Type 773P, Orange Drop®, Polypropylene Film/Foil Capacitors

Type 773P, Orange Drop®, Polypropylene Film/Foil Capacitors
Type 773P
Orange Drop®
700/750 Volts A-C
Polypropylene Film/Foil
Capacitors
Features
• Specifically designed for A-C voltage
applications where corona free operation
is required for high reliability.
• Extremely low dissipation factor and ESR.
• Superb for high frequency, high pulse
current applications; dV/dt rating
up to 74,600 volts/µsec.
Insulation Resistance:
400,000 M minimum at +25°C
20,000 M minimum at +85°C
2,000 M minimum at +105°C
Temperature Coefficient (typical, over
temperature range of -55°C to +85°C):
-250 ppm/°C
Pulse Rise Time, dV/dt:
See standard ratings table.
• Excellent capacitance stability.
• Compact size with various lead spacings.
Dissipation Factor & ESR:
See standard ratings table.
Corona Start Voltage (typical):
700 VAC units - 800 Volts RMS
750 VAC units - 850 Volts RMS
Specifications
Capacitance Range:
.001 to .01 µF
Capacitance Tolerance:
±3% to ±10%
Encapsulation:
Conformal coating of flame retardant
orange epoxy (meets UL94V-0 specifications)
Voltage Ratings:
700 Volts A-C/1600 Volts D-C
750 Volts A-C/1600 Volts D-C
Dielectric:
Polypropylene film; utilizing a floating
common of double metallized film,
which provides self-healing characteristics.
Operating Temperature Range:
-55°C to +85°C
(+105°C with proper voltage derating)
Construction:
Non-inductively wound with extended
foil, internal series-section design.
Lead Wire:
Tinned copper-clad steel,
.032" (.8) diameter, #20 AWG
Applications:
Electronic Lighting Ballasts, Switching
Power Supplies, Resonant Converters.
Dimensions in inches, metric (mm) in parenthesis.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 773 P , Orange Drop®, Polypropylene Film/Foil Capacitors
General Specifications
The 773P series are manufactured with polypropylene film and extended foil. Polypropylene has a very
low dissipation factor, low dielectric absorption and exhibits excellent capacitance stability. These characteristics
combined with the direct connection of the lead wire to the extended foil electrode makes the 773P
series ideal for high current, high pulse applications.
The 773P series has a round profile and is available in tolerances as close as ±1%. The 773P series has a pressed
profile and, in addition, is designed with copper leads, thus adding to it's performance in high frequency, high
pulse current applications.
Other specifications are listed below and on the following pages.
Operating Temperature Range:
Humidity Testing:
The standard operating temperature range for
polypropylene f ilm is -55 °C to +85 °C. The
773P may be operated up to +105°C
provided the DC working voltage is reduced
by 50%.
Units subjected to 95% relative humidity for 72
hours with no voltage applied at +75 °C. After 4
hours of drying minimum product of insulation
resistance and capacitance shall be 50,000 megohmmicrofarads.
For specific derating of the AC voltage when
operating above +85 °C please contact our
design engineering department.
DC Voltage Life Test:
The maximum operating temperature for 773P
polypropylene film capacitors is
+ 105 °C.
Dielectric Withstanding Voltage:
Units rated below 800 VDC shall withstand
a DC potential of 250% of rated voltage applied
between terminals for not more than 5 seconds;
units rated 800 VDC a nd above shall withstand
200% of rated voltage.
Construction:
Non-inductively wound with extended foils,
internal series-section design, utilizing a
floting common dual metallized film.
Temperature Coefficient:
The typical temperature coefficient is -180 ppm/°C
over the temperature range of -55 °C to +85 °C.
Minimum of 500 hours at +85 °C at 150% of rated
voltage. After test, capacitance shall not have
changed by more than 3%, insulation resistance shall
not have decreased by more than 25% and dissipation
factor shall not have changed by more than 0.03%.
Measurements made at 1 KHz.
AC Voltage Life Test:
Minimum of 500 hours at +85 °C at 60 Hz. AC test
voltage applied at 110% of AC rating. After test,
capacitance shall not have changed by more than 3%,
insulation resistance shall not have decreased by
more than 25%, and dissipation factor shall not have
changed by more than 0.03%. Measurements made
at 1 KHz.
Additional notes on Life Testing:
CDE performs standard 500 hour accelerated life tests,
both DC and line frequency AC, to monitor process
control over our wide range of products.
We also perform longer term life testing, typically 2000
hours, during development of most products. In
addition we do accelerated l ife testing at 10-250 K Hz
for our High Performance AC products. For additional
life test information please contact us.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 773P, Orange Drop®, Polypropylene Film/Foil Capacitors
Ordering/Part Number Information
773P
222
5
700
J
B
3
(XXXX)
A suffix may be added by
the factory to denote special
construction.
Lead Length
1 = 0.187 (4.7) ±0.030 (0.8)
2 = 0.250 (6.4) ±0.030 (0.8)
3 = 1.250 (32.0) Minimum
(Custom lead lengths available)
Terminal A = Straight Lead (1.25 Min. lead length)
B,F = Hairpin Crimp
G,H = Hockey Stick Crimp
Case Code See Standard Sizes/Ratings Table
A-C Voltage Rating Expressed in Volts
Capacitance Tolerance 9 = ±10%; 5 = ±5%; 3 = ±3%
Capacitance Expressed in Picofarads. The first two digits are the significant figures,
the third is the number of zeros following. (i.e. 222 = 2200 pF = .0022 µF)
CDE Type Number
Identifies the basic capacitor design.
773P - Pressed profile
Please note:
While it is not possible to list every capacitance value, tolerance, or design/size variation available,
our flexibility in design and manufacturing gives us the ability to quickly, and cost effectively, provide
you with the capacitor you require. Please contact us today with your specific needs!
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 773P, Orange Drop®, Polypropylene Film/Foil Capacitors
Standard Lead Styles
TERMINAL A
TERMINAL B,F
TERMINAL G,H
Standard Lead Spacings
S
Term. A
0.590 (15.0)
Term. B
Term. F
Term. G
0.590 (15.0) 0.394 (10.0) 0.295 (7.5)
Term. H
0.197 (5.0)
Note: Custom lead styles and spacings available by special request.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 773P, Orange Drop®, Polypropylene Film/Foil Capacitors
Type 773P, 700VAC/1600VDC Standard Sizes/Ratings
L MAX
Value (µF) Part Number*
.002
.0022
.0025
.0027
.003
.0033
.0039
.0043
.0047
.0051
.0056
.006
.0062
.0068
.007
.0075
.0082
.0091
.01
773P2025700J
773P2225700J
773P2525700J
773P2725700J
773P3025700J
773P3325700J
773P3925700J
773P4325700J
773P4725700J
773P5125700J
773P5625700J
773P6025700J
773P6225700J
773P6825700J
773P7025700J
773P7525700J
773P8225700J
773P9125700J
773P1035700J
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
Seated
T MAX
.27
.28
.29
.30
.32
.33
.33
.34
.36
.37
.39
.40
.40
.42
.43
.44
.46
.49
.51
(6.9)
(7.1)
(7.4)
(7.6)
(8.1)
(8.4)
(8.4)
(8.6)
(9.1)
(9.4)
(9.9)
(10.2)
(10.2)
(10.7)
(10.9)
(11.2)
(11.7)
(12.4)
(13.0)
H MAX
.44
.45
.47
.48
.49
.51
.56
.57
.59
.60
.62
.63
.64
.65
.66
.68
.70
.72
.74
(11.2)
(11.4)
(11.9)
(12.2)
(12.4)
(13.0)
(14.2)
(14.5)
(15.0)
(15.2)
(15.7)
(16.0)
(16.3)
(16.5)
(16.8)
(17.3)
(17.8)
(18.3)
(18.8)
Height
.69
.70
.72
.73
.74
.76
.81
.82
.84
.85
.87
.88
.89
.90
.91
.93
.95
.97
.99
(17.5)
(17.8)
(18.3)
(18.5)
(18.8)
(19.3)
(20.6)
(20.8)
(21.3)
(21.6)
(22.1)
(22.4)
(22.6)
(22.9)
(23.1)
(23.6)
(24.1)
(24.6)
(25.1)
Max dV/dt Peak I
Max % D.F.
(Volts/µsec) Amps 20KHz 100KHz
49300
47000
44100
42400
40200
38300
35300
33600
32100
30800
29400
28400
28000
26700
26300
25400
24300
23200
22000
150
150
170
170
180
190
210
220
230
240
250
260
260
270
280
290
300
310
330
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.030
.030
.030
.030
.037
.037
.037
.037
.037
.038
.038
.038
.039
.039
.040
.040
.040
.041
.041
.041
.042
.043
.043
Max ESR
20KHz 100KHz
1042
948
835
774
698
635
539
490
449
415
379
354
343
314
305
285
262
237
216
264
242
241
199
180
165
142
130
120
111
102
96
94
86
84
79
74
68
63
Type 773P, 750VAC/1600VDC Standard Sizes/Ratings
Value (µ F)
.001
.0012
.0015
.0018
.002
.0022
.0025
.0027
.003
.0033
.0039
.0043
.0047
.0051
.0056
.006
.0062
.0068
Seated
Part Number*
773P1025750J
773P1225750J
773P1525750J
773P1825750J
773P2025750J
773P2225750J
773P2525750J
773P2725750J
773P3025750J
773P3325750J
773P3925750J
773P4325750J
773P4725750J
773P5125750J
773P5625750J
773P6025750J
773P6225750J
773P6825750J
L MAX
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
(19.1)
T MAX
.24
.26
.28
.27
.28
.29
.31
.32
.33
.35
.38
.39
.41
.43
.45
.46
.47
.49
(6.1)
(6.6)
(7.1)
(6.9)
(7.1)
(7.4)
(7.9)
(8.1)
(8.4)
(8.9)
(9.7)
(9.9)
(10.4)
(10.9)
(11.4)
(11.7)
(11.9)
(12.4)
H MAX
.40
.41
.44
.50
.51
.52
.54
.55
.56
.58
.61
.63
.64
.66
.68
.69
.70
.72
(10.2)
(10.4)
(11.2)
(12.7)
(13.0)
(13.2)
(13.7)
(14.0)
(14.2)
(14.7)
(15.5)
(16.0)
(16.3)
(16.8)
(17.3)
(17.5)
(17.8)
(18.3)
Max dV/dt
Height (Volts/µsec)
.65
.66
.69
.75
.76
.77
.79
.80
.81
.83
.86
.88
.89
.91
.93
.94
.95
.97
(16.5)
(16.8)
(17.5)
(19.1)
(19.3)
(19.6)
(20.1)
(20.3)
(20.6)
(21.1)
(21.8)
(22.4)
(22.6)
(23.1)
(23.6)
(23.9)
(24.1)
(24.6)
74600
68100
60900
55600
52800
50300
47200
45400
43100
41100
37800
36000
34400
33000
31500
30500
30000
28600
Peak I
Max % D.F.
Max ESR
Amps 20KHz 100KHz 20KHz 100KHz
110
120
140
150
160
170
180
180
190
200
220
230
240
250
260
270
280
290
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.035
.035
.036
.036
.036
.036
.036
.037
.037
.037
.038
.038
.038
.039
.039
.039
.040
.040
2066
1724
1381
1152
1038
945
833
722
695
633
537
488
448
413
377
353
342
312
510
427
344
289
261
238
211
196
178
163
140
128
118
110
101
95
92
85
* For complete part number please refer to Ordering/Part Number Information page.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 773P, Orange Drop®, Polypropylene Film/Foil Capacitors
RMS Voltage vs. Frequency @ +85°C
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 773P, Orange Drop®, Polypropylene Film/Foil Capacitors
Typical Impedance vs. Frequency
Please note: Capacitance values above are in µF. The resonant frequency and impedance shown above apply
to units with a 0.250" lead length and are typical values only. Please contact us for additional data.
For additonal technical data, custom design information
or if you have a specific application question,
please don't hesitate to contact our design
engineering department. Thank you.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
AC
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specific customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required.
4