HIGH ISOLATION VOLTAGE 6 PIN OPTOCOUPLER PS2601 PS2601L PS2602 PS2602L FEATURES DESCRIPTION • HIGH ISOLATION VOLTAGE BV: 5 k Vr.m.s. MIN • HIGH SPEED SWITCHING tr = 3 µs, tf = 5 µs TYP PS2601, PS2602 ,PS2601L and PS2602L are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor. PS2601 and PS2602 are in a plastic DIP (Dual In-line Package). PS2601L and PS2602L are lead bending type (Gull-wing) for surface mount. PS2601 and PS2601L have a base pin, PS2602 and PS2602L have no base pin. • HIGH CURRENT TRANSFER RATIO CTR: 300% TYP APPLICATIONS • HIGH COLLECTOR TO EMITTER VOLTAGE VCEO : 80 V MIN • TAPE AND REEL AVAILABLE Interface circuit for various instrumentations and control equipment. • AC LINE / DIGITAL LOGIC • DIGITAL LOGIC / DIGITAL LOGIC • TWISTED PAIR LINE RECEIVER • TELEPHONE / TELEGRAPH LINE RECEIVER • HIGH FREQUENCY POWER SUPPLY FEEDBACK CONTROL ELECTRICAL CHARACTERISTICS (TA = 25°C) PART NUMBER Transistor Diode SYMBOLS UNITS VF Forward Voltage, IF = 10 mA V IR Reverse Current, VR = 5 V µA C Junction Capacitance, V= 0, f = 1.0 MHz pF Collector to Emitter Dark Current, VCE = 80 V, IF = 0 nA ICEO MIN TYP MAX 1.1 1.4 5 30 100 BVCEO Collector to Emitter Breakdown Voltage, IC = 1 mA, IB = 0 V BVECO Emitter to Collector Breakdown Voltage, IE = 100 µA, IB = 0 V 7 Current Transfer Ratio1, IF = 5 mA, VCE = 5 V % 80 Collector Saturation Voltage, IF = 10 mA, IC = 2 mA V R1-2 Isolation Resistance, VIN-OUT = 1.0 kV Ω C1-2 Isolation Capacitance, V = 0, f = 1.0 MHZ pF 0.6 Rise Time 2, VCC = 5 V, IC = 2 mA µs 3 µs 5 CTR VCE(sat) Coupled PS2601, PS2601L, PS2602, PS2602L PARAMETERS tr tf Fall Time 2, VCC = 5 V, IC = 2 mA Notes: 1. KD : 300 to 600 % LD : 200 to 400 % MD : 80 to 240 % 80 300 600 0.3 11 10 2. Test Circuit for Switching Time 6 5 4 VCC PULSE INPUT 6 5 = 100 µs ( PW Duty Cycle = 1/10 ) 2 6 1 2 3 PS2601 1 5 2 4 IF 4 Vout 50 Ω 2 = 100 µs ( PW Duty Cycle = 1/10 ) 5 1 IF 1 VCC PULSE INPUT 4 RL = 100 Ω Vout 50 Ω RL = 100 Ω 3 PS2602 PS2601 PS2602 California Eastern Laboratories PS2601, PS2601L, PS2602, PS2602L ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS Diode VR IF PD IF (PEAK) Transistor VCEO VECO IC PC Coupled BV TSTG TOP PARAMETERS UNITS RATINGS Reverse Voltage Forward Current (DC) Power Dissipation Peak Forward Current (PW = 100 µs, Duty Cycle 1%) V mA mW A 6 80 150 1 Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation V V mA mW 80 7 50 150 Vr.m.s. °C °C 5000 -55 to +150 -55 to +100 Isolation Voltage2 Storage Temperature Operating Temperature Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. AC voltage for 1 minute at TA = 25° C, RH = 60% between input (Pin No. 1, 2, 3 common) and output (Pin No. 4, 5, 6 common). TYPICAL PERFORMANCE CURVES (TA = 25°) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 200 Transistor Power Dissipation, PD (mW) Diode Power Dissipation, PD (mW) 200 150 100 50 0 25 50 75 100 100 50 0 25 50 75 100 Ambient Temperature, TA (°C) Ambient Temperature , TA (°C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 100 70 TA = 100 ˚C 75 ˚C 50 ˚C 60 Collector Current, IC (mA) Forward Current, IF (mA) 150 25 ˚C 0 ˚C -25 ˚C -55 ˚C 10 1 0.1 50 40 50 mA 20 mA 30 10 mA 20 IF = 5 mA 10 0.01 0.6 0.8 1.0 1.2 1.4 Forward Voltage, VF (V) 1.6 0 2 4 6 8 Collector to Emitter Voltage, VCE (V) 10 PS2601, PS2601L, PS2602, PS2602L TYPICAL PERFORMANCE CURVES (TA = 25°) COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 100 10000 20 mA 10 mA 5 mA 1000 Collector Current, IC (nA) Collector to Emitter Dark Current, ICEO (nA) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE 80 V 40 V 24 V 10 V VCE = 5 V 100 10 1 0.1 -60 -40 -20 0 20 40 60 80 10 2 mA IF = 1 mA 1 0.1 0.01 0 100 50 mA 0.2 0.4 0.6 0.8 1 Ambient Temperature, TA (°C) Collector Saturation Voltage, VCE(sat) (V) NORMALIZED OUTPUT CURRENT vs. AMBIENT TEMPERATURE CURRENT TRANSFER RATIO (CTR) vs. FORWARD CURRENT 1.2 0.8 0.6 0.4 Normalized to 100 at TA = 25 ˚C IF = 5 mA, VCE = 5 V 0.2 0 -55 100 50 Switching Time, t (µs) Current Transfer Ratio, CTR, (%) 1.0 -25 0 25 50 75 400 150 300 100 200 50 100 0 0.03 100 0 0.5 0.5 0.1 1 5 10 Ambient Temperature,TA (°C) Forward Current, IF (mA) SWITCHING TIME vs. LOAD RESISTANCE SWITCHING TIME vs. LOAD RESISTANCE 50 1000 VCC = 10 V IC = 2 mA TA = 25 ˚C Sample CTR = 290 % 500 td tf Switching Time, t (µs) ∆CTR, Normalized Output Current VCE = 5 V 200 tr 10 5 ts 1 IF = 5 mA, VCC = 5 V TA = 25 ˚C Sample CTR = 290 % tf ts 100 50 10 tr 5 td 0.5 100 500 1k Load Resistance, RL ( Ω ) 5k 10 k 0.1 0.5 1.0 5 10 Load Resistance, RL ( Ω ) 50 PS2601, PS2601L, PS2602, PS2602L TYPICAL PERFORMANCE CURVES (TA = 25°) FREQUENCY RESPONSE CTR DEGRADATION IF = 5 mA VCE = 5 V TA = 25 ˚C 1.0 ∆CTR, Normalized Voltage Gain, AV (dB) 0 -5 -10 100 Ω -15 IF = 5 mA 0.8 IF = 20 mA 0.6 IF = 40 mA 0.4 RL = 1kΩ -20 0.2 CTR Test condition IF = 5 mA, VCE = 5V 300 Ω 0.5 1 2 5 10 20 50 100 200 500 0 102 103 Frequency, f (kHz) 104 105 Time, Hr OUTLINE DIMENSIONS (Units in mm) PS2601, PS2602 PS2601L, PS2602L 10.16 MAX 10.16 MAX 6 6 4 4 φ1 1 3 7.62 6.5 1 3 3.8 MAX 0.05 to 0.2 7.62 0.65 2.8 MIN 4.55 MAX 3.8 MAX φ1 1.34 2.54 MAX 2.54 0.50 ± 0.10 0 to 15˚ 0.25 M 2.54 MAX 2.54 6.5 0.9± 0.25 9.60 ± 0.4 1.34 ± 0.10 0.25 M PIN CONNECTIONS (Top View) PS2602, PS2602L PS2601, PS2601L 6 1 5 2 6 4 3 1. 2. 3. 4. 5. 6. 5 4 1. 2. 3. 4. 5. 6. Anode Cathode NC Emitter Collector Base EXCLUSIVE NORTH AMERICAN AGENT FOR 1 2 Anode Cathode NC Emitter Collector NC 3 RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM PRINTED IN USA ON RECYCLED PAPER -3/98 DATA SUBJECT TO CHANGE WITHOUT NOTICE