CLD-AP44 Rev 9A Binning & Labeling Cree® XLamp® XM Family LEDs Table of Contents Introduction Introduction.....................................................................................1 This document describes the product nomenclature required Bin and Order Code Formats..........................................................2 to select and order Cree’s XLamp® XM family of LEDs. XLamp Performance Groups – Luminous Flux.........................................3 XM family LEDs are tested and sorted into bins which are then Performance Groups – Chromaticity.............................................4 combined into orderable kits identified by an order code. Performance groups – Voltage......................................................6 Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE All XLamp LEDs are tested and sorted by color and brightness Curve................................................................................................7 into a unique bin. Each bin contains LEDs from only one color Cree’s Standard Cool White Kits Plotted on ANSI Standard and brightness group and is uniquely identified by a bin code. Chromaticity Regions.....................................................................9 White XLamp LEDs are sorted by chromaticity (color) and Cree’s Standard Warm and Neutral White Kits Plotted on ANSI luminous flux (brightness). High Voltage White XLamp LEDs Standard Chromaticity Regions...................................................10 are sorted by chromaticity, luminous flux and voltage. LEDs are Cree’s Standard Chromaticity Kits...............................................12 shipped on reels containing LEDs from one bin and are always Standard Order Codes and Bins labeled with the appropriate bin code. XM-L ANSI Cool White..........................................................13 XM-L ANSI Neutral White......................................................14 Kits contain LEDs from a number of similar bins and are fully XM-L ANSI Warm White........................................................15 defined by their order codes. A full explanation of the order XM-L2 ANSI Cool White........................................................16 codes for XLamp XM family LEDs, as well as a list of standard XM-L2 ANSI Neutral White....................................................17 order codes, is provided in this document. XM-L2 ANSI Warm White......................................................18 XM-L High Voltage ANSI Cool White....................................20 XM-L High Voltage ANSI Neutral White...............................21 www.cree.com/Xlamp XM-L High Voltage ANSI Warm White..................................22 Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 XLamp ® XM Family LED Binning & Labeling Bin and Order Code Formats Bin codes and order codes for XM-L and XM-L2 White LEDs are configured in the following manner: Order Code Bin Code Series XMLA = XM-L XMLB = XM-L Gen 2 Series XMLA = XM-L XMLB = XM-L Gen 2 Internal code Internal code Luminous flux group Luminous flux group SSSSCC-BD-HHHH-NNNGFFWWW Color specification L = White 0 = Cool White B = 70 CRI minimum H = 80 CRI minimum P = 85 CRI minimum U = 90 CRI minimum Chromaticity group Color specification L = White 0 = Cool White B = 70 CRI minimum H = 80 CRI minimum P = 85 CRI minimum U = 90 CRI minimum SSSSCC-B-WWW-FFF-GG-AAAA Internal code Internal code Chromaticity group Color WT = White Color WT = White Bin codes and order codes for XM-L High Voltage White LEDs are configured in the following manner: Order Code Bin Code Series XML = XM-L Series XML = XM-L Configuration B = Voltage class D = Reel size Configuration B = Voltage class Luminous flux group Color specification L = White H = 80 CRI minimum P = 85 CRI minimum U = 90 CRI minimum Chromaticity group SSSCCC-BD-HHHH-NNNNRFFGG Color specification L = White H = 80 CRI minimum P = 85 CRI minimum U = 90 CRI minimum SSSCCC-B-WWW-FFF-VR-AAAA Luminous flux group Internal code Internal code Voltage performance group Color HVW = High Voltage White Chromaticity group Color HVW = High Voltage White Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 2 XLamp ® XM Family LED Binning & Labeling Performance Groups – Luminous Flux XLamp XM-L and XM-L2 White LEDs are tested for luminous flux and placed into one of the following luminous-flux groups: Group Code Min. Luminous Flux @ 700 mA (lm) Max. Luminous Flux @ 700 mA (lm) S2 148 156 S3 156 164 S4 164 172 S5 172 182 S6 182 200 T2 200 220 T3 220 240 T4 240 260 T5 260 280 T6 280 300 U2 300 320 U3 320 340 U4 340 360 XLamp XM-L High Voltage White LEDs are tested for luminous flux and placed into one of the following luminous-flux groups: Group Code Min. Luminous Flux @ 44 mA (lm) Max. Luminous Flux @ 44 mA (lm) R5 139 148 S2 148 156 S3 156 164 S4 164 172 S5 172 182 S6 182 200 T2 200 220 T3 220 240 T4 240 260 T5 260 280 T6 280 300 Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 3 XLamp ® XM Family LED Binning & Labeling Performance Groups – Chromaticity Region 0A 0R 1A 1R 2A 2R 3A 3R 4A 4R x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.3009 0.2980 0.2950 0.2970 0.3009 0.3042 0.3037 0.2937 0.3048 0.3130 0.3144 0.3186 0.3068 0.3068 0.3144 0.3186 0.3161 0.3059 0.3093 Region x y 0.2920 0.3060 x y 0.2984 0.3133 0.2895 0.3135 0.2962 0.3220 0.2962 0.3220 0.3028 0.3304 0.3042 0.2984 0.2880 0.2895 0.3133 0.3048 0.3135 0.2962 0.2870 0.3210 0.2937 0.3312 0.2937 0.3312 0.2962 0.3220 0.3005 0.3415 0.3028 0.3304 0.3207 0.3028 0.3290 0.3115 0.3304 0.3115 0.3391 0.3205 0.3130 0.3290 0.3213 0.3373 0.3113 0.3048 0.3113 0.3005 0.3207 0.3130 0.3415 0.3099 0.3099 0.3509 0.3115 0.3391 0.3196 0.3602 0.3205 0.3481 0.2993 0.3028 0.3304 0.3115 0.3215 0.3350 0.3290 0.3417 0.3207 0.3462 0.3290 0.3538 0.3290 0.3300 0.3222 0.3243 0.3290 0.3417 0.3215 0.3350 0.3222 0.3243 0.3196 0.3602 0.3290 0.3300 0.3290 0.3180 0.3290 0.3690 0.3290 0.3538 0.3231 0.3371 0.3120 0.3207 0.3490 0.3376 0.3451 0.3554 0.3463 0.3687 0.3440 0.3427 0.3366 0.3369 0.3451 0.3554 0.3371 0.3490 0.3366 0.3440 0.3369 0.3381 0.3428 0.3480 0.3429 0.3307 0.3361 0.3245 0.3463 0.3687 0.3376 0.3616 0.3530 0.3597 0.3548 0.3736 0.3615 0.3659 0.3590 0.3521 0.3641 0.3804 0.3615 0.3659 0.3512 0.3512 0.3465 0.3530 0.3465 0.3571 0.3590 0.3521 0.3668 0.3957 0.3567 0.3389 0.3495 0.3339 0.3641 0.3804 0.3548 0.3736 0B 0S 1B 1S 2B 2S 3B 3S 4B 4S Region x y 0.2984 0.3133 0.3048 0.3207 0.3068 0.3113 0.3207 0.3009 0.3042 0.3220 0.3037 0.2937 0.3009 0.3042 0.3068 0.3113 0.3093 0.2993 0.3391 0.3130 0.3290 0.3481 0.3213 0.3373 0.3221 0.3261 0.3290 0.3144 0.3186 0.3509 0.3144 0.3186 0.3221 0.3261 0.3231 0.3120 0.3391 0.3161 0.3059 0.3290 0.3538 0.3290 0.3417 0.3376 0.3616 0.3371 0.3490 0.3371 0.3490 0.3366 0.3369 0.3290 0.3417 0.3290 0.3300 0.3290 0.3690 0.3290 0.3300 0.3381 0.3762 0.3366 0.3369 0.3376 0.3616 0.3361 0.3245 0.3462 0.3290 0.3538 0.3290 0.3180 0.3616 0.3463 0.3687 0.3451 0.3554 0.3551 0.3760 0.3533 0.3620 0.3533 0.3620 0.3515 0.3487 0.3451 0.3554 0.3440 0.3427 0.3762 0.3480 0.3840 0.3440 0.3428 0.3840 0.3571 0.3907 0.3515 0.3487 0.3551 0.3760 0.3495 0.3339 0.3463 0.3687 0.3429 0.3307 0.3641 0.3804 0.3615 0.3659 0.3736 0.3874 0.3702 0.3722 0.3702 0.3722 0.3670 0.3578 0.3597 0.3615 0.3659 0.3590 0.3521 0.3907 0.3668 0.3957 0.3590 0.3521 0.3771 0.4034 0.3670 0.3578 0.3736 0.3874 0.3640 0.3440 0.3641 0.3804 0.3567 0.3389 0C 0T 1C 1T 2C 2T 3C 3T 4C 4T Region 0D 0U 1D 1U 2D 2U 3D 3U 4D 4U Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 4 XLamp ® XM Family LED Binning & Labeling Performance Groups – Chromaticity (Continued) Region 5A1 5B1 5C1 5D1 6A1 6B1 6C1 6D1 7A1 7B1 x y 0.3670 0.3578 0.3686 0.3649 0.3744 0.3685 0.3726 0.3702 0.3719 0.3797 0.3782 0.3837 0.3763 0.3760 Region x y 0.3686 0.3649 0.3702 0.3722 0.3763 0.3760 0.3612 0.3744 0.3722 0.3719 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837 5A2 5B2 Region x y 0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 0.3685 0.3804 0.3797 0.3782 0.3802 0.3916 0.3869 0.3958 0.3847 0.3877 5A3 5B3 Region x y 0.3726 0.3612 0.3744 0.3685 0.3804 0.3721 0.3721 0.3783 0.3646 0.3837 0.3763 0.3760 0.3782 0.3837 0.3847 0.3877 0.3825 0.3798 5A4 5B4 0.3825 0.3798 0.3847 0.3877 0.3912 0.3917 0.3887 0.3836 0.3847 0.3877 0.3869 0.3958 0.3937 0.4001 0.3912 0.3917 0.3912 0.3917 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958 0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875 0.3783 0.3646 0.3804 0.3721 0.3863 0.3758 0.3840 0.3681 0.3804 0.3721 0.3825 0.3798 0.3887 0.3836 0.3863 0.3758 0.3863 0.3758 0.3887 0.3836 0.3950 0.3875 0.3924 0.3794 0.3840 0.3681 0.3863 0.3758 0.3924 0.3794 0.3898 0.3716 0.3889 0.3690 0.3915 0.3768 0.3981 0.3800 0.3953 0.3720 0.3915 0.3768 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800 0.3981 0.3800 0.4010 0.3882 0.4080 0.3916 0.4048 0.3832 0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 0.4017 0.3751 0.3941 0.3848 0.3968 0.3930 0.4040 0.3966 0.4010 0.3882 0.3968 0.3930 0.3996 0.4015 0.4071 0.4052 0.4040 0.3966 0.4040 0.3966 0.4071 0.4052 0.4146 0.4089 0.4113 0.4001 0.4010 0.3882 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916 0.4080 0.3916 0.4113 0.4001 0.4186 0.4037 0.4150 0.3950 0.4113 0.4001 0.4146 0.4089 0.4222 0.4127 0.4186 0.4037 0.4186 0.4037 0.4222 0.4127 0.4299 0.4165 0.4259 0.4073 0.4150 0.3950 0.4186 0.4037 0.4259 0.4073 0.4221 0.3984 0.4017 0.3751 0.4048 0.3832 0.4116 0.3865 0.4082 0.3782 0.4048 0.3832 0.4080 0.3916 0.4150 0.3950 0.4116 0.3865 0.4116 0.3865 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898 0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.4147 0.3814 0.4147 0.3814 0.4183 0.3898 0.4242 0.3919 0.4203 0.3833 0.4183 0.3898 0.4221 0.3984 0.4281 0.4006 0.4242 0.3919 0.4242 0.3919 0.4281 0.4006 0.4342 0.4028 0.4300 0.3939 0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 0.4259 0.353 0.4221 0.3984 0.4259 0.4073 0.4322 0.4096 0.4281 0.4006 0.4259 0.4073 0.4299 0.4165 0.4364 0.4188 0.4322 0.4096 0.4322 0.4096 0.4364 0.4188 0.4430 0.4212 0.4385 0.4119 0.4281 0.4006 0.4322 0.4096 0.4385 0.4119 0.4342 0.4028 5C2 5D2 6A2 6B2 6C2 6D2 7A2 7B2 5C3 5D3 6A3 6B3 6C3 6D3 7A3 7B3 5C4 5D4 6A4 6B4 6C4 6D4 7A4 7B4 Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 5 XLamp ® XM Family LED Binning & Labeling Performance Groups – Chromaticity (Continued) Region 7C1 7D1 8A1 8B1 8C1 8D1 x y Region x y 0.4385 0.4119 0.4342 0.4028 0.4385 0.4119 0.4449 0.4141 0.4430 0.4212 0.4496 0.4236 0.4403 0.4259 0.4049 0.4449 0.3853 0.4300 0.4300 0.3939 0.4342 0.4028 0.4359 0.3960 0.4316 0.3873 0.4403 0.4049 0.4359 0.3960 0.4373 0.4418 0.3893 0.4418 0.3981 0.4465 0.4475 0.3994 0.4428 0.3906 0.4523 0.4085 0.4475 0.3994 0.4465 0.4071 0.4513 0.4164 0.4513 0.4164 0.4573 0.4178 0.4562 0.4260 0.4624 0.4274 0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4582 0.4099 0.4582 0.4099 0.4634 0.4193 0.4695 0.4207 0.4641 0.4112 0.4634 0.4193 0.4687 0.4289 0.4750 0.4304 0.4695 0.4207 0.4695 0.4207 0.4750 0.4304 0.4813 0.4319 0.4756 0.4221 0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4700 0.4126 0.4483 0.3919 0.4532 0.4008 0.4589 0.4021 0.4538 0.3931 0.4532 0.4008 0.4582 0.4099 0.4641 0.4112 0.4589 0.4021 0.4589 0.4021 0.4641 0.4112 0.4700 0.4126 0.4646 0.4034 0.4538 0.3931 0.4589 0.4021 0.4646 0.4034 0.4593 0.3944 7C2 7D2 8A2 8B2 8C2 8D2 Region x y 0.4449 0.4141 0.4496 0.4236 0.4562 0.4260 0.4141 0.4513 0.3939 0.4359 0.4403 0.4049 0.4465 0.4071 0.4418 0.3981 0.3981 0.4475 0.4071 0.4523 0.4582 0.4099 0.4532 0.4008 0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 7C3 7D3 8A3 8B3 8C3 8D3 Region x y 0.4403 0.4049 0.4449 0.4141 0.4513 0.4164 0.4164 0.4465 0.4071 0.3960 0.4316 0.3873 0.4359 0.3960 0.4418 0.3981 0.4373 0.3893 0.3994 0.4428 0.3906 0.4085 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919 0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 7C4 7D4 8A4 8B4 8C4 8D4 Performance groups – Voltage XLamp XM-L High Voltage White LEDs are classified into one of the following voltage classes: Forward Voltage Class Minimum Forward Voltage @ 44 mA (V) Tj = 85 °C 0 Maximum Forward Voltage @ 44 mA (V) Tj= 85 °C No voltage bin 1 40.0 42.5 2 42.5 45.0 3 45.0 47.5 4 47.5 50.0 5 50.0 52.5 6 52.5 55.0 Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 6 XLamp ® XM Family LED Binning & Labeling Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve ANSI Cool White 0.40 5000 K 0.39 5700 K 0.38 3S 0.37 6500 K 2T 0.36 0.35 CCy 3B 2S 2C 1T 8000 K 0T 0.33 0C 0B 0.31 3R 2A 1D 2U ANSI C78.377A 2R 1A 1U 0D 0A 0.30 2D 1C 1B 0S 0.32 3A 2B 1S 0.34 1R 0U 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Neutral White 0.44 0.43 3500 K 6T 0.42 4000 K 0.41 5T 0.40 5S 5000 K 0.39 CCy 6S 4500 K 5C2 4T 5B3 5B2 4S 0.38 3T 4C 3S 0.37 5A2 4B 3C 0.36 3B 3D 0.35 4D 4A 5A1 5C1 5B4 5D2 5A3 5A4 5D1 5D3 5D4 6A4 6D3 6D2 6A3 6A2 6A1 6B4 6B1 6C4 6C1 6D4 6D1 6U 6R 5U 5R 4U 3A 0.34 5B1 5C4 6B3 6B2 5C3 6C3 6C2 ANSI C78.377A 4R 3U 3R 0.33 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 CCx Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 7 XLamp ® XM Family LED Binning & Labeling Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve - continued ANSI Neutral White and ANSI warm white 0.46 0.45 2700 K 3000 K 0.44 0.43 3500 K 0.42 4000 K CCy 0.41 6C3 4500 K 6C2 6B3 0.40 6B2 5C3 5000 K 0.39 5B3 5B1 4C 0.37 7A1 7A4 7A3 7D1 7D2 7D4 7D3 8A1 8A3 8A2 8A4 4D 8D1 8B4 8D2 8C2 8C1 8C3 8C4 8D3 8D4 6D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 3C 0.36 6A2 5D3 5A3 5A2 4B 6D2 6A3 5D2 7A2 6D3 6B1 5C4 5C1 5B4 0.38 6C1 6B4 5C2 5B2 6C4 8B1 7C4 7C1 7B4 7B1 7C2 7B3 7B2 8B3 8B2 7C3 5A1 3B 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 8 XLamp ® XM Family LED Binning & Labeling Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions 0.40 0.40 5000 K 0.39 0.38 3S 51 6500 K 0.36 8000 K 6500 K 0T 0C 0B 0A 1U 1R 0U CCy 0.36 0.34 0.28 0.35 0.34 0.33 0.32 0.31 0.30 0.33 0.28 0.36 0.28 0.35 0R 0.29 CCx CCx 0.40 0.40 5000 K 0.39 0.38 0.38 3S 50 6500 K 0.36 6500 K 1U 0.31 1R 0C 0B 1R 0.36 0.30 0.36 0.35 0.34 0.33 0.31 0.29 0.28 0.28 0.28 0.32 0.29 0.30 ANSI C78.377A 2R 1U 0R 0R 0.29 2U 0U 0.30 0.29 0.28 1D 1A 0D 0A 0U 3R 2A 1B 0.35 0A 0.30 0S 0.32 2D 1C 0.34 0.31 ANSI C78.377A 2R 1A 0D 0T 0.33 2U 3A 2B 1S 0.33 0C 0B 3R 1D 2C 8000 K 0.34 3B 2S 1T 0.32 0S 0.32 3A 2D 2A 1B E1 0.35 2B 1C 2T 0.31 0T 0.33 0.36 3B CCy 8000 K 1S 3S 0.37 2C 1T 0.34 5700 K 2T 2S 0.35 5000 K 0.39 5700 K 0.37 CCy ANSI C78.377A 2R 1A 0A 2U 1D 0D 0.30 0R 0.29 0C 0B 0.31 1R 0U 0.29 0.28 0S 0.32 3R 2A 1B 0.32 0.30 1U 2D 1C 0.31 0.31 ANSI C78.377A 2R 1A 0D 0T 0.33 2U 1D 3A 2B 1S 0.30 0S 0.32 8000 K 0.34 3R 2A 1B 3B 2C 1T 3A 2D 1C 3S 2T 2S 0.35 0.29 0.33 0.36 3B 2B 1S 53 0.37 2C 1T 0.34 5700 K 2T 2S 0.35 CCy 0.38 5700 K 0.37 5000 K 0.39 CCx CCx 0.40 5000 K 0.39 0.38 5700 K E2 0.37 6500 K 0.36 3B 2S 0.35 CCy 3S 2T 2C 1T 8000 K 0.34 0T 0.33 0S 0.32 0C 0.31 3R 2A 2U 1D ANSI C78.377A 2R 1A 0D 0A 2D 1C 1B 0B 3A 2B 1S 1U 1R 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 9 XLamp ® XM Family LED Binning & Labeling Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions 0.46 0.45 2700 K 3000 K 0.44 0.43 0.42 4000 K 0.41 E6 4500 K E5 0.40 CCy E7 3500 K 5000 K 0.39 0.38 E3 0.37 E4 5B1 5D3 6D4 7A4 7A1 8B3 8C1 8B4 8C2 8C3 8C4 8D3 8D2 8D4 6A4 6A1 5D4 5D1 ANSI C78.377A 5A4 3B 8B2 6D1 5D2 5A2 3C 5A1 4D 0.36 6D2 6A3 6A2 8D1 8A4 8A1 7D4 7D1 8A3 8A2 7D3 7D2 7A3 7A2 6D3 8B1 7C4 7C1 7B4 7B1 6C1 6B1 5C4 5A3 4B 6C2 6C4 6B4 5C1 5B4 4C 6B2 5C3 5C2 5B3 5B2 6C3 6B3 7C2 7B3 7B2 7C3 E8 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx 0.46 0.45 2700 K 3000 K 0.44 0.43 3500 K 0.42 4000 K 0.41 4500 K CCy 0.40 0.39 F4 0.38 0.37 5C4 5D2 7A2 6D3 6D2 6A3 6A2 5D3 5A3 6C1 6D4 7A1 7A4 7C1 7B4 7B1 6C4 6B4 6B1 5C1 5B1 5A2 4B 7A3 7D1 7D2 7D4 7D3 8A1 8A2 8A4 8A3 8D1 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 4D 3B 5B3 5B4 3C 0.36 5C3 5B2 4C 6C2 8B1 7C4 8B3 8B2 7C3 7C2 7B3 7B2 6B2 5C2 F7 6C3 6B3 F5 5000 K F6 F8 5A1 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 10 XLamp ® XM Family LED Binning & Labeling Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions Continued 0.46 0.45 2700 K 3000 K 0.44 0.43 0.42 Z6 4000 K 0.41 Z5 4500 K 0.40 CCy Z7 3500 K 0.39 5B3 5B1 4C 0.37 6D4 7A1 7A4 7A3 7D1 7D2 7D4 7D3 8A1 8B1 7C4 8A2 8A4 8A3 8D1 4D 8B2 8B3 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 3C 3B 5D3 7A2 6D3 6D2 6A3 6A2 5D2 5A3 5A2 4B 6B1 5C4 5C1 5B4 0.38 6C1 7C1 7B4 7B1 6C4 6B4 5C2 5B2 0.36 6C2 6B2 5C3 5000 K 6C3 6B3 7C2 7B3 7B2 7C3 Z8 5A1 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 11 XLamp ® XM Family LED Binning & Labeling Cree’s Standard Chromaticity Kits The following table provides the chromaticity bins associated with chromaticity kits. Color Cool White Neutral White Warm White * CCT Kit Chromaticity Bins 6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S 6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S 6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D 6500 K E1 1A, 1B, 1C, 1D 5700 K E2 2A, 2B, 2C, 2D 5000 K E3 3A, 3B, 3C, 3D 4750 K F4 3C, 3D, 4A, 4B 4500 K E4 4A, 4B, 4C, 4D 4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 4000 K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 4000 K Z5 5A3, 5B4, 5C1, 5D2 3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 3500 K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 3500 K Z6 6A3, 6B4, 6C1, 6D2 3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 3000 K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 3000 K Z7 7A3, 7B4, 7C1, 7D2 2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 2700 K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 2700 K Z8 8A3, 8B4, 8C1, 8D2 Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 12 XLamp ® XM Family LED Binning & Labeling The following tables of order codes list flux minimums and chromaticity regions for XLamp XM family LEDs. For other flux and chromaticity combinations, contact Cree or an authorized distributor. Standard Order Codes and Bins (XM-L ANSI Cool White, TJ = 25 °C) XLamp XM-L LED Standard Order Codes - White Chromaticity Minimum Luminous Flux (lm) @ 700 mA* Kit Code CCT Flux (lm) Order Codes 65 CRI Typical ANSI Cool White (5000 K – 8300 K) 51 53 50 E1 E2 * 6200 K 6000 K 6200 K 6500 K 5700 K U2 300 XMLAWT-00-0000-0000U2051 T6 280 XMLAWT-00-0000-0000T6051 T5 260 XMLAWT-00-0000-0000T5051 U2 300 XMLAWT-00-0000-0000U2053 T6 280 XMLAWT-00-0000-0000T6053 T5 260 XMLAWT-00-0000-0000T5053 U2 300 XMLAWT-00-0000-0000U2050 T6 280 XMLAWT-00-0000-0000T6050 T5 260 XMLAWT-00-0000-0000T5050 U2 300 XMLAWT-00-0000-0000U20E1 T6 280 XMLAWT-00-0000-0000T60E1 T5 260 XMLAWT-00-0000-0000T50E1 U2 300 XMLAWT-00-0000-0000U20E2 T6 280 XMLAWT-00-0000-0000T60E2 T5 260 XMLAWT-00-0000-0000T50E2 Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 13 XLamp ® XM Family LED Binning & Labeling Standard Order Codes and Bins (XM-L ANSI Neutral White, TJ = 25 °C) XLamp XM-L LED Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 700 mA* Code Flux (lm) Order Codes 75 CRI Typical 80 CRI Minimum ANSI Neutral White (3700 K – 5000 K) E3 F4 4750 K E4 4500 K F5 E5 Z5 * 5000 K 4250 K 4000 K 4000 K T6 280 XMLAWT-00-0000-000LT60E3 T5 260 XMLAWT-00-0000-000LT50E3 T4 240 XMLAWT-00-0000-000LT40E3 T5 260 XMLAWT-00-0000-000LT50F4 T4 240 XMLAWT-00-0000-000LT40F4 T5 260 XMLAWT-00-0000-000LT50E4 T4 240 XMLAWT-00-0000-000LT40E4 T5 260 XMLAWT-00-0000-000LT50F5 T4 240 XMLAWT-00-0000-000LT40F5 T5 260 XMLAWT-00-0000-000LT50E5 T4 240 XMLAWT-00-0000-000LT40E5 XMLAWT-00-0000-000HT40E5 T3 220 XMLAWT-00-0000-000LT30E5 XMLAWT-00-0000-000HT30E5 T4 240 XMLAWT-00-0000-000LT40Z5 T3 220 XMLAWT-00-0000-000LT30Z5 XMLAWT-00-0000-000HT30Z5 Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 14 XLamp ® XM Family LED Binning & Labeling Standard Order Codes and Bins (XM-L ANSI Warm White, TJ = 25 °C) XLamp XM-L LED Standard Kit Codes - White Chromaticity Minimum Luminous Flux (lm) @ 700 mA* Kit Code Flux (lm) 80 CRI Typical T4 240 XMLAWT-00-0000-000LT40F6 XMLAWT-00-0000-000HT40F6 T3 220 XMLAWT-00-0000-000LT30F6 XMLAWT-00-0000-000HT30F6 T2 200 XMLAWT-00-0000-000LT20F6 XMLAWT-00-0000-000HT20F6 T4 240 XMLAWT-00-0000-000LT40E6 XMLAWT-00-0000-000HT40E6 T3 220 XMLAWT-00-0000-000LT30E6 XMLAWT-00-0000-000HT30E6 T2 200 XMLAWT-00-0000-000LT20E6 XMLAWT-00-0000-000HT20E6 T3 220 XMLAWT-00-0000-000LT30Z6 XMLAWT-00-0000-000HT30Z6 T2 200 XMLAWT-00-0000-000LT20Z6 XMLAWT-00-0000-000HT20Z6 T3 220 XMLAWT-00-0000-000LT30F7 XMLAWT-00-0000-000HT30F7 T2 200 XMLAWT-00-0000-000LT20F7 XMLAWT-00-0000-000HT20F7 T3 220 XMLAWT-00-0000-000LT30E7 XMLAWT-00-0000-000HT30E7 T2 200 XMLAWT-00-0000-000LT20E7 XMLAWT-00-0000-000HT20E7 CCT Order Codes 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum ANSI Warm White (2700 K - 3750 K) F6 E6 Z6 F7 E7 Z7 F8 E8 Z8 * 3750 K 3500 K 3500 K 3250 K 3000 K 3000 K 2850 K 2700 K 2700 K S6 182 XMLAWT-00-0000-000PS60E7 XMLAWT-00-0000-000US60E7 S5 172 XMLAWT-00-0000-000PS50E7 XMLAWT-00-0000-000US50E7 S4 164 XMLAWT-00-0000-000PS40E7 XMLAWT-00-0000-000US40E7 T3 220 XMLAWT-00-0000-000LT30Z7 XMLAWT-00-0000-000HT30Z7 T2 200 XMLAWT-00-0000-000LT20Z7 XMLAWT-00-0000-000HT20Z7 S6 182 S5 172 XMLAWT-00-0000-000PS50Z7 XMLAWT-00-0000-000US50Z7 XMLAWT-00-0000-000PS40Z7 XMLAWT-00-0000-000US40Z7 S4 164 T2 200 XMLAWT-00-0000-000LT20F8 XMLAWT-00-0000-000HT20F8 S6 182 XMLAWT-00-0000-000LS60F8 XMLAWT-00-0000-000HS60F8 S5 172 XMLAWT-00-0000-000PS50F8 XMLAWT-00-0000-000US50F8 S4 164 XMLAWT-00-0000-000PS40F8 XMLAWT-00-0000-000US40F8 S3 156 XMLAWT-00-0000-000PS30F8 XMLAWT-00-0000-000US30F8 T2 200 XMLAWT-00-0000-000LT20E8 XMLAWT-00-0000-000HT20E8 S6 182 XMLAWT-00-0000-000LS60E8 XMLAWT-00-0000-000HS60E8 S5 172 XMLAWT-00-0000-000PS50E8 XMLAWT-00-0000-000US50E8 S4 164 XMLAWT-00-0000-000PS40E8 XMLAWT-00-0000-000US40E8 S3 156 XMLAWT-00-0000-000PS30E8 XMLAWT-00-0000-000US30E8 T2 200 XMLAWT-00-0000-000LT20Z8 XMLAWT-00-0000-000HT20Z8 S6 182 XMLAWT-00-0000-000LS60Z8 XMLAWT-00-0000-000HS60Z8 S5 172 S4 164 XMLAWT-00-0000-000PS40Z8 XMLAWT-00-0000-000US40Z8 S3 156 XMLAWT-00-0000-000PS30Z8 XMLAWT-00-0000-000US30Z8 Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 15 XLamp ® XM Family LED Binning & Labeling Standard Order Codes and Bins (XM-L2 ANSI Cool White, TJ = 85 °C) XLamp XM-L2 LED Standard Order Codes - White Chromaticity Minimum Luminous Flux (lm) @ 700 mA* Kit Code CCT Flux (lm) Order Codes 65 CRI Typical 85 CRI Minimum ANSI Cool White (5000 K – 8300 K) 51 53 50 E1 E2 * 6200 K 6000 K 6200 K 6500 K 5700 K U3 320 XMLBWT-00-0000-0000U3051 U2 300 XMLBWT-00-0000-0000U2051 T6 280 XMLBWT-00-0000-0000T6051 T5 260 XMLBWT-00-0000-0000T5051 T4 240 XMLBWT-00-0000-000PT4051 T3 220 XMLBWT-00-0000-000PT3051 T2 200 U3 320 XMLBWT-00-0000-0000U3053 U2 300 XMLBWT-00-0000-0000U2053 T6 280 XMLBWT-00-0000-0000T6053 T5 260 XMLBWT-00-0000-0000T5053 T4 240 XMLBWT-00-0000-000PT4053 T3 220 XMLBWT-00-0000-000PT3053 T2 200 XMLBWT-00-0000-000PT2053 U3 320 XMLBWT-00-0000-0000U3050 U2 300 XMLBWT-00-0000-0000U2050 T6 280 XMLBWT-00-0000-0000T6050 T5 260 XMLBWT-00-0000-0000T5050 T4 240 XMLBWT-00-0000-000PT4050 T3 220 XMLBWT-00-0000-000PT3050 T2 200 XMLBWT-00-0000-000PT2050 XMLBWT-00-0000-000PT2051 U3 320 XMLBWT-00-0000-0000U30E1 U2 300 XMLBWT-00-0000-0000U20E1 T6 280 XMLBWT-00-0000-0000T60E1 XMLBWT-00-0000-0000T50E1 T5 260 T4 240 XMLBWT-00-0000-000PT40E1 T3 220 XMLBWT-00-0000-000PT30E1 T2 200 U3 320 XMLBWT-00-0000-0000U30E2 XMLBWT-00-0000-000PT20E1 U2 300 XMLBWT-00-0000-0000U20E2 T6 280 XMLBWT-00-0000-0000T60E2 T5 260 XMLBWT-00-0000-0000T50E2 T4 240 XMLBWT-00-0000-000PT40E2 T3 220 XMLBWT-00-0000-000PT30E2 T2 200 XMLBWT-00-0000-000PT20E2 Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 16 XLamp ® XM Family LED Binning & Labeling Standard Order Codes and Bins (XM-L2 ANSI Neutral White, TJ = 85 °C) XLamp XM-L2 LED Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 700 mA* Code Flux (lm) Order Codes 70 CRI Minimum 75 CRI Typical 80 CRI Minimum ANSI Neutral White (3700 K – 5000 K) E3 F4 E4 F5 E5 Z5 * 5000 K 4750 K 4500 K 4250 K 4000 K 4000 K U3 320 XMLBWT-00-0000-000BU30E3 U2 300 XMLBWT-00-0000-000BU20E3 XMLBWT-00-0000-000LU20E3 T6 280 XMLBWT-00-0000-000BT60E3 XMLBWT-00-0000-000LT60E3 T5 260 XMLBWT-00-0000-000BT50E3 XMLBWT-00-0000-000LT50E3 T4 240 U3 320 XMLBWT-00-0000-000BU30F4 U2 300 XMLBWT-00-0000-000BU20F4 XMLBWT-00-0000-000LU20F4 T6 280 XMLBWT-00-0000-000BT60F4 XMLBWT-00-0000-000LT60F4 T5 260 XMLBWT-00-0000-000BT50F4 XMLBWT-00-0000-000LT50F4 T4 240 U3 320 XMLBWT-00-0000-000BU30E4 U2 300 XMLBWT-00-0000-000BU20E4 XMLBWT-00-0000-000LU20E4 T6 280 XMLBWT-00-0000-000BT60E4 XMLBWT-00-0000-000LT60E4 T5 260 XMLBWT-00-0000-000BT50E4 XMLBWT-00-0000-000LT50E4 XMLBWT-00-0000-000LT40E3 XMLBWT-00-0000-000LT40F4 T4 240 U2 300 XMLBWT-00-0000-000BU20F5 XMLBWT-00-0000-000LT40E4 T6 280 XMLBWT-00-0000-000BT60F5 XMLBWT-00-0000-000LT60F5 T5 260 XMLBWT-00-0000-000BT50F5 XMLBWT-00-0000-000LT50F5 XMLBWT-00-0000-000LT40F5 T4 240 XMLBWT-00-0000-000BT40F5 U2 300 XMLBWT-00-0000-000BU20E5 T6 280 XMLBWT-00-0000-000BT60E5 XMLBWT-00-0000-000LT60E5 XMLBWT-00-0000-000HT60E5 T5 260 XMLBWT-00-0000-000BT50E5 XMLBWT-00-0000-000LT50E5 XMLBWT-00-0000-000HT50E5 T4 240 XMLBWT-00-0000-000BT40E5 XMLBWT-00-0000-000LT40E5 XMLBWT-00-0000-000HT40E5 T3 220 XMLBWT-00-0000-000LT30E5 XMLBWT-00-0000-000HT30E5 T5 260 XMLBWT-00-0000-000LT50Z5 XMLBWT-00-0000-000HT50Z5 T4 240 XMLBWT-00-0000-000LT40Z5 XMLBWT-00-0000-000HT40Z5 T3 220 XMLBWT-00-0000-000LT30Z5 XMLBWT-00-0000-000HT30Z5 Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 17 XLamp ® XM Family LED Binning & Labeling Standard Order Codes and Bins (XM-L2 ANSI Warm White, TJ = 85 °C) XLamp XM-L2 LED Standard Kit Codes - White Chromaticity Minimum Luminous Flux (lm) @ 700 mA* Kit Code CCT Flux (lm) Order Codes 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum XMLBWT-00-0000-000PT20E7 XMLBWT-00-0000-000UT20E7 ANSI Warm White (2700 K - 3750 K) F6 E6 Z6 F7 E7 Z7 * 3750 K 3500 K 3500 K 3250 K 3000 K 3000 K T6 280 XMLBWT-00-0000-000LT60F6 XMLBWT-00-0000-000HT60F6 T5 260 XMLBWT-00-0000-000LT50F6 XMLBWT-00-0000-000HT50F6 T4 240 XMLBWT-00-0000-000LT40F6 XMLBWT-00-0000-000HT40F6 T3 220 XMLBWT-00-0000-000LT30F6 XMLBWT-00-0000-000HT30F6 T2 200 XMLBWT-00-0000-000LT20F6 XMLBWT-00-0000-000HT20F6 T6 280 XMLBWT-00-0000-000LT60E6 XMLBWT-00-0000-000HT60E6 T5 260 XMLBWT-00-0000-000LT50E6 XMLBWT-00-0000-000HT50E6 T4 240 XMLBWT-00-0000-000LT40E6 XMLBWT-00-0000-000HT40E6 T3 220 XMLBWT-00-0000-000LT30E6 XMLBWT-00-0000-000HT30E6 T2 200 XMLBWT-00-0000-000LT20E6 XMLBWT-00-0000-000HT20E6 T5 260 XMLBWT-00-0000-000LT50Z6 XMLBWT-00-0000-000HT50Z6 T4 240 XMLBWT-00-0000-000LT40Z6 XMLBWT-00-0000-000HT40Z6 T3 220 XMLBWT-00-0000-000LT30Z6 XMLBWT-00-0000-000HT30Z6 T2 200 XMLBWT-00-0000-000LT20Z6 XMLBWT-00-0000-000HT20Z6 T5 260 XMLBWT-00-0000-000LT50F7 XMLBWT-00-0000-000HT50F7 T4 240 XMLBWT-00-0000-000LT40F7 XMLBWT-00-0000-000HT40F7 T3 220 XMLBWT-00-0000-000LT30F7 XMLBWT-00-0000-000HT30F7 T2 200 XMLBWT-00-0000-000LT20F7 XMLBWT-00-0000-000HT20F7 T5 260 XMLBWT-00-0000-000LT50E7 XMLBWT-00-0000-000HT50E7 T4 240 XMLBWT-00-0000-000LT40E7 XMLBWT-00-0000-000HT40E7 T3 220 XMLBWT-00-0000-000LT30E7 XMLBWT-00-0000-000HT30E7 T2 200 XMLBWT-00-0000-000LT20E7 XMLBWT-00-0000-000HT20E7 S6 182 XMLBWT-00-0000-000PS60E7 XMLBWT-00-0000-000US60E7 S5 172 XMLBWT-00-0000-000PS50E7 XMLBWT-00-0000-000US50E7 XMLBWT-00-0000-000PS40E7 XMLBWT-00-0000-000US40E7 S4 164 T4 240 XMLBWT-00-0000-000LT40Z7 XMLBWT-00-0000-000HT40Z7 T3 220 XMLBWT-00-0000-000LT30Z7 XMLBWT-00-0000-000HT30Z7 T2 200 XMLBWT-00-0000-000LT20Z7 XMLBWT-00-0000-000HT20Z7 S6 182 XMLBWT-00-0000-000PS60Z7 XMLBWT-00-0000-000US60Z7 S5 172 XMLBWT-00-0000-000PS50Z7 XMLBWT-00-0000-000US50Z7 S4 164 XMLBWT-00-0000-000PS40Z7 XMLBWT-00-0000-000US40Z7 Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 18 XLamp ® XM Family LED Binning & Labeling Standard Order Codes and Bins (XM-L2 ANSI Warm White, TJ = 85 °C) - Continued XLamp XM-L2 LED Standard Kit Codes - White Chromaticity Minimum Luminous Flux (lm) @ 700 mA* Kit Code Flux (lm) 80 CRI Typical T5 260 XMLBWT-00-0000-000LT50F8 XMLBWT-00-0000-000HT50F8 T4 240 XMLBWT-00-0000-000LT40F8 XMLBWT-00-0000-000HT40F8 CCT Order Codes 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum XMLBWT-00-0000-000PS60F8 XMLBWT-00-0000-000US60F8 XMLBWT-00-0000-000US50F8 ANSI Warm White (2700 K - 3750 K) F8 E8 Z8 * 2850 K 2700 K 2700 K T3 220 XMLBWT-00-0000-000LT30F8 XMLBWT-00-0000-000LT30F8 T2 200 XMLBWT-00-0000-000LT20F8 XMLBWT-00-0000-000HT20F8 S6 182 XMLBWT-00-0000-000LS60F8 XMLBWT-00-0000-000HS60F8 S5 172 XMLBWT-00-0000-000PS50F8 S4 164 XMLBWT-00-0000-000PS40F8 XMLBWT-00-0000-000US40F8 S3 156 XMLBWT-00-0000-000PS30F8 XMLBWT-00-0000-000US30F8 T5 260 XMLBWT-00-0000-000LT50E8 XMLBWT-00-0000-000HT50E8 T4 240 XMLBWT-00-0000-000LT40E8 XMLBWT-00-0000-000HT40E8 T3 220 XMLBWT-00-0000-000LT30E8 XMLBWT-00-0000-000HT30E8 T2 200 XMLBWT-00-0000-000LT20E8 XMLBWT-00-0000-000HT20E8 XMLBWT-00-0000-000LS60E8 XMLBWT-00-0000-000HS60E8 S6 182 XMLBWT-00-0000-000PS60E8 XMLBWT-00-0000-000US60E8 S5 172 XMLBWT-00-0000-000PS50E8 XMLBWT-00-0000-000US50E8 S4 164 XMLBWT-00-0000-000PS40E8 XMLBWT-00-0000-000US40E8 XMLBWT-00-0000-000PS30E8 XMLBWT-00-0000-000US30E8 S3 156 T4 240 XMLBWT-00-0000-000LT40Z8 XMLBWT-00-0000-000HT40Z8 T3 220 XMLBWT-00-0000-000LT30Z8 XMLBWT-00-0000-000HT30Z8 T2 200 XMLBWT-00-0000-000LT20Z8 XMLBWT-00-0000-000HT20Z8 S6 182 XMLBWT-00-0000-000LS60Z8 XMLBWT-00-0000-000HS60Z8 S5 172 XMLBWT-00-0000-000PS50Z8 XMLBWT-00-0000-000US50Z8 S4 164 XMLBWT-00-0000-000PS40Z8 XMLBWT-00-0000-000US40Z8 S3 156 XMLBWT-00-0000-000PS30Z8 XMLBWT-00-0000-000US30Z8 Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 19 XLamp ® XM Family LED Binning & Labeling Standard Order Codes and Bins (XM-L High Voltage ANSI Cool White, TJ = 85 °C) XLamp XM-L HVW LED Standard Order Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 44 mA* Code Flux (lm) Order Codes 65 CRI Typical ANSI Cool White (5000 K – 8300 K) 51 53 50 * 6200 K 6000 K 6200 K T5 260 XMLHVW-Q0-0000-0000LT551 T4 240 XMLHVW-Q0-0000-0000LT451 T3 220 XMLHVW-Q0-0000-0000LT351 T2 200 XMLHVW-Q0-0000-0000LT251 T5 260 XMLHVW-Q0-0000-0000LT553 T4 240 XMLHVW-Q0-0000-0000LT453 T3 220 XMLHVW-Q0-0000-0000LT353 T2 200 XMLHVW-Q0-0000-0000LT253 T5 260 XMLHVW-Q0-0000-0000LT550 T4 240 XMLHVW-Q0-0000-0000LT450 T3 220 XMLHVW-Q0-0000-0000LT350 T2 200 XMLHVW-Q0-0000-0000LT250 Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 20 XLamp ® XM Family LED Binning & Labeling Standard Order Codes and Bins (XM-L High Voltage ANSI Neutral White, TJ = 85 °C) XLamp XM-L HVW LED Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 44 mA* Code Flux (lm) Order Codes 75 CRI Typical 80 CRI Minimum ANSI Neutral White (3700 K – 5000 K) E3 F4 E4 F5 E5 * 5000 K 4750 K 4500 K 4250 K 4000 K T5 260 XMLHVW-Q0-0000-0000LT5E3 T4 240 XMLHVW-Q0-0000-0000LT4E3 T3 220 XMLHVW-Q0-0000-0000LT3E3 T2 200 XMLHVW-Q0-0000-0000LT2E3 S6 182 XMLHVW-Q0-0000-0000LS6E3 T5 260 XMLHVW-Q0-0000-0000LT5F4 T4 240 XMLHVW-Q0-0000-0000LT4F4 T3 220 XMLHVW-Q0-0000-0000LT3F4 T2 200 XMLHVW-Q0-0000-0000LT2F4 S6 182 XMLHVW-Q0-0000-0000LS6F4 T5 260 XMLHVW-Q0-0000-0000LT5E4 T4 240 XMLHVW-Q0-0000-0000LT4E4 T3 220 XMLHVW-Q0-0000-0000LT3E4 T2 200 XMLHVW-Q0-0000-0000LT2E4 S6 182 XMLHVW-Q0-0000-0000LS6E4 T3 220 XMLHVW-Q0-0000-0000LT3F5 T2 200 XMLHVW-Q0-0000-0000LT2F5 XMLHVW-Q0-0000-0000HT2F5 S6 182 XMLHVW-Q0-0000-0000LS6F5 XMLHVW-Q0-0000-0000HS6F5 XMLHVW-Q0-0000-0000HS5F5 S5 172 XMLHVW-Q0-0000-0000LS5F5 T3 220 XMLHVW-Q0-0000-0000LT3E5 T2 200 XMLHVW-Q0-0000-0000LT2E5 XMLHVW-Q0-0000-0000HT2E5 S6 182 XMLHVW-Q0-0000-0000LS6E5 XMLHVW-Q0-0000-0000HS6E5 S5 172 XMLHVW-Q0-0000-0000LS5E5 XMLHVW-Q0-0000-0000HS5E5 Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 21 XLamp ® XM Family LED Binning & Labeling Standard Order Codes and Bins (XM-L High Voltage ANSI Warm White, TJ = 85 °C) XLamp XM-L HVW LED Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 44 mA* Code Flux (lm) Order Codes 80 CRI Typical 80 CRI Minimum ANSI Warm White (2700 K - 3750 K) F6 E6 F7 E7 F8 E8 * 3750 K 3500 K 3250 K 3000 K 2850 K 2700 K T3 220 XMLHVW-Q0-0000-0000LT3F6 T2 200 XMLHVW-Q0-0000-0000LT2F6 XMLHVW-Q0-0000-0000HT2F6 S6 182 XMLHVW-Q0-0000-0000LS6F6 XMLHVW-Q0-0000-0000HS6F6 S5 172 XMLHVW-Q0-0000-0000LS5F6 XMLHVW-Q0-0000-0000HS5F6 S4 164 XMLHVW-Q0-0000-0000LS4F6 XMLHVW-Q0-0000-0000HS4F6 T3 220 XMLHVW-Q0-0000-0000LT3E6 T2 200 XMLHVW-Q0-0000-0000LT2E6 XMLHVW-Q0-0000-0000HT2E6 S6 182 XMLHVW-Q0-0000-0000LS6E6 XMLHVW-Q0-0000-0000HS6E6 S5 172 XMLHVW-Q0-0000-0000LS5E6 XMLHVW-Q0-0000-0000HS5E6 S4 164 XMLHVW-Q0-0000-0000LS4E6 XMLHVW-Q0-0000-0000HS4E6 T3 220 XMLHVW-Q0-0000-0000LT3F7 T2 200 XMLHVW-Q0-0000-0000LT2F7 XMLHVW-Q0-0000-0000HT2F7 S6 182 XMLHVW-Q0-0000-0000LS6F7 XMLHVW-Q0-0000-0000HS6F7 S5 172 XMLHVW-Q0-0000-0000LS5F7 XMLHVW-Q0-0000-0000HS5F7 S4 164 XMLHVW-Q0-0000-0000LS4F7 XMLHVW-Q0-0000-0000HS4F7 S3 156 XMLHVW-Q0-0000-0000LS3F7 XMLHVW-Q0-0000-0000HS3F7 T3 220 XMLHVW-Q0-0000-0000LT3E7 T2 200 XMLHVW-Q0-0000-0000LT2E7 XMLHVW-Q0-0000-0000HT2E7 S6 182 XMLHVW-Q0-0000-0000LS6E7 XMLHVW-Q0-0000-0000HS6E7 S5 172 XMLHVW-Q0-0000-0000LS5E7 XMLHVW-Q0-0000-0000HS5E7 S4 164 XMLHVW-Q0-0000-0000LS4E7 XMLHVW-Q0-0000-0000HS4E7 S3 156 XMLHVW-Q0-0000-0000LS3E7 XMLHVW-Q0-0000-0000HS3E7 S6 182 XMLHVW-Q0-0000-0000LS6F8 XMLHVW-Q0-0000-0000HS6F8 S5 172 XMLHVW-Q0-0000-0000LS5F8 XMLHVW-Q0-0000-0000HS5F8 S4 164 XMLHVW-Q0-0000-0000LS4F8 XMLHVW-Q0-0000-0000HS4F8 S3 156 XMLHVW-Q0-0000-0000LS3F8 XMLHVW-Q0-0000-0000HS3F8 S2 148 XMLHVW-Q0-0000-0000LS2F8 XMLHVW-Q0-0000-0000HS2F8 S6 182 XMLHVW-Q0-0000-0000LS6E8 XMLHVW-Q0-0000-0000HS6E8 S5 172 XMLHVW-Q0-0000-0000LS5E8 XMLHVW-Q0-0000-0000HS5E8 S4 164 XMLHVW-Q0-0000-0000LS4E8 XMLHVW-Q0-0000-0000HS4E8 S3 156 XMLHVW-Q0-0000-0000LS3E8 XMLHVW-Q0-0000-0000HS3E8 S2 148 XMLHVW-Q0-0000-0000LS2E8 XMLHVW-Q0-0000-0000HS2E8 Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 22