LP2500E0805AT LOW PASS FILTER SPECIFICATION Rev. A PRODUCT FEATURES 1. Surface mount low pass filter with a small size of 2.00 X 1.25 X 1.05 mm, RoHS compliant. 2. Provide low insertion loss and high rejection rate. 3. Highly stable under temperature and humidity changes. RF CHARACTERISTICS PHYSICAL DIMENSIONS P/N LP2500E0805AT Specification Symbol Dimension (mm) L 2.00 ± 0.15 Frequency range 2400-2500 MHz Insertion Loss (max) 0.7 dB max VSWR 1.5 max W 1.25 ± 0.10 Impedance 50 Ω T 1.05 ± 0.10 Attenuation (min.) 30 dB @ 2 x (f 0 ± BW/2) 25 dB @ 3 x (f 0 ± BW/2) A,B,C,E 0.30 ± 0.10 D 0.25 ± 0.15 Operating temperature range -40°C to +85°C F 0.20 ± 0.10 G 0.25 ± 0.15 P 0.65 ± 0.10 TERMINAL CONFIGURATION P2 P1 P3 P4 P8 P5 P7 PIN Definition PIN Definition P1 Input/Output P5 Output/Input P2 GND P6 GND P3 GND P7 GND P4 GND P8 GND P6 PCB DESIGN/LAYOUT CONSIDERATION Note: - Unit in mils - Design trace width to be 50Ω impedance. Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 LP2500E0805AT LOW PASS FILTER SPECIFICATION Rev. A Typical RF Performance Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989