PRODUCT DATASHEET European Region + 44 (0) 208 920 2306 www.energizer-eu.com Energizer AC10 - Mercury Free Specifications (top view) (bottom view) Industry Standard Dimensions (mm) Chemical System: Tab Color: Designation: Nominal Voltage: Typical Capacity: Zinc Air (Zn/O2) Yellow IEC-PR70 1.4 Volts 91 mAh (to 0.9 volts) (Rated at 3k ohms at 21°C/50% RH) Typical Weight: Typical Volume: 0.32 grams 0.08 cubic centimeters Impedance The total opposition that a battery offers to the flow of alternating current. Impedance is a combination of resistance and reactance. 0.25 Minimum 3.18 3.00 3.60 3.30 1.35R Typical The typical impedance of these cells on open circuit and during useful discharge varies from 5-20 ohms. This applies over a frequency range of 40-5,000 hertz at the current drains shown below. 0.015 Typical Coining Depth 5.80 5.60 Impedance vs. Frequency Typical Discharge Characteristics Schedule: 16 hours/day Typical Drain @ 1.3V: 0.43 & 0.22 milliamperes Load: 3K & 6K ohms 00% DoD 30 25% DoD 25 50% DoD 20 80% DoD 15 10 5 0 1.3 0.1 1.2 1 10 100 1000 Frequency (Hz) 10000 100000 1.1 Impedance vs. Depth of Discharge 1.0 0.9 3K 25 6K 0.8 0 50 100 150 200 250 300 350 400 450 Service, Hours Simulated Application Test Typical Performance at 21°C & 50% RH Schedule: 16 Hours/Day 16 Hours/Day Typical Drains: at 1.3V (milliamperes) Load (ohms) Cutoff 0.9V (hours) 0.43 0.22 3,000 6,000 211 414 Impedance (ohms) Operating Voltage 1.4 Impedance (ohms) 35 20 15 40 Hz 10 5 1K Hz 0 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Depth of Discharge Important Notice This datasheet contains typical information specific to batteries manufactured at the time of its publication. Contents herein do not constitute a warranty. ©Energizer Holdings, Inc. - All Rights Reserved Engineering Data Form No. EBC - 8835EU Page 1 of 1