RoHS Compliant Compliant Part Number Package Marking Date Compliant Sn <1000 PPM Y Add -F Per JESD97 8/1/2003 AEB (12.5 - 18 mm Dia) Aluminum Electrolytic Capacitors (SMT) N Sn <1000 PPM Y Add -F Per JESD97 8/1/2003 (4 - 10mm Dia) Aluminum Electrolytic Capacitors (SMT) N Notes PB Free N Soldering Conditions (Temp/Time) Termination Finish (10 mm Dia) Aluminum Electrolytic Capacitors (SMT) Moisture Sensitivity Level (IPC/JEDEC JSTD-020C) RoHS Compliance Identification on Device AEB Series or Type Description or Photo SMT RoHS Compliance Worksheet V-Chips CDE Case Code "J" & "K" use a low boiling point electrolyte which will not stand up to Pb-Free soldering processes http://www.cde.com/catalogs/AEB.pdf N/A AFC N/A Sn·3Bi/Sn <1000 PPM Y Add -F Per JESD97 8/1/2003 N/A (12.5 - 18 mm Dia) Aluminum Electrolytic Capacitors (SMT) N (4 - 10 mm Dia) Aluminum Electrolytic Capacitors (SMT) N AFC AFK Sn <1000 PPM Y Add -F Per JESD97 8/1/2003 N/A Sn·3Bi/Sn <1000 PPM Y Add -F Per JESD97 8/1/2003 N/A AFK AHA AHD AVS (12.5 - 18 mm Dia) Aluminum Electrolytic Capacitors (SMT) N <1000 PPM Y Add -F Per JESD97 8/1/2003 N/A Aluminum Electrolytic Capacitors (SMT) N Aluminum Electrolytic Capacitors (SMT) N/A Aluminum Electrolytic Capacitors (SMT) Sn Sn·3Bi/Sn <1000 PPM Y Add -F Per JESD97 N Sn·3Bi/Sn N <1000 PPM N Y N/A Add -F N/A Per JESD97 CDE Case Code: L, P, U, R, S http://www.cde.com/catalogs/AEB.pdf ≤ 5 Sec at 250° C (4 mm to 6.3mm Dia); ≤ 5 Sec. At 235° C (8mm to 10 mm Dia) CDE Case Codes: B, C, D CDE Case Codes: E, F, G http://www.cde.com/catalogs/AFC.pdf ≤ 5 Sec at 250° C (4 mm to 6.3mm Dia); ≤ 5 Sec. At 235° C (8mm to 10 mm Dia) ≤ 5 Sec at 250° C (4 mm to 6.3mm Dia); ≤ 5 Sec. At 235° C (8mm to 10 mm Dia) ≤ 20 Sec at 230° C (≥ 12.5 mm Dia) CDE Case Code: L, P, R, S http://www.cde.com/catalogs/AFC.pdf CDE Case Codes: B, C, D , X CDE Case Codes: E, F, G http://www.cde.com/catalogs/AFK.pdf CDE Case Codes: H, P, R http://www.cde.com/catalogs/AFK.pdf N/A ≤ 5 Sec at 250° C (4 mm to 6.3mm Dia); ≤ 5 Sec. At 235° C (8mm to 10 mm Dia) ≤ 5 Sec at 240° C (4 mm to 6.3mm Dia); ≤ 5 Sec. At 230° C (8mm to 10 mm Dia) CDE Case Codes: B, C, D CDE Case Codes: E, F, G http://www.cde.com/catalogs/AHD.pdf N/A ≤ 5 Sec at 250° C (4 mm to 6.3mm Dia); ≤ 5 Sec. At 235° C (8mm to 10 mm Dia) CDE Case Codes: A B, C, D , X CDE Case Codes: E, F, G http://www.cde.com/catalogs/AVS.pdf 8/1/2003 N/A N/A ≤ 5 Sec at 230° C (12.5 mm to 18mm Dia) N/A 8/1/2003 CDE Case Codes: B, C, D , X CDE Case Codes: E, F, G http://www.cde.com/catalogs/AHA.pdf SOLID POLYMER ALUMINUM Temperature 5°C to 30°C without direct sunlight Humidity: Less than 70% RH Maximum Storage term and condition before opening the package: 2 years after manufacturing (JEDEC J-STD-020B MSL: Level 2) Maximum Storage term and condition after opening the package: Less than 14 days* (JEDEC J-STD020B MSL: Level 3) * Part Numbers: (7 days or less) ESRD4R7M12R, ESRD100M12R, ESRD150M12R, ESRD220M12R, ESRD2R2M16R, ESRD4R7M16R, ESRD6R8M16R, ESRD8R2M16R and ESRL150M12R All products should be used within the storage term after opening the package. “After the storage limit, baking treatment is necessary to be able to use the products” The storage conditions after baking Terminal Base Material: Cu Terminal Finish Material: Sn RoHS Compliant: Date Code May 2002 and beyond ESR SMT Specialty Polymer Aluminum Electrolytic Capacitors N Sn <1000 PPM Y NO CHANGE Per JESD97 5/2002 ESRD SMT Specialty Polymer Aluminum Electrolytic Capacitors N Sn <1000 PPM Y NO CHANGE Per JESD97 5/2002 ESRE SMT Specialty Polymer Aluminum Electrolytic Capacitors N Sn <1000 PPM Y NO CHANGE Per JESD97 5/2002 ESRH SMT Specialty Polymer Aluminum Electrolytic Capacitors N Sn <1000 PPM Y NO CHANGE Per JESD97 5/2002 ESRL SMT Specialty Polymer Aluminum Electrolytic Capacitors N Sn <1000 PPM Y NO CHANGE Per JESD97 5/2002 SPA SMT Specialty Polymer Aluminum Electrolytic Capacitors N Sn <1000 PPM Y NO CHANGE Per JESD97 5/2002 SPCX SMT Specialty Polymer Aluminum Electrolytic Capacitors N Sn <1000 PPM Y NO CHANGE Per JESD97 SINCE INCEPTION MSL LEVEL 3 In Bag, MSL LEVEL 2 once bag is opened 260 °C max., 5 s http://www.cde.com/catalogs/SPCX.p df SPSX SMT Specialty Polymer Aluminum Electrolytic Capacitors N Sn <1000 PPM Y NO CHANGE Per JESD97 SINCE INCEPTION MSL LEVEL 3 In Bag, MSL LEVEL 2 once bag is opened 260 °C max., 5 s Terminal Base Material: Cu Terminal Finish Material: Sn http://www.cde.com/catalogs/SPSX.p df SMT Film Chip Capacitors N Sn-Ag-Cu <1000 PPM Y NO CHANGE Per JESD97 11/02 5A Peak Temp: 240° C max 5 sec Recommended Temp: 235° C max 5 sec Terminal Finish - Sn-Ag-Cu RoHS Compliant Date Code November 2002 and beyond http://www.cde.com/catalogs/FCA.pdf Terminal Base Material: Cu Terminal Finish Material: Sn RoHS Compliant: Date Code May 2002 and beyond http://www.cde.com/catalogs/ESRD.p Terminal Base Material: Cu Terminal Finish Material: Sn RoHS Compliant: Date Code May 2002 and beyond 240 °C max., 5 s; ≥ 200 http://www.cde.com/catalogs/ESRE.p df °C: 30 s max. Terminal Base Material: Cu Terminal Finish Material: Sn RoHS Compliant: Date Code May 2002 and beyond http://www cde com/catalogs/ESRH p Terminal Base Material: Cu Terminal Finish Material: Sn RoHS Compliant: Date Code May 2002 and beyond Terminal Base Material: Cu Terminal Finish Material: Sn RoHS Compliant: Date Code May 2002 and beyond http://www cde com/catalogs/SPA pdf SMT Film FCA RoHS Compliance Identification on Device Termination Finish PB Free RoHS Compliant Compliant Part Number Package Marking Date Compliant Moisture Sensitivity Level (IPC/JEDEC JSTD-020C) Soldering Conditions (Temp/Time) Notes FCN SMT Film Chip Capacitors N Sn-Ag-Cu <1000 PPM Y NO CHANGE Per JESD97 11/02 N/A Peak Temp: 240° C max 5 sec Recommended Temp: 235° C max 5 sec Terminal Finish - Sn-Ag-Cu RoHS Compliant Date Code November 2002 and beyond http://www.cde.com/catalogs/FCN.pdf FCP SMT Film Chip Capacitors N Sn-Ag-Cu <1000 PPM Y NO CHANGE Per JESD97 Nov. 2002 N/A Peak Temp: 260° C max 5 sec Recommended Temp: 240° C max 5 sec Terminal Finish - Sn-Ag-Cu RoHS Compliant Date Code November 2002 and beyond http://www.cde.com/catalogs/FCP.pdf CS_G SMT CAPSTICK N SnPb N RoHS-5 NO CHANGE 4 220°C for 30 sec. CS_G-FA SMT CAPSTICK N Sn <1000 PPM Y add -FA 4 220°C for 30 sec. CB_G SMT CAPSTICK N SnPb N RoHS-5 NO CHANGE 4 220°C for 30 sec. CB_G-FA SMT CAPSTICK N Sn <1000 PPM Y add -FA Per JESD97 4 220°C for 30 sec. CB_G-FS SMT CAPSTICK N Sn <1000 PPM Y add -FS Per JESD97 4 245°C for 30 sec. Teflon® SMT Metal Clad N/A Ag <1000 PPM Y add suffix -F PER JESD97 Always N/A 260°C/10s 1/1/2006 N/A 260°C/10s 1/2/2006 N/A 260°C/10s 3/25/2005 2A 220-260/10s 3/25/2005 2A 220-260/10s 5 seconds, max. of 60 sec. at or a Series or Type Description or Photo SMT RoHS Compliance Worksheet Per JESD97 SMT MICA MIN (MIN02-002 style) MIN (MIN02-002 style) Mica SMT Metal Clad N/A Ag MCM (MCM01-009 style) Mica SMT Metal Clad N/A Ag SMT Mica Chip N Sn Nonmagnetic SMT Mica Chip N Sn MC MCH, MCN <1000 PPM* <1000 PPM* <1000 PPM* <1000 PPM* Y add suffix -F Y add suffix -F Y add suffix -F Y always been compliant PER JESD97 PER JESD97 PER JESD97 PER JESD97 http://www.cde.com/catalogs/MCMMIN.pdf http://www.cde.com/catalogs/MCMMIN.pdf http://www.cde.com/catalogs/MCMMIN.pdf http://www.cde.com/catalogs/MC.pdf http://www.cde.com/catalogs/MCHMCHN.pdf V-Chips AVE Sn yes no n/a AVE Sn yes no n/a AVES Sn yes no n/a AVEK Sn yes no AVEK Aluminum Electrolytic Capacitors (SMT) N Y n/a Sn yes AVEZ Sn yes no n/a AVGA Sn yes no n/a AVGA Sn yes no n/a AVGA no n/a 7/5/2007 no n/a Sn yes HZA SMT Hybrid-Polymer N Sn3Bi/Sn < 1000 PPM Y Add -F JESD97 Always N/A HZC SMT Hybrid-Polymer N Sn3Bi/Sn < 1000 PPM Y Add -F JESD97 Always N/A Revision Date:4/1/15 * subject to exemption #5 To the best of our knowledge, the information provided on the enclosed is correct as of the date indicated on the document. Since some of the information is provided by the acceptance of data from sources outside of Cornell Dubilier Electronics, we can not guarantee that all is complete and accurate. Humidity: Less than 70% RH Maximum Storage term and condition before opening the package: 2 years after manufacturing (JEDEC J-STD-020B MSL: Level 2) Maximum Storage term and condition after opening the package: Less than 14 days* (JEDEC J-STD-020B MSL: Level 3) * Part Numbers: (7 days or less) ESRD4R7M12R, ESRD100M12R, ESRD150M12R, ESRD220M12R, ESRD2R2M16R, ESRD4R7M16R, ESRD6R8M16R, ESRD8R2M16R and ESRL150M12R All products should be used within the storage term after opening the package. “After the storage limit, baking treatment is necessary to be able to use the products” The storage conditions after baking are the same as those after opening the package. n/a 3 to 6.3 mm dia. http://www.cde.com/catalogs/AVE.pdf 8 and 10 mm dia. 5 seconds, max. of 40 sec. at or a http://www.cde.com/catalogs/AVE.pdf 5 seconds, max. of 60 sec. at or a http://www.cde.com/catalogs/AVES.pdf 3 to 6.3 mm dia. 5 seconds, max. of 60 sec. at or a http://www.cde.com/catalogs/AVEK.p 8 and 10 mm dia. http://www.cde.com/catalogs/AVEK.p 5 seconds, max. of 40 sec. at or a df 5 seconds, max. of 60 sec. at or a http://www.cde.com/catalogs/AVEZ.pdf 4 to 6.3 mm dia., 6.3 to 50 Vdc http://www.cde.com/catalogs/AVGA.p 5 seconds, max. of 60 sec. at or a df 4 to 6.3 mm dia., 63 Vdc 5 seconds, max. of 60 sec. at or a http://www cde com/catalogs/AVGA p 8 to 16 mm dia. http://www.cde.com/catalogs/AVGA.p 5 seconds, df @ max. of (40 sec. at or a Dia) 5s @ 260 C (5 10.2m CDE Case Codes C, D, F, G, X Dia) CDE Case Codes C, D, F, G, X