Type 7 16 P HV, Orange Drop®, Polypropylene Film/Foil Capacitors High Performance ® Type 716P Orange Drop High Voltage, Compact Design High Performance Polypropylene Film/Foil Capacitors Standard Lead Styles/Lead Spacings TERMINAL A TERMINAL B TERMINAL D Additional Specifications Lead Wire: Tinned Copper; #20 AWG, .032 (0.8) Construction/Dielectric: Non-inductively wound with extended foil. Series-section design with polypropylene film; utilizes a floating common of metallized polypropylene, which provides self-healing characteristics. Maximum Dissipation Factor (%): @20KHz @100KHz .032 .054 1000 VDC: 2000 VDC: .040 .029 Corona Start Voltage (typical): 1000 VDC: 600 Volts RMS 2000 VDC: 650 Volts RMS Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 7 16 P HV, Orange Drop®, Polypropylene Film/Foil Capacitors High Performance General Specifications The 715P and 716P series are manufactured with polypropylene film and extended foil. Polypropylene has a very low dissipation factor, low dielectric absorption and exhibits excellent capacitance stability. These characteristics combined with the direct connection of the lead wire to the extended foil electrode makes the 715P and 716P series ideal for high current, high pulse applications. The 715P series has a round profile and is available in tolerances as close as ±1%. The 716P series has a pressed profile and, in addition, is designed with copper leads, thus adding to it's performance in high frequency, high pulse current applications. Other specifications are listed below and on the following pages. Operating Temperature Range: Humidity Testing: The standard operating temperature range for polypropylene film is -55°C to +85°C. The 715P and 716P may be operated up to +105°C provided the DC working voltage is reduced by 50%. Units subjected to 95% relative humidity for 72 hours with no voltage applied at +75°C. After 4 hours of drying minimum product of insulation resistance and capacitance shall be 50,000 megohmmicrofarads. For specific derating of the AC voltage when operating above +85°C please contact our design engineering department. DC Voltage Life Test: The maximum operating temperature for 715P and 716P polypropylene film capacitors is + 105°C. Dielectric Withstanding Voltage: Units rated below 800 VDC shall withstand a DC potential of 250% of rated voltage applied between terminals for not more than 5 seconds; units rated 800 VDC and above shall withstand 200% of rated voltage. Construction: Units rated 100 through 600 VDC are single section designs constructed of plain polypropylene film with extended foil. Units rated 800 VDC and above are series-section designs with extended foil and incorporate a floating common of metallized polypropylene. All units are noninductively wound. Temperature Coefficient: The typical temperature coefficient is -180 ppm/°C over the temperature range of -55°C to +85°C. Minimum of 500 hours at +85°C at 150% of rated voltage. After test, capacitance shall not have changed by more than 3%, insulation resistance shall not have decreased by more than 25% and dissipation factor shall not have changed by more than 0.03%. Measurements made at 1 KHz. AC Voltage Life Test: Minimum of 500 hours at +85°C at 60 Hz. AC test voltage applied at 110% of AC rating. After test, capacitance shall not have changed by more than 3%, insulation resistance shall not have decreased by more than 25%, and dissipation factor shall not have changed by more than 0.03%. Measurements made at 1 KHz. Additional notes on Life Testing: CDE performs standard 500 hour accelerated life tests, both DC and line frequency AC, to monitor process control over our wide range of products. We also perform longer term life testing, typically 2000 hours, during development of most products. In addition we do accelerated life testing at 10-250 KHz for our High Performance AC products. For additional life test information please contact us. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 7 16 P HV, Orange Drop®, Polypropylene Film/Foil Capacitors High Performance Ordering/Part Number Information 715P 222 6 5 J D 3 (XXXX) A suffix may be added by the factory to denote special construction. Lead Length 1 = 0.187 (4.7) ±0.030 (0.8) 2 = 0.250 (6.4) ±0.030 (0.8) 3 = 1.250 (32.0) Minimum (Other lead lengths available) Terminal A = Straight Lead (1.25 Min. lead length) B,F = Hairpin Crimp C = Captive Crimp 1 D,G,H = Hockey Stick Crimp Case Code See Standard Sizes/Ratings Table D-C Voltage Rating Expressed in Hundreds of Volts Capacitance Tolerance 9 = ±10%; 5 = ±5%; 3 = ±3%; 2 = ±2%; 1 = ±1% Capacitance Expressed in Picofarads. The first two digits are the significant figures, the third is the number of zeros following. (i.e. 222 = 2200 pF = .0022 µF) CDE Type Number 1 Identifies the basic capacitor design. 715P Round profile, 716P Pressed profile Terminal C has a fixed lead length of 0.156 (4.0) ±0.020 (0.5), therefore it is not necessary to indicate the lead length digit when ordering. Available for "L" case code parts only Please note; While it is not possible to list every capacitance value, tolerance, or design/size variation available, our flexibility in design and manufacturing gives us the ability to quickly, and cost effectively, provide you with the capacitor you require. Please contact us today with your specific needs! Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 7 16 P HV, Orange Drop®, Polypropylene Film/Foil Capacitors High Performance Standard Sizes/Ratings Value (µF) Part Number 1 L MAX T MAX H MAX Max dV/dt (Volts/µsec) 1000 VDC / 450 VAC* .00082 .001 .0012 .0015 716P821910K 716P102910K 716P122910K 716P152910K .85 .85 .85 .85 (21.6) (21.6) (21.6) (21.6) .25 .25 .26 .25 (6.4) (6.4) (6.6) (6.4) .34 .36 .36 .37 (8.6) (9.1) (9.1) (9.4) 47500 43000 39300 35100 .0018 .0022 .0027 .0033 716P182910K 716P222910K 716P272910K 716P332910K .85 .85 .85 .85 (21.6) (21.6) (21.6) (21.6) .24 .25 .27 .26 (6.4) (6.6) (6.9) (6.6) .37 .38 .40 .46 (9.4) (9.7) (10.2) (11.7) 32100 29000 26200 23700 .0039 .0047 .0056 .0068 716P392910K 716P472910K 716P562910K 716P682910K .85 .85 .85 .85 (21.6) (21.6) (21.6) (21.6) .27 .29 .31 .34 (6.9) (7.4) (7.9) (8.6) .48 .50 .52 .55 (12.2) (12.7) (13.2) (14.0) 21800 19900 18200 16500 .0082 .01 .012 .015 716P822910K 716P103910K 716P123910K 716P153910K .85 .85 .85 .85 (21.6) (21.6) (21.6) (21.6) .34 .35 .38 .43 (8.6) (8.9) (9.7) (10.9) .58 .64 .67 .72 (14.7) (16.3) (17.0) (18.3) 15000 13600 12400 11100 .018 .022 .027 .033 716P183910K 716P223910K 716P273910K 716P333910K .85 .85 .85 .85 (21.6) (21.6) (21.6) (21.6) .47 .49 .55 .62 (11.9) (12.4) (14.0) (15.7) .77 .84 .90 .97 (19.6) (21.3) (22.9) (24.6) 10100 9200 8300 7500 2000 VDC / 500 VAC* .00022 .00027 .00033 .00039 716P221920K 716P271920K 716P331920K 716P391920K .85 .85 .85 .85 (21.6) (21.6) (21.6) (21.6) .25 .26 .25 .26 (6.4) (6.6) (6.4) (6.6) .38 .39 .39 .39 (9.7) (9.9) (9.9) (9.9) 102000 92100 83300 76600 .00047 .00056 .00068 .00082 716P471920K 716P561920K 716P681920K 716P821920K .85 .85 .85 .85 (21.6) (21.6) (21.6) (21.6) .26 .27 .28 .27 (6.6) (6.9) (7.1) (6.9) .39 .40 .41 .48 (9.9) (10.2) (10.4) (12.2) 69600 63900 58000 52800 .001 .0015 .0018 .0022 716P102920K 716P152920K 716P222920K .85 .85 .85 .85 (21.6) (21.6) (21.6) (21.6) .29 .33 .35 .38 (7.4) (8.4) (8.9) (9.7) .50 .54 .56 .59 (12.7) (13.7) (14.2) (15.0) 47800 39100 35700 32200 .0027 .0033 .0039 .0047 716P272920K 716P332920K 716P392920K 716P472920K .85 .85 .85 .85 (21.6) (21.6) (21.6) (21.6) .38 .39 .42 .46 (9.7) (9.9) (10.7) (11.7) .62 .68 .71 .75 (15.7) (17.3) (18.0) (19.1) 29100 26300 24200 22100 .0056 .0068 .0082 .01 716P562920K 716P682920K 716P822920K 716P103920K .85 .85 .85 .85 (21.6) (21.6) (21.6) (21.6) .47 .52 .57 .63 (11.9) (13.2) (14.5) (16.0) .82 .87 .92 .98 (20.8) (22.1) (23.4) (24.9) 20200 18300 16700 15100 716P182920K * Please refer to performance curves for RMS Voltage vs. Frequency characteristic. 1 To complete part number for proper tolerance, terminal style and lead length please refer to the Ordering/Part Number Information page. Note: dV/dt ratings based on measurements made at junction of the wire leads and capacitor body. Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 7 16 P HV, Orange Drop®, Polypropylene Film/Foil Capacitors High Performance RMS Voltage vs. Frequency @ +85°C Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 7 16 P HV, Orange Drop®, Polypropylene Film/Foil Capacitors High Performance |Z| (ohms) Typical Impedance vs. Frequency 1000VDC/450VAC |Z| (ohms) Frequency (MHz) 2000VDC/500VAC Frequency (MHz) Please note: Capacitance values above are in µF The resonant frequency and impedance shown above apply to units with a 0.250 (6.4) lead length and are typical values only. Please contact us for additional data. Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 AC Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. 4