CCLD-054X-20-622.080 LVDS Clock Oscillator Model CCLD-054X is a 622.080Mhz LVDS Clock Oscillator operating at 3.3Volts. Enable/Disable function used for system testing is offered as a standard feature. Operating Temperature is from -40 to +85C with +/-20PPM Frequency Stability. 5x7mm SMD Applications: Digital Video SONET/SDH/DWDM Storage Area Networks Broadband Access Ethernet, Gigabit Ethernet Rev.: B Date: 10-10-07 CCLD-054X-20-622.080 LVDS Clock Oscillator Performance Specification Nominal Frequency: Min. Frequency Stability Output Phase Noise Typ. 622.08 Max Units ±20 MHz ppm @1KHz Offset -100 dBc/Hz @100KHz Offset -138 dBc/Hz @10KHz Offset -125 @1MHz Offset -140 @10MHz Offset -142 Jitter: 12KHz-20MHz Differential Clock Rise Time 0.2 Differential Clock Fall Time 0.2 Output High Voltage, VOH Output Low Voltage, VOL 0.90 Differential Output 247 Differential Output Error Disable Low Voltage, VIL 2 0.7*VCC Output Enable/Disable Tiime Duty Cycle @ 1.25V(LVDS) 1.40 1.60 V 330 454 0.5 1.10 0.7 50 100 ±10 VCC 50 400 55 1.125 1.2 1.375 Supply Voltage 3.15 3.3 3.45 Supply Current, Icc Enabled Supply Current, Icc Disabled Operating Temp. Storage Temp. Parameter Mechanical Shock Mechanical Vibration Solderability Resistance to Solvents 0 -40 -45 nSec V VOD mV pSec uA Ohms V 0.3*VCC V Offset Voltage Offset Error pS,RMS nSec GND 45 dBc/Hz 0.7 200 Output Leakage Current Enable High Voltage, VIH dBc/Hz 0.5 Differential Output Skew Output Load (differential) dBc/Hz 3 25 80 10 +85 +90 nSec % V V V mA uA °C °C Conditions MIL-STD-883, Method 2002 MIL-STD-883, Method 2007 MIL-STD-883, Method 2003 MIL-STD-883, Method 2016 Rev.: B Date: 10-10-07 CCLD-054X-20-622.080 LVDS Clock Oscillator 0.274 ±0.007 (6.96 ±0.18) CCLD054X20 622.08M DC Lot Code 0.193 ±0.007 (4.90 ±0.18) 0.045 ±0.008 (1.14 ±0.20) SUGGESTED PAD LAYOUT Denotes pad 1 0.050 (1.27) via to ground 0.055 Typ (1.40 Typ) 0.01µF 0.045 ±0.008 (1.14 ±0.20) #1 #2 #3 #6 #5 #4 6 5 4 0.154 (3.91) 0.071 (1.80) 0.100 (2.54) 0.200 (5.08) 1 2 Pad 1 Connection Enable/Disable 2 N/C 3 GND 4 Out 5 Comp. Out 6 VCC 3 0.100 (2.54) 0.200 (5.08) LVDS Test Circuit RECOMMENDED REFLOW SOLDERING PROFILE OUT Ramp-Up 3°C/Sec Max. TEMPERATURE 260°C 217°C 50ȍ Critical Temperature Zone Ramp-Down 6°C/Sec. 200°C VOD VOS 50ȍ OUT 150°C Preheat 180 Secs. Max. 8 Minutes Max. 90 Secs. Max. 260°C for 10 Secs. Max. NOTE: Reflow Profile with 240°C peak also acceptable. Rev.: B Date: 10-10-07