EC
®
U
A
L
LATCHING
FEATURES
S = Short
latches
(for sockets
w/o strain
relief)
L = Long
latches
(for sockets
w/strain
relief)
N = No latches
PIN LENGTHS
A = Standard length
solder tail
B = Special length,
customer specified
CONTACT PLATING
U = Gold plated
SG = Gold plating in
contact area, Tin
plated solder tails
T = Tin plated
OPTIONS:
Add designator(s) to end of part number
GY = Gray color insulator
HT = High-temp insulator for high-temp soldering processes
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
.100" LAtCH HeADeR
.100" x .100" [2.54 x 2.54] CenterlIne
Adam Technologies, Inc.
Mhr SerIeS
MHr
Latch Options
STRAIGHT PCB MOUNT
A = .100 [2.54] x No. of Spaces + .860 [21.84]
B = .100 [2.54] x No. of Spaces + .460 [11.68]
C = .100 [2.54] x No. of Spaces
.443
[11.27]
A
.921
[23.40]
.331
[8.40]
Header with Short Ejector/Latch for
Sockets without Strain Reliefs
.025 [0.64] SQ.
.100 [2.54]
MHR-26-VUAL
.171 [4.35]
.578
[14.70
1.094
[27.80]
.677 [17.20]
.134
[3.40]
C
B
.100 [2.54]
Header with Long Ejector/Latch for
Sockets with Strain Reliefs
MHr
RIGHT ANGLE PCB MOUNT
A = .100 [2.54] x No. of Spaces + .860 [21.84]
B = .100 [2.54] x No. of Spaces + .460 [11.68]
C = .100 [2.54] x No. of Spaces
A
C
.331
[8.40]
.025 [0.64] SQ.
.100 [2.54]
MHR-26-HUAL
.171 [4.35]
.921 [23.40]
.677 [17.20]
.100
[2.54]
B
.157 [4.00]
C
ø.040 [1.02]
.100 [2.54]
.100 [2.54]
Recommended PCB Layout
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
305
.100" RECEPTACLE STRIPS
SINGLE AND DUAL ROW
.100" [2.54] CENTERLINE
Adam Technologies, Inc.
RS SERIES
INTRODUCTION:
Adam Tech RS Series .100" pitch Receptacle Strips are a series of
sockets offered in a multitude of sizes and profiles designed to satisfy
most .100" pitch socket requirements. Available in Single, Dual and
Triple row, they are offered in Straight, Right Angle, SMT, Bottom
Entry and Pass Through PCB mounting styles. Each type has a
specially designed contact system which uses a wiping mating action
and produces a high normal force connection with gold, tin or
selective gold plating. All are available with Standard or Hi-Temp
Thermoplastic insulators. Our SMT offering is available with optional
pick and place pads and tape & reel packaging.
FEATURES:
Broad range of sizes and profiles
Contact systems with high normal force
Choice of contact plating
SMT pick & place option
Optional Tape & reel packaging
ORDERING INFORMATION
RS1
MATING CONNECTORS:
Adam Tech PH series .100" pitch pin headers and all industry
standard pin headers with a .025" (0.64mm] square pin.
SPECIFICATIONS:
Material:
Insulator: PBT, glass reinforeced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Phosphor Bronze
Contact Plating:
G = Gold flash (30u” optional) over nickel underplate overall
SG = Gold flash (30u” optional) over nickel underplate on contact
area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 3 Amps max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.375 lbs per contact max.
Withdrawal force: 0.125 lbs per contact min.
Temperature Rating:
Operating temperature: -40°C to +105°C
PACKAGING:
Anti-ESD plastic trays
(Tape and Reel optional for SMT option)
HI-TEMP
INSULATOR
SAFETY AGENCY APPROVALS:
UL Recognized & CSA Certified,
File no. E224053
AVA I L A B L E
Pb
®
RoHS
COMPLIANT
2002 / 95 / EC
US
C
E
SERIES INDICATOR
RS1 = Single row vertical
mount receptacle
RS1R = Single row right
angle mount
receptacle
RS2 = Dual row vertical
mount receptacle
RS2R = Dual row right
angle mount
receptacle
RSB = Dual row straight
PCB mount with
polarization bump
and keyed corner
contacts
RSBR = Dual row right
angle PCB mount
with polarization
bump and keyed
corner contacts
RSE1 = Single row
elevated recepticle
RSE2 = Dual row elevated
recepticle
RSM1 = Single row
surface mount
RSM2 = Dual row
surface mount
12
G
PLATING
G = Gold plated
T = Tin plated
SG = Gold plating in
contact area,
Tin Plated
solder tails
POSITIONS
Single row: 1 thru 40
Dual row: 2 thru 80
OPTIONS:
Add designator(s) to end of part number
SMT = SMT Dual row with Hi-Temp insulator
SMT-A = SMT Single Row Type A with Hi-Temp insulator
SMT-B = SMT Single Row Type B with Hi-Temp insulator
30 = 30 µin gold plating in contact area
P® = Optional guide peg on SMT version
HT = Hi-Temp insulator for Hi-Temp soldering processes
up to 260°C (Add this option for thru-hole products only.
All SMT products are manufactured with Hi-Temp insulators)
306
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAm-TECh.COm
.100" RECEPTACLE STRIPS
ORDERING INFORmATION
Adam Technologies, Inc.
RECEPTACLE STRIPS
FOUR SIDED CONTACT
PAGE 309, 310 & 314
26
RS1B
SERIES INDICATOR
RS1B = Single row, vertical
mount 4-sided contact
receptacle strip
RS2B = Dual row, vertical
mount 4-sided contact
receptacle strip
RS1BR = Single row, right
angle mount, 3-sided contact
receptacle strip
RS2BR = Dual row, right
angle mount, 3-sided contact
receptacle strip
RECEPTACLE STRIPS
LOW PROFILE
PAGE 313
G
RS1L
PLATING
G = Gold plated
T = Tin plated
SG = Gold plated
contact area,
tin plated solder
tails
SERIES
INDICATOR
RS1BE = Single row,
vertical mount, bottom,
pass through or dual
entry receptacle strip
RS2BE = Dual row,
vertical mount, bottom,
pass through or dual
entry receptacle strip
RS2BE-A = Dual row,
with single sided
footprint, vertical mount,
bottom, pass through
or dual entry receptacle
strip
40
G
PLATING
G = Gold plated
POSITIONS
Single Row: 2 thru 40
Dual Row: 4 Thru 80
SOLDER TAIL
FOOTPRINT
A = .100" x .150"
B = .100" x .200"
C = .100" x .300"
Blank = Single row
PLATING
G = Gold plated
T = Tin plated
POSITIONS
Single row: 2 thru 40
Dual row : 4 thru 80
RECEPTACLE STRIPS
BOTTOM, PASS THROUGH OR DUAL ENTRY
PAGE 307, 315 & 316
A
G
SERIES
INDICATOR
RS1L = Single row,
.224" body height
RS2L = Dual row,
.224" body height
POSITIONS
Single row: 2 thru 40
Dual row: 4 thru 80
RS2BE
34
RECEPTACLE STRIPS
VERY LOW PROFILE
PAGE 308
RSVL
2A
SERIES
INDICATOR
RSVL =
Vertical Mount,
very low profile
receptacle strip
PROFILE / NO. OF ROWS
1A = Single row, .138" body height
1B = Single row, .205" body height
2A = Dual row, .138" body height
2B = Dual row, .205" body height
10
G
PLATING
G = Gold plated
T = Tin plated
POSITIONS
Single Row: 2 Thru 36
Dual Row: 4 Thru 72
OPTIONS:
Add designator(s) to end of part number
A = Type A PCB Layout
B = Type B PCB Layout
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAm-TECh.COm
307
.100" RECEPTACLE STRIPS
.138" & .205" hEIGhT SINGLE AND DUAL ROW
Adam Technologies, Inc.
RS SERIES
RSVL-1A
Ordering Information pg. 307
A
B
.118 [3.00]
RSVL-1A-18-G
.138 [3.50]
.016x.022
[0.40x0.55]
B
.130 [3.30]
.016
[0.40]
.100 [2.54]
ø.039 [1.00]
A = .100 [2.54] X No. of Positions
B = .100 [2.54] X No. of Spaces
Recommended PCB Layout
A
B
.216 [5.50]
RSVL-2A
.100 [2.54]
RSVL-2A-38-G
.138 [3.50]
.016x.022
[0.40x0.55]
B
.130 [3.30]
.016
[0.40]
.100 [2.54]
.100 [2.54]
ø.039 [1.00]
A = .100 [2.54] X No. of Positions Per Row
B = .100 [2.54] X No. of Spaces
Recommended PCB Layout
RSVL-1B
A
B
.118 [3.00]
RSVL-1B-18-G
.205 [5.20]
.016x.022
[0.40x0.55]
B
.130 [3.30]
.016
[0.40]
.100 [2.54]
ø.039 [1.00]
A = .100 [2.54] X No. of Positions
B = .100 [2.54] X No. of Spaces
Recommended PCB Layout
RSVL-2B
A
B
.216 [5.50]
.100 [2.54]
RSVL-2B-36-G
.205 [5.20]
.016x.022
[0.40x0.55]
.130 [3.30]
.016
[0.40]
B
.100 [2.54]
.100 [2.54]
ø.039 [1.00]
A = .100 [2.54] X No. of Positions Per Row
B = .100 [2.54] X No. of Spaces
308
Recommended PCB Layout
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAm-TECh.COm
.100" RECEPTACLE STRIPS
.335" hEIGhT, .100" [2.54] CENTERLINE
Adam Technologies, Inc.
RS SERIES
RS1
Ordering Information pg. 306
B
.094 [2.40]
.100 [2.54]
RS1-12-G
A
.335 [8.50]
B
.100 [2.54]
.118 [3.00]
.024x.016
[0.60x0.40]
ø.040 [1.02]
Recommended PCB Layout
A = .100 [2.54] X No. of Positions +.020 [0.50]
B = .100 [2.54] X No. of Spaces
RS1R
B
.094 [2.40]
A
RS1R-09-G
B
.335 [8.50]
.100 [2.54]
.063 [1.60]
.100 [2.54]
.114
[2.90]
.024x.016
[0.60x0.40]
ø.040 [1.02]
Recommended PCB Layout
A = .100 [2.54] X No. of Positions +.020 [0.50]
B = .100 [2.54] X No. of Spaces
RS1BR
A
.125
[3.18]
RS1BR-13-G
.028X.010
[0.70X0.25]
B
.138
[3.50]
.100 [2.54]
.315
[8.00]
.310
[7.87]
ø.040
[1.02]
B
.310 [7.87]
.100
[2.54]
Recommended PCB Layout
A = .100 [2.54] X No. of Positions
B = .100 [2.54] X No. of Spaces
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAm-TECh.COm
309
.100" RECEPTACLE STRIPS
.335" hEIGhT, .100" [2.54] CENTERLINE
Adam Technologies, Inc.
RS SERIES
RS2
Ordering Information pg. 306
B
.100 [2.54]
.100 [2.54]
.197
[5.00]
A
RS2-24-G
B
.335 [8.50]
.100 [2.54]
.118 [3.00]
.100 [2.54]
.100
[2.54]
.024 x .016
[0.60 x 0.40]
ø.040 [1.02]
Recommended PCB Layout
A = .100 [2.54] x No. of Positions per row +.020 [0.50]
B = .100 [2.54] x No. of Spaces
RS2R
B
.100 [2.54]
.197
[5.00]
A
RS2R-14-G
B
.335 [8.50]
.100 [2.54]
.100 [2.54]
.063 [1.60]
.100 [2.54]
.024 x .016
[0.60 x 0.40]
ø.040 [1.02]
.114
[2.90]
Recommended PCB Layout
A = .100 [2.54] x No. of Positions per row +.020 [0.50]
B = .100 [2.54] x No. of Spaces
RS2BR
A
.100 [2.54]
.174
[4.43]
.230
[5.85]
.028 x .010
[.700 x .250]
RS2BR-28-G
.138
[3.50]
B
.100 [2.54]
.315
[8.00]
A = .100 [2.54] x No. of Positions per row
B = .100 [2.54] x No. of Spaces
310
.310
[7.87]
ø.040
[1.02]
B
.310 [7.87]
.100
[2.54]
Recommended PCB Layout
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAm-TECh.COm
.100" RECEPTACLE STRIPS
Adam Technologies, Inc.
SmT .283" hEIGhT, .100" [2.54] CENTERLINE
RS SERIES
RSM1
Ordering Information pg. 306
B
.100 [2.54]
B
.039 [1.00]
TYPE B
B
.205
[5.20]
.075
[1.90]
TYPE A
RSM1-10-SG-SMT-A
TYPE A
Recommended PCB Layout
.098
[2.50]
A
B
.283
[7.20]
.100 [2.54]
.020 x .010
[0.50 x 0.25]
.100 [2.54]
.295 [7.50]
.075 [1.90]
.205
[5.20]
.165
[4.20]
.075
[1.90]
TYPE B
A = .100 [2.54] x No. of Positions
B = .100 [2.54] x No. of Spaces
Recommended PCB Layout
RSM2
B
.100 [2.54]
.100 [2.54]
RSM2-20-SG-SMT
.197
[5.00]
A
.283 [7.20]
.020 x .010 [0.50 x 0.25]
B - .100 [2.54]
A = .100 [2.54] x No. of Positions per row
B = .100 [2.54] x No. of Spaces
Optional
Guide Peg
ø.039 [1.00]
.295 [7.50]
B
.100 [2.54]
.264
[6.70]
.303
[7.70]
.039 x .075
[1.00 x 1.90]
.154 [3.90]
B - .100 [2.54]
ø.047
[1.20]
Recommended PCB Layout
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAm-TECh.COm
311
.100" RECEPTACLE STRIPS
.335" hEIGhT WITh POLARIzING BUmP
Adam Technologies, Inc.
RS SERIES
RSB
Ordering Information pg. 306
B
.100 [2.54]
.100
[2.54]
RSB-36-G
.146
[3.70]
.275 [7.00]
.236 [6.00]
A
.335 [8.50]
.126 [3.20]
B
.100 [2.54]
.031 x .016
[0.80 x 0.40]
.100
[2.54]
.100 [2.54]
ø .040 [1.02]
A = .100 [2.54] X No. of Positions + .300 [7.62]
B = .100 [2.54] X No. of Spaces
Recommended PCB Layout
RSBR
.100 [2.54]
.146
[3.70]
B
RSBR-36-G
.275 [7.00]
A
.236 [6.00]
.335 [8.50]
.063
[1.60]
B
.100 [2.54]
.031 x .016
[0.80 x 0.40]
.126
[3.20]
.100 [2.54]
.100 [2.54]
ø.040 [1.02]
Recommended PCB Layout
A = .100 [2.54] x No. of Positions + .300 [7.62]
B = .100 [2.54] x No. of Spaces
312
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAm-TECh.COm
.100" RECEPTACLE STRIPS
.224" hEIGhT LOW PROFILE
Adam Technologies, Inc.
RS SERIES
RS1L
Ordering Information pg. 307
B
.094 [2.40]
RS1L
RS1L-10-G
A
.094
[2.40]
.224 [5.70]
.110 [2.80]
.100 [2.54]
.028 x .016 [0.70 x 0.40]
A = .100 [2.54] x No. of Positions
B = .100 [2.54] x No. of Spaces
.100 [2.54]
B
ø.040 [1.02]
Recommended PCB Layout
RS2L
B
.100 [2.54]
RS2L
RS2L-20-G
A
.197
[5.00]
.224 [5.70]
.110
[2.80]
.100 [2.54]
.028 x .016
[0.70 x 0.40]
.100
[2.54]
B
.100 [2.54]
ø.040 [1.02]
.100 [2.54]
A = .100 [2.54] x No. of Positions per row
B = .100 [2.54] x No. of Spaces
Recommended PCB Layout
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAm-TECh.COm
313
.100" RECEPTACLE STRIPS
.260" hEIGhT FOUR SIDED CONTACT
Adam Technologies, Inc.
RS SERIES
RS1B
Ordering Information pg. 307
B
.138 [3.50]
RS1B-10-SG
RS1B
A
.267 [6.80]
.125 [3.17]
.100 [2.54]
.026x.010 [0.65x0.25]
B
.100 [2.54]
A = .100 [2.54] X No. of Positions
B = .100 [2.54] X No. of Spaces
ø.040 [1.02]
Recommended PCB Layout
RS2B
B
.100 [2.54]
RS2B-20-SG
.230
[5.84]
A
RS2B
.267 [6.80]
.125 [3.17]
.100 [2.54]
.026x.010 [.65x.25]
.100 [2.54]
B
.100 [2.54]
ø.040 [1.02]
.100 [2.54]
A = .100 [2.54] X No. of Positions per row
B = .100 [2.54] X No. of Spaces
314
Recommended PCB Layout
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAm-TECh.COm
.100" RECEPTACLE STRIPS
BOTTOm, PASS ThRU & DUAL ENTRY
Adam Technologies, Inc.
RS SERIES
RS1BE-A/B
Ordering Information pg. 307
B
TYPE B
PIN 1
B
TYPE A
PIN 1
.100
[2.54]
A
RS1BE-B-10-SG-A
.197 [5.00]
.100 [2.54]
.200
[5.08]
A = .100 [2.54] X No. of Positions
B = .100 [2.54] X No. of Spaces
B
B
ø.040 [1.02]
.100 [2.54]
ø.040 [1.02]
.100 [2.54]
ø.047 [1.20]
ø.047 [1.20]
.200 [5.08]
.200 [5.08]
.100 [2.54
TYPE
A
TYPE
.100 [2.54
TYPE BB
TYPE
A
Recommended PCB Layouts
RS1BE
A
.100 [2.54]
A = .100 [2.54] X No. of Positions
B = .100 [2.54] X No. of Spaces
RS1BE-10-SG
.100
[2.54]
B
.100 [2.54]
.197
[5.00]
.118 [3.00]
ø.035 [0.89]
.031x.010
[0.81x0.25]
ø.040 [1.02]
.100
[2.54]
Recommended PCB Layout
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAm-TECh.COm
315
.100" RECEPTACLE STRIPS
TOP, BOTTOm & PASS ThRU ENTRY
Adam Technologies, Inc.
RS SERIES
RS2BE-A
Top EnTRy
Ordering Information pg. 307
B
.100 [2.54]
.200
[5.08]
A
RS2BE-A-28-G
B
ø.039 [1.00]
.197
[5.00]
.118 [3.00]
.100 [2.54]
A = .100 [2.54] X No. of Positions per row
B = .100 [2.54] X No. of Spaces
.031x.010
[0.80x0.25]
.100 [2.54]
.150 [3.81]
.150
[3.81]
SINGLE ROW CONFIGURATION
ALSO AVAILABLE
Recommended PCB Layout
RS2BE-B
Top oR BoTToM
EnTRy
B
.100 [2.54]
.200
[5.08]
A
RS2BE-B-26-G
.197
[5.00]
B
ø.039 [1.00]
.118 [3.00]
.100 [2.54]
A = .100 [2.54] X No. of Positions per row
B = .100 [2.54] X No. of Spaces
.200
[5.08]
.200 [5.08]
.031x.010
[0.80x0.25]
.100 [2.54]
ø.037 [.95]
SINGLE ROW CONFIGURATION
ALSO AVAILABLE
Recommended PCB Layout
RS2BE-C
Top oR BoTToM
EnTRy
B
.100 [2.54]
.200
[5.08]
A
RS2BE-C-30-G
.197
[5.00]
B
.100 [2.54]
.118 [3.00]
.100 [2.54]
A = .100 [2.54] X No. of Positions per row
B = .100 [2.54] X No. of Spaces
316
.031x.010
[0.80x0.25]
.100 [2.54]
.100 [2.54]
.300
[7.62]
ø.047 [1.20]
SINGLE ROW CONFIGURATION
ALSO AVAILABLE
ø.039 [1.00]
Recommended PCB Layout
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAm-TECh.COm
.100" RECEPTACLE STRIPS
ELEvATED SOCkETS .100" [2.54] CENTERLINE
Adam Technologies, Inc.
RS SERIES
B
.100 [2.54]
PIN 1
RSE1
A = .100" [2.54] x No. of positions
B = .100" [2.54] x No. of spaces
.094 [2.40]
A
.335
[8.50]
.098 [2.50]
C
.098 [2.50]
RSE1-3-20-SG-3
.098 [2.50]
B
D
.100 [2.54]
.024 X .016
[0.60 X 0.40]
Recommended PCB Layout
B
.100 [2.54]
PIN 1
ø .040
[1.02]
.100 [2.54]
RSE2
A = .100" [2.54] x No. of positions per row
B = .100" [2.54] x No. of spaces
.100 [2.54]
.197 [5.00]
A
.335
[8.50]
.098 [2.50]
RSE2-3-40-SG-3
C
.098 [2.50]
B
.100 [2.54]
.098 [2.50]
D
.100 [2.54]
.024 X .016
[0.60 X 0.40]
.100 [2.54]
Recommended PCB Layout
2 Insulators
1 Insulator
ORDERING INFORMATION
RSE1
2
20
SG
ø .040
[1.02]
.433
[11.00]
3 Insulators
.531
[13.50]
.630
[16.00]
1
* Replace with 1 (single row) or 2 (dual row)
SERIES INDICATOR
RSE1 = Single row,
vertical
elevated
socket strip
RSE2 = Dual row,
vertical
elevated
socket strip
POSITIONS
Single Row
01 thru 40
Dual Row
02 thru 80
HEIGHT
1 = .433 [11.00]
2 = .531 [13.50]
3 = .630 [16.00]
PIN LENGTH
Dim. D
See chart Dim.D
PLATING
SG = Selective Gold
Plating in contact area,
Tin Plated tails
T = Tin Plated
PART NUMBER
INSULATORS
DIM. C
DIM. D
RSEX-1-XX-SG-1
1
.433 [11.00]
.118 [3.00]
RSEX-1-XX-SG-2
1
.433 [11.00]
.315 [8.00]
RSEX-1-XX-SG-3
1
.433 [11.00]
.448 [11.40]
RSEX-2-XX-SG-1
2
.531 [13.50]
.216 [5.50]
RSEX-3-XX-SG-1
3
.635 [16.12]
.118 [3.00]
RSEX-3-XX-SG-2
3
.635 [16.12]
.252 [6.40]
*Replace “X” with “1” for single row or “2” for double row.
*Replace “XX” with total number of positions.
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAm-TECh.COm
317