BP2500C0805BT BAND PASS FILTER SPECIFICATION Rev. A PRODUCT FEATURES 1. Surface mount band pass filter with a small size of 2.0 X 1.2 X 0.55 mm, RoHS compliant. 2. Provide low insertion loss and high rejection rate. 3. Highly stable under temperature and humidity changes. RF CHARACTERISTICS PHYSICAL DIMENSIONS P/N BP2500C0805BT Specification Symbol Dimension (mm) 2.0 max L 2.0 ± 0.2 50 Ω W 1.2 ± 0.2 35 dB @ 824-960 MHz T 0.55 ± 0.10 38 dB @ 1710-1910 MHz A 0.4 ± 0.2 B 0.4 ± 0.2 C 0.4 ± 0.2 D 0.2 ± 0.1 Frequency range 2400 - 2500 MHz Insertion Loss (max) 2.5 dB max VSWR Impedance Attenuation (min.) 25 dB @ 4880-5000 MHz Operating temperature range 20 dB @ 7200-7500 MHz -40°C to +85°C TERMINAL CONFIGURATION P1 P2 P3 P6 P5 PIN Definition PIN Definition P1 GND P4 GND P2 INPUT P5 OUTPUT P3 GND P6 GND P4 Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 BP2500C0805BT BAND PASS FILTER SPECIFICATION Rev. A PCB DESIGN/LAYOUT CONSIDERATION Figure Design line width to be 50 Ω impedance. Symbol Dimension (mm) L1 1.40 ± 0.10 L2 0.45 ± 0.05 L3 0.65 ± 0.05 W1 1.00 ± 0.10 W2 1.10 ± 0.10 W3 0.70 ± 0.05 W4 0.43 ± 0.05 W5 0.60 ± 0.05 D1 0.25 ± 0.05 D2 0.40 ± 0.05 S 0.23 ± 0.05 D1 and D2 are via holes connect to ground plane. Typical RF Performance Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989