TH09/2479 TH97/2478 IATF 0113686 SGS TH07/1033 www.eicsemi.com BYV32 Series Dual Ultra Fast Rectifiers TO-220AB PRV : 50 - 200 Volts Io : 18 Ampere 0.154(3.91)DIA. 0.148(3.74) 0.055(1.39) 0.045(1.14) 0.113(2.87) 0.103(2.62) FEATURES : * * * * * * 0.415(10.54)MAX. Glass passivated chip junction High current capability High surge current capability Low leakage, high voltage High reliability Pb / RoHS Free 0.145(3.68) 0.135(3.43) 0.635(16.13) 0.625(15.87) 0.185(4.70) 0.175(4.44) 0.603(15.32) 0.573(14.55) 0.350(8.89) 0.330(8.39) 1 2 3 0.160(4.06) 0.140(3.56) PIN 1 0.560(14.22) 0.530(13.46) PIN 2 CASE PIN 3 MECHANICAL DATA : * * * * 0.037(0.94) 0.027(0.68) 0.205(520) 0.195(4.95) Case : TO-220AB Molded plastic Polarity : As marked on the body Mounting position : Any Weight : 2.24 grams 0.022(0.56) 0.014(0.36) 0.105(2.67) 0.095(2.41) Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ta =25°C unless otherwise specified.) SYMBOL BYV 32-50 BYV 32-100 Maximum Repetitive Peak Reverse Voltage VRRM 50 100 150 200 V Maximum RMS Voltage VRMS 35 70 105 140 V Maximum DC Blocking Voltage VDC 50 100 150 200 V Maximum Average Forward Current, Tc = 125°C IF(AV) 18 A IFSM 150 A VF 1.15 V IR 10 (Tc = 25°C) µA RATING BYV 32-150 BYV 32-200 UNIT Maximum Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at Tc = 100°C Maximum Instantaneous Forward Voltage per Leg at IF = 20A (1) IF = 5.0A, Tj = 100°C Maximum Reverse Current per Leg 0.85 at Rated DC Blocking Voltage IR(H) 600 (Tc = 100°C) µA Maximum Reverse Recovery Time per Leg (IF = 1A, VR = 30V , di/dt = 100A/µs, Irr = 10%IRM) Trr 25 ns Typical junction capacitance at 4V, 1MHz Cj 45 pF RθJC 1.6 °C/W TJ, TSTG - 65 to + 150 °C Maximum Thermal Resistance, Junction to Case Operating storage and temperature range Note : (1) Pulse test: 300µs pulse width, 1% duty cycle Page 1 of 2 Rev. 01 : July 9, 2005 TH09/2479 TH97/2478 www.eicsemi.com IATF 0113686 SGS TH07/1033 RATING AND CHARACTERISTIC CURVES ( BYV32 SERIES ) FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD OUTPUT CURRENT, AMPERES 20 Resistive or Inductive Load 16 12 8.0 4.0 0 0 25 50 75 100 125 150 175 150 TJ = 150C 10ms Single Half Sine-Wave (JEDEC Method) 125 100 75 50 25 0 1 10 CASE TEMPERATURE, ( °C) FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG FIG.4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG 1000 REVERSE CURRENT, MILLIAMPERES TJ = 125 °C 10 1 TJ = 25 °C 0.1 Pulse Width = 300µs 1% Duty Cycle 0.3 0.5 0.7 0.9 1.1 100 1 Tc = 25 °C 0.1 1.3 Tc = 100 °C 10 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0 20 40 60 80 100 PERCENT OF RATE REVERSE VOLTAGE, (%) FIG. 5 – TYPICAL JUNCTION CAPACITANCE PER LEG JUNCTION CAPACITANCE, pF INSTANTANEOUS FORWARD CURRENT, AMPERES 100 0.01 0.1 100 NUMBER OF CYCLES AT 50Hz 60 TJ = 25 ºC f = 1.0 MHz Vsig = 5 mVp-p 50 40 30 20 10 0 1 10 100 REVERSE VOLTAGE, VOLTS Rev. 01 : July 9, 2005