DRP10 SERIES 10A REDUNDANT MODULE FEATURES ‧SUITABLE FOR REDUNDANT OPERATION OF 12V / 24V SYSTEM MAX 10A ‧3 YEARS WARRANTY a SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed GENERAL Characteristics Conditions min. typ. max. unit Ambient temperature Operating at Vi nom -40 + 71 o C Storage temperature Non operational -40 + 85 o C Relative humidity Vi nom, Io nom 20 95 MTBF Bellcore Issue 6 @40 oC, GB Altitude during operation IEC 60068-2-13 % RH Hours 10,830,000 m 4,850 Dimension mm L91 x W35 x D56.5 Cooling Free air convection Installation position Vertical ( other direction may derating using ) INPUT SPECIFICATIONS Characteristics Rated input voltage Conditions Io nom min. 9 Number of inputs Rated input current typ. max. unit 35 VDC 10 A max. unit 2 Each channel OUTPUT SPECIFICATIONS Characteristics Conditions Output voltage drop Vin - Vout Rated output current Vi nom min. typ. Reverse voltage (max) Maximum output current V 0.5 10 A 35 V 16A for 300 sec. Vi nom APPROVALS AND STANDARDS CE EN 55022 Class B, EN 55024 EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-6, EN 61000-4-8 ENV 50204, EN 61204-3 LVD EN 60950-1 Vibration resistance meet IEC 60068-2-6 (Mounting on rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) PHYSICAL CHARACTERISTICS Screw terminal type 91 x 35 x 56.5 mm (3.58 x 1.38 x 2.22 inches) Case material Weight Plastic 75g 0.13kg ; 88 Packing www.chinfa.com 2015.05.12 / 12.5kg / 1.82CUFT [email protected] P1 DRP10 SERIES MECHANISM & PIN CONFIGURATION CONSTRUCTION mm [inch] Easy snap-on mounting onto the DIN-Rail (TS35/7.5 or TS35/15), unit sits safeIy and firmly on the rail. A+ 35.00 [1.38] 1 2 3 4 5 6 - B+ INSTALLATION Ventilation / Cooling Normal convection All sides 25mm free space For cooling recommended Connector size range AWG24-12 (0.2~2.5mm2 ) flexible / solid cable, connector can withstand torque at maximum 6 pound-inches. 7 m/m stripping at cable end recommends Use copper conductors only, 60 / 75oC 91.00 [3.58] 49.85 [1.96] - 56.50 [2.22] - 32.50 [1.28] + + + - 52.00 [2.05] 45.00 [1.77] GENERAL TOLERANCE 7 8 9 10 11 12 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] PIN ASSIGNMENT Designation PIN NO. A+ IN 1, 2 Description 3, 4 Input terminal B+ - OUT 5, 6 7, 8, 9 10, 11, 12 + Positive output terminal - Negative output terminal / input terminal TYPICAL APPLICATION NOTES 1.) 1+1 Redundancy : Using 1 more PS as the redundant unit. 2.) Single Use : Connecting only one PS to one DRP10 to reduce the stress of the diodes and hence increase the reliability. PS#1 PS#1 PS#1 PS#2 Vin A Vin B Vin A DRP10 Vin B DRP10 DRP10 Vout Vout Vout Load Load 3.) 1+N Redundancy : Using 1 more PS as the redundant units to increase the reliability. PS#1 Vin A PS#2 Vin B PS#1 PS#2 Vin A Vin B DRP10 Vout PS#1 Vin A DRP10 Vout PS#2 Vin B DRP10 Vout Load CIRCUIT SCHEMATIC Vin A+ Vout+ Vin B+ Vin www.chinfa.com 2015.05.12 [email protected] P2