Fuse Holders and Blocks

Fuse Holders and Blocks
Section Contents
Page
HHT Series in-line fuse holders for
5 X 15 to 20mm fuses . . . . . . . . . . . . . . . . . . . . . . . . .278
Tron® in-line fuse holders . . . . . . . . . . . . . . . . . . . . . 279-280
Panel mounted fuse holders for 5 X 20mm fuses . . . . . . .281
Panel mounted fuse holders for 1⁄4” X 1 1⁄4” fuses . . . . . . . . 282
Panel mounted fuse holders for 5 X 20mm and
1
⁄4” X 1 1⁄4” fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283-284
Panel mounted fuse holders for indicating type fuses . . 285
Panel mounted fuse holders for
13
⁄32” X 1 5⁄16” to 1 1⁄2” fuses . . . . . . . . . . . . . . . . . . . . . . . . .286
Panel mounted fuse holders for
13
⁄32” X 1 1⁄2” fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .287
Fuse blocks for 1⁄4” X 1 1⁄4” fuses . . . . . . . . . . . . . . . . . . . . 288
Fuse blocks for 1⁄4” X 1” fuses . . . . . . . . . . . . . . . . . . . . . . 289
Fuse blocks for 13⁄32” X 1 1⁄2” fuses . . . . . . . . . . . . . . . . . . . .290
Rail mount fuse holders . . . . . . . . . . . . . . . . . . . . . . . . . . 291
RED indicates NEW information
249
Fuse
Holders
& Blocks
OPM-1038 3-pole fuse holders with
disconnect switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
OPM-1038 3-pole fuse holders . . . . . . . . . . . . . . . . . . . .251
OPMNGA- 3-pole Class CC and 13⁄32” X 1 1⁄2”
fuse overcurrent protection modules . . . . . . . . . . .252-253
CH Series Class J modular fuse holders . . . . . . . . . . . . 254
JT(N)60030 & JT(N)600600 Safety J™ Class J
fuse holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . .255-256
CH Series Global Modular fuse holders . . . . . . . . . 257-258
SAMI™ fuse covers . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
H250 & R250 Series 250V Class H (K) and
R fuse blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . .260-262
H600 & R600 600V Class H (K) and
R fuse blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . .263-265
J600 Series Class J fuse blocks . . . . . . . . . . . . . . 266-267
JP Series Class J fuse blocks . . . . . . . . . . . . . . . . . . . . 268
JA60030 add-a-pole Class J fuse blocks . . . . . . . . . . . . 268
T300 300V Class T fuse blocks . . . . . . . . . . . . . . . 269-270
T600 600V Class T fuse blocks . . . . . . . . . . . . . . . 271-272
BCA Series Class CC add-a-pole modular
fuse blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
BMA Series 13⁄32” X 1 1⁄2” fuse add-a-pole modular
fuse blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
BC Series Class CC fuse blocks . . . . . . . . . . . . . . . . . .274
BM Series Type M 13⁄32” X 1 1⁄2”” fuse blocks . . . . . . . . . . .274
BG & G Series Class G fuse blocks . . . . . . . . . . . . . . . 274
BH Series high speed fuse modular fuse blocks . . . . . 275
Class H & J modular fuse blocks . . . . . . . . . . . . . . . . . .275
Plug fuse box cover units . . . . . . . . . . . . . . . . . . . . . . .276
HFB & HEB-10 in-line fuse holders
for 1⁄4” X 1 1⁄4” fuses . . . . . . . . . . . . . . . . . . . . . . . 277, 279
HHB & HRK universal in-line fuse holders for
1
⁄4” dia. fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
HR & HM Series in-line fuse holders for 1⁄4” dia. fuses . . 278
HFA Series waterproof in-line fuse holders
for 1⁄4” X 1 1⁄4” fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . .278
Fuse Holders and Blocks
Optima® Fuse Holder Module and Disconnect Switch
Features/Benefits
• Padlockable with finger-safe terminals for safety. Qualified
as IP20 per IEC 60529.
• Cam-action handle for easy module removal, offered with
Class CC rejection clips or European 10 x 38mm clips to
meet global needs
• Wire ready with 35mm DIN rail or screw panel mounting
(#8 screw, 11⁄4” long) saves installation time
• Fuse indication lights with option for remote fuse status
available. See Data Sheet for additional wiring details.
OPM-1038 With Disconnect Switch
Typical Applications
• Industrial Control
• Process Control Systems
• Automated Warehouse Systems
Communication
• Individual Control Circuits
Catalog Number Build-A-Code
Series
O P M -
Fuse Type
1 0 3 8
S W
Blank = 10 x
38mm or 13⁄32” x 1-1⁄2”
R = Class CC
Dimensions
C=
Communication
Feature
5.72∑ (± .045)
(145.3mm) (± 1.14)
4.25∑ (± 0.03)
(108.0mm) (± 0.76)
0.43∑ (± 0.03)
(10.9mm) (± 0.76)
1.38∑
(35.0mm)
3-Phase
Volts
HP
240
5
480
10
600
15
6T3
•
•
•
•
Midg et (Non-Rejection)
KTK
FNM
FNQ
Communication
Port
3L2
1.76∑
0.27∑ (6.9mm) (44.7mm)
5L3
0.74∑ (18.8mm)
0.31∑ (7.9mm)
0.57∑ (± 0.03)
(14.5mm) (± 0.76)
3.74∑ (± 0.03)
(95.0mm) (± 0.76)
Communication
Port
3.17∑
(80.5mm)
0.23∑
(5.8mm)
0.50∑ (12.7mm)
0.44∑ (11.2mm)
0.224∑
(5.6mm)
Recommended Fuse Types
Class CC
LP-CC
KTK-R
FNQ-R
1L1
4T 2
BUSS
Specifications
Description: 3-pole load break modular fuse holder and
disconnect switch for 13⁄32 x 11⁄2” (10 x 38mm) fuses.
Dimensions: See Dimensions illustration.
Poles: 3
Agency Information: CE, UL (see table), CSA Certified,
C22.2 No. 39, Class 6225-01, File 47235, IEC (see table).
Flammability Rating: UL 94V0.
Horsepower Rating of Switch
2T1
European
C10M
C10G
1.86∑
(47.2mm)
Panel Mounting
Hole Pattern
3.60∑
(91.4mm)
1.312∑
(± 0.01)
(33.3mm)
(± 0.25)
Panel Mounting
Hole Pattern
Physical Characteristics
Small size matches 45mm IEC starter width
Accepts #8-18 AWG stranded, #10-18 AWG solid wire
3-pole
Handle and shaft required for through the door operation
Catalog Numbers
Catalog
Numbers
OPM-1038SW
Electrical Rating
30A, 600Vac UL/CSA
OPM-1038RSW
32A, 660Vac IEC
30A, 600Vac UL/CSA
OPM-1038SWC
30A, 600Vac UL/CSA
OPM-1038RSWC
32A, 660Vac IEC
30A, 600Vac UL/CSA
SCCR**
Rating
*
100kA
*
100kA
Clips
Non-rejection,
10x38mm or
13
⁄32” x 1 1⁄2”
Rejection,
Class CC
Non-rejection,
10x38mm or
13
⁄32” x 1 1⁄2”
Rejection,
Class CC
Remote Open
Fuse Indication
No
No
Yes
Yes
UL Information
Std.
Recognized
UL 508
Listed
UL 508
Recognized
UL 508
Listed
UL 508
File
Guide
IEC
CE
E161278
NLRV2
IEC 60947-3
Yes
E161278
NLRV
E161278
NLRV2
E161278
NLRV
*Rating varies depending on fuse used in module; 100kA maximum
**Short-Circuit Current Rating
Data Sheet: 1103
250
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Yes
IEC 60947-3
No
No
Fuse Holders and Blocks
Optima® Fuse Holder Module
Features/Benefits
• Padlockable with finger-safe terminals for safety. Qualified
as IP20 per IEC 529.
• Cam-action handle for easy module removal.
• Offered with Class CC rejection clips or European 10 x
38mm clips to meet global needs
• Wire ready with 35mm DIN rail or screw panel mounting
(#8 screw, 1 1⁄4” long) saves installation time
• Fuse indication lights with option for remote fuse status
indication. See Data Sheet for additional wiring details.
OPM-1038
Catalog Number Build-A-Code
Series
Fuse Type
O P M -
1
0
3
8
Blank = 10 x
38mm or
13
⁄32” x 1 1⁄2”
R = Class CC
Typical Applications
• Industrial Control
Communication • Process Control Systems
• Automated Warehouse Systems
• Individual Control Circuits
Dimensions
C=
Communication
Feature
3.22∑ (± 0.03)
(81.8mm) (± 0.76)
2T1
IL1
Midg et (Non-Rejection)
KTK
FNM
FNQ
European
C10M
C10G
Communication
Port
3L2
0.27∑ (6.9mm)
5L3
0.74∑ (18.8mm)
0.31∑ (7.9mm)
3.60∑ (± 0.03)
(91.4mm) (± 0.76)
0.57∑
(14.5mm)
Fuse
Holders
& Blocks
Class CC
LP-CC
KTK-R
FNQ-R
4T2
1.76 ∑ (± 0.03)
(44.7mm) (± 0.7 )
6T3
BUSS
Specifications
Description: 3-pole modular fuse holder for 13⁄32” x 1 1⁄2”
(10 x 38mm) fuses.
Dimensions: See Dimensions illustration.
Poles: 3
Agency Information: CE, UL (see table), CSA Certified,
C22.2 No. 4248, Class 6225-01, File 47235, IEC (see table).
Flammability Rating: UL 94V0.
Recommended Fuse Types
3.74∑ (± 0.03)
(95.0mm)
(± 0.76)
3.17∑
(80.5mm)
Communication
Port
1.65∑ (± 0.03)
(41.9mm) (± 0.76)
0.23∑
(5.8mm)
0.50∑ (12.7mm)
0.44∑ (11.2mm)
Physical Characteristics
• Small size matches 45mm IEC starter width
• Accepts #8-18 AWG stranded, #10-18 AWG solid wire
• 3-pole
0.224"
(5.6mm)
1.312∑
(± 0.01)
(33.3mm)
(± 0.25)
Panel Mount
Hole Pattern
3.60∑ (± 0.03)
(91.4mm) (± 0.76)
1.86∑ (± 0.03)
(47.2mm)
(± 0.76)
Panel Mount
Hole Pattern
Catalog Numbers
Catalog
Numbers
OPM-1038
OPM-1038R
OPM-1038C
OPM-1038RC
Electrical Rating
30A, 600Vac/dc UL/CSA
(Max 3 Watts per fuse)
32A, 660V IEC
30A, 600Vac/dc UL/CSA
30A, 600Vac/dc UL/CSA
(Max 3 Watts per fuse)
32A, 660V IEC
30A, 600Vac/dc UL/CSA
SCCR**
Rating
*
200kA
*
200kA
Clips
Non-rejection,
10 x 38mm or
13
⁄32” x 1 1⁄2”
Rejection,
Class CC
Non-rejection,
10 x 38mm or
13
⁄32” x 1 1⁄2”
Rejection,
Class CC
Remote Open
Fuse Indication
No
UL Information
Std.
Recognized
UL 4248
No
Listed
UL 4248
Recognized
UL 4248
Yes
Yes
Listed
UL 4248
File
E14853
Guide
IZLT2
E14853
IZLT
E14853
IZLT2
E14853
IZLT
IEC
IEC 60269-2-1
CE
Yes
Yes
IEC 60269-2-1
No
No
*Rating varies depending on fuse used in module; 200kA maximum.
**Short-Circuit Current Rating
Data Sheet: 1102
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
251
Fuse Holders and Blocks
Optima® Three-pole Overcurrent Protection Module
Fuse Holder Wire Range:
— 75°Cu Only
— #18-12 Single/Dual, torque 15lb-in
— #10-8 Single/Dual, torque 20lb-in
— Dual wire with same gauge and type
OPM-NG-
75º
Cu Only [mm2]
AWu
(N•m)/lb-in
AWG
[mm2]
(N•m)/lb-in
#18-8
x
1
1-6
x
1
18-12
Single/Dual
#18-8 x 1
1-6 x 1
18-12 Single/Dual
#18-8#18-8
x 2 x 21-6 1-6
x 2 x 2Strld
15lb-in (1.7#18-8
N•m) x 1
#18-8 x 1
1-6 x 1
10-8
Single/Dual
#18-8#18-8
x 2 x 21-6 1-6
x 2 x 2 10-8
Single/Dual
1-4 1-4
x 1 x 1 20lb-in
(2.5
N•m)
20in-lb
(2.5
N•m)
1-4 1-4
x 2x 2
Solid
Solid
1-6
x1
Stranded
Ferrules
Ferrules
Specifications
Description:
OPM-NG-SC3: 3-pole Class CC fuse holder for use with
Class CC fuses (Cooper Bussmann Types
LP-CC, FNQ-R, KTK-R).
OPM-NG-SM3: 3-pole fuse holder for use with 13⁄32” x 11⁄2” and
10.3 x 38mm fuses (Cooper Bussmann
Types: 13⁄32” x 11⁄2”; KTK, FNQ, KLM, 10 x
38mm; FWA, FWC, C10G_ _, C10M_ _).
Ratings:
Volts: — OPM-NG-SC3: 600Vac (or less)
— OPM-NG-SM3: 600Vac (or less) UL and CSA 30A
— OPM-NG-SM3: 690Vac (or less) IEC 32A
Amps: — OPM-NG-SC3: 0-30A
— OPM-NG-SM3: 0-30A
SCCR:— OPM-NG-SC3: 200kA
— OPM-NG-SM3: Same as fuse IR, 200kA maximum
Agency Information: CE, UL; OPM-NG-SC3 UL Listed, UL
4248, File E14853, Guide IZLT. OPM-NG-SM3, UL
Recognized, UL 4248, File E14853, Guide IZLT2. CSA
Certified, C22.2 No. 4248, Class 6225-01, File 47235. IEC
60947-3 Utilization Category AC20B.
Handling & Storage Temperature: -10° to 65°C.
Features/Benefits
• 45mm width matches IEC starters
• 35mm DIN rail or panel mounting feature. Maximum screw
size #8 (M4)
• Pressure plate terminations with dual-wire rated terminals
(see Wire Table) and optional auxiliary contacts
• Integrated collapsible handle and fuse carrier cannot be
removed from holder base
• Padlockable and IP20 finger-safe to IEC60529
Typical Applications
• Mass Produced Control Systems
• Process Control Systems
• Automated Warehouse Systems
• Individual Control Circuits
Input Power Terminal Wire Range:
Wiring
Tightening
Torque:
Solid
Conductor
Stranded
Conductor
Connector
Screw Clamp
(1) #14 to #2 (1.5
(2) #14 to #6 (1.5
(1) #14 to #2 (1.5
(2) #12 to #6 (2.5
20lb-in (2.2 N•m)
15lb-in (1.7 N•m)
25mm2)
10mm2)
25mm2)
10mm2)
or conductor
conductors
conductor or
conductors
Materials:
— Housing: Thermoplastic - ULV2
— Clip: Tin-plated copper alloy
— Contact lubricant: Fluoroether grease
— Saddle screw: Plated steel
— DIN rail springs: Stainless steel
Optional Accessories:
Comb Bar (Max current rating = 63A)
OPMNGSA245
OPMNGSA254
OPMNGSA272
OPMNGSA345
OPMNGSA354
OPMNGSA445
OPMNGSA454
OPMNGSA472
OPMNGSA554
2
2
2
3
3
4
4
4
5
circuit,
circuit,
circuit,
circuit,
circuit,
circuit,
circuit,
circuit,
circuit,
45mm
54mm
72mm
45mm
54mm
45mm
54mm
72mm
54mm
between
between
between
between
between
between
between
between
between
same
same
same
same
same
same
same
same
same
phases
phases
phases
phases
phases
phases
phases
phases
phases
Input Terminal Block (Max current rating = 63A)
OPMNGSA005 Input/Feed Through Power Terminal, Supports feed through to
another system, DIN rail mount only
OPMNGSA009 Input Power Terminal
Cover
OPMNGSA010 Protective Cover for unused terminals on comb bar
Auxiliary Contacts
OPMNGSAAUX11
OPMNGSAAUX20
NO/NC
NO/NO
Marking Tabs
OPMNGSA101 Marking Tab - Mounts to front of carrier, quantity 100
Data Sheet: 1109
252
to
to
to
to
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Fuse Holders and Blocks
Optima® Three-pole Overcurrent Protection Module
Optional Accessories
Dimensions Millimeters (± 0.38), Inches (± .015)
Fuse
Holders
& Blocks
Data Sheet: 1109
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
253
Fuse Holders and Blocks
Class J Modular Fuse Holders
CH _ _ J _
Specifications
Description: IP20 finger-safe, 1- to 3-pole Class J fuse
holder with DIN rail or panel mounting.
Ratings:
Volts: — 600Vac/dc (or less)
Amps: — 30A (30A version)
— 60A (60A version)
Withstand Rating SCCR: — 200kA
Wire Range: Cu solid and stranded conductors with single
(1-18AWG) and dual (3-18AWG) wire ratings. See Catalog
Numbers table for details.
Torque Rating:10-18AWG 24 lb-in.
1-8AWG 35 lb-in.
Poles: 1-, 2- or 3-Pole.
Storage & Operating Temperature Range*:
-20°C to 75°C.
Agency Information: CE, UL 4248/CSA 22.2 No. 4248.
Flammability Rating: UL 94V0.
30 Amp Version
60 Amp Version
Catalog Numbers
See Catalog Numbers table below.
Dimensions (mm):
Features and Benefits
• Choice of local fuse indication; easyID™ viewing window (for
seeing indicator on LPJ-SPI indicating fuse) or neon lamp.
• Versatile 1-, 2- and 3-pole versions for 0-30A and 35-60A
fuses with dual wire rated connections simplify wiring.
• Improved electrical safety with IP20 finger-safe construction
with lock-out/tag-out feature. 3-phase fuse extraction
assures all phases are opened for service work.
• Flexible panel/35mm DIN rail mounting mounting options
Fuse Siz e
0-30A
35-60A
Poles
W
D
H
1
2
3
1
2
3
32
64
96
40
80
120
70
70
70
83
83
83
115
115
115
125
125
125
*For fuse selection on applications above or below 25ºC, consult derating charts in Cooper
Bussmann publication “Selecting Protective Devices” (SPD).
Catalog Numbers
Catalog
Amp
Volts
# of
Numbers
Rating (AC/DC) Poles
IP20
Finger-Safe
Mounting
Padlockable
Local
Indication
AWG Single
Wire Range
CH30J1
CH30J1I
CH30J2
CH30J2I
CH30J3
CH30J3I
30
30
30
30
30
30
600
600
600
600
600
600
1
1
2
2
3
3
Yes
Yes
Yes
Yes
Yes
Yes
35mm
35mm
35mm
35mm
35mm
35mm
DIN/
DIN/
DIN/
DIN/
DIN/
DIN/
Panel
Panel
Panel
Panel
Panel
Panel
Yes
Yes
Yes
Yes
Yes
Yes
easyID**
Neon Lamp***
easyID**
Neon Lamp***
easyID**
Neon Lamp**
1-18
1-18
1-18
1-18
1-18
1-18
CH60J1
CH60J1I
CH60J2
CH60J2I
CH60J3
CH60J3I
60
60
60
60
60
60
600
600
600
600
600
600
1
1
2
2
3
3
Yes
Yes
Yes
Yes
Yes
Yes
35mm
35mm
35mm
35mm
35mm
35mm
DIN/
DIN/
DIN/
DIN/
DIN/
DIN/
Panel
Panel
Panel
Panel
Panel
Panel
Yes
Yes
Yes
Yes
Yes
Yes
easyID**
Neon Lamp***
easyID**
Neon Lamp***
easyID**
Neon Lamp***
1-18
1-18
1-18
1-18
1-18
1-18
** easyID™ viewing window, requires use of Cooper Bussmann LPJ_SPI permanent indication fuses.
*** Indication non-fuse dependent, minimum voltage 90Vac/115Vdc.
Data Sheet: 2144
254
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Fuse Holders and Blocks
Class J (Finger-safe) Fuse Holders
Safety J™ — JT(N)60030 & JT(N)60060
30 Amp Version
60 Amp Version
Fuse
Holders
& Blocks
Specifications
Description: Indicating and non-indicating finger-safe, DIN
rail mount fuse holders for use with Class J fuses - (Cooper
Bussmann® LPJ, JKS).
Dimensions: See Dimensions illustrations.
Ratings:
Volts: — 600Vac
Amps: — 0-60A (JT(N)60060)
— 0-30A (JT(N)60030)
SCCR:— 200,000A RMS Sym.
— 300,000A self certified using Cooper Bussmann
LPJ_SP fuses
Agency Information: CE, Listed to UL 4248: Guide IZLT,
File 14853, CSA Certified: Class 6225-01, File 47235. IP20
per IEC 60529.
Flammability Rating: UL 94V0.
Indication: Min voltage: 90Vac, 115Vdc; neon lamp “ON”
when fuse opens, voltage source and current path are
present.
Terminations: 30A dual port torque 20lb-in, 60A single port
torque 45lb-in, terminal construction, tin-plated copper alloy.
Wire Size: JT(N)60030 - rated for 75°C, AWG#18-#8; Cu
only, JT(N)60060 - rated for 75°C, AWG#14-#4; Cu only.
(Note: For JT(N)60030 use both stranded or solid, in a variety of dual wire combinations of
same wire size and type.)
Features and Benefits
• Short-Circuit Current Rating of 300,000A with Cooper
Bussmann LPJ___SP fuses.
• Rapid, flexible 35 mm DIN rail mounting.
• One piece interlocking design for assembling multiple pole
blocks reduces inventory costs.
• Removable fuse carrier allows fuse replacement away from
base while maintaining finger-safe rating.
Typical Applications
• Industrial Controls
• Process Controls
• Small HP VFDs
Catalog Numbers
Catalog Numbers
JT60030
JT60060
JTN60030
JTN60060
Amps
30
60
30
60
Indication
Non-indicating
Non-indicating
Indicating (Neon)
Indicating (Neon)
Data Sheet: 1152
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
255
Fuse Holders and Blocks
Class J (Finger-safe) Fuse Holders
Dimensions for JT60030 & JTN60030 — in (mm)
1.14
(29.0)
1.05
(26.7)
Slot
Din-rail
.07
(1.8)
MOUNTING
2.75
(69.9)
Shown without fuse
pullout cover
1 pole
BUSS
BUSS
BUSS
JT60030
0 – 30A
600VAC
JT60030
0 – 30A
600VAC
JT60030
0 – 30A
600VAC
USE CLASS J
FUSES
USE CLASS J
FUSES
USE CLASS J
FUSES
DO NOT REMOVE
UNDER LOAD
DO NOT REMOVE
UNDER LOAD
DO NOT REMOVE
UNDER LOAD
1.23
(31.2)
2.42
(61.3)
2 pole
3.60
(91.4)
3 pole
2.52
(64.1)
Dimensions for JT60060 & JTN60060 — in (mm)
1.31
(33.3)
1.25
(31.8)
Slot
Din-rail
.10
(2.6)
3.10
(78.7)
1 pole
BUSS
BUSS
BUSS
JT60060
35 – 60A
600VAC
JT60060
35 – 60A
600VAC
JT60060
35 – 60A
600VAC
USE CLASS J
FUSES
USE CLASS J
FUSES
USE CLASS J
FUSES
DO NOT REMOVE
UNDER LOAD
DO NOT REMOVE
UNDER LOAD
DO NOT REMOVE
UNDER LOAD
1.52
(38.1)
2 pole
3 pole
MOUNTING
2.96
(75.2)
4.40
(111.7)
Shown without fuse
pullout cover
3.06
(77.7)
JT(N)600 Series fuse blocks can be dovetailed together within the same current rating to provide multiple pole block
configurations.
NOTE: JT(N)60030 cannot be dovetailed to JT(N)60060.
Data Sheet: 1152
256
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Fuse Holders and Blocks
Global Modular Fuse Holders
CH Series - 8x32, 10x38, 14x51, 22x58, Class CC
Specifications
Description: The ‘CH’ line of modular fuse holders accommodates many
fuses from around the world, including North American Class-CC, Midget,
Class gR, aR HSF, and IEC Industrial Ferrule (Class gG and aM) in four
physical sizes: 8x32, 10x38, 14x51 and 22x58mm.
Agency Information: Manufactured in accordance with IEC 60269 and IEC
60947-3. Agency Compliance as indicated in the Catalog Numbers table.
Features/Benefits
• Optional open fuse indication (minimum 90Vac, 115Vdc for indicator lights)
• 14x51 & 22x58mm configurations available with optional micro-switches for
remote open fuse indication, pre-breaking, and fuse presence
• Multi-phase connections available for ganging poles
• Low voltage indicating device available for CC and midget (48V)
Modular Fuse Holder Selection Table (10 x 38 and CC)
Part Numbers
Series
Size
CHCC
Class CC
UL
600Vac/dc
30A
UL
CHCC1DI-48***
48Vdc, 30A
––
CHM
10X38 &
Midget
CHPV1
CHPV1I**
CHM1D
CHM1DNX
CHM1DN
CHM2D
CHM3D
CHM3DN
CHM4D
CHM1DI**
CHM1DNI**
CHM2DI**
CHM3DI**
CHM3DNI**
CHM4DI**
UL
600Vac/dc,
30A
IEC 690Vac,
32A
(3 Watt)
__
CHM1DI-48***
UL
48Vdc, 30A
IEC 48Vdc,
32A (3 Watt)
1000Vdc 30A
UL
††
††
††
IEC
††
†††
†
†
†
†
Phase Configuration
1-pole
2-pole
3-pole
No. of
17.5mm
Modules*
1
2
3
Box
Qty.
12
6
4
1-pole
1
12
Terminal
Rating
SCCR
Rating
75º Cu
Wire Only
200kA
•
•
•
•
•
•
•
•
1-pole
1
12
75º Cu
Wire Only
33kA
1-pole
1 Neutral Pole
1-pole + Neutral
2-pole
3-pole
3-pole + Neutral
4-pole
1
1
2
2
3
4
4
12
12
6
6
4
3
3
75º Cu
Wire Only
Rating varies
depending on fuse
used in holder.
•
1-pole
1
12
Cooper Bussmann
Fuses
LP-CC, FNQ-R,
KTK-R
PV Series
Fuse
Holders
& Blocks
CHPV
Max
Voltage
& Current
Catalog Numbers
W/O Indication
W/Indication
CHCC1D
CHCC1DI**
CHCC2D
CHCC2DI**
CHCC3D
CHCC3DI**
FNQ, KLM, FNM,
KTK, BAF, FWA,
DCM, C10 Series,
AGU, FWC
† UL Recognized (cURus)
†† UL LIsted (cULus)
††† Self Certified
*Holder width as compared to standard 17.5mm module, i.e., 1 = 17.5mm 2 = 35mm.
**90V miminum required for illumination
***12V mininum required for illumination
MFH Wire Range and Torque CH Series: CHCC, CHM & CHPV
Wire Range
18-12 AWG
(0.8 - 4mm2)
10 AWG
(5.0mm2)
10-8 AWG
(5.0 - 8.0mm2)
18-14 AWG
(0.8 - 2.0mm2)
18-10 AWG
(0.8 - 5.0mm2)
Conductor Type
75ºC Cu Wire
Only
Conductors
Torque
Solid/Stranded
Single
20 lb-in
2.3 N•m
Solid
Single
Stranded
25 lb-in
(2.8 N•m)
Solid
Dual
Stranded
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
257
Fuse Holders and Blocks
Global Modular Fuse Holders
Modular Fuseholder Selection Table (8x32, 14x51, and 22x58)
Part Numbers
Series/
Size
CH08
8X32
CH14
14X51
CH22
22X58
Max
Catalog Numbers
Voltage
W/O Indication
W/Indication & Current
CH081D
CH081DI
CH081DNX
400Vac
CH081DNS
CH081DNSI
25A
CH081DN
CH081DNI
IEC
CH082D
CH082DI
400Vac
CH083D
CH083DI
25A
CH083DNS
CH083DNSI
CH083DN
CH083DNI
CH084D
CH084DI
UL/CSA
CH141DICH1
40A
CH141D
CH141DMS
-14X51
(5 Watt)
UL/cURus
CH141DNX
IEC
600Vac/dc,
CH141DN
CH141DNI
690Vac,
CH142D
CH142DI
50A40A
(5 Watt)
CH143D
CH143DI
IEC
CH143DMS
690Vac,
CH143DN
CH143DNI
UL
50A
CH143DNMS
600Vac/dc,
CH144D
CH144DI
100A
CH221B
NotCH22
(9.5 Watt)
Not
CH221BMS
Available22X58IEC
UL/cURus
Available
CH221BNX
with
690Vac,
600Vac/dc,
with
CH221BN
local
125A
100A
local
CH222B
neon
(9.5 Watt)
neon
CH223B
indicatio
IEC
indication
CH223BMS
(remote
690Vac,
(remote
CH223BN
microswitch
125A
microswitch
CH223BNMS
only)
only)
CH224B
IEC
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
UL
†
†
†
†
†
†
†
Phase Configuration
1-pole
1 Neutral Pole
1-pole + Neutral
1-pole + Neutral
2-pole
3-pole
3-pole + Neutral
3-pole + Neutral
4-pole
1-pole
1-pole + Microswitch
1 Neutral Pole
1-pole + Neutral
2-pole
3-pole
3-pole + Microswitch
3-pole + Neutral
3-pole + Neutral + Microswitch
4-pole
1-pole
1-pole + Microswitch
1 Neutral Pole
1-pole + Neutral
2-pole
3-pole
3-pole + Microswitch
3-pole + Neutral
3-pole + Neutral + Microswitch
4-pole
† UL Recognized (cURus)
†† UL LIsted (cULus)
*Holder width as compared to standard, i.e., 1 = 17.5mm module 2 = 35mm.
**90V miminum required for illumination
No. of
17.5mm
Modules*
1
1
1
2
2
3
3
4
4
1.5
1.5
1.5
3
3
4.5
4.5
6
6
6
2
2
2
4
4
6
6
8
8
8
Box
Qty.
12
12
12
6
6
4
4
3
3
6
6
6
3
3
2
2
1
1
1
6
6
6
3
3
2
2
1
1
1
Wire Range
Maximum
Torque
1-16mm2 (18-6 AWG)
2.5 N•m (22in-lb)
1-10mm2 (18-8 AWG)
1-16mm2 (18-8 AWG)
2.0 N•m (17.5in-lb)
2.5 N•m (22in-lb)
1-16mm2 (18-6 AWG)
2.5 N•m (22in-lb)
2.5-16mm2 (14-6 AWG)
3.0 N•m (26in-lb)
2.5-50mm2 (14-1 AWG)
4.0 N•m (35in-lb)
Accessories for CH Series
Catalog
Numbers
AL-D
JV-L
CH810-HP
CH14-HP
C08NL
C14NL
C22NL
CH14MS-1D
CH14MS-3D
CH-PLC****
CH22LS
CH22IP20
For Use with
Fuse Holders
CH08 and
Multi-Phase Connection Links
CH14 Series
CHM and
Multi-Phase Connection Kit***
CHCC Series
CH08 Series
Multi-Phase Handle Pins
CH14 Series
CH08 Series
CH14 Series
Neutral Links
CH22 Series
CH141 Series
Operated-Fuse Micro-Switches
CH143 Series
CHM and
PLC Module
CHCC Series
22x58 Lock Support
CH22 Series
22x58 IP20 Protection
CH22 Series
Accessory
Accessor y
No. of
Poles
–
12
–
–
–
–
–
–
–
1
3
10
1
1
Multi-Phase
Connection Links
258
Neutral Links
Multi-Phase
Handle Pins
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
10
5
2
–
5
–
12
***Kit contains 3-Spring pins and 6-connection links
****OL Listed (cULus)
Operated-Fuse
Micro-Switches
Car ton
Qty.
Programmable
Logic Controller
(PLC)
Fuse Holders and Blocks
SAMI™ Fuse Covers
SAMI-1I
SAMI™ Series
SAMI-2I
SAMI-3I
SAMI-6I
SAMI-7I
SAMI-8I
Features and Benefits
• Insulated cover allows field conversion of fuses mounted in
open fuse blocks to dead front configuration.
• Optional open fuse indicating light aids in system
troubleshooting.
• Units are re-usable.
• Allows visual marking of line and load side of fuses.
Fuse
Holders
& Blocks
Typical Applications
• Class H, R and J fuse blocks up to 100A
• Class T fuse blocks up to 60A
• Class CC, G and Midget, 30A fuse blocks
Dimensions
TEST PROBE
LINE
TEST PROBE
Buss
SAMI -2
LOAD
Specifications
Description: Indicating and non-indicating fuse covers for
Class J, RK1, RK5, H, K5, CC, G (0-30A) and midget-type
fuses. Indicating feature requires a minimum of 90Vac or
115Vdc to illuminate lamp. One cover required for each pole.
WARNING: To avoid electrical shock, turn power off before
installing, removing or servicing.
Dimensions: See Dimensions illustration.
Ratings:
Volts: — Non-Indicating
- 0-600Vac/dc
— Indicating
- 90 to 600Vac
-115 to 600Vdc
Amps: — 0-100A
Agency Information: CE, UL Listed; SAMI-1I through
SAMI-6I, SAMI-8I and SAMI-9I, SAMI-1N through SAMI-6N,
SAMI-8N and SAMI-9N, UL Recognized; SAMI-7I and
SAMI-7N, CSA Certified, File LR47235-93C.
SAMI-4I
B
Catalog Numbers
Catalog
Numbers*
SAMI-1_
SAMI-2_
SAMI-3_
SAMI-4_
SAMI-5_
SAMI-6_
SAMI-7_
SAMI-8†_
SAMI-9_
Dimensions (inches)
Description
A
600V, J (0-30A) and 600V, T (35-60A)** 5.02
250V, RK, K5, H (35-60A)
600V, RK, K5, H (0-30A)
7.03
600V, J (65-100A)
7.03
250V, RK, K5, H (65-100A)
8.20
600V, RK, K5, H (35-60A)
8.20
600V, J (35-60A)
4.98
600V, Midget, Class CC, G (0-30A)
3.82
600V, RK††, K5, H (65-100A)
10.38
250V, RK, K5, H (0-30A) and 600V,
3.82
T (0-30A)
A
B
1.03
C
1.94
1.30
1.30
1.30
1.30
1.17
0.75
1.50
0.75
2.07
2.33
2.18
2.18
2.14
1.72
2.33
1.72
C
FUSE
*For indicating cover, add suffix “I”, for non-indicating cover, add suffix “N”.
Example: SAMI-7I = Indicating, SAMI-7N = Non-indicating.
**Available in non-indicating only.
†SAMI-8A adapter available for small Fusetron® body design. SAMI-8I and SAMI-8N come
standard with adapter (SAMI-8A).
††Not for use with KTS-R fuses.
Data Sheet: 1204 (Trimming Guides: 12041, 12042, 12043, 12044, 12045, 12046, 12048, 12049)
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
259
Fuse Holders and Blocks
Class H(K) and R Fuse Blocks – 250V
H250 & R250 Series
Specifications
Agency Information: CE, UL Listed UL 4248, Guide IZLT,
File E14853; CSA Certified, Class 6225-01, File 47235.
Flammability Rating: UL 94V0.
Descriptions:
H250 Series: 1-, 2- and 3-pole fuse
blocks for use with Class
H fuses.
R250 Series: 1-, 2- and 3-pole fuse
blocks for use with Class
R fuses (Cooper
Bussmann LPN-RK and FRN-R, DLN-R and
KTN-R fuses).
Dimensions: See Dimensions illustrations.
Ratings:
Volts: — 250Vac/dc (H250 & R250 Series)
Amps: — 1⁄10-600A
SCCR: — H250 Series; 10kA RMS Sym.
— R250 Series; 200kA RMS Sym.
Features and Benefits
• H250 fuse blocks provide one, two and three pole housing
for Class H, K and R fuses at 250Vac.
• H250 fuse blocks are listed with a Short-Circuit Current
Rating of 10kA RMS Sym.
• R250 fuse blocks provide one, two and three pole housing
for Class R fuses at 250Vac.
• R250 fuse blocks are listed with a Short-Circuit Current
Rating of 200kA RMS Sym.
Typical Applications
• 250Vac/dc or less Control Systems
• 250Vac/dc or less Industrial Control
• 250Vac/dc or less Industrial Control Circuits
Recommended DIN rail adapters for the 1⁄10-30A series
• see page 413.
Class H Fuseblocks (250V) Catalog Data (for NON and REN Fuses)
Terminal Type (Suffix No.)
Screw
Amps
⁄10
to
30
1
Box Lug w/
Pressure Plate
& Clip with
Reinforced Spring
Poles
Catalog
Number
—
Clip with
Reinforced
Spring
1
2
3
H25030-1
H25030-2
H25030-3
S
S
S
SR
SR
SR
P
P
P
PR
PR
PR
C
C
C
CR
CR
CR
—
—
—
Q
—
—
1
2
3
—
—
—
—
—
—
—
—
—
SR
SR
SR
—
—
—
—
—
—
—
—
—
—
—
—
C
C
C
—
—
—
CR
CR
CR
CR
CR
CR
CO
CO
CO
—
—
—
—
—
—
—
—
—
4
5
6
7
8
9
—
—
—
—
—
CR
—
—
10
—
—
—
—
—
CR
—
—
11
—
—
—
—
—
CR*
—
—
12
—
—
—
—
—
CR†
—
—
13
—
—
—
—
—
CR
—
—
14
—
—
—
—
—
CR†
—
—
15
31
1
H25060-1
to
2
H25060-2
60
3
H25060-3
61
1
H25100-1
to
2
H25100-2
100
3
H25100-3
101
H25200-1
1
to
3
H25200-3
200
201
1
H25400-1
to
3
H25400-3
400
401
1
H25600-1
to
3
H25600-3
600
*UL Recognized, No CSA Certification.
†No UL, No CSA Certification.
Pressure
Plate
—
Clip with
Reinforced
Spring
Copper
Only
0.25˝
Quick
Connect
Figure
Number
C, CR #2-14 Cu, #2-12 Al
P, PR #10-18 Cu Only
Q N/A
S, SR #10-18 Cu Only
C, CR #2-14 Cu, #2-8 Al
CO #2-14 Cu Only
CR #1/0-8 Cu/Al
SR #8W/ Ring Terminal
CR 250kcmil-6 Cu/Al
CR 500kcmil-4 Cu/Al
CR (2) 500kcmil-4/0 Cu/Al
Data Sheet: H250 Series, 1112; R250 Series, 1110
260
Wire
Range
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Fuse Holders and Blocks
Class H(K) and R Fuse Blocks – 250V
Amps
1
⁄10
to
30
Poles
Class R Fuseblocks (250V) Catalog Data (for LPN-RK, FRN-R, DLN-R and KTN-R Fuses)
1
2
3
Terminal Type (Suffix No.)
Screw w/
Box Lug w/
0.25”
Pres.
Clip
Quick—
Plate
— Cu Only Connect
SR
PR
CR
COR
QR*
SR
PR
CR
COR
—
SR
PR
CR
COR
—
Catalog
Number
R25030-1
R25030-2
R25030-3
31
1
R25060-1 —
to
2
R25060-2 —
60
3
R25060-3 —
61
1
R25100-1 —
to
2
R25100-2 —
100
3
R25100-3 —
101
1
R25200-1 —
to
3
R25200-3 —
200
201
1
R25400-1 —
to
3
R25400-3 —
400
401
1
R25600-1 —
to
3
R25600-3 —
600
*UL Recognized, No CSA Certification.
†No UL, No CSA Certification.
‡UL Recognized, CSA Certification
Fig.
No.
1
2
3
Wire
Range
COR #6-14 Cu Only
CR #2-14 Cu, #2-12 Al
PR #10-18 Cu Only
QR N/A
SR #10-18 Cu Only
—
—
—
—
—
—
CR
CR
CR
CR
CR
CR
—
—
—
—
—
—
—
—
—
—
—
—
4
5
6
7
8
9
—
—
CR
CR
—
—
—
—
10
11
CR 250kcmil-6 Cu/Al
—
—
CR‡
CR†
—
—
—
—
12
13
CR 500kcmil-4/0 Cu/Al
—
—
CR
CR†
—
—
—
—
14
15
CR 500kcmil-4/0 Cu/Al
CR #2-14 Cu, #2-8 Al
CR 1/0-8 Cu/Al
Dimensions – in
250V 1⁄10 to 30A
2.05"
1.25"
0.95"
1.09"
0.17"
0.75" 0.41"
0.25"
3"
2.5"
2 SPACES AT
0.95" - 1.91"
Fuse
Holders
& Blocks
1.41"
0.22"
1.27"
3.03"
0.5"
1.52"
0.55"
0.22" DIAMETER
FIGURE 1.
0.55"
FIGURE 2.
FIGURE 3.
250V, 31A to 60A
1.73
0.27
1.5
2.81
1.31
0.5
0.5
0.5
1.31
4.125
1.31
0.5
0.5
0.22 x 0.41
0.22 x 0.41
0.22 x 0.41
4.25
G
1.25
1.5
FIGURE 4.
FIGURE 5.
FIGURE 6.
Data Sheet: H250 Series, 1112; R250 Series, 1110
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
261
Fuse Holders and Blocks
Class H(K) and R Fuse Blocks – 250V
250V, 61A to 100A
1.81"
2.06"
0.25"
0.62"
0.59"
3.38"
1.56"
4.94"
1.56"
1.56"
0.59"
0.62"
0.62"
0.28" DIA. x
0.5" C'BORE
7.36"
2.38"
3.125"
2.125"
FIGURE 7.
250V, 101A to 200A
FIGURE 8.
FIGURE 9.
250V, 101A to 200A
8"
5"
3.15
0.75
0.31 0.5
3.4"
3.0
2.0
6"
3"
0.5"
1"
2"
7.13"
0.34" DIA.
HOLE
THROUGH
0.34
DIAMETER
7.125
0.75"
C'BORE
4.5"
EYELETS
TO ACCEPT
0.25" DIA.
SCREW
3.0
3"
2.06"
2.06
9"
FIGURE 10.
FIGURE 11.
250V, 201A to 400A
4.0
1.0
0.31 0.63
250V, 201A to 400A
10.88
9.25
4.0
0.82
1.0
3.0
1.75
0.34
DIAMETER
9.06
4.0
9.06
0.75"
C'BORE
0.34" DIA.
HOLE
THROUGH
3.0
2.5
3.02
FIGURE 13.
FIGURE 12.
250V, 401A to 600A
4.97
1.0
0.31 1.125
250V, 401A to 600A
14.74
11.0
4.97
1.0
4.0
1.75
0.34
DIAMETER
11.0
5.0
11.0
0.75"
C'BORE
1.87
0.34" DIA.
HOLE
THROUGH
3.0
3.0
4.0
FIGURE 15.
FIGURE 14.
Data Sheet: H250 Series, 1112; R250 Series, 1110
262
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Fuse Holders and Blocks
Class H(K) and R Fuse Blocks – 600V
H600 & R600 Series
Specifications
Descriptions:
H600 Series: fuse blocks for use with 1-, 2- and 3-pole
Class H fuses.
R600 Series: fuse blocks for use with 1-, 2- and 3-pole
Class R fuses (Cooper Bussmann LPS-RK, FRS-R, DLS-R
and KTS-R fuses).
Dimensions: See Dimensions illustrations.
Ratings:
Volts: — 600Vac/dc (H600 & R600 Series)
Amps: — 1⁄10-600A
SCCR: — H600 Series; 10kA RMS Sym.
— R600 Series; 200kA RMS Sym.
Agency Information: CE, UL Listed UL 4248, Guide IZLT,
File E14853; CSA Certified, Class 6225-01, File 47235.
Flammability Rating: UL 94V0.
H60030-3C
H60030-2PR
Features and Benefits
• H600 fuse blocks provide one-, two- and three-pole housing
for Class H, K and R fuses at 600Vac.
• H600 fuse blocks are listed with a Short-Circuit Current
Rating of 10kA RMS Sym.
• R600 fuse blocks provide one, two and three pole housing
for Class R fuses at 600Vac.
• R600 fuse blocks are listed with a Short-Circuit Current
Rating of 200kA RMS Sym.
Typical Applications
• 600Vac/dc or less Control Systems
• 600Vac/dc or less Industrial Control
• 600Vac/dc or less Individual Control Circuits
Fuse
Holders
& Blocks
Class H Fuseblocks (600V) Catalog Data (for NOS and RES Fuses)
Terminal Type (Suffix No.)
Screw
Amps
Poles
Catalog
Number
⁄10
1
H60030-1
to
2
H60030-2
30
3
H60030-3
31
1
H60060-1
to
2
H60060-2
60
3
H60060-3
61
1
H60100-1
to
2
H60100-2
100
3
H60100-3
101
H60200-1
1
to
3
H60200-3
200
201
1
H60400-1
to
3
H60400-3
400
401
1
H60600-1
to
3
H60600-3
600
†No UL, No CSA Certification.
‡UL Recognized, CSA Certification
1
—
Clip with
Reinforced
Spring
Pressure
Plate
S
S
S
—
—
—
—
—
—
SR
SR
SR
—
—
—
—
—
—
P
P
P
—
—
—
—
—
—
—
—
—
—
—
Box Lug w/
Pressure Plate
& Clip with
Reinforced Spring
—
Clip with
Reinforced
Spring
Figure
Number
PR
PR
PR
—
—
—
—
—
—
C
C
C
C
C
C
—
—
—
CR
CR
CR
CR
CR
CR
CR
CR
CR
1
2
3
4
5
6
7
8
9
—
—
—
CR
10
—
—
—
CR
11
—
—
—
—
CR‡
12
—
—
—
—
—
CR†
13
—
—
—
—
—
CR
14
—
—
—
—
—
CR†
15
Wire
Range
C, CR #2-14 Cu, #2-12 Al
P, PR, S, SR #10-18 Cu Only
C, CR #2-14 Cu, #2-8 Al
CR #1/0-8 Cu/Al
CR 250kcmil-6 Cu/Al
CR 500kcmil-4 Cu/Al
CR (2) 500kcmil-4/0 Cu/Al
Data Sheet: H600 Series, 1113; R600 Series, 1111
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
263
Fuse Holders and Blocks
Class H(K) and R Fuse Blocks – 600V
Class R Fuseblocks (600V) Catalog Data (for LPS-RK, FRS-R, DLS-R and KTS-R Fuses)
Amps
Poles
Terminal Type (Suffix No.)
Screw w/
Box Lug w/
Pres.
Clip
—
Plate
— Cu Only
SR
PR
CR
—
SR
PR
CR
COR
SR
PR
CR
COR
—
—
CR
—
—
—
CR
—
—
—
CR
—
⁄10
to
30
31
to
60
1
2
3
1
2
3
Catalog
Number
R60030-1
R60030-2
R60030-3
R60060-1
R60060-2
R60060-3
61
to
100
101
to
200
1
2
3
R60100-1
R60100-2
R60100-3
—
—
—
—
—
—
CR
CR
CR
—
—
—
7
8
9
CR, 1/0-8 Cu/Al
1
3
R60200-1
R60200-3
—
—
—
—
CR
CR
—
10
11
CR
250kcmil-6 Cu/Al
—
—
CR‡
CR†
—
—
12
13
—
—
CR
CR†
—
—
14
15
1
201
1
R60400-1 —
to
3
R60400-3 —
400
401
1
R60600-1 —
to
3
R60600-3 —
600
†No UL, No CSA Certification.
‡UL Recognized, CSA Certification
Fig.
No.
1
2
3
4
5
6
Wire
Range
COR #6-14 Cu Only
CR #2-14 Cu, #2-12 Al
PR, SR #10-18 Cu Only
CR #2-14 Cu, #2-8 Al
CR 500kcmil-4 Cu/Al
CR (2) 500kcmil-4/0 Cu/Al
Dimensionals – in
600V, 1⁄10 to 30A
1.73
0.26
1.54
2.90
1.56
0.25
0.62
0.25
1.56
4.25
1.56
0.62
0.62
0.28 x 0.5
0.28 x 0.5
0.28 x 0.5
6.25
3.13
1.56
FIGURE 1.
FIGURE 2.
600V, 31 to 60A
2.06"
0.25"
1.81"
0.59"
3.38"
1.56"
0.62"
0.62"
FIGURE 3.
0.59"
4.94"
1.56"
1.56"
0.62"
0.28" DIA. x
0.5" C'BORE
7.36"
2.38"
3.125"
2.125"
FIGURE 4.
FIGURE 5.
FIGURE 6.
Data Sheet: H600 Series, 1113; R600 Series, 1111
264
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Fuse Holders and Blocks
Class H(K) and R Fuse Blocks – 600V
600V, 61 to 100A
2.22
2.38
0.34
0.88
0.67
4.03
1.81
0.88
5.84
1.81
1.81
0.67
0.88
0.28 x 0.5
0.28 x 0.5
0.28 x 0.5
9.5
4.25
2.63
FIGURE 7.
FIGURE 8.
FIGURE 9.
600V, 101 to 200A
3.15
0.75
0.31
9.0"
8.0"
6.5"
3.0
2.0
0.5
0.34
DIAMETER
3.15"
0.75"
0.34
DIAMETER
0.75"
C'BORE
3.0
9.63
9.58"
0.75" DIA.
C'BORE
0.50" Deep
5.5"
3.0"
3.31
2.04"
Fuse
Holders
& Blocks
FIGURE 11.
FIGURE 10.
600V, 201 to 400A
4.02
1.0
0.56
0.63
11.63"
9.25"
3.0
1.75
0.34
DIAMETER
12.0
0.75"
C'BORE
4.02"
1.00"
1.19"
3.0
0.34
DIAMETER
0.75" DIA.
C'BORE
0.67" Deep
12.00"
7.00"
4.5
2.5"
FIGURE 12.
FIGURE 13.
600V, 401 to 600A
4.987
1.0
0.56 1.125
4.0
1.75
2.13"
0.34
DIAMETER
14.0
0.75"
C'BORE
15.26"
11.0"
4.987"
1.00"
0.34
DIAMETER
0.75" DIA.
C'BORE
0.67" Deep
14.00"
8.00"
3.0
5.5
3.00"
FIGURE 15.
FIGURE 14.
Data Sheet: H600 Series, 1113; R600 Series, 1111
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
265
Fuse Holders and Blocks
Class J Fuse Blocks
J600 Series
Specifications
Description: 1-, 2- or 3-pole fuse blocks for use with Class
J fuses (Cooper Bussmann® LPJ, DFJ and JKS).
Dimensions: See Dimensions illustrations.
Construction: Thermoplastic.
Poles: 1 to 3
Ratings:
Volts: — 600Vac/dc
Amps: — 1⁄2-600A
SCCR: — 200kA RMS Sym.
Agency Information: CE, UL Listed, UL 4248, Guide IZLT,
File E14853, CSA Certified, C22.2 No. 4248, Class 6225-01,
File 47235.
Flammability Rating: UL 94V0.
Mounting: Accepts DIN rail adapter DRA-1.
Catalog Numbers
Screw†
J60030-1S*
J60030-2S*
J60030-3S*
—
—
—
—
—
—
—
—
—
—
—
Pressure
Plate†
J60030-1P
J60030-2P
J60030-3P
—
—
—
—
—
—
—
—
—
—
—
Box
Lug
J60030-1C
J60030-2C
J60030-3C
J60060-1C
J60060-2C
J60060-3C
—
—
—
—
—
—
—
—
Catalog Numbers
Box Lug w/
Retaining Clip
Amps
J60030-1CR††
1
1
⁄2-30
J60030-2CR††
⁄2-30
J60030-3CR††
J60060-1CR††
J60060-2CR††
J60060-3CR††
J60100-1CR
J60100-3CR††
J60200-1CR
J60200-3CR
J60400-1CR**
J60400-3CR**
J60600-1CR
J60600-3CR*
31-60
31-60
61-100
61-100
101-200
101-200
201-400
201-400
401-600
401-600
Features and Benefits
• J600 fuse blocks provide one-, two- and three-pole housing
for Class J fuses at 600Vac.
• J600 fuse blocks are listed with a Short-Circuit Current
Rating of 200kA RMS Sym.
Typical Applications
• 600Vac/dc or less Control Systems
• 600Vac/dc or less Industrial Control
• 600Vac/dc or less Individual Control Circuits
Fig.
No.
1
2
3
1
2
3
4
5
6
7
8
9
10
11
Poles
1
2
3
1
2
3
1
3
1
3
1
3
1
3
Wire
Rang e
C, CR #2-14 Cu, #2-8 Al
COR #2-14 Cu Only
P, PR, S, SR #10-14 Cu Only
C, CR, #2-14 Cu/Al
COR #4-14 Cu Only
COR 1/0-8 Cu Only
CR, CRQ 1/0-8 Cu/Al
CR 250kcmil-6 Cu/Al
CR 500kcmil -4 Cu/Al
CR (2) 500kcmil-4/0 Cu/Al
†Clip reinforcing springs are standard on fuse blocks rated 100A and above. Available on 30A and 60A blocks by adding the letter “R” to the end of the part
number.
††Copper only connections available by changing “CR” suffix to “COR”.
*No UL, No CSA Certification
**UL Recognized, CSA Certification
Dimensions - in (±0.015)
⁄2 - 60A
61-100A
1
2.415"
1.702
3.202
.750
2.250
4.702
2.250
.750
C
L
5"
2.28"
.30"
4.005
.94"
1.583"
.22"
Dia.
.5"
C'Bore
6.28"
CL
3.14"
1.500
FIGURE 1.
FIGURE 2.
FIGURE 3.
1.75"
FIGURE 4.
Data Sheet: 1114
266
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
1.5"
FIGURE 5.
Fuse Holders and Blocks
Class J Fuse Blocks
101-200A
3.15"
3.1"
.75"
3"
2"
.31"
3.06"
8.31"
7.00"
.5"
.75"
C'Bore
6.125"
.344" Dia. hole thru
.750 Dia. c'bore
6.125"
1.69"
.34"
DIA.
.750"
FIGURE 7.
FIGURE 6.
201-400A
4"
1"
3"
1.75"
.56"
10.51"
4.00"
9.00"
6.00"
.625"
3.5"
7.5"
7.50"
.50"
.344" Dia. hole thru
.750 Dia. c'bore
2.00"
.5"
FIGURE 8.
Fuse
Holders
& Blocks
.75"
C'Bore
.34"
DIA.
1.00"
FIGURE 9.
401-600A
4.99"
4.987"
4"
1.75"
1"
14.144"
11.00"
1.125"
.56"
3.25"
2.375"
.344" Dia.
hole thru
.750 Dia.
c'bore
8.875"
.50"
8.875"
2.88"
.75"
C'Bore
.34" Dia.
1.00"
FIGURE 10.
FIGURE 11.
Data Sheet: 1114
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
267
Fuse Holders and Blocks
Class J Fuse Blocks
JP Series
Dimensions - in (mm) ± 0.015” (± 0.40mm)
Specifications
Description: Pyramid style 3-pole fuse block for use with
Class J fuses (Cooper Bussmann® LPJ, DFJ, JKS).
Dimensions: See Dimensions illustrations.
Ratings:
Volts: — 600Vac/dc
Amps: — 0-30A
SCCR: — 200kA RMS Sym.
Agency Information: CE, UL Listed, UL 4248, Guide IZLT,
File E14853, CSA Certified, C22.2 No. 39, Class 4225-04,
File 47235.
Flammability Rating: UL 94V0.
Mounting: Panel or 35mm DIN rail mount.
DIN-RAIL MOUNTING SCREW 8" (203.2mm) APART
END STOPS - PREVENT BLOCK MOVEMENT WHEN CHANGING FUSES
4.00" MAX.
(101.6mm)
3.75" (±0.02)
(95.3mm (±0.50)
1.88"
(47.6mm)
1.19"
(30.2mm)
2.38"
(60.4mm)
3.29"
(83.6mm)
To order DIN rail: Part# NDNA 100 (1 meter) or NDNA 200 (2 meter).
Catalog Numbers
With
DIN
Rail
Adapter*
Mounting
Screws
with
Pressure
Plate
Aluminum
X
X
Catalog
Numbers
Panel
JP60030-3PR
X
JP60030-3CR
X
JP60030-3COR
X
JP60030-3PRA
X
X
JP60030-3CRA
X
JP60030-CORA
X
*Adapter only for DIN rail - Cat No. JPA-3.
Box
Copper
Only
X
X
X
Wire Rang e
#10-14 Cu Only
#2-14 Cu/Al
#2-14 Cu Only
#10-14 Cu Only
#2-14 Cu/Al
#2-14 Cu Only
2.78"
3.06"
(70.6mm)
(77.8mm)
ADAPTOR FOR 35mm
SYMMETRICAL DIN-RAIL MOUNTING
3.13"
(79.5mm)
Data Sheet:1108
JA60030 Add-a-pole
Specifications
Description: Adder fuse block to achieve number of poles desired,
for use with Class J fuses (Cooper Bussmann LPJ, DFJ & JKS).
Dimensions: See Dimensions illustrations.
Ratings:
Volts: — 600Vac/dc
Amps: — 0-30A
SCCR: — 200kA RMS Sym.
Agency Information: UL Listed, UL 4248, Guide IZLT, File E14853,
CSA Certified, C22.2 No. 4248, Class 6225-01, File 47235.
Flammability Rating: UL 94V0.
Mounting: Panel or 35mm DIN rail mount.
Features: Panel and DIN rail mount, adder block, retaining clip
Amps
Poles
Screw
Screw
w/Retaining
Clip
⁄2 - 30
ADDER
1
2
3
JA60030-AS
JA60030-1S
JA60030-2S
JA60030-3S
JA60030-ASR
JA60030-1SR
JA60030-2SR
JA60030-3SR
1
268
Pressure
Plate
JA60030-AP
JA60030-1P
JA60030-2P
JA60030-3P
Pressure
Plate
w/Retaining
Clip
JA60030-APR
JA60030-1PR
JA60030-2PR
JA60030-3PR
Dimensions - in (mm)
Box Lug
Box Lug
w/Retaining
Clip
Wire Range
(Cu Only)
JA60030-AC
JA60030-1C
JA60030-2C
JA60030-3C
JA60030-ACR
JA60030-1CR
JA60030-2CR
JA60030-3CR
S, SR, P, PR 10 - 18 AWG
C, CR, 10 - 14 AWG
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Fuse Holders and Blocks
Class T Fuse Blocks – 300V
T300
Specifications
Description: T300 (300V) fuse blocks for use with Class T
fuses (Cooper Bussmann® JJN).
Dimensions: See Dimensions illustrations.
Poles: 1 to 4
Ratings:
Volts: — 300Vac/dc
Amps: — 1⁄2 - 600A
SCCR:— 200kA RMS Sym.
Agency Information: CE, UL Listed UL 4248, Guide IZLT,
File E14853, CSA Certified, Class 6225-01, File 47235.
Flammability Rating: UL 94V0.
T30100-1CR
T30030-2CR
Features and Benefits
• Provide 1-, 2- and 3-pole housing for 300Vac Class T fuses.
• Short-Circuit Current Rating of 200kA RMS Sym.
• Class T fuse blocks have a small foot print, providing
substantial space savings in equipment
T30600-1C
Class T Fuse blocks (300V) Catalog Numbers
Typical Applications
• 300Vac/dc or less Control Systems
• 300Vac/dc or less Individual Control Circuits
Catalog Numbers
Catalog Numbers
Screw
T30030-2SR
T30030-3SR
T30030-4SR
T30060-2SR
T30060-3SR
T30060-4SR
—
—
—
—
—
—
—
Box Lug
T30030-2CR
T30030-3CR
T30030-4CR
T30060-2CR
T30060-3CR
T30060-4CR
T30100-1CR
T30100-2CR
T30100-3CR
T30200-1C
T30200-3C
T30400-1C
T30600-1C
Dimensions - in
1.63"
0.72"
0.16"
Amps
1/2-30
1
⁄2-30
31-60
31-60
61-100
61-100
101-200
101-200
201-400
401-600
Poles
2
3
4
2
3
4
1
2
3
1
3
1
1
Fig.
No.
1
1
Wire Rang e
1
CR #2-14 Cu/Al
SR #10-18 Cu Only
2
2
1/0-8 Cu/Al
3
4
5
6
250kcmil-6 Cu/Al
600kcmil-2/0 Cu/Al
(2) 600kcmil-4/0 Cu/Al
Figure 1. 1⁄2-60A
0.69"
T30030-S
SECTION X-X
C
1.03
1.03
2.06
2.06
3.09
3.09
SR #10-18 Cu
CR #6-14 Cu/Al
1.63"
0.72"
0.16"
A
B
1.20"
0.91"
Dimensions (in)
A
B
2.41
—
2.41
—
3.44
1.03
3.44
1.03
4.47
2.06
4.47
2.06
Fuse
Holders
& Blocks
Catalog
Numbers
T30030-2
T30060-2
T30030-3
T30060-3
T30030-4
T30060-4
X
Z
0.91"
2.75" 2.5"
X
Z
0.44" Full
0.20" Radius
C
T30060-C
SECTION Z-Z
Data Sheet: 1115
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
269
Fuse Holders and Blocks
Class T Fuse Blocks – 300V
Figure 2. 61 to 100A
Figure 3. 101 to 200A
1.69" (1 POLE)
3.09" (2 POLE)
4.5" (3 POLE)
2.06"
0.84"
6"
1.41" (2 POLE)
2.81" (3 POLE)
X
0.05"
3"
1.125"
0.28" DIAMETER
0.63" C'BORE 0.5" DEEP
1.69"
0.22" DIA.
0.52" C'BORE
0.55" DEEP
2.25"
REF.
4.78"
2.25"
1.25"
Z
3.06"
2.56"
2.39"
1.94"
0.81"
Z
X
0.38"
0.75"
Figure 5. 201 to 400A
Figure 4. 200A
4.87"
6"
1.695"
3"
.996"
2.25"
1.25"
1.125"
0.63"
A
0.28" DIAMETER
0.63" C'BORE 0.5" DEEP
2.75"
A
1.84"
0.282" DIAMETER THRU HOLE
0.625" C'BORE 0.438" DEEP
3.06"
2.38"
0.81"
2.375"
0.625"
4.46"
Figure 6. 401 to 600A
2.03"
5.75"
2.88"
1.5"
3.44"
2" 3"
3"
0.75"
0.33" DIAMETER
0.75" C'BORE 0.5" DEEP
Data Sheet: 1115
270
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Fuse Holders and Blocks
Class T Fuse Blocks – 600V
T600
Specifications
Description: T600 (600V) fuse blocks for use with Class T
fuses (Cooper Bussmann® JJS).
Dimensions: See Dimensions illustrations.
Poles: 1 to 3
Ratings:
Volts: — 600Vac/dc
Amps: — 1⁄2 - 600A
SCCR:— 200kA RMS Sym.
Agency Information: CE, UL Listed UL 4248, Guide IZLT,
File E14853, CSA Certified, Class 6225-01, File 47235.
Flammability Rating: UL 94V0.
Features and Benefits
• Provide 1-, 2- and 3-pole housing for 600Vac Class T fuses.
• Short-Circuit Current Rating of 200kA RMS Sym.
• Class T fuse blocks have a small foot print, providing
substantial space savings in equipment
Typical Applications
• 600Vac/dc or less Control Systems
• 600Vac/dc or less Individual Control Circuits
T60600-1C
T30030-2CR
Catalog Numbers
Screw
T60030-1SR
T60030-2SR
T60030-3SR
T60060-1SR
T60060-2SR
T60060-3SR
—
—
—
—
—
—
—
Box Lug
T60030-1CR
T60030-2CR
T60030-3CR
T60060-1CR
T60060-2CR
T60060-3CR
T60100-1C
T60100-2C
T60100-3C
T60200-1C
1B0089*
T60400-1C
T60600-1C
Catalog Numbers
Fig.
Amps
Poles No.
1 1
1
1
⁄2-30
1/2-30
2
3
1 2
2
31-60
2
31-60
3
1 3
3
61-100
2
61-100
3
101-200
1 44
101-200
3
201-400
1
5
401-600
1
6
Wire Rang e
SR #10-18 Cu
CR #2-14 Cu/Al
CR #2-14 Cu/Al
SR #10-18 Cu Only
2/0-14 Cu/Al
250kcmil-6 Cu/Al
600kcmil-2/0 Cu/Al
(2) 600kcmil-4/0 Cu/Al
* UL Listed, Guide IZLT, File E14853, CSA Certified Class 6225-01, File 21455M18
Fuse
Holders
& Blocks
Dimensions - in
Figure 1. 1⁄2 to 30A
1.44"
0.55"
0.5"
1.44"
0.33" 0.55"
2.59"
1.16"
0.33"
0.55"
3.75"
2.31"
0.33"
0.22" DIAMETER
0.5" C'BORE
0.33"
3.19"
1.563"
1.42"
Figure 2. 31 to 60A
1.75"
0.59"
0.5"
1.81"
0.63" 0.59"
3.34"
1.53"
0.63"
0.59"
4.86"
3.06"
0.63"
0.22" DIAMETER
0.5" C'BORE
2.94"
1.63"
1.47"
Data Sheet: 1116
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
271
Fuse Holders and Blocks
Class T Fuse Blocks – 600V
Figure 3. 61 to 100A
1.69" (1 POLE)
3.09" (2 POLE)
4.5" (3 POLE)
1.41" (2 POLE)
2.81" (3 POLE)
0.84"
X
0.78"
Z
0.22" DIA.
0.52" C'BORE
0.55" DEEP
2.34"
REF.
2.39"
X
0.38"
Z
SECTION Z-Z
0.75"
Figure 4. 101 to 200A
Figure 5. 201 to 400A
6"
6"
0.05"
3"
3"
1.125"
1.25"
2.25"
2.25"
1.25"
1.125"
2.5"
0.28" DIAMETER
0.63" C'BORE 0.5" DEEP
0.63"
0.28" DIAMETER
0.63" C'BORE 0.5" DEEP
2.72"
3.06"
2.56"
1.94"
0.81"
3.06"
2.38"
0.81"
Figure 6. 401 to 600A
2.95"
6.75"
3.38"
1.5"
3.44"
2" 3"
3"
0.75"
0.33" DIAMETER
0.75" C'BORE 0.5" DEEP
Data Sheet: 1116
272
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Fuse Holders and Blocks
Add-a-pole Fuse Blocks
Dimensions in ± 0.015" (mm 0.38mm)
BCA Series - Class CC fuses
BMA Series - 13⁄32" X 1 1⁄2" fuses
Adder Block
Fuse
Holders
& Blocks
Specifications
Description: 1-, 2 and 3-pole fuse
blocks for use with Class CC fuses
(BCA Series use Cooper Bussmann®
LP-CC, KTK-R, and FNQ-R), or with
standard 13⁄32" x 1 1⁄2" fuses (BMA Series
1-Pole
use Cooper Bussmann® KTK, FNQ,
FNM, BAF, PV and AGU) Both Series
use an "adder block" to form multi-pole
segmented blocks to achieve the
desired number of poles.
Dimensions: See Dimensions
illustration.
2-Pole
Poles: 1 to 3.
Wire Range: #10-#18 Cu only.
Terminals: Screw/quick connect*
or pressure plate/quick connect*.
Ratings:
Volts: — 600Vac/dc
3-Pole
Amps: — 1⁄10-30A
SCCR: — BCA Series:
200kA RMS Sym.
BMA Series:
10kA RMS Sym.
Agency Information:
BCA Series: CE, UL Listed, UL
4248, Guide IZLT, File E14853.
CSA Certified, C22.2 No. 4248, Class 6225-01, File 47235.
BMA Series: CE, UL Recognized, UL 4248, Guide IZLT2,
File E14853. CSA Certified, C22.2 No. 4248, Class 6225-01,
File 47235.
Flammability Rating: UL 94V0
*Quick connect rated for 20A maximum.
Catalog Numbers
BMA Series
BCA Series
Catalog Numbers
BCA603ASQ
BCA6031SQ
BCA6032SQ
BCA6033SQ
BCA603APQ
BCA6031PQ
BCA6032PQ
BCA6033PQ
Poles
Adder Block
1
2
3
Adder Block
1
2
3
Terminal Type
Screw w/ quick connect
Screw w/ quick connect
Screw w/ quick connect
Screw w/ quick connect
Pressure plate w/ quick connect
Pressure plate w/ quick connect
Pressure plate w/ quick connect
Pressure plate w/ quick connect
Catalog Numbers
BMA603ASQ
BMA6031SQ
BMA6032SQ
BMA6033SQ
BMA603APQ
BMA6031PQ
BMA6032PQ
BMA6033PQ
Poles
Adder Block
1
2
3
Adder Block
1
2
3
Terminal Type
Screw w/ quick connect
Screw w/ quick connect
Screw w/ quick connect
Screw w/ quick connect
Pressure plate w/ quick connect
Pressure plate w/ quick connect
Pressure plate w/ quick connect
Pressure plate w/ quick connect
Data Sheets: BCA Series 1154, BMA Series 1155
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
273
Fuse Holders and Blocks
Class CC, Type M and Class G Fuse Blocks
BC Series
BM Series Type M
Specifications
Description: Class CC fuse blocks for
use with Class CC fuses (Cooper
Bussmann LP-CC, KTK-R, and FNQ-R).
Dimensions: See Data Sheet 1105
Poles: 1 to 3
Ratings:
Volts: — 600V
Amps: — 1⁄10-30A
SCCR:— 200kA RMS Sym.
Agency Information: CE, UL Listed
(Guide IZLT, File E14853), CSA (Class
6225-01, File 47235)
Flammability Rating: UL 94V0
DIN Rail Adapters: See page 413 for
DRA-1 & DRA-2
Catalog Numbers
Screw
BC6031S
BC6032S
BC6033S
Screw
with
Quick
Connect*
BC6031SQ
BC6032SQ
BC6033SQ
Terminal Type
Pressure
Plate w/
Pressure Quick
Plate
Connect*
BC6031P BC6031PQ
BC6032P BC6032PQ
BC6033P BC6033PQ
Box
Lug
BC6031B
BC6032B
BC6033B
Specifications
Specifications
Description: Supplementary fuse
Description: Class G fuse blocks for use
blocks for use with any 13⁄32” x 11⁄2” fuses with Class G fuses (Cooper Bussmann SC).
(Cooper Bussmann® KTK, FNQ, FNM,
Dimensions: See Data Sheet 1106
BAF, PV, and AGU).
Poles: 1 to 3
Dimensions: See Data Sheet 1104
Ratings:
Poles: 1 to 3
Volts: — 600Vac/dc (0-20A)
DIN Rail Adapters: See page 413
— 480Vac/dc (25-60A)
for DRA-1 & DRA-2
Amps: — 1-60A (See Catalog Numbers
Ratings:
table)
Volts: — 600Vac/dc
SCCR: — 100kA RMS Sym.
Amps: — 1⁄10-30A
Agency Information: CE, UL Listed
SCCR:— 10kA RMS Sym.
35-60A (Guide IZLT, File E14853), UL
Agency Information: CE, UL
Recognized 1-30A, (Guide IZLT2, File
Recognized (Guide IZLT2, File
E14853), CSA (Class 6225-01, File 47235).
E14853), CSA (Class 6225-01, File
DIN Rail Adapters: See page 413 for
47235).
DRA-1 & DRA-2.
Flammability Rating: UL 94V0.
Catalog Numbers
Catalog Numbers
Terminal Type
Poles
1
2
3
Data Sheet: 1105
BCCM Series
Screw
with
Quick
Connect*
BM6031SQ
BM6032SQ
BM6033SQ
Terminal Type
Pressure
Plate w/
Quick
Box
Connect*
Lug
BM6031PQ
BM6031B
BM6032PQ
BM6032B
BM6033PQ
BM6033B
Recommended Cover Puller
Description: 3-pole fuse block for use
with (2) Class CC fuses and (1) 13⁄32” x 11⁄2”
fuse
• PF1-WH (White)
• PF1-BK (Black)
Catalog Numbers
Catalog
Numbers
BCCM6033SQ
BCCM6033PQ
BG & G Series
Terminal
Type
Screw with Quick-Connect*
Pressure Plate w/Quick-Connect*
Poles
1
2
3
Screw
with
Quick
Connect*
BG3011SQ
BG3012SQ
BG3013SQ
BG3021SQ
BG3022SQ
BG3023SQ
BG3031S
BG3032S
BG3033S
—
—
—
Pressure
Plate w/
Quick
Connect*
BG3011PQ
BG3012PQ
BG3013PQ
BG3021PQ
BG3022PQ
BG3023PQ
BG3031P
BG3032P
BG3033P
—
—
—
Box Lug
w/retaining
clip
—
—
—
—
—
—
—
—
—
G30060-1CR
G30060-2CR
G30060-3CR
Recommended Cover Puller
• PF1-WH (White)
• PF1-BK (Black)
*Quick-connect terminal rated for 20A max.
Recommended Cover Puller
• PF1-WH (White)
• PF1-BK (Black)
Data Sheet: 1104
274
Box
Lug
BG3011B
BG3012B
BG3013B
BG3021B
BG3022B
BG3023B
BG3031B
BG3032B
BG3033B
—
—
G30060-3C
Data Sheet: 1106
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Amps
1
1-15
to
15
20
20
Poles
1
2
3
1
2
3
25
1
25-30
to
2
30
3
35
1
35-60
to
2
60
3
Fuse Holders and Blocks
Modular Fuse Blocks
BH Series
Modular Type Fuse blocks for Class H &
J Fuses
BH Series Features and Benefits
• BH fuse blocks provide a wide range of mounting
configurations for Cooper Bussmann high speed fuses.
• BH fuse blocks have a Short-Circuit Current Rating of any
installed fuse up to 200kA RMS Sym.
Typical Applications
• Solid State Control Circuits
• VFDs
• UPS Systems
Catalog Numbers
BH-0001
BH-0002
BH-0003
BH-0111
BH-0112
BH-0113
BH-0121
BH-0122
BH-1001
BH-1002
BH-1003
BH-1131
BH-1132
BH-1133
BH-2001
BH-2002
BH-2003
BH-2031
BH-2032
BH-2033
BH-3003
BH-3004
BH-3033
BH-3144
BH-3145
Class H & J Features and Benefits
• H & J modular fuse blocks provide three pole 30 and 60
amp ratings for specific client requirements for separate line
and load fuse clip configurations.
Typical Applications
• Up to 60A, space confined, control circuits
Screw
11241-3SR*
11242-3SR
11241-3SR
11242-3SR**
11239-3SR
11240-3SR**
11241-3SR
11239-3SR*
Catalog Numbers
Fuse
Pressure Plate Class
Volts
11241-3PR*
H
250
250
11242-3PR
11241-3PR
600
H
11242-3PR**
11239-3PR
600
11240-3PR**
11241-3PR
J
600
J
11239-3PR*
Amps
60
60
35
35
60
60
35
60
Fig.
No.
1
2
1
2
1
2
1
1
Note: Order two blocks per fuse (matched or mixed.)
*11239 and 11241 have wire terminals and mounting holes located under fuse. (Figure 1)
**11240 and 11242 have wire terminals and mounting holes located at end of fuse. (Figure 2)
Refer to the data sheet numbers below for the catalog code
description information.
Data Sheet: (BH-0) 1200; (BH-1) 1201; (BH-2) 1202;
(BH-3) 1203
Figure 1
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Figure 2
275
Fuse
Holders
& Blocks
Specifications
Description: For use with Cooper Bussmann®
high speed fuses.
Ratings:
SCCR: — 200kA RMS Sym. or fuse IR, whichever
is lower.
Agency Information: CE, UL Recognized, Guide EZLT2,
File No. E14853 up to 700V, CSA Certified, Class 6225-01,
File No. 47235 up to 700V.
Specifications
Description: 3-Pole only, modular type fuse blocks for
Class H & J fuses with standard reinforced retaining clips.
Ratings:
Volts: — 250V (0-60A See Catalog Numbers table)
— 600V (35-60A See Catalog Numbers table)
Amps: — 0-60A @ 250Vac/dc (See Catalog Numbers table)
— 35-60A@600V (See Catalog Numbers table)
SCCR: — Class J 200kA, Class H 10kA
Agency Information: CE, UL Recognized, Guide IZLT2,
File E14853, CSA Certified, Class 6225-01, File 47235.
Fuse Holders and Blocks
Box Cover Units for Plug Fuses
SOU, SRU, SSN, SSU, SOW, SRW, SSW,
SOX, SRX, SSX, SOY, SRY, SSY, SSY-RL,
SSY-L, STY, SCY, SOY-B & SKA
Specifications
Description: Box covers for standard electrical boxes that
provide fused outlet, fused switch or circuit fuse protection.
Ratings:
Volts: — 125V/250V (See Catalog Numbers table)
Amps: — 0-15A (See Catalog Numbers table)
Agency Information: CE, See Catalog Numbers table.
Features/Benefits
• Cooper Bussmann® Box Cover Units provide a low-cost
method of controlling and protecting small motors when
used with Cooper Bussmann® Type T, Fusetron® ,
dual-element fuses.
• Provide low-cost supplementary protection and
disconnection of 125V or less, single phase circuits.
SOU
SRU
SSU
Typical Applications
• Fractional Horsepower, 125 Volt Single-Phase Motor Circuits
• General 125 Volt Supplemental Circuits
STY
SSN
Catalog Numbers
Catalog
Numbers
SOU
SRU
SSU
SOW
SRW
SSW
SOX
SRX
SSX
SOY
SRY
SSY
SSY-RL
STY3
Type Box
Handy
221⁄41"⁄4"Handy
223⁄43"⁄4"Switch
Switch
4"Octagon
Octagon
4"
Square
4"4"Square
Fuse holder3
Single Double
X
X
X
X
X
X
X
X
X
X
X
X
X
X
SCY
X
SOY-B
SKA
SSN
X
X
1
2
3
4
411⁄16" Square
Single Gang
X
Receptacle
Outlet to Load Switch
125V 250V
Control1
Switch
Light2
X
X
X
X
X
X
X
X
X
X
X
X(2)
X
Motor
Siz e
(Max)
3
⁄4hp
1
⁄2hp
1
⁄2hp
3
⁄4hp
1
⁄2hp
1
⁄2HP
3
⁄4hp
1
⁄2hp
1
⁄2hp
3
⁄4hp
1
⁄2hp
1
⁄2hp
1
⁄2hp
1
⁄2hp
1
⁄2hp (2)
⁄4hp
2hp
1
⁄2hp
3
X(15A)
X
X
General Data
125V, 15A
125V, 15A
125Vac, (do not use on dc), 15A
125V, 15A
125V, 15A
125Vac, (do not use on dc), 15A
125V, 15A
125V, 15A
125Vac, (do not use on dc), 15A
125V, 15A
125V, 15A
125Vac, (do not use on dc), 15A
125Vac, (do not use on dc), 15A
125Vac, (do not use on dc), 15A
125Vac, (do not use on dc),
can protect two motors, 15A
125V, protects two motors, 15A
250V, 15A single phase
Weatherproof model, 15A
Switch turns power to fused load OFF or ON.
Switch light indicates power to load (dark when switch OFF or fuse open).
Double pole switch opens both sides of circuit. Can be used for two separate motors with common switch or a single motor (3⁄4Hp, 250Vac max.).
UL Guide JAMZ, File IE6491; CSA Class 6225-01, File 47235.
Data Sheet: 1129
276
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Ag ency4
Listing/
Cer tification
UL, CSA
UL
UL, CSA
UL, CSA
UL
UL, CSA
UL, CSA
UL
UL, CSA
UL, CSA
UL
UL, CSA
—
UL
UL
UL
UL
UL
Fuse Holders and Blocks
In-line Fuse Holders for 1⁄4" x 7⁄8" to 11⁄4" Fuses
HFB & HFB-10
HHB
HRK
Specifications
Description: Waterproof in-line fuse
holder for 1⁄4" x 11⁄4" fuses.
Dimensions: See Dimensions
illustration.
Construction: Thermoplastic rubber
body with tin-plated, copper contacts.
Ratings:
Volts: — 32V
Amps: — 30A max
Specifications
Description: Universal in-line fuse
holder for 1⁄4" x 7⁄8", 1" and 11⁄4" fuses.
Dimensions: See Dimensions
illustration.
Construction: Nylon body with tinplated, copper contacts.
Ratings:
Volts: — 32V
Amps: — 30A max
Flammability Rating: UL 94V2.
Pull Force: 5lbs minimum to separate
fuse holder housing with fuse installed.
Specifications
Description: Universal in-line fuse
holder for 1⁄4" x 7⁄8" to 1 1⁄4" fuses.
Dimensions: See Dimensions
illustration.
Construction: 8" (203mm) #14 lead
wires.
Ratings:
Volts: — 32V
Amps: — 15A max
Catalog Numbers
Description
Standard Pack (10-in)
Bulk Pack (100-in)
HFB Replacement Contact Clip
HFB-10** Replacement Contact Clip
*HFB accepts #12 to #18 wire leads (not provided). See
Data Sheet for recommended crimp tools.
**HFB-10 accepts #10 wire leads (not provided). See Data
Sheet for recommended crimp tools.
Features/Benefits
• Simple assembly with one-piece
thermoplastic (important information
molded into body)
• High visibility yellow color for easy
identification in dark or hard-to-access
locations
• Ideal for shock and vibration
environments; withstands many
organic solvents; temperature
range -40/+150°C
Typical Applications
• Supplemental, Low Voltage, Low
Amperage Control Circuits
Features and Benefits
• HHB Universal in-line fuse holder for
1
⁄4" x 7⁄8", 1" and 1 1⁄4" fuses.
Typical Applications
• Supplemental, Low Voltage, Low
Amperage Control Circuits
Catalog Numbers
Holder — without leads* - RoHS compliant
Catalog Numbers
Description
HHB-R
Standard Pack (10-in)
BK/HHB-R
Bulk Pack (100-in)
*Accepts #12 to #16 wire leads (not provided with basic fuse
holder). See Data Sheet for recommended crimp tools.
Holder — with pre-attached #14 Insulated
lead wires - Not RoHS compliant unless
noted
Catalog Numbers
Wire
19" Length
8" Length
Color
BK/HHB-Y419
BK/HHB-Y408
Yellow
BK/HHB-R419
BK/HHB-R408**
Red
BK/HHB-B419
BK/HHB-B408
Black
Features and Benefits
• HRK Universal in-line fuse holder for
1
⁄4" x 7⁄8", 1" and 11⁄4" fuses with #14
lead wires.
• RoHS compliant
Typical Applications
• Supplemental, Low Voltage, Low
Amperage Control Circuits
Catalog Number
Catalog
Number
HRK-R*
Amp
Rating Volts
15
32
Fuse Description
⁄4" diameter fuses of
different lengths.
1
*Three springs furnished with fuse holder to accommodate
different length 1⁄4" fuses.
Dimensions - in (mm)
2.19"
(55.6mm)
0.75"
(19.1mm)
0.69"
(17.5mm)
1.56"
(39.7mm)
**RoHS compliant.
0.38"
(9.5mm)
Dimensions - in (mm)
Dimensions - in (mm)
Fuse Length
7
⁄8" (AGW)
1" (AGX)
11⁄4" (AGC, MDL)
3"
(76.2mm)
Fuse Holder Length “L”
2.100 Max
2.250 Max
2.420 Max
L
0.75"
0.53"
(19.1mm)
Data Sheet: 2102
(13.5mm)
Data Sheet: 2103
Data Sheet: 2111
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
277
Fuse
Holders
& Blocks
Catalog
Numbers
HFB*
BK/HFB
BK/1A2294
1A2294-01
Fuse Holders and Blocks
In-line Fuse Holders
HR and HM
Series
Specifications
Description: In-line
fuse holders for SFE
and 1⁄4" dia. x various
length fuses.
Dimensions: See
Dimensions
illustration.
Ratings:
Volts: — 32V
Amps: — 20A
Features and Benefits
• HR and HM Universal in-line fuse
holder for SFE and various length 1⁄4"
diameter fuses with #14 lead wires.
Typical Applications
• Supplemental, Low Voltage, Low
Amperage Control Circuits
Catalog Numbers
Catalog
Numbers
HRJ*
HRI
HRH
HRE
HRG
HRF
HMJ**
HMI
HMH
HME
HMG
HMF
Includes
Fuse
SFE-20
SFE-14
SFE-9
SFE-71⁄2
SFE-6
SFE-4
SFE-20
SFE-14
SFE-9
SFE-71⁄2
SFE-6
SFE-4
Wire Length
& Siz e
19” of #14
HHJ-B
HHI-B
8” of #14
For 1⁄4" x 11⁄4" fuse, no wire or fuse
included, accepts #18 - #22 wire.
For 1⁄4" x 11⁄4" fuse, no wire or fuse
included, accepts #12 - #16 wire.
Specifications
Description: In-line water-resistent
fuse holders for 1⁄4" x 11⁄4" fuses.
Dimensions: See Dimensions
illustration.
Construction: Phenolic body with
copper crimp contact leads.
Ratings:
Volts: — 250V
Amps: — 20A
Agency Information: CE, UL
Recognized, (Guide IZLT2, File
E14853) UL.
Flammability Rating: UL 94HB.
Specifications
Description: In-line fuse holders for
5 x 15mm or 5 x 20mm fuses.
Dimensions: See Dimensions
illustration.
Construction: Black thermoplastic
body with brass contacts, wire: 16
AWG, red.
Ratings:
Volts: — 32V
Amps: — 5A (5 x 15mm)
— 10A (5 x 20mm)
Typical Applications
• Supplemental, Low Voltage, Low
Amperage Control Circuits
Features and Benefits
• HHT in-line fuse holders for 5 x 15mm
and 5 x 20 mm fuses.
Typical Applications
• Supplemental, Low Voltage, Low
Amperage Control Circuits
Catalog Numbers
Catalog Number
HHT
Refer to data sheet for recommend
crimp tools
Fuse Siz e
5 x 15mm & 5 x 20mm
Dimensions - in
1/4" ± 1/32"
Catalog Numbers
For 1⁄4" x 11⁄16" fuse, no wire or fuse
included, accepts #12 - #16 wire.
Replacement Contacts
Catalog
Number
9838
9841
HHT Series
Features and Benefits
• HFA in-line, water-resistent fuse holder
for 1⁄4" x 11⁄4" fuses.
* Also available as in-line fuse holder only with lead wire
contacts, HRJ-LESS-Fuse.
** Also available as in-line fuse holder only with lead wire
contacts, HMJ-LESS-Fuse.
HHJ-A
HFA Series
Catalog
Numbers
HFA
HFA-HH*
6-3/16" ± 1/4"
Terminals
Crimp #12 - #16
1
⁄4" Quick Connect
*No UL Recognition.
Symbol
HHJ-A
HHJ-B
1.84"
WIRE LENGTH: 13" ± 0.5"
Dimensions - in (mm)
0.42" DIA.
2.34"
(59.5mm)
1.84"
Dimensions - in (mm)
.800"
.600"
(20.3mm)
(15.2mm)
2.19"
(55.6mm)
0.75"
(19.1mm)
0.69"
(17.5mm)
1.56"
(39.7mm)
Data Sheet: 2122
278
6-1/16" ± 1/4"
(IN ASSEMBLED POSITION)
0.38"
(9.5mm)
Data Sheet: 2115
Data Sheet: 2138
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Fuse Holders and Blocks
Tron™ In-line Fuse Holders
HEG Series
HEH Series
HEC Series
HEJ Series
Specifications
Description: Single-pole,
non-breakaway, in-line fuse
holders for Type SC fuses,
480V (or less).
Ratings:
Volts: — 600V
Amps: — 0-15A
Fuse Size: 13⁄32" x 1.31"
Specifications
Description: Single-pole,
non-breakaway, in-line fuse
holders for Type SC fuses
(Also fuse types BBS & KTQ,
nominal size 13⁄32" x 1 3⁄8").
Ratings:
Volts: — 600V
Amps: — 0-20A
Agency Information: CSA
- 15A.
Specifications
Description: Single-pole,
non-breakaway, in-line fuse
holders for Type SC-25, &
SC-30 fuses, size
13
⁄32" x 1 5⁄8".
Ratings:
Volts: — 480V
Amps: — 0-30A
Specifications
Description: Single-pole,
non-breakaway, in-line fuse
holders for Type SC and Type
HVW fuses, size 13⁄32" x 2 1⁄4".
Ratings:
Volts: — 480V
Amps: — 35-60A Type SC
— 1⁄2-6A Type HVW
Catalog Number
HEG-AA
Catalog Numbers
Optional Boots:
HEH-AA, HEH-BB, HEH-AD
2A0660 Single Conductor
2A0661 Two Conductor
Optional Boots:
Catalog Numbers
Catalog Numbers
HEC-AA, HEC-RW-RLB-R
HEJ-AA, HEJ-AB, HEJ-AC, HEJ-BB,
HEJ-JJ, HEJ-JK, HEJ-LL, HEJ-LLB,
HEJ-CC, HEJ-DD, HEJ-WW, HEJ-PP,
HEJ-QQ
Optional Boots:
2A0660 Single Conductor
2A0661 Two Conductor
Optional Boots:
2A0660 Single Conductor
2A0661 Two Conductor
Fuse
Holders
& Blocks
2A0660 Single Conductor
2A0661 Two Conductor
Data Sheet: 2124
Data Sheet: 2124
Data Sheet: 2124
Data Sheet: 2123
HEB Series
HET Series
HEY Series
HEX Series
Specifications
Description: Double-pole
in-line fuse holders for KTKR fuses with optional breakaway receptacle, polarized,
and accepting Class CC
branch circuit fuses (Cooper
Bussmann® KTK-R, FNQ-R
& LP-CC; 600V or less,
200,000A IR).
Ratings:
Volts: — 600V
Amps: — 0-30A
Specifications
Description: Double-pole inline fuse holders for 13⁄32" x 1 1⁄2"
fuses (typically fuse types
BAF, FNM, FNQ, and KTK
1
⁄10 - 30A).
Ratings:
Volts: — 600V
Amps: — 0-30A
Specifications
Description: Single-pole
in-line fuse holders for any
13
⁄32" x 1 1⁄2" fuses (typically
fuse types: BAF, FNM, FNQ,
and KTK 1⁄10 - 30A).
Ratings:
Volts: — 600V
Amps: — 0-30A
Catalog Numbers
See Page 280
Specifications
Description: Single-pole
in-line fuse holders for
13
⁄32" x 1 1⁄2" fuses with a
permanently solid neutral
identified by white plastic
coupling nut.
Catalog Numbers
HET-AA, HET-AB, HET-AW, HETAW-RLC-A, HET-AW-RLC-B, HETAW-RLC-C, HET-AW-RLC-J, HETAW-RYC, HET-BB, HET-BW-RLC-B,
HET-BW-RYC, HET-JJ, HET-JK,
HET-JW, HET-JW-RLC-J, HET-JWRYC, HET-KK
Catalog Numbers
HEY-AA, HEY-AB, HEY-AC, HEYAD, HEY-AE, HEY-AL, HEY-AWDRLC-A, HEY-AW-DRLC-B, HEYAW-DRYC, HEY-BB, HEY-JJ
Data Sheet: 2127
Data Sheet: 2125
Data Sheet: 2126
Catalog Numbers
HEX-AA, HEX-AB, HEX-AC, HEX-AD,
HEX-AE, HEX-AW, HEX-AW-DRLC-A,
HEX-AW-DRYC, HEX-AW-RLC-A,
HEX-AW-RYC, HEX-AY, HEX-BB,
HEX-CC, HEX-JJ, HEX-JK, HEX-JWDRYC, HEX-KK
Data Sheet: 2126
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
279
Fuse Holders and Blocks
For HEB Holders Only
Directions: To select complete holder P/N, work from left to right starting with loadside terminal options and then lineside terminal options. Then determine breakaway or non-breakaway style.
Lineside Terminal
Loadside Terminal
Available P/N’s
Terminal
Type
No. of
Terminal
Wire Siz e Wires per Solid Stranded
W
i
r
e
W
i
r
e
T
ype
Terminal
No. of
Wire Siz e Wires per Solid Stranded
Wire
Terminal Wire
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Setscrew
Copper
Setscrew
Copper
Setscrew
Copper
Setscrew
Aluminum
Setscrew
Aluminum
Crimp
Aluminum
Crimp
Aluminum
Crimp
Aluminum
Crimp
Aluminum
Crimp
#12 to #8
#12
#12 to #8
#12
#12 to #8
#12
#12 to #8
#12
#12 to #8
#12
#12 to #8
#12
#12 to #8
#12
#12 to #8
#12
#12 to #8
#12
#12 to #8
#12
#6
#10
#6
#10
#6
#10
#6
#10
#4
#8
#2
#6
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
#12 to #8
#12
#6
#10
#4
#8
#2
#6
2/0
#3
1
2
1
2
1
2
1
2
1
2
Y
Y
Y
Y
N
Y
N
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
#12 to #3
1
Y
#12 to #3
2
#12 to #2
#12 to #2
#20, #18
1
Y
Y
#12 to #3
1
Y
Y
#12 to #3
1
Y
Y
#12 to #3
1
Y
Y
#12 to #3
1
Y
Y
#12 to #2
1
Y
Y
#8
#6
#6
#4
#3, #4
#2
1
1
1
1
1
1
N
Y
N
Y
N
Y
Y
N
Y
N
Y
N
#1, #2
1
N
Y
1/0
1
N
Y
1
Y
N
1
N
Y
SolidTerminal #8 to #12
for aluminum
connector
#10 to #14
(1)UL Recognized, Guide IZLT2, File E14853
(2)CSA Certified, Class 6225-01, File 47235
(3)CE
(4)HEB-AW-RLC-C is for (1) #4 stranded wire only.
280
Copper
Crimp
Copper
Crimp
Copper
Crimp (4)
Copper
Crimp
Copper
Crimp
Copper
Setscrew
Copper
Setscrew
Aluminum
Setscrew
Aluminum
Setscrew
Aluminum
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Crimp
Copper
Setscrew
Copper
Setscrew
Aluminum
Setscrew
Aluminum
Setscrew
Aluminum
Setscrew
Aluminum
Crimp
Aluminum
Crimp
Aluminum
Crimp
Aluminum
Crimp
Aluminum
Crimp
Non-Breakaway
P/N
Breakaway
P/N
(Boots not included)
(Boots included)
HEB-AA(1)(2)
(3)
HEB-AW-RLC-A(1)(2)
(3)
HEB-AB(2)
HEB-AW-RLC-B
HEB-AC(2)
HEB-AW-RLC-C(4)
HEB-AD(2)
N/A
HEB-AE(2)
N/A
Y
HEB-AJ
HEB-AW-RLC-J
Y
Y
HEB-AK
HEB-AW-RYC
1
Y
Y
HEB-AL
HEB-AW-RLA
2
Y
Y
HEB-AY
HEB-AW-RYA
#1, #2
1
N
Y
HEB-AR
N/A
#12 to #8
#12
#6
#10
#4
#8
#2
#6
#4
#8
#2
#6
#12 to #8
#12
1
2
1
2
1
2
1
2
1
2
1
2
1
2
Y
Y
Y
Y
N
Y
N
Y
N
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
HEB-BA(2)
HEB-BW-RLC-A
HEB-BB(2)
HEB-BW-RLC-B
HEB-BC(2)
N/A
HEB-BD(2)
N/A
HEB-CC(2)
N/A
HEB-DD(2)
N/A
HEB-ZA
N/A
#12 to #3
1
Y
Y
HEB-JJ
HEB-JW-RLC-J
#12 to #3
2
Y
Y
HEB-JK
HEB-JW-RYC
#12 to #2
1
Y
Y
HEB-JL
N/A
#12 to #2
2
Y
Y
HEB-JY
N/A
#12 to #2
1
Y
Y
HEB-LL
HEB-LW-RLA
#8
#6
#6
#4
#3, #4
#2
1
1
1
1
1
1
N
Y
N
Y
N
Y
Y
N
Y
N
Y
N
HEB-NN
N/A
HEB-PP(2)
N/A
HEB-QQ(2)
N/A
#1, #2
1
N
Y
HEB-RR(2)
N/A
1/0
1
N
Y
HEB-TT(2)
N/A
1
Y
N
1
N
Y
HEB-SS
N/A
SolidTerminal #8 to #12
for aluminum
connector
#10 to #14
Insulating boots for single conductor-2A0660
Dual conductor-2A0661
Contact your local Cooper Bussmann representative for other possible
terminations not listed.
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Data Sheet: 2127
Fuse Holders and Blocks
Panel Mounted Fuse Holders for 5 x 20mm Fuses
HTC-35M
37.5mm
12.70mm +0.0
–0.1
Ø15mm
4mm
5.5mm
HTC-40M
Data Sheet: 2110
11mm
12.00mm +0.0
–0.1
12.70mm +0.0
–0.1
3.0x0.51mm
Ø15mm
Ø22mm
37.5mm
Ratings:
Volts: — 250Vac
Amps: — 10A UL, 6.3A VDE
Fuse Access: Screwdriver slot
12.00mm +0.0
–0.1
3.0x0.51mm
Ø16mm
Ratings:
Volts: — 250Vac
Amps: — 10A UL, 6.3A VDE
Fuse Access: Threaded cap
6.5mm
Data Sheet: 2110
36mm
HTC-55M
12.00mm +0.0
–0.1
3.0x0.51mm
Ø15mm
Ratings:
Volts: — 250Vac
Amps: — 10A UL, 6.3A VDE
Fuse Carrier: Bayonet type
12.70mm +0.0
–0.1
Ø16mm
0.5mm
4mm
5.5mm
11mm
35.5mm
Data Sheet: 2110
10.2mm
12.00mm +0.0
–0.1
0.5mm
4mm
5.5mm
11mm
Fuse
Holders
& Blocks
Ratings:
Volts: — 250Vac
Amps: — 10A UL, 6.3A VDE
Fuse Carrier: Bayonet type
4.8x0.51mm
Ø15mm
HTC-70M
12.70mm +0.0
–0.1
Ø16mm
Data Sheet: 2110
Specifications
Terminals:
Molded Materials:
Solderability:
Agency Information:
Electrical:
Shock Safety:
Packaging:
Tin-plated brass.
High temperature thermoplastic that meets the flammability ratings of UL 94V0; Glow Wire Test:
960°C per IEC 60695-2-1.
In accordance with IEC 68-2-20.
cURus, VDE
Contact Resistance: ≤ 10 megohm; Insulation Resistance: ≥ 10MΩ; Dielectric Strength ≥
2000Vac.
PC2 (fuse holders).
Standard Qty 10 (No Prefix), Bulk Qty 100 (Prefix Catalog Number with BK/).
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
281
Fuse Holders and Blocks
Panel Mounted Fuse Holders for 1⁄4" x 11⁄4" Fuses
HKP, HKP-L, HKP-W
HKP-BBHH, HKP-HH and
HKP-LW-HH
HKP-OO
Specifications
Description: Standard fuse holders.
Dimensions: See Dimensions
illustration.
Ratings:
Volts: — 250V
Amps: — 30A
Specifications
Description: Fuse holders with 1⁄4"
quick-connects.
Dimensions: See Dimensions
illustration.
Ratings:
Volts: — 250V
Amps: — 15A
Catalog Numbers
Specifications
Description: Snap-lock fuse holders.
Dimensions: See Dimensions
illustration.
Ratings:
Volts: — 250V
Amps: — 30A
Catalog Numbers
Catalog Numbers
Catalog
Numbers
HKP
HKP-L
HKP-W
Fuse
Description
—
HKP w/ 2250V stand-off barrier
HKP w/ drip-proof knob
Catalog
Numbers
HKP-BBHH
HKP-HH
HKP-LW-HH
Dimensions - in (mm)
Fuse
Description
HKP w/ 1⁄4" quick-connects, nut and washer
assembled.
HKP w/ 1⁄4" quick-connect.
HKP w/ drip-proof knob, 2250V stand-off
barrier and 1⁄4" quick-connects.
Catalog
Number
HKP-OO
Fuse
Description
HKP with snap-lock
Dimensions - in (mm)
.75"
(19.1mm)
1.56"
(39.7mm)
SE
F
US
E
FU
Dimensions - in (mm)
.855"
(21.7mm)
1.17"
FUSE
.800"
(20.3mm)
Punched Mounting Hole
.890"
(22.6mm)
.811"
(20.6mm)
Data Sheet: 2106
Data Sheet: 2106
Data Sheet: 2106
Specifications
Terminals:
Agency Information:
Replacement Parts:
282
Bayonet-type knob.
Vibration resistant.
For panels up to 5⁄16" (7.9mm) thick.
CE (HKP, HKP-L, HKP-W, HKP-OO), UL Recognized — Guide IZLT2, File E14853, CSA
Certified — Class 6225-01, File 47235
Cap: 9435-1/2
Plastic Nut: BK/1A4287 (100 pieces minimum)
Metal Nut: BK/1A4806-2 (100 pieces minimum)
Washer: 9732
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Fuse Holders and Blocks
Panel Mounted Fuse Holders for 5 x 20mm
and 1⁄4" x 1 1⁄4" Fuses
HTB Series
Specifications
Description: Fuse holders with knob-type carriers.
Dimensions: See Dimensions illustrations.
Construction: High temperature, flame retardant
thermoplastic; UL Component Recognized; UL 94V0;
mounting nut, spacer-black polycarbonate. Terminals:
tin-plated brass.
Electrical Data: Insulation resistance (per IEC #257) —
10,000 ohms @ 500Vdc; contact resistance (per IEC #257)
— 0.005 ohms Max @ 1A; standoff voltage (per IEC #257)
— 480V/Mil @ 0.125” thickness.
Agency Information: CE, UL Recognized — Guide IZLT2,
File E14853, 1⁄4˝ dia fuse @ 20A, 5mm dia fuse @16A @
250V, CSA — 16A @ 250V Class 6225-01 File 47235; VDE
Certified: 136128, HTB-XXM, SEMKO Certification: Ref.
#0146149/01, HTB-XXM.
Mounting: Withstands 15 to 20 Lb-In torque to mounting
nut when mounting fuse holder to panel.
Environmental: Maximum operating
temperature -55°C to 85°C.
Replacement Par ts
Dimensional Data - in (mm)
Knob Type Carrier
Terminal Options
Maximum
Panel
Thickness
Common Dimensions:
Length (Knob Type) - 1.69"
(42.9mm) Plus In-Line Terminal
NOTE: Plus In-Line Terminal
0.47"
1.125"
(11.9mm)
(28.6mm)
Fuse
Holders
& Blocks
Solder/
3
⁄16" Quick-Connect
Carrier Options
⁄4" Quick-Connect
1
⁄4" x 11⁄4"
5 x 20mm
(“I” Equals Inches) (“M” Equals Metric)
Knob
Knob
1
In-Line
0.34"
8.7mm)
Rt. Angle
0.33"
(8.3mm)
In-Line
0.47"
(11.9mm)
HTB-26I-R
Rt. Angle
0.45"
(11.5mm)
0.30”
HTB-22I-R
HTB-24I-R
HTB-28I-R
7.62mm
HTB-22M-R
HTB-24M-R HTB-26M-R HTB-28M-R
0.125”
HTB-42I-R
HTB-44I-R
3.18mm
HTB-42M-R
HTB-44M-R HTB-46M-R HTB-48M-R
0.30”
HTB-62I-R
HTB-64I-R
7.62mm
HTB-62M-R
HTB-64M-R HTB-66M-R HTB-68M-R
0.125”
HTB-82I-R
HTB-84I-R
3.18mm
HTB-82M-R
HTB-84M-R HTB-86M-R HTB-88M-R
X
X
0.09" NOM.
(2.4mm)
0.69"
0.91"
(17.5mm)
(23.0mm)
0.67"
0.92"
(17.1mm)
(23.4mm)
0.47"
1.125"
(11.9mm)
(28.6mm)
HTB-46I-R
HTB-66I-R
HTB-86I-R
HTB-48I-R
HTB-68I-R
HTB-88I-R
X
X
X
X
X
Fuse holders and fuse carriers may be ordered separately.
For product data sheets, visit www.cooperbussmann.com/products/datasheets/ulcsa
X
Data Sheet: 2119
283
Fuse Holders and Blocks
Panel Mounted Fuse Holders for 5 x 20mm
and 1⁄4" x 1 1⁄4" Fuses
HTB Series
Dimensional Data - in (mm)
Screwdriver Type Carrier
Terminal Options
Carrier Options
Solder/
3
⁄16" Quick-Connect
Maximum
Panel
Thickness
Common Dimensions:
(Screwdriver Slotted)
1.75" (44.5mm)
NOTE: Plus In-Line Terminal
0.17"
1.58"
(4.37mm)
(40.03mm)
In-Line
Rt. Angle
0.34"
⁄4" Quick-Connect
1
0.47"
0.33"
8.7mm)
Rt. Angle
In-Line
0.45"
(11.9mm)
(8.3mm)
1
⁄4" x 1 1⁄4"
5 x 20mm
(“I” Equals Inches) (“M” Equals Metric)
Screwdriver
Screwdriver
(11.5mm)
0.30”
HTB-32I-R
HTB-34I-R
HTB-36I-R
HTB-38I-R
7.62mm
HTB-32M-R
HTB-34M-R HTB-36M-R HTB-38M-R
0.125”
HTB-52I-R
HTB-54I-R
3.18mm
HTB-52M-R
HTB-54M-R HTB-56M-R HTB-58M-R
0.125”
HTB-92I-R
HTB-94I-R
3.18mm
HTB-92M-R
HTB-94M-R HTB-96M-R HTB-98M-R
X
X
HTB-3
0.41"
1.34"
(10.31mm)
(34.13mm)
HTB-5
0.17"
1.59"
(4.37mm)
(40.08mm)
HTB-9
HTB-56I-R
HTB-96I-R
HTB-58I-R
HTB-98I-R
X
X
X
X
Catalog Number Build-A-Code
FUSE CARRIER ONLY
HTBS
Packing
Blank (Std.) – 10 fuse holders
in a carton
BK – 100 fuse holders in a
cardboard shelf package
Product
Symbol
Body Configuration and Mounting
Knob Holders
2 — Low Profile (Rear Panel Hex-Nut)
4 — High Profile
6—
* (Front Panel Hex-Nut)
8 — Low Profile (Snap-In)
Screwdriver Slotted Holders
3 — Low Profile
5 — High Profile
9 — Low Profile (Snap-In)
Fuse Carrier
I — 1/4˝ x 1 1/4˝
M — 5 x 20mm
Rear Terminal Configuration
2 — Solder / 3/16˝ Quick-Connect
(In-Line)
4 — Solder / 3/16˝ Quick-Connect
(Right Angle)
6 — 1/4˝ Quick-Connect (In-Line)
8 — 1/4˝ Quick-Connect (Right Angle)
P
Splash Proof
Cap with O-Ring
(Optional on Knob
Holders Only)
-R
RoHS
Compliant
Packaging
(Blank) – Std.
BK/ – Bulk
Product
Symbol
FT — Knob Type
(For 20, 40, 60,
and 80 Series
Only)
ST — Screwdriver
Slotted (For 30,
50, and 90 Series
Only)
*Profile varies with panel thickness. Holder installs through rear of panel.
Data Sheet: 2119
284
For product data sheets, visit www.cooperbussmann.com/products/datasheets/ulcsa
Fuse Carrier
I — 1/4˝ x 1 1/4˝
M — 5 x 20mm
Fuse Holders and Blocks
Panel Mounted Fuse Holders for Indicating Type Fuses
HLD
HJL
HK Series
Specifications
Description: Pin indicating for
1
⁄4" x 11⁄4" fuses.
Dimensions: See Dimensions
illustration.
Ratings:
Volts: — 250V
Amps: — 15A
Agency Information: CE, UL
Recognized, File E14853, Guide IZLT2.
Specifications
Description: Neon lamp indicating for
1
⁄4" x 1" fuses.
Dimensions: See Dimensions
illustration.
Ratings:
Volts: — 250V
Amps: — 15A
Agency Information: None
Specifications
Description: Neon and incandescent
lamp indicating for 1⁄4" x 11⁄4" fuses
Dimensions: See Dimensions
illustration.
Ratings:
Volts: — 250V
Amps: —15A (HKL, HKL-X)
— 20A (HKR, HKT, HKU, HKX)
Agency Information: CE, UL
Recognized, (Guide IZLT2, File
E14853), CSA Certified
(Class 6225-01, File 47235).
Catalog Numbers
Catalog
Numbers*
HLD
HLD-HH
Terminals
Solder terminals
1
⁄4" quick-connect terminals
*Use w/GBA, GLD Fuses.
Catalog Number
Catalog
Number*
HJL
Lamp
Volts
Color
90 to 250 Clear
Knob
Type
Oct
*Use with AGX or MKB fuses, for panels up to 1⁄8" thick.
Catalog Numbers
Dimensions - in (mm)
2.81"
(71.4mm)
1.19"
(30.2mm)
2.5" (HLD)
(63.5mm)
0.81"
(20.6mm)
0.69"
(17.5mm)
Octagonal Sides
Octagonal Sides
(69.9mm)
(16.0mm + .13mm)
Knob Color/Type
Clear/Oct
Clear/FS
Amber/Oct
Amber/Oct
Red/Oct
Amber/FS
* Neon lamp — UL Recognized and CSA Certified.
** Incandescent lamp.
2.75" (HLD-HH)
Punched Mounting Hole
Punched Mounting Hole
.505" + .005"
Lamp
Volts
90-250
90-250
22-30
13-22
4-6
22-33
Dimensions - in (mm)
.630" + .005"
(16.0mm + .13mm)
2.81"
.590" + .003"
(14.6mm + .08mm)
.473" + .005"
(71.4mm)
Flat-Sides
1.19"
(30.2mm)
(12.0mm + .13mm)
0.81"
(20.6mm)
Octagonal Sides
Punched Mounting Hole
.630" + .005"
(16.0mm + .13mm)
.573" + .003"
(14.6mm + .08mm)
Data Sheet: 2120
Data Sheet: 2121
Data Sheet: 2105
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
285
Fuse
Holders
& Blocks
Dimensions - in (mm)
Catalog
Numbers
HKL*
HKL-X*
HKR**
HKT**
HKU**
HKX**
Fuse Holders and Blocks
Panel Mounted Fuse Holders for 13⁄32" x 1 5⁄16" to 1 1⁄2" Fuses
HPF
HPS
HPG
HPD
#10 wire max
for solder connection
Specifications
Description: Standard fuse holders
with screw-type knob for 13⁄32" x 15⁄16" to
11⁄2" Fuses.
Dimensions: See Dimensions
illustration.
Agency Information: CE, UL
Recognized, Guide IZLT2, File E14853;
CSA Certified, Class 6225-01, File
47235.
Flammability Rating: UL 94HB.
Terminals: Combination 1⁄4"
quick-connect/solder terminals.
Catalog Numbers
Catalog
Numbers
HPF
HPF-C
HPF-L
HPF-EE
HPF-JJ
HPF-FF1
HPF-RR
Amp
Ratings
302
303
5
15
20
302
302
Volts
600
6003
600
600
600
480
600
HPF-WT
302
600
1
2
3
Specifications
Description: Standard fuse holders
with bayonet-type knob for 13⁄32" x 15⁄16"
to 11⁄2" fuses.
Dimensions: See Dimensions
illustration.
Agency Information: CE, UL
Recognized, Guide IZLT2, File E14853;
CSA Certified, Class 6225-01, File
47235.
Flammability Rating: UL 94HB.
Terminals: Combination 1⁄4" quickconnect/solder terminals.
Catalog Numbers
Fuse Description
1 1⁄2" (38.1mm)
1 1⁄2" (38.1mm) clear knob.
BBS, 13⁄32" x 1 3⁄8" fuses.
SC 0-15, 13⁄32" x 1 5⁄16" fuses.
SC 20, 13⁄32" x 1 13⁄32" fuses.
SC 25 & 30, 13⁄32" x 1 5⁄8" fuses.
KTK-R, LP-CC & FNQ-R
Class CC fuses.
Splash-proof knob. 13⁄32" x 1 1⁄2"
(38.1mm)
No CSA Certification
20A max when used with quick-connect terminals.
HPF-C ratings for CSA-15A, 250V
Dimensions - in (mm)
Catalog
Symbol
HPS
HPS-L
HPS-EE*
HPS-JJ*
HPS-F-EE1
Amp
Ratings
30 2 3
5
15
20
15
Volts
600
600
600
600
600
Fuse Description
⁄32" x 1 1⁄2"
BBS, 13⁄32" x 1 3⁄8" fuses.
SC 0-15, 13⁄32" x 1 5⁄16" fuses.
SC 20, 13⁄32" x 1 13⁄32" fuses.
Sleeve on body, leaded for
13
⁄32" x 15⁄16" fuses.
1
2
HPS-FF*
30
480 SC 25 & 30, 13⁄32" x 1 5⁄8" fuses.
HPS-RR*1
30 2
600 KTK-R, LP-CC, FNQ-R Class
CC fuses.
*-EE, -JJ, -FF and -RR versions are UL Recognized for
applications requiring branch circuit protection.
1
No CSA Certification
2
20A max when used with quick-connect terminals.
3
HPS rated at 250V for CSA
13
Specifications
Description: Standard fuse holders
with bayonet-type knob for 13⁄32" x 11⁄2"
fuses.
Dimensions: See Dimensions
illustrations.
Agency Information: CE, UL
Recognized, (Guide IZLT2, File
E14853).
Flammability Rating: UL 94V0 - fuse
holder body UL 94HB - Knob.
Catalog Numbers
Catalog Amp
Numbers Ratings Volts
Fuse Description
13
HPG*
301
600
⁄32" x 1 1⁄2" fuses
HPG-EE* 15
600
SC 0-15, 13⁄32" x 1 5⁄16" fuses.
13
HPD**
301
600
⁄32" x 1 1⁄2" fuses
1
20A max when used with quick-connect terminals.
*HPG and HPG-EE has combination 1⁄4" quick-connect/solder
terminals on both side (load) and rear (line) terminals.
**HPD has combination 1⁄4" quick-connect/solder terminal on
side (load) terminal only. Rear (line) terminal is 3⁄16" shorter
than HPG. Rear terminal solder only.
Dimensions - in (mm)
HPG, HPG-EE
0.88"
(22.2mm)
1.125"
Dimensions - in (mm)
(28.6mm)
With Fuse
2.81" Max.
(71.4mm)
E
USE
FU
With Fuse
SE F
1.00"
1.31"
2.81"
1.78"
HPD
(71.4mm)
(25.4mm) (33.3mm) (45.2mm)
0.88"
FUS
(22.2mm)
0.180" DIA.
1.125"
(4.6mm)
(28.6mm)
0.88"
1.78"
(22.2mm)
0.250" ± 0.003"
(6.35 ± .08mm)
(Typ.2)
(45.2mm)
2.69" Max.
(68.3mm)
Without Fuse
0.250" ± .003"
(6.35 ± .08mm)
(Typ.2)
0.180"
(4.6mm)
1.125"
(28.6mm)
0.80"
(20.2mm)
2.41"
(64.3mm)
Without Fuse
Data Sheet: 2114
286
Data Sheet: 2113
2.81"
(71.4mm)
Data Sheet: 2108
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Fuse Holders and Blocks
Panel Mounted Fuse Holders for 13⁄32" x 1 1⁄2" Fuses
HPM
HPC-D
HPS2
#10 wire max
for solder connection
Specifications
Description: Standard fuse holder
with screw-type knob for 13⁄32" x 11⁄2"
fuses.
Dimensions: See Dimensions
illustration.
Ratings:
Volts: — 600Vac/dc
Amps: — 30A1
1
20A max when used with quick-connect terminals.
Catalog Numbers
Catalog
Numbers
HPM
HPM-D
Description
⁄4" quick-connect/solder
Splash-resistant knob 2
1
HPM-D has 1⁄4" quick-connect/solder terminal on rear (load)
terminal only. The side (line) terminal is 1⁄4" quickconnect only.
2
1
20A max when used with quick-connect terminals.
Agency Information: CE, UL
Recognized, Guide IZLT2, File E14853.
Flammability Rating: UL 94HB.
Catalog Numbers
Catalog
Number
HPC-D
Description
Mount in panels up to 1⁄4" thick.
Replacement knob - BK/9987SA
Dimensions
Specifications
Description: For fuse size 13⁄32" x 11⁄2",
meeting UL 1598 requirement that both
poles be removed simultaneously.
Dimensions: See Dimensions
illustration.
Ratings:
Volts: — 600V@30A
Amps: — 0-30A 1
1
20A max when used with quick-connect terminals.
Agency Information: UL 4248
recognized, (Guide IZLT2, File
E14853), CSA certified:
(Class 6225-01, File 47235).
Flammability Rating: UL 94V0.
Terminals: 1⁄4” quick-connect/solder.
Catalog Numbers
Catalog
Numbers
HPS2
BK/HPS2
Standard 10-in carton
Bulk 100-in carton
With Fuse
2.48"
(63.1mm)
Dimensions
Dimensions
0.88"
(22.2mm)
With Fuse
2.73"
(69.5mm)
1.775"
0.94"
(45.1mm)
(23.8mm)
0.180"
1.41"
(4.6mm)
(30.6mm)
1.120"
(30.5mm)
2.594"
(65.89mm)
Without Fuse
Mounting Hole
Flange Rear of Panel
Mounting Hole
Flange Front of Panel
1.031" + 0.003"
0.250" ± 0.003"
(6.35 ± 0.08mm)
(26.2mm + 0.08mm)
0.187" + 0.002"
(4.75mm + 0.05mm)
Nut Torque: 30 lb-in.
Replacement Knob:
Catalog Number: BK/9789-Y2
(50 pieces)
Data Sheet: 2112
1.312" + 0.003"
(33.3mm + 0.08mm)
Data Sheet: 2109
0.890" + 0.003"
(22.6mm + 0.08mm)
1.312" + 0.003"
(33.3mm + 0.08mm)
Panel Mount Hole Dimensions
Data Sheet: 2140
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
287
Fuse
Holders
& Blocks
Agency Information: CE, UL
Recognized, Guide IZLT2, File E14853;
CSA Certified, Class 6225-01, File
47235.
Flammability Rating: UL 94HB.
Specifications
Description: Fuse holder with
screw-type knob for 13⁄32" x 11⁄2" fuses.
Supplied with O-ring and panel gasket.
Dimensions: See Dimensions
illustration.
Ratings:
Volts: — 600Vac/dc
Amps: — 30A1
Fuse Holders and Blocks
Fuse Blocks for 1⁄4" x 1 1⁄4" Fuses
Series 8000
Single-Pole Fuse Blocks
Specifications
Description: Bolt-in and snap-in mounting for 1⁄4" x 11⁄4"
fuses.
Construction: Blocks are molded flame retarded
thermoplastic. Clips are spring-bronze.
Ratings:
Volts: — 300V
Amps: — 25A (See Catalog Numbers table)
Agency Information: CE, UL Recognized ; File E14853,
Guide IZLT2, CSA Certified Class 6225-01, File 47235.
Anti-Rotation Pin: Single-pole blocks may be ordered
without the anti-rotational pin simply by adding an “X” to the
number of poles (Example: BK/S-8000-1X).
Carton Quantity: 10; shelf package: 100.
Bulk Carton: Single-pole and 2-pole fuse blocks – 1,000;
Multiple-pole fuse blocks – 3- to 8-pole: 200; 9- to 12-pole:
50. When ordering bulk quantities, prefix “BK/” to catalog
number: (Example: BK/S-8001-1-SNP).
Catalog Numbers
Bolt-in Mounting
Basic
Catalog
Numbers
S-8001S-8002S-8101S-8102S-8201S-8202S-8203S-8301Snap-in Mounting
Catalog
Numbers
S-8001-1-SNP
S-8002-1-SNP
S-8101-1-SNP
S-8102-1-SNP
S-8201-1-SNP
S-8203-1-SNP
Series
8000
8000
Terminal
Solder
8100
8100
⁄16" Quick
Connect
1
⁄4" Quick
Connect
Side
Screw
3
8200
8200
8300
8300
Series
8000
8000
8100
8100
8200
8200
Terminal
Solder
⁄16" Quick
Connect
1
⁄4" Quick
Connect
3
Catalog Number Build-A-Code
Angle
0°
40°
0°
40°
0°
40°
—
Angle
0°
40°
0°
40°
0°
Side
Ag ency
Maximums
UL 25A
CSA 21A
UL 20A
CSA 13A
UL 20A
CSA 16A
Poles
(Suffix)
1 - 12
4405 -
0° Solder terminals
with integral terminal and clip
Dimensions - in (mm)
2.31"
(58.7mm)
0.69"
(17.5mm)
0.27"
(6.7mm)
1.63"
(41.3mm)
4406 -
Side solder terminal
4574 -
Spare fuse block
Dimensions - in (mm)
1 - 12
1.63"
(41.3mm)
0.69"
UL 30A
CSA 25A
(17.5mm)
Ag ency
Maximums
UL 25A
CSA 21A
UL 20A
CSA 13A
UL 20A
CSA 16A
Catalog Code
BK/ S-8 0
Specifications
Description: Single-pole fuse block for 1⁄4" x 11⁄4"
(6.4 x 31.8mm) size fuses.
Dimensions: See Dimensions illustrations.
Construction: Bakelite base width 1⁄2" (12.7mm); springbronze, bright tin-lead plate clips.
Ratings:
Volts: — 250V
Amps: — 30A
Poles
(Suffix)
Available
Available
only in
only in
single
single
pole
pole
00
-00
0.27"
(6.7mm)
2499 -
Dimensions - in (mm)
Prefix for
Bulk
Packing
Series 8000
Product Line
Type Terminal
“0”-Solder
“1”-‹/¡§∑ Quick Connect
“2” - ⁄/¢∑ Quick Connect
“3” - Screw
Terminal Angle
“01” - straight (0º)
“02”- 40º
“03” - side*
Number of Poles (1-12)
Data Sheet: 2101
288
Side quick-connect
Agency Information: UL
Recognized, Guide IZLT2, File
E14853
Terminals: 1⁄4" (6.4mm); 15A, 250V
1.63"
0.75"
(41.3mm)
(19.1mm)
0.27"
0.72" (6.7mm)
(18.3mm)
0.5"
(12.7mm)
Note: Mounting screw hole diameter is 0.147" (3.7mm).
Counterbore diameter, 0.636" (8.0mm). Max Mounting Screw
No. 6.
*Available only in single pole
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Fuse Holders and Blocks
Fuse Blocks for 1⁄4" x 1" Fuses
3828 Series
4520 and 4393
Specifications
Description: Fuse block for 1⁄4" x 1" (6.4 x 25.4mm) fuses
with solder terminals.
Dimensions: See Dimensions illustration.
Ratings:
Volts: — 250V
Amps: — 30A
Mounting: Mounting screw hole diameter is 0.147"
(3.7mm), diameter. Max mounting screw No. 6.
Specifications
Description: Single-pole fuse block for 1⁄4" x 1" fuses.
Dimensions: See Dimensions illustrations.
Construction: Bakelite with 1⁄2" (12.7mm) width base.
Spring-bronze, bright tin-lead plated clips.
Ratings:
Volts: — 250V
Amps: — 30A
Mounting: Mounting screw hole diameter is 0.147"
(3.7mm), counterbore 0.636" (8.0mm) diameter. Max
mounting screw No. 6.
Catalog Numbers
Poles
1
2
3
4
5
6
7
8
10
12
*Base Length - in (mm)
⁄2 (12.7)
1 1⁄8 (28.6)
1 3⁄4 (44.5)
2 3⁄8 (60.3)
3 (76.2)
3 5⁄8 (92.1)
4 1⁄4 (108.0)
4 7⁄8 (123.8)
6 1⁄8 (155.6)
7 3⁄8 (187.3)
1
*Small phenolic base, base width 1 3⁄8" (34.9mm)
Catalog Numbers
Catalog
Numbers
4520
4393
Description
Integral clip and straight solder terminals
Spare fuse block
Fuse
Holders
& Blocks
Catalog Numbers
3828-1
3828-2
3828-3
3828-4
3828-5
3828-6
3828-7
3828-8
3828-10
3828-12
No. 4520 - Integral clip and straight solder
terminals
Dimensions - in (mm)
Dimensions - in (mm)
1.88"
(47.6mm)
1.94"
(49.2mm)
0.63"
.188"
.598" (4.8mm)
(15.9mm)
(15.2mm)
0.19"
1.38"
(4.8mm)
(34.9mm)
1.38"
(34.9mm)
No. 4393 -
Spare fuse block
Dimensions - in (mm)
1.38"
(34.9mm)
0.188"
0.598" (4.8mm)
(15.2mm)
Data Sheet: 2050
Data Sheet: 2051
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
289
Fuse Holders and Blocks
Blocks for 13⁄32" X 11⁄2" Fuses
3743
3835 Series
4421 and 4515
Specifications
Specifications
Description: Add-on fuse blocks for
13
⁄32" X 1 1⁄2" (10.3 X 38.1mm) fuses.
Single pole blocks lock into each other
and can be added at any time. Each
has a single end barrier.
Dimensions: See Dimensions
illustration.
Ratings:
Volts: — 600Vac/dc
Amps: — 30A
Agency Information: CE, UL
Recognized Guide IZLT2, File E14853.
Description: Multiple pole fuse blocks
for 13⁄32" X 1 1⁄2" (10.3 X 38.1mm) fuses.
Dimensions: See Dimensions
illustration.
Ratings:
Volts: — 250Vac/dc
Amps: — 30A
Agency Information: CE
Catalog Numbers
Catalog
Numbers
3835-1
3835-2
3835-3
3835-4
3835-5
3835-6
3835-7
3835-8
3835-9
3835-10
3835-12
Poles
1
2
3
4
5
6
7
8
9
10
12
Base* Width
In (mm)
27
⁄32 (21.4)
1 13⁄16 (46.0)
2 25⁄32 (70.6)
3 3⁄4 (95.2)
4 23⁄32 (119.9)
5 11⁄16 (144.5)
6 21⁄32 (169.0)
7 5⁄8 (193.7)
8 19⁄32 (218.8)
9 9⁄16 (242.9)
11 1⁄2 (292.1)
*Base length: 2 3⁄4" (69.9mm)
0.84"
1.29"
Specifications
Description: Single pole fuse blocks
for 13⁄32" X 1 1⁄2" (10.3 X 38.1mm) fuses.
Dimensions: See Dimensions
illustration.
Ratings:
Volts: — 250Vac/dc (or less)
Amps: — 30A
Agency Information: CE
2.5"
(63.5mm)
0.897"
0.19"
(22.78mm)(4.8mm)
Dimensions
1.63"
(41.3mm)
2.75"
0.500"
(69.9mm)
4421—Solder Terminals
3742
2.56"
1.0"
1.125"
0.25"
(25.4mm) (6.4mm)
Base width 5⁄8" (15.9mm)
0.25"
2.56"
(65.1mm)
3742—End Barrier Only
2.56"
Note: Mounting screw hole diameter is
0.148" (3.7mm). Countersink, 0.313"
(7.9mm). Max. mounting screw No. 6.
0.323"
(65.1mm)
(8.2mm)
0.897"
0.19"
(22.78mm) (4.8mm)
0.25"
1.125"
(6.4mm)
(28.6mm)
0.78"
(19.8mm)
4515—Screw Terminals
0.144"
1.34"
(34.1mm)
3723—Block and end barrier
marking strip. Length is 93⁄8"
Base width 3⁄4" (19mm)
Note: Mounting screw hole diameter is
0.147" (3.7mm). Countersink, 0.312"
(7.9mm). Max. mounting screw No. 6.
(23.8cm).
Note: Mounting screw hole is 0.147"
(3.7mm) dia. Counterbore, 0.636"
(8mm) dia. Max. mounting screw No. 6.
Data Sheet: 2104
290
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
Fuse Holders and Blocks
Rail Mount Fuse Blocks and Holders
NDNF1-WH
NDNLFD1-WH
Specifications
Specifications
Description: Fuse holding rail
mount terminal block.
Circuit Jumper: JF1,
2 circuits
Fuse Size: 13⁄32" X 11⁄2"*
(KTK, FNQ).
Poles: 1
Wire Range: AWG #8-22 Cu.
Ratings:
Volts: — 600V
Amps: — 30A
Mounting Options: 35mm DIN rail, C-rail
Fuse Pullers: • PF1 (standard)
• neon or incandescent bulb
Description: Rail mount
fuse holder.
Circuit Jumper: JF1,
2 circuits.
Fuse Size: 1⁄4" X 11⁄4"
(Cooper Bussmann AGC,
MDL or equivalent).
Poles: 1
Wire Range: AWG #8-22 Cu.
Ratings:
Volts: — 600V
Amps: — 30A (NDND1 non-fused)
— 15A (NDNFD1, 600V/CSA, fused)
— 15A (NDNLFD1*fused, indicating)
*LPF1 (lighted neon or incandescent bulb).
Torque Rating: 18 lb-in
Operating Temperature: 105°C
Agency Information: CSA File 15364
Catalog Numbers
Catalog
Color
White
Agency Information: CE, UL E62622; CSA LR15364.
Mounting Options: 35mm DIN rail, C-rail
Marking Tape: MT12-1-2
Torque Rating: 18 lb-in
Operating Temperature: 105°C
Agency Information: CSA File 15364
Catalog Numbers
Fuse Pullers (Optional): PF1
Lighted neon or incandescent lamp:
Catalog
Number
Color
Indicator
Catalog
NDNFD1-WH
White
NO
NDNLFD1-WH
White
90Vdc-600Vdc
115Vac-600Vac
NDNLFD1-WH 24
White
24V
Numbers
Voltage
LPF1-24
24
LPF1-120
120
LPF1-120-C
120
LPF1-220
220
LPF1-440
440
Fuse
Holders
& Blocks
Number
NDNF1-WH
*WH24 - 24V White, WH-90Vdc-600Vdc, 115Vac-600Vac White
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
291
292