POSEICO SPA Via Pillea 42-44, 16153 Genova - ITALY Tel. + 39 010 8599400 - Fax + 39 010 8682006 Sales Office: Tel. + 39 010 8599400 - Fax + 39 010 8681180 POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation PHASE CONTROL THYRISTOR AT737 Repetitive voltage up to Mean forward current Surge current 2000 V 3239 A 50.4 kA FINAL SPECIFICATION May 06 - Issue: 03 Symbol Characteristic Tj [°C] Conditions Value Unit BLOCKING V RRM Repetitive peak reverse voltage 125 2000 V V RSM Non-repetitive peak reverse voltage 125 2100 V V DRM Repetitive peak off-state voltage 125 2000 V I RRM Repetitive peak reverse current V=VRRM 125 200 mA I DRM Repetitive peak off-state current V=VRRM 125 200 mA I T (AV) Mean forward current 180° sin ,50 Hz, Th=55°C, doub le side cooled 3239 A I T (AV) Mean forward current 180° sin ,50 Hz, Tc=85°C, doubl e side cooled I TSM Surge forward current CONDUCTING 125 2544 A 50.4 kA I² t I² t Sine wave, 10 ms without reverse voltage V T On-state voltage On-state current = V T(TO) Threshold voltage 125 0.95 V r T On-state slope resistance 125 0.127 mohm 3 12701 x 10 6300 A 25 1.65 A²s V SWITCHING di/dt Critical rate of rise of on-state current, min. From 75% VDRM up to 3550 A; gate 10V, 5Ω 125 200 A/µs dv/dt Critical rate of rise of off-state voltage, min. Linear ramp up to 70% of VDRM 125 500 V/µs t d Gate controlled delay time, typical VD=100V; gate source 25V, 10Ω , tr=.5 µs 25 t q Circuit commutated turn-off time, typical dv/dt = 20 V/µs linear up to 75% VDRM Q rr Reverse recovery charge di/dt = -20 A/µs, I= 2330 A I rr Peak reverse recovery current VR= 50 V I H Holding current, typical VD=5V, gate open circuit 25 300 mA I L Latching current, typical VD=5V, tp=30µs 25 700 mA V GT Gate trigger voltage VD=5V 25 3.50 V I GT Gate trigger current VD=5V 25 350 mA V GD Non-trigger gate voltage, min. VD=VDRM 125 0.25 V V FGM Peak gate voltage (forward) 30 V I FGM Peak gate current 10 A V RGM Peak gate voltage (reverse) 5 V P GM Peak gate power dissipation P G Average gate power dissipation R th(j-h) Thermal impedance, DC Junction to heatsink, double side cooled R th(c-h) Thermal impedance Case to heatsink, double side cooled T j Operating junction temperature 3 µs 320 µs 125 µC A GATE Pulse width 100 µs 150 W 2 W MOUNTING F 11 °C/kW 2 °C/kW -30 / 125 °C Mounting force 40.0 / 50.0 kN Mass 1700 ORDERING INFORMATION : AT737 S 20 standard specification VRRM/100 g POSEICO AT737 PHASE CONTROL THYRISTOR POSEICO SPA POwer SEmiconductors Italian COrporation FINAL SPECIFICATION May 06 - Issue: 03 DISSIPATION CHARACTERISTICS SQUARE WAVE Th [°C] 130 120 110 100 90 80 70 60 50 30° 60° 90° 120° 180° DC 40 0 1000 2000 3000 4000 5000 IF(AV) [A] PF(AV) [W] 7000 DC 180° 6000 120° 60° 5000 90° 30° 4000 3000 2000 1000 0 0 500 1000 1500 2000 IF(AV) [A] 2500 3000 3500 4000 4500 AT737 PHASE CONTROL THYRISTOR POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation FINAL SPECIFICATION May 06 - Issue: 03 DISSIPATION CHARACTERISTICS SINE WAVE Th [°C] 130 120 110 100 90 80 70 60 50 30° 60° 90° 120° 180° 40 0 500 1000 1500 2000 2500 3000 3500 IF(AV) [A] PF(AV) [W] 7000 180° 120° 6000 60° 90° 30° 5000 4000 3000 2000 1000 0 0 500 1000 1500 IF(AV) [A] 2000 2500 3000 3500 POSEICO AT737 PHASE CONTROL THYRISTOR POSEICO SPA POwer SEmiconductors Italian COrporation FINAL SPECIFICATION May 06 - Issue: 03 SURGE CHARACTERISTIC Tj = 125 °C 12000 60 10000 50 8000 40 ITSM [kA] Forward Current [A] FORWARD CHARACTERISTIC Tj = 125 °C 6000 30 4000 20 2000 10 0 0 0 0,5 1 1,5 2 2,5 1 Forward Voltage [V] 10 n°cycles TRANSIENT THERMAL IMPEDANCE DOUBLE SIDE COOLED 12 10 Zth j-h [°C/kW] 8 6 4 2 0 0,001 0,01 0,1 1 t[s] 10 Cathode terminal type DIN 46244 - A 4.8 - 0.8 Gate terminal type AMP 60598 - 1 Distributed by All the characteristics given in this data sheet are guaranteed only with uniform clamping force, cleaned and lubricated heatsink, surfaces with flatness < .03 mm and roughness < 2 µm. In the interest of product improvement POSEICO SpA reserves the right to change any data given in this data sheet at any time without previous notice. If not stated otherwise the maximum value of ratings (simbols over shaded background) and characteristics is reported. 100