Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors For Filtering, Bypassing and Power Supply Decoupling with High Capacitance Requirements Type AVGA Capacitors are rated for 2000 hours at 105 ºC and up to 63 Vdc. They are ideal for high density PC board packaging. The Type AVGA offers a low in-place-cost for a high quality performer. The vertical cylindrical cases facilitate automatic mounting and reflow soldering into the same footprint of like-rated tantalum capacitors except without the need for voltage derating. Type AVGA is RoHS compliant. Operating Temperature: Rated Voltage: Capacitance: Capacitance Tolerance: Leakage Current (at 20 ºC): –40 °C to +105 °C 6.3, 10, 16, 25, 35, 50, 63 Vdc 0.1µF to 4700 µF ±20% @ 120 Hz and +20 °C LE T Specifications E Highlights • +105 °C, Up to 2000 Hours Load Life • Capacitance Range: 0.1 µF to 4700 µF • Voltage Range: 6.3 Vdc to 63 Vdc 6.3 – 63 V 4 – 10 Ø I = 0.01 CV or 3 µA, whichever is greater, after 2 minutes at +20 ºC 12.5 ~ 16 Ø I = 0.03 CV or 4 µA, whichever is greater, after 2 minutes at +20 ºC C = rated capacitance in µF BS O I = leakage current Dissipation Factor: (Tan d at 120 Hz, 20 ºC) Low Temperature Characteristic (at 120 Hz): Rated Voltage 6.3 10 16 25 35 50 63 4 ~ 10 Ø 0.45 0.35 0.28 0.18 0.16 0.14 0.12 12.5 ~ 16 Ø 0.4 0.38 0.34 0.26 0.22 0.18 0.14 When the capacitance exceeds 1000 µF, .02 shall be added for every 1000 µF increase Rated Voltage Z(–25 ºC) O V = rated DC Working voltage in V 6.3 4 ~ 10 Ø 10 16 25 35 50 63 4 3 2 2 2 2 2 Impedance /Z(+20 ºC) 12.5 ~ 16 Ø 5 Ratio Z(–40 ºC) 4 ~ 10 Ø 12 4 3 2 2 2 2 8 6 4 3 3 3 /Z(+20 ºC) 12.5 ~ 16 Ø 10 8 6 4 3 3 3 Impedance ratio shall not exceed the values given in the table above. Load Life Test: Test Time Capacitance Change 2,000 Hours 4 ~ 6.3 Ø : Within ±25 % of initial value 8 ~ 16 Ø : Within ±20 % of initial value Dissipation Factor < 200% of specified value Leakage Current Within specified value * The above specifications shall be satisfied when the capacitors are restored to 20 ºC after the rated voltage is applied for 2,000 hrs at 105 ºC Shelf LifeTest: Test time: 1000 hours; other items are the same as those for life test. Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Outline Drawings, Case Code & Dimensions Table + - (mm) B C (mm) (mm) (mm) W P ±0.2 Fig. (mm) (mm) No. B 4.0 5.7 ±0.3 4.3 4.3 2.0 0.5 to 0.8 1.0 1 C 5.0 5.7 ±0.3 5.3 5.3 2.3 0.5 to 0.8 1.5 1 D 6.3 5.7 ±0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 1 X 6.3 7.7 ±0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 1 F 8.0 10 ±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 1 G 10.0 10 ±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1 Q 10.0 10.3 ±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1 H 12.5 13.5 ±0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2 L 12.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2 P 16.0 16.5 ±0.5 16.3 16.3 5.8 1.1 to 1.4 6.0 2 16 ±0.5 227 M 25 F 24T –F Capacitance Capacitance Voltage Code Case Packaging Code RoHs Tolerance 104 = .1 µF M = ±20% Code Compliant 06 = 6.3 Vdc See 475 = 4.7 µF 10 = 10 Vdc Table 106 = 10.0 µF 16 = 16 Vdc T = Tape & Reel 227 = 220 µF 25 = 25 Vdc Y = Tray Pack 478 = 4700 µF 35 = 35 Vdc (available for H,L, & P case codes) O AVGA Code (mm) A LE T BS O Type L + Part Numbering System AVGA Case Ø D E - 50 = 50 Vdc 24 = Carrier tap Width (mm) 63 = 63 Vdc CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Ratings Max. Catalog Cap Part Number (µF) Max. DCL Max. DF Max. ESR Ripple Current Case Size Quantity @ 120 Hz @ 120 Hz/20 ºC @ 120 Hz/105 ºC Code DxL Per Reel (ohms) (ma) (mm) (ea) (µA) 6.3 Vdc (8 Vdc Surge) AVGA476M06C12T-F 3.0 0.45 15.87 30 C 5x5.7 1000 AVGA107M06D16T-F 6.3 0.45 7.46 69 D 6.3x5.7 1000 220 AVGA227M06X16T-F 14 0.45 3.39 120 X 6.3x7.7 1000 330 AVGA337M06F24T-F 21 0.45 2.26 290 F 8x10 500 470 AVGA477M06F24T-F 30 0.45 1.59 320 F 8x10 500 1000 AVGA108M06G24T-F 63 0.45 0.75 410 G 10x10 500 2200 AVGA228M06H32T-F 416 0.42 0.32 680 H 12.5x13.5 200 3300 AVGA338M06L32T-F 624 0.44 0.22 850 L 12.5x16 150 4700 AVGA478M06P44T-F 888 0.46 0.16 1000 P 16x16.5 125 10 Vdc (13 Vdc Surge) AVGA336M10C12T-F 3.3 47 AVGA476M10D16T-F 4.7 100 AVGA107M10D16T-F 10 220 AVGA227M10X16T-F 22 330 AVGA337M10F24T-F 33 470 AVGA477M10F24T-F 47 470 AVGA477M10G24T-F 47 1000 AVGA108M10Q24T-F 100 AVGA228M10L32T-F 660 3300 AVGA338M10P44T-F 990 4700 AVGA478M10P44T-F 1410 17.58 30 C 5x5.7 1000 0.35 12.35 48 D 6.3x5.7 1000 0.35 5.80 69 D 6.3x5.7 1000 0.35 2.64 120 X 6.3x7.7 1000 0.35 1.76 290 F 8x10 500 0.35 1.23 320 F 8x10 500 0.35 1.23 410 G 10x10 500 0.35 0.58 410 Q 10x10.3 500 0.40 0.30 750 L 12.5x16 150 0.42 0.21 1000 P 16x16.5 125 0.16 1000 P 16x16.5 125 0.44 BS O 2200 0.35 LE T 33 E 47 100 16 Vdc (20 Vdc Surge) 10 22 33 47 100 220 330 470 1000 3.0 0.28 46.42 17 B 4x5.7 2000 3.5 0.28 21.10 30 C 5x5.7 1000 AVGA336M16D16T-F 5.3 0.28 14.07 45 D 6.3x5.7 1000 AVGA476M16D16T-F 7.5 0.28 9.88 48 D 6.3x5.7 1000 AVGA107M16D16T-F 16 0.28 4.64 69 D 6.3x5.7 1000 AVGA227M16X16T-F 35 0.28 2.11 120 X 6.3x7.7 1000 AVGA337M16F24T-F 53 0.28 1.41 290 F 8x10 500 AVGA477M16F24T-F 75 0.28 0.99 320 F 8x10 500 AVGA108M16H32T-F 480 0.34 0.56 550 H 12.5x13.5 200 AVGA228M16P44T-F 1056 0.36 0.27 950 P 16x16.5 125 AVGA338M16P44T-F 1584 0.38 0.19 950 P 16x16.5 125 O 2200 AVGA106M16B12T-F AVGA226M16C12T-F 3300 25 Vdc (32 Vdc Surge) 4.7 AVGA475M25B12T-F 3.0 0.18 63.49 13 B 4x5.7 2000 10 AVGA106M25C12T-F 3.0 0.18 29.84 23 C 5x5.7 1000 22 AVGA226M25D16T-F 5.5 0.18 13.56 38 D 6.3x5.7 1000 33 AVGA336M25D16T-F 8.3 0.18 9.04 50 D 6.3x5.7 1000 47 AVGA476M25D16T-F 12 0.18 6.35 60 D 6.3x5.7 1000 100 AVGA107M25X16T-F 25 0.18 2.98 100 X 6.3x7.7 1000 220 AVGA227M25F24T-F 55 0.18 1.36 320 F 8x10 500 330 AVGA337M25G24T-F 83 0.18 0.90 375 G 10x10 500 500 470 AVGA477M25G24T-F 118 0.18 0.64 410 G 10x10 1000 AVGA108M25L32T-F 750 0.26 0.43 550 L 12.5x16 150 2200 AVGA228M25P44T-F 1650 0.28 0.21 820 P 16x16.5 125 Contact factory for tray pack (Y) quantities CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Max. Part Number (µF) Max. DCL Max. DF Max. ESR Ripple Current Case Size Quantity @ 120 Hz @ 120 Hz/20 ºC @ 120 Hz/105 ºC Code DxL Per Reel (ohms) (ma) (mm) (ea) (µA) AVGA475M35B12T-F AVGA106M35C12T-F AVGA226M35D16T-F AVGA336M35D16T-F AVGA476M35X16T-F AVGA107M35F24T-F AVGA227M35G24T-F AVGA337M35Q24T-F AVGA477M35H32T-F AVGA108M35P44T-F 3.0 3.5 7.7 12 16 35 77 116 494 1050 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.22 0.22 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 100 220 330 470 AVGA104M50B12T-F AVGA224M50B12T-F AVGA334M50B12T-F AVGA474M50B12T-F AVGA105M50B12T-F AVGA225M50B12T-F AVGA335M50B12T-F AVGA475M50C12T-F AVGA106M50D16T-F AVGA226M50D16T-F AVGA336M50X16T-F AVGA476M50X16T-F AVGA107M50F24T-F AVGA107M50G24T-F AVGA227M50Q24T-F AVGA337M50H32T-F AVGA477M50L32T-F 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 5.0 11 17 24 50 50 110 165 235 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.18 0.18 AVGA474M63B12T-F AVGA105M63B12T-F AVGA225M63B12T-F AVGA335M63C12T-F AVGA475M63D16T-F AVGA106M63D16T-F AVGA226M63X16T-F AVGA336M63F24T-F AVGA476M63F24T-F AVGA476M63G24T-F AVGA107M63Q24T-F AVGA227M63H32T-F AVGA337M63P44T-F AVGA477M63P44T-F 3.0 3.0 3.0 3.0 3.0 6.3 14 21 30 30 63 416 624 888 BS O O 0.47 1 2.2 3.3 4.7 10 22 33 47 47 100 220 330 470 16 27 44 54 80 320 375 410 520 750 B C D D X F G Q H P 4x5.7 5x5.7 6.3x5.7 6.3x5.7 6.3x7.7 8x10 10x10 10x10.3 12.5x13.5 16x16.5 2000 1000 1000 1000 1000 500 500 500 200 125 2 3 4 5 10 16 18 20 32 47 65 80 230 375 375 500 550 B B B B B B B C D D X X F G Q H L 4x5.7 4x5.7 4x5.7 4x5.7 4x5.7 4x5.7 4x5.7 5x5.7 6.3x5.7 6.3x5.7 6.3x7.7 6.3x7.7 8x10 10x10 10x10.3 12.5x13.5 12.5x16 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 1000 1000 500 500 500 200 150 5 8 12 17 22 32 58 140 170 310 310 470 700 700 B B B C D D X F F G Q H P P 4x5.7 4x5.7 4x5.7 5x5.7 6.3x5.7 6.3x5.7 6.3x7.7 8x10 8x10 10x10 10x10.3 12.5x13.5 16x16.5 16x16.5 2000 2000 2000 1000 1000 1000 1000 500 500 500 500 200 125 125 LE T 4.7 10 22 33 47 100 220 330 470 1000 35 Vdc (44 Vdc Surge) 56.44 26.53 12.06 8.04 5.64 2.65 1.21 0.80 0.78 0.36 50 Vdc (63 Vdc Surge) 2320.96 1054.98 703.32 493.82 232.10 105.50 70.33 49.38 23.21 10.55 7.03 4.94 2.32 2.32 1.06 0.90 0.64 63 Vdc (79 Vdc Surge) 423.27 198.94 90.43 60.28 42.33 19.89 9.04 6.03 4.23 4.23 1.99 1.06 0.70 0.49 E Catalog Cap 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.14 Contact factory for tray pack (Y) quantities CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Recommended Land Patterns by case size for AVGA series B A B Case Size 4x5.7 5x5.7 6.3x5.7 6.3x7.7 8x10 10x10 10x10.3 12.5x13.5 12.5x16 16x16.5 Land Dimensions (mm) C B A 1.6 2.6 1 1.6 3 1.4 1.6 3.5 1.9 1.6 3.5 1.9 2.5 3.5 3 2.5 4 4 2.5 4 4 4 7.5 7 4 7.5 7 6 8.5 9.5 O BS O Case Code B C D X F G Q H L P LE T E C CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Recommended Soldering Methods Recommended Reflow Soldering Profile: O BS O For case diameters 4 thru 6.3 mm with a voltage rating of 63 Vdc LE T E For case diameters 4 thru 6.3 mm with voltage ratings of 6.3 to 50Vdc For case diameters 8 to 16 mm Case sizes 4 thru 6.3 mm dia. (4 to 50V) should be subjected to just one reflow soldering process. The 8 thru 16 mm dia. case sizes(and 4 thru 6.3 mm dia. at 63V) should be subjected to a maximum of two reflow soldering processes. Soldering with a solder iron should be performed with a maximum soldering iron tip temperature of 350±5°C for 3 to 4 seconds. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors O BS O LE T E Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com