Type 225P, Orange Drop®, Polyester Film/Foil Capacitors Features • Radial-lead. Pressed profile. • Non-inductively wound, extended foil construction. • Over 35 years o f proven dependability. • Wide availability through CDE Distribution. Specifications Capacitance Range: .00 to 1.0 µF Capacitance Tolerance: ±5%, ±10%, ±20% Voltage Ratings: 100 to 600 Volts D-C 70 to 200 Volts A-C Operating Temperature Range: -55°C to +85°C (at full voltage) Voltage Derating: At +105°C, 70% of +85°C rating. At +125°C, 50% of +85°C rating. Insulation Resistance: At +25°C: 100,000 M⍀ for ⭐ .25 µF 25,000 M⍀ -µF for C > .25 µF At +85°C: 10,000 M⍀ for C ⭐ .15 µF 1,500M⍀ -µF for C >.15 µF At+105°C: 1.500 M⍀ for C ⭐ .17 µF 250 M⍀ -µF for C > .17µF At +125°C: 200 M⍀ for C ⭐ .13 µF 25 M⍀ -µF for C >.13 µF Dissipation Factor: 0.75% Maximum @ 1 KHz, +25°C Encapsulation: Conformal coating of orange, flame retardant epoxy. Meets UL94V-0 specifications. Dielectric/Construction: Polyester film, single section design. Non-inductively wound with extended aluminum foil. Lead Wire: Tinned copper-clad steel, .032 (0.8) diameter, #20 AWG Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 225P, Orange Drop®, Polyester Film/Foil Capacitors General Specifications The Type 225P Orange Drop® is designed and manufactured for operation in a wide range of demanding environments and applications. Type 225P capacitors are wound from the most reliable polyester film and aluminum foil available and are protected by a rugged conformal coating of orange epoxy. They may be operated up to +125 °C with proper derating. The combination of proven dependability and extensive availability through CDE distribution make the 225P an ideal choice for many commercial and industrial electronic applications, from power supplies and instrumentation to audio amplifiers and test equipment. Operating Temperature Range: Humidity Testing: The standard operating temperature range for polyester film is -55°C to +85°C. The 225P may be operated a t full voltage within this temperature range. Units subjected to 95% relative humidity for 72 hours with no voltage applied at +75°C. After 4 hours of drying minimum product of insulation resistance and capacitance shall be 5,000 M -µF. The 225P may be operated up to +105°C provided the DC working voltage is reduced to 70% of the +85°C rating (full rating), and up to +125°C with a 50% reduction from the +85°C rating (full rating). For more specific details regarding operation above +85°C please contact our design engineering department. The maximum operating temperature for the 225P polyester film capacitors is +125°C. DC Voltage Life Test: 500 hours at +85°C at 150% of rated voltage. After test; capacitance shall not have changed by more than ±5% of initial value, insulation resistance shall not have decreased by more than 50% of initial value and dissipation factor shall not have increased to more than 1.0%. In addition, there should be no open or short circuits, and no sign of visible damage. Typical Temperature Characteristics: Dielectric Withstanding Voltage: Units shall withstand a DC potential of 250% of rated voltage applied between terminals for not more than 5 seconds. AC Voltage Applications: The A-C component of the 225P's voltage rating has been specified to assure that corona will not be encountered when the capacitor is operated within the noted specifications. We encourage you to contact us if you have any concerns about operating voltage, temperature limits, etc. Lead Bend Test: After 3 consecutive 180° bends. No damage. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 225P, Orange Drop®, Polyester Film/Foil Capacitors Ordering/Part Number information 225P 104 9 1 W D 3 (XXXX) A suffix may be added by the factory to denote special construction. Lead Length 1 = 0.187 (4.7) ± 0.030 (0.8) 2 = 0.250 (6.4) ± 0.030 (0.8) 3 = 1.250 (32) Minimum Custom lead lengths available upon request. Terminal A = Straight Lead B,F = Hairpin Crimp D,G,H = Hockey Stick Crimp Case Code See Standard Sizes/Ratings Table D-C Voltage Rating Expressed in Hundreds of Volts Capacitance Tolerance 0 = ±20%; 9 = ±10%; 5 = ±5% Capacitance Expressed in Picofarads. The first two digits are the significant figures, the third is the number of zeros following, (i.e. 104 = 100000 pF = . 1 µF) CDE Type Number Identifies the basic capacitor design. Standard Marking Format Sample Marking on unit CDE225P100V 104K 9810 Description CDE 225P 100V 104K 9810 - CDE Electronics identification Type number D-C Voltage rating, Volts Capacitance and tolerance code Weekly date code (i.e. 10th week of 1998) Tolerance codes per EIA Standards J K M ±5% ±10% ±20% CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 225P, Orange Drop®, Polyester Film/Foil Capacitors Standard Lead Styles TERMINAL A TERMINAL B,F TERMINAL D,G,H Standard Lead Spacings CASE CODE W X Y Term. A Term. B 0.562 (14.3) 0.613 (15.6) 0.969 (24.6) 0.562 (14.3) 0.613 (15.6) 0.969 (24.6) Term. D s Term. F 0.375 (9.5) 0.394 (10) 0.590 (15) 0.375 (9.5) 0.719 (18.3) 0.886 (22.5) Term. G Term. H 0.295 (7.5) 0.394 (10) 0.590 (15) 0.197 (5) 0.295 (7.5) --- Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 225P, Orange Drop®, Polyester Film/Foil Capacitors Type 225P Standard Sizes/Ratings2 1 Value, µF Part Number L MAX T MAX H MAX T MAX 200 VDC / 140 VAC* 1 Value, µF Part Number 100 VDC / 70 VAC* .001 .0012 .0015 .0018 .0022 .0027 225P10291 W 225P12291 W 225P15291 W 225P18291 W 225P22291 W 225P27291 W .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .25 (6.4) .25 (6.4) .25 (6.4) .25 (6.4) .25 (6,4) .25 (6.4) .35 .35 .35 .35 .35 .35 .0033 .0039 .0047 .0056 .0068 .0082 225P33291 W 225P39291 W 225P47291 W 225P56291 W 225P68291 W 225P82291 W .70 (17.8) .70 (17.8 ) .70 (17,8) .70 (17.8) .70 (17.8) .70 (17.8) .25 (6.4) .25 (6.4) .25 (6.4) .25 (6.4) .25 (6.4) .25 (6.4) .35 (8.9) .35 (8.9) .35 (8.9) .35 (8.9) .35 (8.9) .35 (8.9) .01 .012 .015 .018 .022 .027 225P10391 W 225P12391 W 225P15391 W 225P18391 W 225P22391W 22SP27391W .70 (17.8) .70 (17.8) .70 (17.8 ) .70 (17.8) .70 (17.8) .70 (17.8) .25 (6.4) .25 (6.4) .25 (6.4) .25 (6.4) .25 (6.4) .27 (6.9) .35 (8.9) .35 (8.9) .35 (8.9) .35 (8.9) .35 (8.9) .37 (9.4) .033 .039 .047 .056 .068 .082 .1 225P33391 W 225P39391 W 225P47391 W 225P56391 W 225P68391 W 225P82391W 225P10491 W .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .27 (6,9) .30 (7.6) .30 (7.6) .34 (8.6) .34 (8.6) .40 (10.2) .40 (10.2) .37 (9.4) .42 (10.7) .42 (10.7) .49 (12.4) .49 (12.4) .55 (14.0) .55 (14.0) .12 .15 .18 .22 .27 .33 .39 .47 225P12491X 225P15491 X 225P18491X 225P22491X 225P27491 X 225P33491 X 225P39491 X 225P47491X .80 (20.3) .80 (20.3) .80 (20.3) .80 (20.3) .80 (20.3) .80 (20.3) .80 (20.3) .80 (20.3) .37 (9.4) .40 (10.2) .43 (10.9) .46 (11.7) .49 (12.4) .52 (13.2) .55 (14.0) .60 (15.2) .57 (14.5) .62 (15.7) .66 (16.8) .70 (17.8) .74 (18.8) .77 (19.6) .81 (20.6) .86 (21.8) .56 .68 .82 1.0 225P56491Y 225P68491Y 225P82491 Y 225P10591Y 1.25 (31.8) 1.25 (31.8 ) 1.25 (31.8) 1.25 (31.8) .55 .58 .65 .72 .88 .90 .94 .98 (14.0) (14.7) (16.5) (18.3) (8.9) (8.9) (8.9) (8.9) (8.9) (8.9) (22.4) (22.9) (23.9) (24.9) L MAX H MAX .001 .0012 .0015 .0018 .0022 .0027 .0033 225P10292X 225P12292X 225P15292X 225P18292X 225P22292X 225P27292X 225P33292X .80 .80 .80 .80 .80 .80 .80 (20.3) (20.3) (20.3) (20.3) (20.3) (20.3) (20.3) .25 (6.4) .0039 .0047 .0056 .0068 .0082 .01 .012 225P39292X 225P47292X 225P56292X 225P68292X 225P82292X 225P10392X 225P12392X .80 .80 .80 .80 .80 .80 .80 (20.3) (20.3) (20.3) (20.3) (20.3) (20.3) (20.3) .25 (6.4) .25 (6.4) .25 (6.4) .25 (6.4) .25 (6.4) .25 (6.4) .25 (6.4) .55 .55 .58 .58 .58 .58 .58 .015 225P15392 X 225P18392X 225P22392X .80 (20.3) .25 (6.4) .58 (14.7) .018 .022 .027 .033 .039 .047 .056 .068 .082 .1 .12 .15 .18 .22 .27 .33 .39 .47 .56 .68 225P27392X 225P33392X 225P39392X 225P47392X 225P56392X 225P68392X 225P82392X 225P10492X 225P12492X 225P15492X 225P18492X 225P22492X 225P27492Y 225P33492Y 225P39492Y 225P47492Y 225P56492Y 225P68492Y .80 .80 .80 .80 .80 .80 (20.3) (20.3) (20.3) (20.3) (20.3) (20.3) .80 (20.3) .80 (20.3) .80 .80 .80 .80 .80 .80 (20.3) (20.3) (20.3) (20.3) (20.3) (20.3) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) .25 .25 .25 .25 .25 .25 (6.4) (6.4) (6.4) (6.4) (6.4) (6,4) .25 (6.4) .25 (6.4) .28 (7.1) .28 (7.1) .28 (7.1) .28 (7.1) .31 (7.9) .31 (7,9) .34 (8.6) .37 (9.4) .39 (9.9) .41 (10.4) .46 (11.7) .48 (12.2) .55 (14.0) .55 (14.0) .55 (14.0) .55 (14.0) .55 (14.0) .55 (14.0) .55 (14.0) .58 .58 .61 .61 .61 .61 (14.0) (14.0) (14.7) (14.7) (14.7) (14.7) (14.7) (14.7) (14.7) (15.5) (15.5) (15.5) (15.5) .64 (16.3) .64 (16.3) .67 (17.0) .71 (18.0) .72 (18.3) .74 (18.8) .75 (19.1) .77 (19.6) .39 (9.9) .41 (10.4) .71 (18.0) .50 (12.7) .67 (17.0) .84 (21.3) .83 (21.1) .99 (25.1) 1.14 (29.0) .45 (11.4) .71 (18.0) .77 (19.6) * 60 Hz.., RMS 1 To complete part number for specific tolerance, terminal style and lead length please refer to Ordering/Part Number Information page. 2 Shaded part numbers, when ordered as ±10% tolerance with the D3 terminal style and lead length, are Standard Stock items available through the CDE Distribution Network. For complete part number please add the D3 suffix to the above part numbers in accordance with the Ordering Information (i.e. 225P10491WD3). Other part numbers are available on special order. Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 225P, Orange Drop®, Polyester Film/Foil Capacitors Type 225P Standard Sizes/Ratings2 Value, µF Part Number1 L MAX H MAX Value, µF Part Number1 .25 (6.4) .25 (6.4) .25 (6.4) .25 (6.4) .25 (6,4) .55(14.0 ) .55(14.0 ) .55(14.0 ) .55(14.0 ) .55(14.0 ) .001 .0012 .0015 .0018 225P10296X 225P12296X 225P15296X 225P18296X .80 .80 .80 .80 (20.3) (20.3) (20.3) (20.3) .25 .25 .25 .25 (6.4) (6.4) (6.4) (6.4) .55 .55 .55 .55 (14.0) (14.0) (14.0) (14.0) .25 (6.4) .25 (6.4) .25 (6.4) .55(14.0 ) .0022 .0027 .0033 .0039 225P22296X 225P27296X 225P33296X 225P39296X .80 .80 .80 .80 (20.3) (20.3) (20.3) (20.3) .25 .25 .25 .25 (6.4) (6.4) (6.4) (6.4) .55 .55 .55 .55 (14.0) (14.0) (14.0) (14.0) .0047 .0056 .0068 .0082 225P47296X 225P56296X 225P68296X 225P82296X .80 .80 .80 .80 (20.3) (20.3) (20.3) (20.3) .25 .25 .25 .31 (6.4) (6.4) (6.4) (7.9) .58 .58 .58 .64 (14.7) (14.7) (14.7) (16.3) 225P10396X 225P12396X 225P15396X 225P18396X .80 .80 .80 .80 (20.3) (20.3) (20.3) (20.3) .31 .34 .34 .37 (7.9) (8.6) (8.6) (9.4) .64 .67 .67 .74 (16.3) (17.0) (17.0) (18.8) (20.3) (20.3) (20.3) (20.3) (20.3) .37 .44 .44 .50 .50 (9.4) (11.2) (11.2) (12.7) (12.7) .74 .77 .77 .83 .83 (18.8) (19.6) (19.6) (21.1) (21.1) (20.8) (20.8) (22.4) (23.1) T MAX 400 VDC / 200 VAC* .001 .0012 .0015 .0018 .0022 225P10294X 225P12294X 225P15294X 225P18294X 225P22294X .0027 .0039 .0047 .0056 225P27294X 225P33294X 225P39294X 225P47294X 225P56294X .80 (20.3) .80 (20.3) .80 (20.3) .0068 .0082 .01 .012 .015 225P68294 X 225P82294X 225P10394X 225P12394X 225P15394 X .80 (20.3) .80 (20.3) .80 (20.3) .80 (20.3) .80 (20.3) .018 .022 .027 .033 .039 225P18394X 225P22394X 225P27394X 225P33394X 225P39394X .80 (20.3) .80 (20.3) .80 (20.3) .80 (20.3) .80 (20.3) .34 (8.6) .34 (8.6) .41 (10.4) .047 .056 .068 .082 .1 225P47394X 225P56394X 225P68394 X 225P82394X 225P10494X .80 .80 .80 .80 .80 .41 (10.4) .47(11.9 ) .47(11.9 ) .12 .15 .18 .22 225P12494Y 225P15494Y 225P18494Y 225P22494Y 1.25(31.8 ) .27 .33 .39 .47 225P27494Y 225P33494Y 225P39494Y 225P47494Y .0033 .80 (20.3 ) .80 (20.3) .80 (20.3) .80 (20.3) .80 (20.3) .80 (20.3) .80 (20.3) (20.3) (20.3) (20.3) (20.3) (20.3) L MAX T MAX H MAX 600 VDC / 200 VAC* .25(6.4 ) .55(14.0 ) .55(14.0 ) .55 (14.0) .25 .25 .25 .25 (6.4) (6.4) (6.4) (6.4) .28 (7.1) .58(14.7 ) .58(14.7 ) .58 (14.7) .58 (14.7) .58(14.7 ) .31 (7.9) .31 (7.9) .58 (14.7) .01 .012 .015 .018 .65(16.5 ) .022 .027 .033 .039 .047 225P22396X 225P27396X 225P33396X 225P39396X 225P47396X .80 .80 .80 .80 .80 .056 .068 .082 .1 225P56396Y 225P68396Y 225P82396Y 225P10496Y 1.25(31.8 ) 1.25(31.8 ) 1.25(31.8 ) 1.25(31.8 ) .47 .47 .53 .56 (11.9) (11.9) (13.5) (14.2) .82 .82 .88 .91 .12 .15 .18 .22 225P12496Y 225P15496Y 225P18496Y 225P22496Y 1.25(31.8 ) 1.25(31.8 ) 1.25(31.8 ) 1.25(31.8 ) .60 .62 .70 .76 (15.2) (15.7) (17.8) (19.3) .92 (23.4) .94 (23.9) 1.02 (25.9) 1.10 (27.9) .25 (6.4) .58(14.7 ) .58(14.7 ) .65(16.5 ) .65(16.5 ) .65(16.5 ) .52(13.2 ) .80 (20.3) .80 (20.3) .82 (20.8) .84(21.3 ) 1.25(31.8 ) 1.25(31.8 ) 1.25(31.8 ) .44(11.2 ) .47(11.9 ) .52(13.2 ) .56(14.2 ) .77(19.6 ) .80 (20.3) .84(21.3 ) .89 (22.6) 1.25(31.8 ) 1.25(31.8 ) 1.25(31.8 ) 1.25(31.8 ) .69 (17.5) .91 (23.1) .50 (12.7) .72 (18.3) .75(19.1 ) .84(21.3 ) .99 (25.1) 1.10(27.9) 1.14(29.0 ) * 60 Hz., RMS 1 To complete part number for specific tolerance, terminal style and lead length please refer to Ordering/Part Number Information page. 2 Shaded part numbers, when ordered as ±10% tolerance with the D3 terminal style and lead length, are Standard Stock items available through the CDE Distribution Network. For complete part number please add the D3 suffix to the above part numbers in accordance with the Ordering Information (i.e. 225P10491WD3). Other part numbers are available on special order. Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 225P, Orange Drop®, Polyester Film/Foil Capacitors dV/dt Specifications Maximum Pulse Rise Time (dV/dt) in Volts/µsec Cap Value (µF) 100V 200V 400V 600V .001 .0012 .0015 .0018 .0022 .0027 .0033 .0039 .0047 .0056 .0068 .0082 .01 .012 .015 .018 .022 .027 .033 .039 .047 .056 .068 .082 .1 .12 .15 .18 .22 .27 .33 .39 .47 .56 .68 .82 1.0 12200 11100 9900 9100 8200 7400 6700 6200 5600 5100 4700 4200 3800 3500 3100 2900 2600 2300 2100 1900 1800 1600 1500 1300 1200 1000 900 800 700 700 600 600 500 400 400 400 300 14800 13500 12100 11100 10000 9000 8200 7500 6800 6300 5700 5200 4700 4300 3800 3500 3200 2900 2600 2400 2200 2000 1800 1600 1500 1400 1200 21000 19100 17100 15600 14100 12800 11500 10600 9700 8900 8000 7300 6600 6100 5400 4900 4500 4000 3700 3400 3100 2800 2500 2300 2100 1900 1500 1400 1300 1200 1000 1000 900 23300 21300 19000 17400 15700 14200 12800 11800 10700 9800 8900 8100 7400 6700 6000 5500 5000 4500 4100 3700 3400 3100 2800 2300 2100 1900 1700 1600 1400 1000 800 700 700 600 600 500 Note: dV/dt ratings based on measurements made at the junction of the wire leads and capacitor body. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 AC Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. 4