Type 716P, Orange Drop®, Polypropylene Film/Foil Capacitors High Performance Features • Copper leads. • Extremely low dissipation factor. • Superb high frequency response. • Excellent stability, virtually linear temperature coefficient. • Various lead spacings, crimp styles and lead lengths available. Insulation Resistance: 400,000 M⍀ minimum at +25°C 20,000 M⍀ minimum at +85°C 2,000 M⍀ minimum at +105°C Pulse Rise Time, dV/dt: Specifications Capacitance Range: 220 pF to 1.0 µF Capacitance Tolerance: ±3% to ±10% See tabulated data. Corona Start Voltage (typical): See tabulated data. Encapsulation: Conformal coating of flame retardant orange epoxy (meets UL94V-0 specifications) Voltage Ratings: 100 to 2000 Volts D-C 70 to 500 Volts A-C Operating Temperature Range: -55°C to +85°C (+105°C with proper voltage derating) Dielectric: Polypropylene film. Construction: Non-inductively wound with extended foil. Additional details on general specifications page. Lead Wire: Tinned copper. Dissipation Factor: See tabulated data. Applications: Switching and high voltage power supplies, inverters, snubbers, resonant converters and electronic lighting ballasts. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 716P, Orange Drop®, Polypropylene Film/Foil Capacitors High Performance General Specifications The 715P and 716P series are manufactured with polypropylene film and extended foil. Polypropylene has a very low dissipation factor, low dielectric absorption and exhibits excellent capacitance stability. These characteristics combined with the direct connection of the lead wire to the extended foil electrode makes the 715P and 716P series ideal for high current, high pulse applications. The 715P series has a round profile and is available in tolerances as close as ±1%. The 716P series has a pressed profile and, in addition, is designed with copper leads, thus adding to it's performance in high frequency, high pulse current applications. Other specifications are listed below and on the following pages. Operating Temperature Range: Humidity Testing: The standard operating temperature range for polypropylene film is -55°C to +85°C. The 715P and 716P may be operated up to +105°C provided the DC working voltage is reduced by 50%. Units subjected to 95% relative humidity for 72 hours with no voltage applied at +75°C. After 4 hours of drying minimum product of insulation resistance and capacitance shall be 50,000 megohmmicrofarads. For specific derating of the AC voltage when operating above +85°C please contact our design engineering department. DC Voltage Life Test: The maximum operating temperature for 715P and 716P polypropylene film capacitors is + 105°C. Minimum of 500 hours at +85°C at 150% of rated voltage. After test, capacitance shall not have changed by more than 3%, insulation resistance shall not have decreased by more than 25% and dissipation factor shall not have changed by more than 0.03%. Measurements made at 1 KHz. Dielectric Withstanding Voltage: Units rated below 800 VDC shall withstand a DC potential of 250% of rated voltage applied between terminals for not more than 5 seconds; units rated 800 VDC and above shall withstand 200% of rated voltage. Construction: Units rated 100 through 600 VDC are single section designs constructed of plain polypropylene film with extended foil. Units rated 800 VDC and above are series-section designs with extended foil and incorporate a floating common of metallized polypropylene. All units are noninductively wound. Temperature Coefficient: The typical temperature coefficient is -180 ppm/°C over the temperature range of -55°C to +85°C. AC Voltage Life Test: Minimum of 500 hours at +85°C at 60 Hz. AC test voltage applied at 110% of AC rating. After test, capacitance shall not have changed by more than 3%, insulation resistance shall not have decreased by more than 25%, and dissipation factor shall not have changed by more than 0.03%. Measurements made at 1 KHz. Additional notes on Life Testing: CDE performs standard 500 hour accelerated life tests, both DC and line frequency AC, to monitor process control over our wide range of products. We also perform longer term life testing, typically 2000 hours, during development of most products. In addition we do accelerated life testing at 10-250 KHz for our High Performance AC products. For additional life test information please contact us. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 7 16 P, Orange Drop®, Polypropylene Film/Foil Capacitors High Performance Ordering/Part Number Information 715P 222 6 5 J D 3 (XXXX) A suffix may be added by the factory to denote special construction. Lead Length 1 = 0.187 (4.7) ±0.030 (0.8) 2 = 0.250 (6.4) ±0.030 (0.8) 3 = 1.250 (32.0) Minimum (Other lead lengths available) Terminal A = Straight Lead (1.25 Min. lead length) B,F = Hairpin Crimp C = Captive Crimp 1 D,G,H = Hockey Stick Crimp Case Code See Standard Sizes/Ratings Table D-C Voltage Rating Expressed in Hundreds of Volts Capacitance Tolerance 9 = ±10%; 5 = ±5%; 3 = ±3%; 2 = ±2%; 1 = ±1% Capacitance Expressed in Picofarads. The first two digits are the significant figures, the third is the number of zeros following. (i.e. 222 = 2200 pF = .0022 µF) CDE Type Number 1 Identifies the basic capacitor design. 715P Round profile, 716P Pressed profile Terminal C has a fixed lead length of 0.156 (4.0) ±0.020 (0.5), therefore it is not necessary to indicate the lead length digit when ordering. Available for "L" case code parts only Please note; While it is not possible to list every capacitance value, tolerance, or design/size variation available, our flexibility in design and manufacturing gives us the ability to quickly, and cost effectively, provide you with the capacitor you require. Please contact us today with your specific needs! Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 7 16 P, Orange Drop¥, Polypropylene Film/Foil Capacitors High Performance Standard Lead Styles TERMINAL B,F TERMINAL A TERMINAL D,G,H TERMINAL C Standard Lead Spacings CASE CODE Term. A Term. B N J K L M 0.394 (10) 0.500 (12.7) 0.688 (17.5) 1.031 (26.2) 1.406 (35.7) 0.394 (10) S, inches (metric, mm in parentheses) 0.500 0.688 0.969 1.344 Term. D (12.7) (17.5) (24.6) (34.1) Term. C * ------0.375 (9.5) --0.375 (9.5) 0.719 (18.3) 0.886 (22.5) --1.094 (27.8) Term. F 0.295 (7.5) 0.394 (10) 0.590 (15) 0.886 (22.5) --- Term. H Term. G --0.197 (5) 0.197 (5) 0.295 (7.5) 0.295 (7.5) 0.394 (10) --0.590 (15) --1.083 (27.5) * Terminal C is designed for printed circuit boards requiring a lead spacing of 0.886 (22.5) with board hole sizes of 0.044 (1.1) to 0.048 (1.2) in diameter. Available for "L" case code parts only. Please consult us if you have a specific requirement. Standard Marking Format Sample Marking on unit CDE716P600V 222J 9810 Description CDE 716P 600V 222J 9810 CDE Electronics identification Type number D-C Voltage rating, Volts Capacitance and tolerance code Weekly date code (i.e. 10th week of 1998) Tolerance codes per EIA Standards H J K ±3% ±5% ±10% CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 7 16 P, Orange Drop¥, Polypropylene Film/Foil Capacitors High Performance Type 716P Standard Sizes/Ratings2 Value Part Number1 L max µF T max H max d Value Part Number1 L max µF 100 VDC / 70 VAC* .36 (9.1) .37 (9.4) .38 (9.7) .37 (9.4) .39 (9.9) .42 (10.7) .032 .032 .032 .032 .032 .032 .57 (14.5) .57 (14.5) .57 (14.5) .57 (14.5) .57 (14.5) .57 (14.5) .28 (7.1) .29 (7 4) .27 (6.9) .29 (7 4) .31 (7.9) .34 (8.6) .44 (11.2) .45 (11.4) .50 (12.7) .53 (13.5) .55 (14.0) .58 (14.7) .032 (0.8) .032 (0:8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) 716P50391J 716P56391J 716P62391J 716P68391J 716P75391J 716P82391J 716P90391J 716P10491J .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .28 (7 1) .29 (7 4) .31 (7.9) .32 (8.1) .33 (8.4) .35 (8.9) .36 (9.1) .38 (9.7) .52 (13.2) .53 (13.5) .54 (13.7) .56 (14.2) .57 (14.5) .59 (15.0) .60 (15.2) .62 (15.7) .032 .032 .032 .032 .032 .032 .032 .032 .12 .15 .18 .20 .22 .25 .27 716P12491K 716P15491K 716P18491K 716P20491K 716P22491K 716P25491K 716P27491K .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .33 (8.4) .37 (9.4) .40 (10.2) .42 (10.7) .44 (11.2) .47 (11.9) .49 (12.4) .57 (14.5) .61 (15.5) .64 (16.3) .66 (16.8) .68 (17.3) .71 (18.0) .73 (18.5) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .30 .33 716P30491L 716P33491L 1.25 (31.8) 1.25 (31.8) .41 (10.4) .65 (16.5) .040 (1.0) .42 (10.7) .67 (17.0) .040 (1.0) .01 .012 .015 .018 .022 716P10392J 716P12392J 716P15392J 716P18392J 716P22392J .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .25 (6.4) .27 (6.9) .26 (6.6) .25 (6.4) .27 (6.9) .37 (9.4) .39 (9.9) .45 (11.4) .45 (11.4) .46 (11.7) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .027 .033 .039 .047 716P27392J 716P33392J 716P39392J 716P47392J .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .29 (7 4) .32 (8.1) .32 (8.1) .34 (8.6) .48 (12.2) .51 (13.0) .56 (14.2) .58 (14.7) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .056 .068 .082 .1 .12 .15 716P56392K 716P68392K 716P82392K 716P10492K 716P12492K 716P15492K .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9 .90 (22.9) .30 (7.6) .33 (8.4) .36 (9.1) .39 (9.9) .40 (10.2) .45 (11.4) .55 (14.0) .57 (14.5) .60 (15.2) .63 (16.0) .69 (17.5) .73 (18.5) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) 716P82291N 716P90291N 716P10391N 716P12391N 716P15391N 716P18391N .57 .57 .57 .57 .57 .57 .022 .025 .027 .033 .039 .047 716P22391N 716P25391N 716P27391N 716P33391N 716P39391N 716P47391N .05 .056 .062 .068 .075 .082 .09 .1 (14.5) (14.5) (14.5) (14.5) (14.5) (14.5) .23 .24 .24 .23 .25 .26 d H max 200 VDC / 155 VAC* (5.8) (6.1) (6.1) (5.8) (6.4) (6.6) .0082 .009 .01 .012 .015 .018 T max (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) 200 VDC / 155 VAC* .18 .22 .27 .33 .39 .47 .56 716P18492L 716P22492L 716P27492L 716P33492L 716P39492L 716P47492L 716P56492L 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) .68 .82 1.0 716P68492M 1.65 (41.9) 716P82492M 1.65 (41.9) 716P10592M 1.65 (41.9) .001 .0012 .0015 .0018 .0022 .0027 .0033 716P10294J 716P12294J 716P15294J 716P18294J 716P22294J 716P27294J 716P33294J .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .25 (6.4) .22 (5.6) .24 (6.1) .25 (6.4) .26 (6.6) .24 (6.1) .24 (6.1) .47 (11.9) .44 (11.2) .45 (11.4) .46 (11.7) .48 (12.2) .45 (11.4) .45 (11.4) .032 .032 .032 .032 .032 .032 .032 (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) .0039 .0047 .0056 .0068 .0082 .01 .012 .015 716P39294J .70 (17.8) 716P47294J .70 (17.8) 716P56294J .70 (17.8) 716P68294J .70 (17.8) 716P82294J .70 (17.8) 716P10394J .70 (17.8) 716P12394J .70 (17.8) 716P15394J .70 (17.8) .24 (6.1) .25 (6.4) .24 (6.1) .24 (6.1) .25 (6.4) .27 (6.9) .29 (7.4) .31 (7.9) .36 (9.1) .37 (9.4) .44 (11.2) .44 (11.2) .45 (11.4) .46 (11.7) .48 (12.2) .50 (12.7) .032 .032 .032 .032 .032 .032 .032 .032 (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) .018 .022 .027 .033 .039 .047 .056 .068 716P18394K 716P22394K 716P27394K 716P33394K 716P39394K 716P47394K 716P56394K 716P68394K .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .28 (7.1) .30 (7.6) .31 (7.9) .33 (8.4) .36 (9.1) .39 (9.9) .40 (10.2) .43 (10.9) .47 (11.9) .49 (12.4) .55 (14.0) .57 (14.5) .60 (15.2) .62 (15.7) .68 (17.3) .72 (18.3) .032 .032 .032 .032 .032 .032 .032 .032 (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) .082 .1 .12 .15 .18 .22 .27 716P82394L 716P10494L 716P12494L 716P15494L 716P18494L 716P22494L 716P27494L 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) .38 (9.7) .42 (10.7) .45 (11.4) .46 (11.7) .50 (12.7) .57 (14.5) .63 (16.0) .67 (17.0) .70 (17.8) .73 (18.5) .84 (21.3) .89 (22.6) .95 (24.1) 1.01 (25.7) .040 .040 .040 .040 .040 .040 .040 (1.0) (1.0) (1.0) (1.0) (1.0) (1.0) (1.0) .33 .39 .47 716P33494M 1.65 (41.9) 716P39494M 1.65 (41.9) 716P47494M 1.65 (41.9) .39 (9.9) .43 (10.9) .47 (11.9) .47 (11.9) .51 (13.0) .56 (14.2) .61 (15.5) .67 (17.0) .71 (18.0) .75 (19.1) .86 (21.8) .90 (22.9) .95 (24.1) 1.00 (25.4) .040 .040 .040 .040 .040 .040 .040 (1.0) (1.0) (1.0) (1.0) (1.0) (1.0) (1.0) .56 (14.2) .94 (23.9) .040 (1.0) .61 (15.5) 1.00 (25.4) .040 (1.0) .68 (17.3) 1.07 (27.2) .040 (1.0) 400 VDC / 200 VAC* .57 (14.5) .96 (24.4) .040 (1.0) .62 (15.7) 1.01 (25.7) .040 (1.0) .68 (17.3) 1.07 (27.2) .040 (1.0) * Please refer to performance curves for RMS Voltage vs. Frequency characteristics. To complete part number for proper tolerance, terminal style and lead length please refer to Ordering/Part Number Information page. 2 Type 716P capacitors are available through the CDE Distribution Network on special order. 1 Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 7 16 P, Orange Drop¥, Polypropylene Film/Foil Capacitors High Performance Type 716P Standard Sizes/Ratings2 Value Part 1 Number L max µF T max H max d Value Part 1 Number L max µF 600 VDC / 200 VAC* .001 .0012 .0015 .0018 .0022 .0027 .0033 .0039 .0047 .0056 .0068 .0082 .01 716P10296J .70 (17.8) 716P12296J .70 (17.8) 716P15296J .70 (17.8) 716P18296J .70 (17.8) 716P22296J .70 (17.8) 716P27296J .70 (17.8) 716P33296J .70 (17.8) 716P39296J .70 (17.8) 716P47296J .70 (17.8) 716P56296J .70 (17.8) 716P68296J .70 (17.8) 716P82296J .70 (17.8) 716P10396J .70 (17.8) .46 (11.7) .44 (11.2) .45 (11.4) .46 (11.7) .48 (12.2) .44 (11.2) .45 (11.4) .46 (11.7) .47 (11.9) .49 (12.4) .51 (13.0) .56 (14.2) .58 (14.7) .012 .015 .018 .022 .027 .033 .039 716P12396K 716P15396K 716P18396K 716P22396K 716P27396K 716P33396K 716P39396K .31 (7.9) .34 (8.6) .36 (9.1) .39 (9.9) .41 (10.4) .44 (11.2) .48 (12.2) .55 (14.0) .58 (14.7) .60 (15.2) .63 (16.0) .69 (17.5) .73 (18.5) .76 (19.3) .047 .056 .068 .082 .1 .12 716P47396L 1.25 (31.8) .42 (10.7) .70 (17.8) 716P56396L 1.25 (31.8) .45 (11.4) .73 (18.5) 716P68396L 1.25 (31.8) .45 (11.4) .84 (21.3) 716P82396L 1.25 (31.8) .49 (12.4) .88 (22.4) 716P10496L 1.25 (31.8) .54 (13.7) .93 (23.6) 716P12496L 1.25 (31.8) .59 (15.0) .97 (24.6) d H max 1000 VDC / 450 VAC* .0056 .0068 .0082 .01 .012 716P562910L 716P682910L 716P822910L 716P103910L 716P123910L 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) .25 (6.4) .27 (6.9) .29 (7.4) .29 (7.4) .31 (7.9) .45 (11.4) .46 (11.7) .48 (12.2) .53 (13.5) .55 (14.0) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .015 .018 .022 .027 716P153910L 716P183910L 716P223910L 716P273910L 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) .34 (8.6) .37 (9.4) .38 (9.7) .42 (10.7) .58 (14.7) .61 (15.5) .67 (17.0) .70 (17.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .033 .039 .047 .032 (0.8) .056 .032 (0.8) .068 .032 (0.8) .032 (0.8) .082 .032 (0.8) .1 .032 (0.8) .12 .032 (0.8) .14 716P333910L 716P393910L 716P473910L 716P563910L 716P683910L 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) .46 (11.7) .46 (11.7) .50 (12.7) .54 (13.7) .59 (15.0) .74 (18.8) .84 (21.3) .88 (22.4) .93 (23.6) .98 (24.9) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) 716P823910M 716P104910M 716P124910M 716P144910M 1.65 (41.9) 1.65 (41.9) 1.65 (41.9) 1.65 (41.9) .52 (13.2) .57 (14.5) .62 (15.7) .67 (17.0) .90 (22.9) .96 (24.4) 1.01 (25.7) 1.06 (27.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) 716P102912L 716P122912L 716P152912L 716P182912L 716P222912L 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) .23 (5.8) .24 (6.1) .25 (6.4) .27 (6.9) .29 (7.4) .45 (11.4) .46 (11.7) .47 (11.9) .49 (12.4) .51 (13.0) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .15 .18 .22 .040 (1.0) .0027 716P272912L 716P15496M 1.65 (41.9) .55 (14.0) .93 (23.6) .040 (1.0) .0033 716P332912L 716P18496M 1.65 (41.9) .59 (15.0) .98 (24.9) 716P22496M 1.65 (41.9) .65 (16.5) 1.04 (25.7) .040 (1.0) .0039 716P392912L .0047 716P472912L 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) .28 (7.1) .30 (7.6) .30 (7.6) .32 (8.1) .48 .49 .54 .56 (12.2) (12.4) (13.7) (14.2) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .0056 .0068 .0082 .01 .012 .015 .018 .022 .027 .033 .039 .047 .056 .068 716P56298L 716P68298L 716P82298L 716P10398L 716P12398L 716P15398L 716P18398L 716P22398L 716P27398L 716P33398L 716P39398L 716P47398L 716P56398L 716P68398L 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) .25 (6.4) .27 (6.9) .29 (7.4) .29 (7.4) .31 (7.9) .34 (8.6) .37 (9.4) .38 (9.7) .42 (10.7) .46 (11.7) .46 (11.7) .50 (12.7) .54 (13.7) .59 (15.0) .45 (11.4) .46 (11.7) .48 (12.2) .53 (13.5) .55 (14.0) .58 (14.7) .61 (15.5) .67 (17.0) .70 (17.8) .74 (18.8) .84 (21.3) .88 (22.4) .93 (23.6) .98 (24.9) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .34 (8.6) .37 (9.4) .38 (9.7) .42 (10.7) .45 (11.4) .082 .1 .12 .14 716P82398M 716P10498M 716P12498M 716P14498M 1.65 (41.9) 1.65 (41.9) 1.65 (41.9) 1.65 (41.9) .52 (13.2) .57 (14.5) .62 (15.7) .67 (17.0) .90 (22.9) .96 (24.4) 1.01 (25.7) 1.06 (27.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .27 (6.9) .24 (6.1) .26 (6.6) .27 (6.9) .28 (7.1) .25 (6.4) .25 (6.4) .26 (6.6) .28 (7.1) .30 (7.6) .32 (8.1) .32 (8.1) .34 (8.6) T max .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) 1200 VDC / 475 VAC* .001 .0012 .0015 .0018 .0022 800 VDC / 450 VAC* .0056 .0068 .0082 .01 .012 716P562912L 716P682912L 716P822912L 716P103912L 716P123912L 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) .58 .61 .67 .70 .73 (14.7) (15.5) (17.0) (17.8) (18.5) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .015 .018 .022 .027 716P153912L 716P183912L 716P223912L 716P273912L 1.25 (31.8) .46 (11.7) .84 1.25 (31.8) .50 (12.7) .88 1.25 (31.8) .54 (13.7) .93 1.25 (31.8) .60 (15.2) .99 (21.3) (22.4) (23.6) (25.1) .032 .032 .032 .032 .033 .039 .047 .056 716P333912M 716P393912M 716P473912M 716P563912M 1.65 (41.9) 1.65 (41.9) 1.65 (41.9) 1.65 (41.9) .53 (13.5) .57 (14.5) .62 (15.7) .68 (17.3) .91 (23.1) .96 (24.4) 1.01 (25.7) 1.07 (27.2) (0.8) (0.8) (0.8) (0.8) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) * Please refer to performance curves for RMS Voltage vs. Frequency characteristics. To complete part number for proper tolerance, terminal style and lead length please refer to Ordering/Part Number Information page. 2 Type 716P capacitors are available through the CDE Distribution Network on special order. 1 Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 7 16 P, Orange Drop¥, Polypropylene Film/Foil Capacitors High Performance Type 716P Standard Sizes/Ratings2 Value Part 1 Number µF L max T max H max d Value Part µF Number1 716P102916L 716P122916L 716P152916L 716P182916L 716P222916L 1.25 1.25 1.25 1.25 1.25 (31.8) .28 (7.1) (31.8) .29 (7.4) (31.8) .30 (7.6) (31.8) .31 (7.9) (31.8) .32 (8.1) .0027 .0033 .0039 .0047 716P272916L 716P332916L 716P392916L 716P472916L 1.25 1.25 1.25 1.25 (31.8) .35 (8.9) (31.8) .37 (9.4) (31.8) .38 (9.7) (31.8) .41 (10.4) .0056 .0068 .0082 .01 .012 716P562916L 716P682916L 716P822916L 716P103916L 716P123916L 1.25 1.25 1.25 1.25 1.25 (31.8) .43 (10.9) (31.8) .47 (11.9) (31.8) .47 (11.9) (31.8) .51 (13.0) (31.8) .55 (14.0) .015 .018 .022 .027 .033 716P153916M 716P183916M 716P223916M 716P273916M 716P333916M 1.65 (41.9) 1.65 (41.9) 1.65 (41.9) 1.65 (41.9) 1.65 (41.9) .49 (12.4) .53 (13.5) .58 (14.7) .63 (16.0) .69 (17.5) .001 .0012 .0015 .0018 .0022 .0027 .59 (15.0) .032 (0.8) .0033 .61 (15.5) .032 (0.8) .032 (0.8) .0039 .67 (17.0) .69 (17.5) .032 (0.8) .0047 .0056 .72 (18.3) .032 (0.8) .0068 .75 (19.1) .032 (0.8) .0082 .85 (21.6) .032 (0.8) .01 .90 (22.9) .032 (0.8) .012 .94 (23.9) .032 (0.8) .015 .87 (22.1) .040 (1.0) .018 .91 (23.1) .040 (1.0) .022 .96 (24.4) .040 (1.0) .027 1.02 (25.9) .040 (1.0) .033 1.08 (27.4) .040 (1.0) .47 (11.2) .48 (12.2) .50 (12.7) .55 (14.0) .56 (14.2) T max H max d 2000 VDC / 500 VAC* 1600 VDC / 500 VAC* .001 .0012 .0015 .0018 .0022 L max .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) 716P102920L 716P122920L 716P152920L 716P182920L 716P222920L 716P272920L 716P332920L 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) .28 (71.) .29 (7.4) .30 (7.6) .31 (7.9) .32 (8.1) .35 (8.9) .37 (9.4) .47 (11.9) .48 (12.2) .50 (12.7) .55 (14.0) .56 (14.2) .59 (15.0) .61 (15.5) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) 716P392920L 716P472920L 716P562920L 716P682920L 716P822920L 716P103920L 716P123920L 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) .38 (9.7) .41 (10.4) .43 (10.9) .47 (11.9) .47 (11.9) .51 (13.0) .55 (14.0) .67 (17.0) .69 (17.5) .72 (18.3) .75 (19.1) .85 (21.6) .90 (22.9) .94 (23.9) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) .032 (0.8) 716P153920M 716P183920M 716P223920M 716P273920M 716P333920M 1.65 (41.9) 1.65 (41.9) 1.65 (41.9) 1.65 (41.9) 1.65 (41.9) .49 (12.4) .53 (13.5) .58 (14.7) .63 (16.0) .69 (17.5) .87 (22.1) .91 (23.1) .96 (24.4) 1.02 (25.9) 1.08 (27.4) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) * Please refer to performance curves for RMS Voltage vs. Frequency characteristics. 1 2 1 To complete part number for proper tolerance, terminal style and lead length please refer to Ordering/Part Number Information page. Type 716P capacitors are available through the CDE Distribution Network on special order. Please note: It is not possible to list every capacitance value available for each rating, if you require a specific cap value not listed just give us a call. We will supply the details you need. Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 7 16 P, Orange Drop¥, Polypropylene Film/Foil Capacitors High Performance Corona, Dissipation Factor Specifications Corona Start Voltage D-C Rating Typical Corona Start Voltage, RMS 100 200 400, 600 800, 1000 1200 1600, 2000 250 300 325 600 625 650 Maximum Dissipation Factor (D.F.) in % 100V-600V 800V/1000V 1200V 1600V/2000V Range (µF) 20KHz 100KHz 20KHz 100KHz 20KHz 100KHz 20KHz 100KHz Cap .001 - .012 .015 - .027 .033 - .068 .082 - .1 .12 - .33 .39 - .56 .68 - 1.0 .028 .029 .030 .031 .034 .038 .047 .034 .038 .046 .053 .076 .107 .167 .037 .037 .038 .048 .049 --- .075 .078 .087 .135 .141 --- .034 .035 .042 ----- .064 .067 .104 ----- .032 .037 .037 ----- .053 .078 .079 ----- For additional information on Corona and Dissipation Factor please refer to the Technical Reference section of this catalog. For more specific data or assistance with a specific application just give us a call. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 716P, Orange Drop®, Polypropylene Film/Foil Capacitors High Performance dV/dt Specifications Maximum Pulse Rise Time (dv/dt) in Volts/µsec Cap Value (µF) 100V 200V 400V 600V 800V/ 1000V 1200V .001 .0012 .0015 .0018 .0022 .0027 .0033 .0039 .0047 .0056 .0068 .0082 .01 .012 .015 .018 .022 .027 .033 .039 .047 .056 .068 .082 .1 .12 .15 .18 .22 .27 .33 .39 .47 .56 .68 .82 1.0 - 4600 4200 3800 3400 3100 2800 2500 2300 2100 1800 1600 1500 1300 1200 1100 910 820 740 670 620 560 520 430 400 360 20700 18900 16900 15400 14000 12600 11400 10500 9500 8700 7900 7200 6500 6000 5300 4400 4000 3600 3200 3000 2700 2500 2300 1900 1700 1600 1400 1300 1200 1100 880 810 740 - 20700 18900 16900 15400 14000 12600 11400 10500 9500 8700 7900 7200 6500 5400 4800 4400 4000 3600 3200 3000 2500 2300 2100 1900 1700 1600 1300 1200 1100 - 16400 14900 13600 12300 11200 10000 9200 8300 7500 6800 6200 5700 5200 4700 4000 3600 3300 - 43200 39500 35300 32200 29100 25000 22600 20800 18900 17400 15700 14300 13000 11900 10600 9700 8800 7900 6600 6100 5600 5100 - - - - - 4100 3700 3400 3000 2800 2500 2200 2000 1700 1500 1400 1300 1100 1000 900 800 700 700 600 500 - 1600V/ 2000V 43200 39500 35300 32200 29100 26300 23800 21900 19900 18300 16600 15100 13700 12500 10300 9400 8500 7700 7000 - Note: dV/dt ratings based on measurements made at junction of the wire leads and capacitor body. For additional information on Pulse Rise Time (dV/dt) please refer to the Technical Reference section of this catalog. For more specific data or assistance with a specific application just give us a call. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 716P, Orange Drop®, Polypropylene Film/Foil Capacitors High Performance RMS Voltage vs. Frequency @ +85°C Voltage (RMS) 716P, 100 VDC Frequency - KHZ Voltage (RMS) Type 716P, 200 VDC Frequency (KHz) CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 716P, Orange Drop®, Polypropylene Film/Foil Capacitors High Performance RMS Voltage vs. Frequency @ +85°C Voltage (RMS) Type 716P, 400 VDC Frequency (KHz) Voltage (RMS) Type 716P, 600 VDC Frequency (KHz) CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 716P, Orange Drop®, Polypropylene Film/Foil Capacitors High Performance RMS Voltage vs. Frequency @ +85°C Voltage (RMS) Type 716P, 800/1000 VDC Frequency (KHz) Voltage (RMS) Type 716P, 1200 VDC Frequency (KHz) CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 716P, Orange Drop®, Polypropylene Film/Foil Capacitors High Performance RMS Voltage vs. Frequency @ +85°C Voltage (RMS) Type 716P, 1600/2000 VDC Frequency (KHz) CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 716P, Orange Drop®, Polypropylene Film/Foil Capacitors High Performance |Z| (ohms) |Z| (ohms) Typical Impedance vs. Frequency 400V 200V Frequency (MHz) |Z| (ohms) |Z| (ohms) Frequency (MHz) 800V/1000V 600V Frequency (MHz) 1200V |Z| (ohms) |Z| (ohms) Frequency (MHz) 1600V/2000V Frequency (MHz) Frequency (MHz) Please note: Capacitance values above are in µF. The resonant frequency and impedance shown above apply to units with a 0.250" lead length and are typical values only. Please contact us for data on the 100VDC rated units. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 AC Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. 4