CCLD-054X-20-622.080 LVDS Clock Oscillator 5×7mm SMD, 3.3V Model CCLD-054X is a 622.080 MHz LVDS Clock Oscillator operating at 3.3Volts. Enable/Disable function used for system testing is offered as a standard feature. Operating Temperature is from -40°C to +85°C with ±20ppm Frequency Stability. Applications: 5×7mm SMD Digital Video SONET/SDH/DWDM Storage Area Networks Broadband Access Ethernet, Gigabit Ethernet Rev: F Date: 07-May-12 Page 1 of 3 CRYSTEK CORPORATION 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com CCLD-054X-20-622.080 LVDS Clock Oscillator 5×7mm SMD, 3.3V Performance Specification MIN TYP Nominal Frequency: MAX 622.080 Frequency Stability: -20 UNITS MHz +20 ppm Output Phase Noise: @1kHz Offset -100 dBc/Hz @10kHz Offset -125 dBc/Hz @100kHz Offset -138 dBc/Hz @1MHz Offset -140 dBc/Hz @10MHz Offset -142 Jitter: 12kHz-20MHz Differential Clock Rise Time: 0.2 Differential Clock Fall Time: 0.2 Output High Voltage, VOH: Output Low Voltage, VOL: Differential Output: Differential Output Error: Differential Output Skew: Output Leakage Current: Output Load (differential): Enable High Voltage, VIH: Disable Low Voltage, VIL: Output Enable/Disable Time: Duty Cycle @ 1.25V(LVDS): Offset Voltage: Offset Error: Supply Voltage: Supply Current, Icc Enabled: Supply Current, Icc Disabled: Operating Temperature: Storage Temperature: dBc/Hz 2 pS, RMS 0.7 nSec 0.5 0.7 nSec 1.40 1.60 V 454 mVOD 50 mV 200 pSec +10 µA 0.5 0.90 1.10 247 330 -10 V 100 Parameter Ω 0.7×Vcc Vcc V GND 0.3×Vcc V 400 nSec 45 50 55 % 1.125 1.2 1.375 V 0 3 25 V 3.15 3.3 3.45 V 80 mA 10 µA -40 +85 °C -45 +90 °C Conditions Mechanical Shock MIL-STD-883, Method 2002 Mechanical Vibration MIL-STD-883, Method 2007 Solderability MIL-STD-883, Method 2003 Resistance to Solvents MIL-STD-883, Method 2016 Rev: F Date: 07-May-12 Page 2 of 3 CRYSTEK CORPORATION 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com CCLD-054X-20-622.080 LVDS Clock Oscillator 5×7mm SMD, 3.3V 0.274 ±0.007 (6.96 ±0.18) Dimensions inches (mm) All dimensions are Max unless otherwise specified. CCLD054X20 622.08M DC Lot Code 0.193 ±0.007 (4.90 ±0.18) 0.045 ±0.008 (1.14 ±0.20) Denotes pad 1 SUGGESTED PAD LAYOUT via to ground 0.01µF 0.055 Typ (1.40 Typ) 0.071 SQ (1.80) 0.045 ±0.008 (1.14 ±0.20) #1 #2 #3 #6 #5 #4 PIN Connection 1 2 3 4 5 6 Enable/Disable N/C GND Output Comp Output Vcc 0.148 (3.75) 0.100 (2.54) 0.200 (5.08) 0.200 (5.08) 0.01uF Bypass Capacitor Recommended LVDS TEST CIRCUIT OUT 50Ω VOD VOS 50Ω OUT TEMPERATURE RECOMMENDED REFLOW SOLDERING PROFILE 260°C Ramp-Up 3°C/Sec Max. 217°C Critical Temperature Zone Ramp-Down 6°C/Sec. 200°C 150°C Preheat 180 Secs. Max. 8 Minutes Max. 90 Secs. Max. 260°C for 10 Secs. Max. NOTE: Reflow Profile with 240°C peak also acceptable. Rev: F Date: 07-May-12 Page 3 of 3 CRYSTEK CORPORATION 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com