V I S H AY I N T E R T E C H N O L O GY, I N C . INTERACTIVE data book LOW VOLTAGE POWER CAPACITORS ViShAy ESTA Notes: 1. To navigate: a) Click on the Vishay logo in any document to go to the overview page. b) Click on the document name within the overview to go directly to the document. c) Use the scroll or page up / page down functions. d) Use the Adobe ® Acrobat ® page function in the browser bar. 2. To search the text of the catalog, use the Adobe ® Acrobat ® search function. One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components VSE-DB0052-1406 V I SHAY I NTE RTE CHNO L O GY, IN C . Low Voltage Power Capacitors ESTAprop, ESTAdry • PhMKP, PhMKPg..., Cylindrical, LVAC • PhMKDg ..., Triangular, LVAC • PhMKP..., Rectangular, LVAC • PhMKP.../-DW, LVAC One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components DATA BOOK VSE-DB0052-1406 PowEr CAPACiTorS Vishay ESTA SEMiCoNDUCTorS MoSFETS SEGMENT MOSFETs Low-Voltage TrenchFET® Power MOSFETs Medium-Voltage Power MOSFETs High-Voltage Planar MOSFETs High-Voltage Super Junction MOSFETs Automotive-Grade MOSFETs ICs Power Management and Power Control ICs Smart Load Switches Analog Switches and Multiplexers PRODUCT LISTINGS DioDES SEGMENT Rectifiers Schottky Rectifiers Ultra-Fast Recovery Rectifiers Standard and Fast Recovery Rectifiers High-Power Rectifiers/Diodes Bridge Rectifiers Small-Signal Diodes Schottky and Switching Diodes Zener Diodes Tuner/Capacitance Diodes Bandswitching Diodes RF PIN Diodes Protection Diodes TVS Diodes or TRANSZORB® (uni-directional, bi-directional) ESD Protection Diodes (including arrays) Thyristors/SCRs Phase-Control Thyristors Fast Thyristors Power Modules Input Modules (diodes and thyristors) Output and Switching Modules (contain MOSFETs, IGBTs, and diodes) Custom Modules oPToELECTroNiC CoMPoNENTS SEGMENT Infrared Emitters and Detectors Optical Sensors Infrared Remote Control Receivers Optocouplers Phototransistor, Photodarlington Linear Phototriac High-Speed IGBT and MOSFET Driver Solid-State Relays LEDs and 7-Segment Displays Infrared Data Transceiver Modules Custom Products PASSiVE CoMPoNENTS rESiSTorS AND iNDUCTorS SEGMENT Film Resistors Metal Film Resistors Thin Film Resistors Thick Film Resistors Metal Oxide Film Resistors Carbon Film Resistors Wirewound Resistors Vitreous, Cemented, and Housed Resistors Braking and Neutral Grounding Resistors Custom Load Banks Power Metal Strip® Resistors Chip Fuses Variable Resistors Cermet Variable Resistors Wirewound Variable Resistors Conductive Plastic Variable Resistors Contactless Potentiometers Networks/Arrays Non-Linear Resistors NTC Thermistors PTC Thermistors Varistors Magnetics Inductors Transformers Coils Connectors CAPACiTorS SEGMENT Tantalum Capacitors Molded Chip Tantalum Capacitors Coated Chip Tantalum Capacitors Solid Through-Hole Tantalum Capacitors Wet Tantalum Capacitors Ceramic Capacitors Multilayer Chip Capacitors Disc Capacitors Film Capacitors Power Capacitors Heavy-Current Capacitors Aluminum Capacitors Low Voltage Power Capacitors Vishay ESTA Vishay Electronic GmbH ESTA Capacitors Division Hofmark-Aich-Strasse 36 D-84030 Landshut Germany Phone: +49 871 860 Fax: +49 871 862512 www.vishay.com DISCLAIMER ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Table of Contents www.vishay.com Vishay ESTA Low Voltage Power Capacitors GENERAL TECHNICAL INFORMATION MKP-technology...................................................................................................................................................................... Self-healing.............................................................................................................................................................................. Filling agent (ESTAprop, ESTAdry)........................................................................................................................................... Providing the winding element with electronic contacts.......................................................................................................... Overpressure tear-off fuse ...................................................................................................................................................... Characteristics of dielectric ..................................................................................................................................................... CE-marking.............................................................................................................................................................................. UL- and ULC-marking ............................................................................................................................................................. 3 3 3 3 4 4 4 4 TERMS AND DEFINITIONS, APPLICABLE STANDARDS Definition of ratings.................................................................................................................................................................. Maximum permissible current ................................................................................................................................................. Maximum permissible voltage................................................................................................................................................. Harmonic distortion ................................................................................................................................................................. Damping of inrush current ....................................................................................................................................................... Operating temperatures .......................................................................................................................................................... Degree of protection, IP code ................................................................................................................................................. 5 5 5 5 5 6 6 CALCULATION AND TABLES Capacitor selection table for power factor correction of electrical motors ............................................................................. 7 Capacitor selection table for power factor correction of transformers ................................................................................... 7 Calculation and selection of required capacitor rating............................................................................................................ 8 Discharge resistors.................................................................................................................................................................. 9 Cross section of connecting cable between main supply and capacitor bank, fuse rating.................................................... 10 Calculation of the required rated capacitor output in detuned filter circuits........................................................................... 11 PhMKP, PhMKPg..., CYLINDRICAL, LVAC Quick reference data ............................................................................................................................................................... Application............................................................................................................................................................................... Design...................................................................................................................................................................................... Technical data ......................................................................................................................................................................... Range of 3-phase types, IP00, oil - 230 V, 400 V (415 V), 440 V (415 V), 525 V (480 V) ............................................................................................................ - 660 V (690 V), 690 V (660 V) .............................................................................................................................................. Range of 3-phase types, IP20, oil - 230 V, 400 V (415 V) .......................................................................................................................................................... - 440 V (415 V)...................................................................................................................................................................... - 525 V (480 V)...................................................................................................................................................................... - 660 V (690 V), 690 V (660 V) .............................................................................................................................................. Range of 3-phase types, IP00, dry - 230 V, 400 V (415 V), 440 V (415 V), 525 V (480 V) ............................................................................................................ - 660 V (690 V), 690 V (660 V) .............................................................................................................................................. Range of 3-phase types, IP20, dry - 230 V, 400 V (415 V) .......................................................................................................................................................... - 440 V (415 V)...................................................................................................................................................................... - 525 V (480 V)...................................................................................................................................................................... - 660 V (690 V), 690 V (660 V) .............................................................................................................................................. Range of 1-phase types, oil - 230 V, 400 V (415 V), 525 V (480 V) ................................................................................................................................... Dimensions .............................................................................................................................................................................. Revision: 17-Mar-14 1 12 13 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Table of Contents www.vishay.com Vishay ESTA PhMKDg..., TRIANGULAR, LVAC Quick reference data ............................................................................................................................................................... Application............................................................................................................................................................................... Description .............................................................................................................................................................................. Technical data, D-type PhMKDg, indoor.................................................................................................................................. Range of 3-phase types - 400 V, 440 V, 440 V (415 V), 460 V, 525 V, 690 V, 760 V .................................................................................................. Dimensions, indoor.................................................................................................................................................................. Discharge resistors.................................................................................................................................................................. Technical data, D-type PhMKDgF, outdoor ............................................................................................................................ Dimensions, outdoor ............................................................................................................................................................... Accessories ............................................................................................................................................................................. 29 29 30 31 31 32 32 33 34 34 PhMKP..., RECTANGULAR, LVAC Quick reference data ............................................................................................................................................................... Application............................................................................................................................................................................... Description .............................................................................................................................................................................. Design...................................................................................................................................................................................... Technical data ......................................................................................................................................................................... Range of types - Delta connection, IP43 ...................................................................................................................................................... - Delta connection, IP00 ...................................................................................................................................................... Dimensions .............................................................................................................................................................................. 35 35 36 36 37 38 38 39 PhMKP.../-DW, LVAC Quick reference data ............................................................................................................................................................... Application............................................................................................................................................................................... Description .............................................................................................................................................................................. Design...................................................................................................................................................................................... Technical data ......................................................................................................................................................................... Dimensions .............................................................................................................................................................................. Revision: 17-Mar-14 2 40 40 41 41 42 43 General Information www.vishay.com Vishay ESTA Low Voltage Power Capacitors GENERAL TECHNICAL INFORMATION MKP-TECHNOLOGY FILLING AGENT Capacitors are used in many diverse applications, and many different capacitor technologies are available. In low voltage applications, MKP-type capacitors which are made in accordance with metallized polypropylene technology have proved to be most appropriate and also the most cost effective. Dependent on the nominal voltage of the capacitor, the thickness of the polypropylene film will differ. ESTAprop MKP-TYPE CAPACITOR (metallized polypropylene film) Design of a MKP-type capacitor 1 Electrodes (metallized) 2 Polypropylene film 3 1 3 4 2 Electric contact (schooping) 4 Non-metallized edge 4 At the end of service life, or due to inadmissible electrical or thermal overload, an insulation breakdown may occur. A breakdown causes a small arc which evaporates the metal layer around the point of breakdown and re-establishes the insulation at the place of perforation. After electric breakdown, the capacitor can still be used. The decrease of capacitance caused by a self-healing process is less than 100 pF. The self-healing process lasts for a few microseconds only and the energy necessary for healing can be measured only by means of sensitive instruments. Self-healing breakdown 1 Electrodes (metallized) 4 3 After an extended drying period, the filling of the capacitor casing with oil is carried out under high vacuum for removal of moisture. Following this process, the capacitor will be hermetically sealed. This process ensures excellent heat dissipation and constant capacitance over full service life. ESTAdry ESTAdry MKP-type capacitors are “dry”. That is, after the extended drying period and before the hermetic sealing of the casing, a non-liquid filling agent is used instead of natural oil. In case of tubular cans, it is an environmentally friendly inert gas-filling to avoid corrosion of the winding elements and inner electric contacts. For larger dry capacitors, e.g. the D-type capacitors or the DW-type filter capacitors, the filling agent is a resin. A little “g” shows the difference in the type designation between the oil-filled (PhMKP) and the dry version (PhMKPg). 3 SELF-HEALING 2 ESTAprop MKP-type capacitors are filled with a natural oil. The highly fire-resisting insulation oil on vegetable base (flash point 285 °C, ignition point 315 °C) is fully biodegradable and non-toxic. 1 Both versions comply with the highest temperature class D, specified by the standards. PROVIDING THE WINDING ELEMENT WITH ELECTRIC CONTACTS For ESTAprop and ESTAdry MKP-type capacitors, metallized electrodes are used. A winding element consists of two displaced polypropylene films, wound together. The front surface of the winding elements is joined by means of a metal spray process. This process is called schooping. Due to the displacement of the two polypropylene films, only one film will be electrically connected on one side of the element. The terminal leads can be soldered onto this sprayed metal surface. 2 Polypropylene film 3 Point of breakdown 4 Non-conductive insulating area TOP VIEW Revision: 08-Mar-10 Document Number: 13001 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 General Information www.vishay.com Vishay ESTA CHARACTERISTICS OF DIELECTRIC OPERATING CONDITION MKP-POLYPROPYLENE, METALLIZED At the end of service life, due to inadmissible electrical or thermal overload, an overpressure builds up and causes an expansion of the cover. Expansion over a certain limit causes the tear-off of the internal fuses. The active capacitor elements are thus cut off from the source of supply. The pressure within the casing separates the breaking point so rapidly that no harmful arc can occur. C (%) OVERPRESSURE TEAR-OFF FUSE Capacitance = F (ϑ) 104 102 100 98 96 94 - 20 0 20 40 60 80 100 ϑ temp. (°C) W/kvar Losses = f (T) 2.0 1.5 1.0 0.5 TORN-OFF CONDITION 0 0 3 6 9 12 Operating time in months W/kvar Losses = F (ϑ) 2.0 1.5 1.0 0.5 0 0 20 40 60 80 100 ϑ temp. (°C) CE-MARKING UL- AND ULC-MARKING ESTAprop ESTAdry Low voltage capacitors conform with the regulations of the following European directive: 73/23 EEC Low Voltage Directive All ESTAprop and ESTAdry low voltage power factor correction capacitors are supplied with CE-marking. Revision: 08-Mar-10 ESATAprop and ESTAdry cylindrical type capacitors have been tested and approved by independent laboratories such as Underwriters Laboratories Inc. (UL). ESTAprop and ESTAdry low voltage capacitors conform with UL standard 810 and Canadian standard C 22.2. UL and ULC marks are included in standard component marking. Document Number: 13001 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Terms and Definitions, Applicable Standards www.vishay.com Vishay ESTA Low Voltage Power Capacitors TERMS AND DEFINITIONS, APPLICABLE STANDARDS ESTAprop and ESTAdry power factor correction capacitors are designed to VDE 0560-46 + 47, IEC 60831-1 + 2 and EN 60831-1 + 2, latest edition. voltage and rated frequency, excluding transients. Taking into account a previous capacitance tolerance of 1.15 x Cn, the maximum current can reach 1.5 x In. DEFINITION OF RATINGS These overcurrent factors are intended to take into account the combined effects of harmonics, overvoltages and capacitance tolerance. Ucn Rated voltage: The RMS value of the alternating voltage ... In Rated current: The RMS value of the alternating current ... Cn Rated capacitance: The capacitance value ... ... for which the capacitor has been designed. MAXIMUM PERMISSIBLE CURRENT ESTAprop and ESTAdry MKP-type capacitors are suitable for continuous operation at an RMS line current of 1.3 times the fundamental current that occurs at rated sinusoidal MAXIMUM PERMISSIBLE VOLTAGE ESTAprop and ESTAdry MKP-type capacitors are suitable for operation at voltage levels as indicated in the table (extract from IEC 60831-1 clause 20 - table 3) below: VOLTAGE FACTOR UCN MAXIMUM DURATION OBSERVATION Power frequency 1.0 Continuous Highest average value during any period of capacitor energization Power frequency 1.10 8 h in every 24 h System voltage regulation and fluctuations Power frequency 1.15 30 min in every 24 h System voltage regulation and fluctuations Power frequency 1.20 5 min (only 200 times in the life of the capacitor) Voltage rise at light load Power frequency 1.30 1 min (only 200 times in the life of the capacitor) FREQUENCY RMS Power frequency and Harmonics Such that the current does not exceed the value given above. HARMONIC DISTORTION Capacitors can be overloaded in networks distorted by harmonics. This situation is even more critical in the case of resonance. Where the capacitor current or voltage can be a few times as high as the nominal voltage. Therefore, special precautions (e.g. series filter circuit reactors) should be taken in networks distorted by harmonics. Our warranty only applies for operating conditions in accordance with the above mentioned standards. DAMPING OF INRUSH CURRENT Switching devices especially suited for capacitor switching shall be used. For example, the device shall be such that restriking during breaking operations, which may result in high overvoltages, cannot occur. The operating experience of ESTAprop MKP-type capacitors since their introduction in 1978 has shown their excellent behavior when being switched. High output densities and reduction of losses have resulted in reduced resistance of modern MKP-type capacitors. Especially switching capacitors in parallel to others being already energized, cause very high inrush currents which Revision: 22-Mar-10 should be reduced to 100 x In (according to standard). As a consequence, the life cycle of contactors and also capacitors will be affected. In case of detuned capacitor banks, the inrush current will be limited by the inductivity of the series filter reactors. For capacitor banks without filter reactors, we recommend the use of capacitor contactors with series resistors. We recommend these special contactors instead of damping the inrush current by coiling up the connection cable between contactor and capacitor. This is due to superior damping behavior and reduced losses in connecting cables, resulting in temperature reduction inside the cubicle. Contactors have to be replaced after about 100 000 switching operations. Modern PFC controllers are able to memorize the switching number per capacitor step. A regular check recommended. of the contactors is strongly Document Number: 13002 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Terms and Definitions, Applicable Standards www.vishay.com Vishay ESTA OPERATING TEMPERATURES Capacitors are classified for ambient temperature categories, each category being specified by a number followed by a letter. The number represents the lowest ambient-air temperature at which the capacitor may be operated. The letter represents upper limit of operating temperature, having maximum values specified in the table below. AMBIENT TEMPERATURE °C MAXIMUM AVERAGE OVER MAXIMUM A 24 h 1 YEAR 40 30 20 B 45 35 25 C 50 40 30 D 55 45 35 ESTAprop and ESTAdry, PhMKP-type, cylindrical capacitors are designed for category: -25/D (ESTAprop), -40/D (ESTAdry) DEGREE OF PROTECTION, IP CODE Degrees of protection are described by the IP code. The designation consists of the letters “IP” followed by two characteristic figures, e.g. “IP00” means no protection. The first characteristic figure indicates that: - the enclosure provides protection of persons against access to hazardous parts by preventing or limiting the ingress of a part of the human body or an object held by a person; and simultaneously - the enclosure provides protection of equipment against the ingress of solid foreign objects. The second characteristic figure indicates the degree of protection provided by enclosures with respect to harmful effects on the equipment due to the ingress of water. CHARACTERISTIC NUMERICAL 1ST PROTECTION AGAINST ACCESS TO HAZARDOUS PARTS AND PENETRATION OF SOLID FOREIGN OBJECTS INCLUDING DUST 0 No protection No protection 1 Protected against solid foreign objects of 50 mm Ø and greater Protected against vertically falling water drops 2 Protected against solid foreign objects of 12.5 mm Ø and greater Protected against vertically falling water drops when enclosure tilted up to 15° 3 Protected against solid foreign objects of 2.5 mm Ø and greater Protected against spraying water 4 Protected against solid foreign objects of 1 mm Ø and greater Protected against splashing water 5 Dust-protected Protected against water jets 6 Dust-tight Protected against powerful water jets Revision: 22-Mar-10 2ND PROTECTION AGAINST INGRESS OF WATER Document Number: 13002 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Calculations and Tables www.vishay.com Vishay ESTA Low Voltage Power Capacitors CAPACITOR SELECTION TABLE FOR POWER FACTOR CORRECTION OF ELECTRICAL MOTORS Reactive power is required by an asynchronous motor for the magnetic field. The amount of reactive power consumption of a motor depends on various parameters such as power rating, loading, rated speed, and design. The capacitor output should be maximum 90 % of the apparent power of a asynchronous motor under no-load conditions. This is important to avoid dangerous self excitation of the motor. A measurement of the motor current under no-load conditions can be easily performed or may be obtained from the manufacturer. GUIDELINE VALUES FOR CAPACITOR SELECTION MOTOR POWER RATING kW CAPACITOR OUTPUT SELECTION kvar Up to 3.9 Approximately 55 % of nominal motor power 4.0 to 4.9 2 5.0 to 5.9 2.5 6.0 to 7.9 8.0 to 10.9 4 11.0 to 13.9 5 14.0 to 17.9 6 18.0 to 21.9 7.5 22.0 to 29.9 10 30.0 and above Approximately 35 % of nominal motor power CAPACITOR SELECTION TABLE FOR POWER FACTOR CORRECTION OF TRANSFORMERS For power factor correction of transformers only the no-load reactive power has to be covered. The required capacitor output for three-phase transformers depends on the short-circuit voltage and is between 3 % and 12 % of the rated transformer output. In case harmonics are present on the high voltage side, the capacitor can form a series resonance circuit with the inductance of the transformer. Therefore the capacitor output has to be selected very carefully together with power utilities and the transformer manufacturer. The following formula can be used to check whether a certain capacitor output will create problems for specific harmonic orders on high voltage side: n= S/Q C n = Harmonic order QC = Rated capacitor output in kvar S = Short circuit power at the point of capacitor connection in kVA GUIDELINE VALUES FOR CAPACITOR SELECTION CAPACITOR OUTPUT IN kvar AT TRANSFORMER PRIMARY VOLTAGES TRANSFORMER RATING kVA 5 kV TO 10 kV 15 kV TO 20 kV 50 4.0 5.0 6.0 75 5.0 6.0 7.5 100 6.0 7.5 10.0 160 10.0 12.5 15.0 250 15.0 16.7 20.0 315 16.7 20.0 25.0 400 20.0 25.0 30.0 630 30.0 33.3 40.0 1000 45.0 50.0 55.0 1250 50.0 55.0 60.0 Revision: 22-Mar-10 25 kV TO 30 kV Document Number: 13003 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Calculations and Tables www.vishay.com Vishay ESTA CALCULATION AND SELECTION OF REQUIRED CAPACITOR RATING QC = P x (tan1 - tan 2) = P x (tan arccos cos 1 - tan arccos cos 2) 2 = Phase angle of target power factor cos 1 = Actual power factor cos 2 = Target power factor QC = Required capacitor output (kvar) P = Real power (kW) 1 = Phase angle of actual power factor The table below shows the values for typical power factors according to the formula “tan1 - tan 2”: TARGET POWER FACTOR 0.70 0.75 0.80 0.85 0.90 0.92 0.94 0.96 0.98 1.00 0.40 1.27 1.41 1.54 1.67 1.81 1.87 1.93 2.00 2.09 2.29 0.45 0.96 1.10 1.23 1.36 1.50 1.56 1.62 1.69 1.78 1.98 0.50 0.71 0.85 0.98 1.11 1.25 1.31 1.37 1.44 1.53 1.73 0.55 0.50 0.64 0.77 0.90 1.03 1.09 1.16 1.23 1.32 1.52 0.60 0.31 0.45 0.58 0.71 0.85 0.91 0.97 1.04 1.13 1.33 0.65 0.15 0.29 0.42 0.55 0.68 0.74 0.81 0.88 0.97 1.17 0.70 0.00 0.14 0.27 0.40 0.54 0.59 0.66 0.73 0.82 1.02 0.00 0.13 0.26 0.40 0.46 0.52 0.59 0.68 0.88 0.00 0.13 0.27 0.32 0.39 0.46 0.55 0.75 0.00 0.14 0.19 0.26 0.33 0.42 0.62 0.00 0.06 0.12 0.19 0.28 0.48 ACTUAL POWER FACTOR 0.75 0.80 0.85 0.90 The required capacitor output may be calculated as follows: select the factor k (matching point of actual and target power factor) Capacitor output in case of voltage and/or frequency different to the capacitor nominal voltage: calculate the required capacitor rating with the formula: U new 2 f new Q new = ------------- x ----------- x Q cn U cn f cn QC = k x P Note U new < U cn Example: Actual power factor = 0.70 Target power factor = 0.96 Real power P = 35 kW Capacitor output QC = ? QC = k x P = 0.73 x 35 kW = 25.5 kvar Unew = Supply voltage the capacitor is required for fnew = Frequency the capacitor is required for Qnew = Capacitor output at Unew and fnew Ucn = Rated capacitor voltage fcn = Rated capacitor frequency Qcn = Rated capacitor output at Ucn and fcn Revision: 22-Mar-10 Document Number: 13003 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Calculations and Tables www.vishay.com Vishay ESTA DISCHARGE RESISTORS ESTAprop MKP-type capacitors will be provided complete with discharge resistors. After the capacitor is disconnected from the source of supply, discharge resistors are required for discharging each unit within 3 min to 75 V or less from initial nominal peak voltage (according IEC-standard 60831-1 + 2). Discharge resistors have to be connected directly to the capacitors. There shall be no switch, fuse cut-out, or any other isolating device between the capacitor unit and the discharge resistors. MINIMUM REQUIRED RESISTORS (W) POWER RATING OF THE 2 U P = ------R Annotation: Our capacitors are discharged to 50 V or less within 1 min to comply also with UL standard 810. MAXIMUM RESISTOR VALUE MAXIMUM RESISTOR VALUE 60 s R ------------------------------------------------Un x 2 C n x I n ------------------------- 50 V 60 s R ----------------------------------------------------------------Un x 2 1/3 x Cn x I n ------------------------- 50 V Cn R R Cn Example: PhMKP 400.3.25 (Delta Connection) R Cn = 165.8 μF Cn 60 s = > R --------------------------------------------------------------------------------------------6 400 V x 2 165.8 x 10 F x I n ------------------------------ 50 V R 149.1 k (a thick film discharge resistor with 145 k is used) Note • Attention: Terminals have to be short-circuited before handling. Revision: 22-Mar-10 Document Number: 13003 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Calculations and Tables www.vishay.com Vishay ESTA CROSS SECTION OF CONNECTING CABLE BETWEEN MAIN SUPPLY AND CAPACITOR BANK, FUSE RATING Cross section for connecting cable and fuse rating have to be selected in accordance with the standard VDE 0100 part 523. Values mentioned below are guideline values valid for operation under normal conditions and at an ambient RATED VOLTAGE 230 V, 50 Hz OUTPUT kvar temperature of 40 °C. Higher values shall be selected if conditions differ from normal (e.g. high harmonic distortion or higher ambient temperature). RATED VOLTAGE 400 V, 50 Hz VOLTAGE 415 V, 50 Hz RATED CURRENT A FUSE A CABLE/ mm² RATED CURRENT A FUSE A CABLE/ mm² RATED CURRENT A FUSE A CABLE/ mm² 2.5 6.3 16 2.5 3.6 10 1.5 3.5 10 1.5 5.0 12.6 25 4 7.2 20 2.5 7.0 20 2.5 6.67 16.7 35 6 9.6 20 2.5 9.3 20 2.5 7.5 19 35 6 10.80 20 2.5 10.4 20 2.5 8.33 21 35 6 12 20 2.5 11.6 20 2.5 10.0 25 50 10 14.4 25 4 13.9 25 4 12.5 31 63 16 18 35 6 17.4 35 6 15.0 38 63 16 21.7 35 6 20.9 35 6 16.7 42 80 25 24.1 50 10 23.2 50 10 20.0 50 100 35 28.9 50 10 27.8 50 10 25.0 63 125 50 36.1 63 16 34.8 63 16 30.0 75 125 50 43.3 80 25 41.7 80 25 33.3 84 160 70 48.1 80 25 46.3 80 25 40.0 100 160 95 57.7 100 35 55.6 100 35 50.0 125 250 120 72.2 125 50 69.6 125 50 60.0 - - - 86.6 160 70 83.5 160 70 66.7 - - - 96.3 160 70 92.8 160 70 70.0 - - - 101 160 70 97 160 70 75.0 - - - 108 160 70 104 160 70 83.3 - - - 120 200 95 116 200 95 100.0 - - - 144 250 120 139 250 120 CAPACITOR BANK INTERNAL WIRING The internal wiring of capacitor banks can be normally done with a lower cross section. Various parameters such as cabinet inside temperature, quality of cable, maximum cable isolation temperature, single or multicore cable, and temperature rating have to be taken into consideration for selection of the appropriate value. Revision: 22-Mar-10 The contrary requirement for limiting the inrush current and reduction of cable losses is another important aspect in this matter if no inrush current limiting devices are used. Document Number: 13003 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Calculations and Tables www.vishay.com Vishay ESTA CALCULATION OF THE REQUIRED RATED CAPACITOR OUTPUT IN DETUNED FILTER CIRCUITS (FACTORS TO BE MULTIPLIED WITH THE REQUIRED OUTPUT PER STEP) SUPPLY VOLTAGE 400 V RATED VOLTAGE (1) OF CAPACITOR V 5 5.5 6 7 12.5 13 14 440 1.150 1.143 1.137 1.125 - - - 525 1.637 1.628 1.619 1.602 1.507 1.499 1.481 DETUNING FACTOR IN % SUPPLY VOLTAGE 415 V RATED VOLTAGE (1) OF CAPACITOR V 5 5.5 6 7 12.5 13 14 440 1.068 1.062 1.057 - - - - 525 1.520 1.512 1.504 1.488 1.400 1.392 1.376 DETUNING FACTOR IN % SUPPLY VOLTAGE 440 V RATED VOLTAGE (1) OF CAPACITOR V 5 5.5 6 7 12.5 13 14 525 1.352 1.345 1.338 1.324 1.246 1.239 1.224 DETUNING FACTOR IN % SUPPLY VOLTAGE 480 V RATED VOLTAGE (1) OF CAPACITOR V 5 5.5 6 7 12.5 13 14 525 1.136 1.130 1.125 1.113 - - - 660 1.796 1.787 1.777 1.758 1.654 1.645 1.626 DETUNING FACTOR IN % Example: Required output per step at supply voltage: 50 kvar Supply voltage: 400 V Detuning factor: 7 % Rated voltage of the capacitor: 440 V Factor of the table: 1.125 Required rated output of the capacitors: 50 kvar x 1.125 = 56.25 kvar Selection: for instance: 2 x PhMKP 440.3.28, 1 Note (1) For filter circuits the capacitor rated voltage has to be chosen always higher than the supply voltage. i.e.: Fundamental voltage increased by the reactor and harmonics. Revision: 22-Mar-10 Document Number: 13003 11 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., PhMKPg..., Cylindrical, LVAC www.vishay.com Vishay ESTA LVAC Power Capacitors FEATURES • Self-healing technology • Over pressure tear-off fuse • Aluminum case • Excellent heat dissipation • Various design options: Slim diameter or low height, screw terminal IP00 or terminal block IP20 • Two versions available: Oil-filled and dry, gas filled • UL and cUL approved APPLICATIONS • For applications 1-phase or 3-phase 1000 VACRMS • Free standing, fixed individual-PFC (e.g. motors, lighting, transformers) • Automatic central-PFC (e.g. group of loads) • Harmonic trap (e.g. UPS, frequency drives, converter) QUICK REFERENCE DATA Series Description Type Technology Voltage max. (V) Capacitance min. (μF) PhMKP…, cylindrical PhMKPg…, cylindrical LVAC Power Capacitors - Oil - INDOOR, IP00 - IP20 LVAC Power Capacitors - Dry - INDOOR, IP00 - IP20 Capacitors, fixed, low voltage Capacitors, fixed, low voltage MKP, metallized polypropylene film MKP, metallized polypropylene film 1000 1000 3-phase D: 3 x 11.5, 3-phase Y: 3 x 83.6, 1-phase: 49.7 3-phase D: 3 x 11.5, 3-phase Y: 3 x 83.6 Capacitance max. (μF) 3-phase D: 3 x 335.0, 3-phase Y: 3 x 219.3, 1-phase: 332.2 3-phase D: 3 x 335.0, 3-phase Y: 3 x 219.3 Output min. (kvar) 2 2 Output max. (kvar) 37.1 37.1 Revision: 04-Jun-14 Document Number: 13004 12 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., PhMKPg..., Cylindrical, LVAC www.vishay.com Vishay ESTA CAPACITORS IN CYLINDRICAL CASING APPLICATION The Vishay ESTA PhMKP/PhMKPg series of power factor correction capacitors in cylindrical aluminum casing now provide higher kvar/voltage combinations for use in low-voltage systems. The newly available 116 mm and 136 mm diameter capacitors complete the successful range of compact and slim cylindrical capacitors of 64 mm and 84.4 mm diameter design up to the lowest outputs of the triangular can design of the PhMKDg model. The 116 mm and 136 mm start where the output of the 84 mm design ends. At the point of change, the customer has two options: the lower height profile of the 116 mm and 136 mm or the slimmer diameter of the 84.4 mm design. The Vishay ESTA LVAC capacitors are suitable for use in both standard PFC applications and in heavy-duty applications such as wind turbines: • automatic PFC-equipment • individual fixed PFC (e.g. motors, transformers, lighting) • group fixed PFC • tuned and detuned capacitor banks • harmonic filters (e.g. UPS, frequency drives, converter) DESIGN The Vishay ESTA LVAC MKP capacitors are metallized polypropylene film capacitors with self-healing properties. The current carrying metal layer of an MKP capacitor is vaporised onto one side of the polypropylene film. The front surface of tubular winding elements are joined by means of the metal spray method (schooping). Three winding elements are encapsulated in one aluminum casing and and connected to form a true 3-phase capacitor. The overpressure tear-off fuse prevents the capacitor from bursting at the end of service life, or due to inadmissible electrical or thermal overloads. The capacitor is housed in a tubular aluminum container with a aluminum lid press-rolled onto it (64 mm and 84.4 mm) or welded (116 mm and 136 mm). The current is supplied via IP00 screw-on (M5) or IP20 block type safety terminal. A threaded stud (M12) at the bottom of the container serves for both grounding and mounting. The Vishay ESTAprop and ESTAdry capacitors will be delivered together with discharge resistors and hardware for mounting and connection. Vishay ESTA standard capacitors of 64 mm, 84.4 mm, 116 mm and 136 mm diameter will be delivered together with a thickfilm discharge resistor unit and fixing material for easy mounting and connection. In 84.4 mm diameter IP00 design there is also an option for feed-through (IN-LINE) connection of the capacitors to the supply. The entire range of Vishay ESTA LVAC products are offered in both natural oil-filled ESTAprop PhMKP and gas-filled ESTAdry PhMKPg versions. Revision: 04-Jun-14 1-/3-PHASE CAPACITOR, IP00 SCREW-TYPE TERMINALS 84.4 mm DIAMETER 1-/3-PHASE CAPACITOR, IP20 TERMINAL BLOCK 64 mm/84.4 mm DIAMETER 3-PHASE CAPACITOR, IP20 TERMINAL BLOCK 116 mm DIAMETER 3-PHASE CAPACITOR, IP20 TERMINAL BLOCK 136 mm DIAMETER Document Number: 13004 13 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., PhMKPg..., Cylindrical, LVAC www.vishay.com Vishay ESTA CAPACITORS IN CYLINDRICAL CASING TECHNICAL DATA STANDARDS IEC 60831-1 + 2, EN 60831- 1 + 2, UL810 LATEST EDITIONS, UL/ULC - FILE E97723 Overvoltages (in accordance with the above standards) Ucn + 10 % (up to 8 h daily) Ucn + 15 % (up to 30 min daily) Ucn + 20 % (up to 5 min, only 200 times in the life of the capacitor) Ucn + 30 % (up to 1 min, only 200 times in the life of the capacitor) Please also refer to “Terms and Definitions”. Overcurrent (in accordance with the above standards) 1.3 x In, 1.43 x In with 10 % overvoltages, 10 % over capacitance and harmonics included, continuous operation Please also refer to “Terms and Definitions”. Tolerance on capacitance -5 %/+10 % in accordance with the standards ± 5 % as Vishay ESTA standard Test voltage, terminal/terminal 2.15 x Ucn, VAC , 2 s (routine test) Test voltage, terminal/casing 4800 VAC, 2 s (routine test) Inrush current 300 times rated current In Losses 0.25 W/kvar to 0.45 W/kvar (without discharge resistors) Statistical life expectancy > 150 000 operating h (ESTAprop) > 130 000 operating h (ESTAdry) Degree of protection IP20 clamp terminal with mounted discharge resistor unit or IP00 (terminal cover for higher protection class upon request), indoor Ambient temperature category -25/D (max. 55 °C) ESTAprop , -40/D (max. 55 °C) ESTAdry Permitted casing temperature Max. 65 °C (measured on top of the can) Cooling Naturally air-cooled Permissible relative humidity Maximum 95 % Maximum allowed altitude 2000 m above sea level Mounting position Vertical and horizontal Mounting and grounding Threaded M12 stud at the bottom of the container Safety features All-phase overpressure tear-off fuse, self-healing Casing Aluminum can Dielectric Polypropylene film, self-healing Filling agent Natural oil, non-PCB, biodegradable (ESTAprop) or dry/gas - filled (ESTAdry) Ø 64 mm IP20 M5 terminal block A (D-351), 2.0 Nm, max. 16 mm2 drawing 1 max. current, depending on ambient conditions: 34 A (1-phase)/25 A (3-phase) Ø 84 mm IP00 M5 screw terminals (D-203), 2.0 Nm, max. 25 mm2 drawing 2, feed through max. current, depending on ambient conditions: 57 A (1-phase)/52 A (3-phase) Terminals per casing Ø IP20 M5 terminal block A (D-351), 2.0 Nm, max. 16 mm2 drawing 3 max. current, depending on ambient conditions: 57 A (1-phase)/52 A (3-phase) Ø 116 mm IP20 M5 terminal block B (D-352), 2.0 Nm, max. 25 mm2 drawing 4 max. current, depending on ambient conditions: 60 A (3-phase) Ø 136 mm IP20 M5 terminal block B (D-352), 2.0 Nm, max. 25 mm2 drawing 5 max. current, depending on ambient conditions: 60 A (3-phase) Revision: 04-Jun-14 Document Number: 13004 14 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., PhMKPg..., Cylindrical, LVAC www.vishay.com Vishay ESTA 3-PHASE CAPACITORS IP00, OIL RATED VOLTAGE 230 V, 50 Hz, DELTA CONNECTION, UL/ULC PhMKP230.3.10,00-84 5341-44400-xx 10 3 x 200.6 25.1 DIMENSIONS ØxH mm 84.4 x 265 PhMKP230.3.12,50-84 5341-44401-xx 12.5 3 x 250.7 31.4 84.4 x 340 2.0 2 PhMKP230.3.15,00-84 5341-44402-xx 15 3 x 300.9 37.7 84.4 x 340 2.1 2 TYPE ARTICLE NO. (1) OUTPUT kvar CAP. μF CURRENT A WEIGHT kg DRAWING NO. 1.7 2 RATED VOLTAGE 400 V, 50 Hz, DELTA CONNECTION, UL/ULC CAN BE USED ALSO FOR 415 V, FULL OVER VOLTAGE RANGE OUTPUT OUTPUT TYPE ARTICLE NO. (1) kvar kvar 400 V 415 V PhMKP400.3.10,00-84 5341-44403-xx 10 10.8 PhMKP400.3.12,50-84 5341-44404-xx 12.5 13.5 PhMKP400.3.15,00-84 5341-44405-xx 15 16.1 PhMKP400.3.16,70-84 5341-44406-xx 16.7 18.0 3 x 110.7 24.1/25.0 84.4 x 265 1.7 2 PhMKP400.3.20,00-84 5341-44407-xx 20 21.5 3 x 132.6 28.8/30.0 84.4 x 265 1.7 2 PhMKP400.3.25,00-84 5341-44408-xx 25 26.9 3 x 165.8 36.1/37.4 84.4 x 265 1.7 2 WEIGHT kg DRAWING NO. 1.3 2 1.3 2 3 x 66.3 CURRENT A 400 V/415 V 14.4/15.0 DIMENSIONS ØxH mm 84.4 x 190 3 x 82.9 18.0/18.7 84.4 x 190 1.3 2 3 x 99.5 21.6/22.4 84.4 x 190 1.3 2 CAP. μF WEIGHT DRAWING NO. kg 1.3 2 RATED VOLTAGE 440 V, 50 Hz, DELTA CONNECTION, UL/ULC CAN BE USED ALSO FOR 415 V TYPE ARTICLE NO. (1) PhMKP440.3.12,50-84 5341-44409-xx PhMKP440.3.14,10-84 5341-44410-xx PhMKP440.3.15,00-84 PhMKP440.3.16,90-84 OUTPUT OUTPUT kvar kvar 440 V 415 V 12.5 11.1 3 x 68.5 CURRENT A 440 V/415 V 16.4/15.5 DIMENSIONS ØxH mm 84.4 x 190 3 x 77.0 18.5/17.5 84.4 x 190 CAP. μF 14.1 12.5 5341-44411-xx 15 13.3 3 x 82.2 19.7/18.6 84.4 x 190 1.3 2 5341-44412-xx 16.9 15 3 x 92.6 22.2/20.9 84.4 x 190 1.3 2 PhMKP440.3.18.80-84 5341-44413-xx 18.8 16.7 3 x 103.0 24.7/23.3 84.4 x 265 1.7 2 PhMKP440.3.20,00-84 5341-44414-xx 20 17.8 3 x 109.6 26.2/24.8 84.4 x 265 1.7 2 PhMKP440.3.22,50-84 5341-44415-xx 22.5 20 3 x 123.3 29.5/27.8 84.4 x 265 1.7 2 PhMKP440.3.25,00-84 5341-44416-xx 25 22.2 3 x 137.0 32.8/30.9 84.4 x 265 1.7 2 PhMKP440.3.28,10-84 5341-44417-xx 28.1 25 3 x 154.0 36.9/34.8 84.4 x 265 1.7 2 PhMKP440.3.30,00-84 5341-44418-xx 30 26.7 3 x 164.4 39.4/37.1 84.4 x 340 2.1 2 RATED VOLTAGE 525 V, 50 Hz, DELTA CONNECTION, UL/ULC CAN BE USED ALSO FOR 480 V TYPE ARTICLE NO. (1) OUTPUT OUTPUT kvar kvar 525 V 480 V CAP. μF CURRENT A 525 V/480 V DIMENSIONS ØxH mm WEIGHT kg DRAWING NO. PhMKP525.3.10,00-84 5341-44419-xx 10 8.33 3 x 38.5 11.0/10.1 84.4 x 190 1.3 2 PhMKP525.3.12,50-84 5341-44420-xx 12.5 10.4 3 x 48.1 13.7/12.6 84.4 x 190 1.3 2 PhMKP525.3.13.80-84 5341-44421-xx 13.8 11.5 3 x 53.1 15.2/13.8 84.4 x 190 1.3 2 PhMKP525.3.15,00-84 5341-44422-xx 15 12.5 3 x 57.7 16.5/15.0 84.4 x 190 1.3 2 PhMKP525.3.20,00-84 5341-44423-xx 20 16.7 3 x 77.0 22.0/20.1 84.4 x 265 1.7 2 PhMKP525.3.25,00-84 5341-44424-xx 25 20 3 x 96.2 27.5/25.1 84.4 x 265 1.7 2 Notes • Other voltage ratings, outputs, and frequencies upon request. All PhMKP-type capacitors may be also be applied in 60 Hz networks, output and current will, however, be 20 % higher in these cases (i.e. additional thermal load and therefore, a lower class of temperature must be taken into account) (1) Version no. xx may differ as it respects small changes, e.g. on the label Revision: 04-Jun-14 Document Number: 13004 15 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., PhMKPg..., Cylindrical, LVAC www.vishay.com Vishay ESTA 3-PHASE CAPACITORS IP00, OIL RATED VOLTAGE 660 V, 50 Hz, DELTA CONNECTION, UL/ULC UP TO 660 V CAN BE USED ALSO FOR 690 V, FULL OVER VOLTAGE RANGE ARTICLE NO. (1) TYPE OUTPUT OUTPUT kvar kvar 660 V 690 V 8.33 9.1 3 x 20.3 CURRENT A 660 V/690 V 7.3/7.6 DIMENSIONS ØxH mm 84.4 x 190 3 x 24.4 8.7/9.1 84.4 x 190 CAP. μF WEIGHT kg DRAWING NO. PhMKP660.3.08,33-84 5341-44425-xx PhMKP660.3.10,00-84 5341-44426-xx 10 PhMKP660.3.12,50-84 5341-44427-xx 12.5 13.7 3 x 30.4 10.9/11.5 84.4 x 265 1.9 2 PhMKP660.3.15,00-84 5341-44428-xx 15 16.4 3 x 36.5 13.1/13.7 84.4 x 265 2.0 2 PhMKP660.3.16,70-84 5341-44429-xx 16.7 18.3 3 x 40.7 14.6/15.3 84.4 x 265 2.0 2 PhMKP660.3.20,00-84 5341-44430-xx 20 21.9 3 x 48.7 17.5/18.3 84.4 x 340 2.4 2 PhMKP660.3.22,90-84 5341-44431-xx 22.9 25.0 3 x 55.8 20.0/20.9 84.4 x 340 2.4 2 DIMENSIONS ØxH mm 84.4 x 265 WEIGHT kg DRAWING NO. 10.9 1.4 2 1.9 2 RATED VOLTAGE 690 V, 50 Hz, DELTA CONNECTION CAN BE USED ALSO FOR 660 V OUTPUT OUTPUT kvar kvar 660 V 690 V 11.4 12.5 PhMKP690.3.12,50-84 5341-44432-xx 3 x 27.9 CURRENT A 690 V/660 V 10.5/10.0 1.9 2 PhMKP690.3.15,00-84 5341-44433-xx 13.7 15 3 x 33.4 12.6/12.0 84.4 x 265 1.9 2 PhMKP690.3.20,00-84 5341-44434-xx 18.3 20 3 x 44.6 16.7/16.0 84.4 x 340 2.4 2 PhMKP690.3.25,00-84 5341-44435-xx 22.9 25 3 x 55.7 20.9/20.0 84.4 x 340 2.4 2 ARTICLE NO. (1) TYPE CAP. μF Notes • Other voltage ratings, outputs, and frequencies upon request. All PhMKP-type capacitors may be also be applied in 60 Hz networks, output and current will, however, be 20 % higher in these cases (i.e. additional thermal load and therefore, a lower class of temperature must be taken into account) (1) Version no. xx may differ as it respects small changes, e.g. on the label Terminal cover (IP20), available for 84.4 mm diameter tubular can type capacitors. (Cable gland not available for use with these covers) TYPE CAP84-88-IN-LINE ARTICLE NO. CAPACITOR Ø IN mm 5341-COV-84-88-IP20-7 84.4 Type CAP84-88-IN-LINE • Protection class IP20 • Protective cover prevents unintentional touching of live terminals • Proper ventilation is provided by use of additional holes in the protective cover’s top • Six slots located on the cover, three on each side, allow easy IN-LINE connection between two TERMINAL COVER IP20: CAP84-IN-LINE Revision: 04-Jun-14 IN-LINE CONNECTION BETWEEN TWO CAPACITORS, IP20 Document Number: 13004 16 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., PhMKPg..., Cylindrical, LVAC www.vishay.com Vishay ESTA 3-PHASE CAPACITORS IP20, OIL RATED VOLTAGE 230 V, 50 Hz, DELTA CONNECTION, UL/ULC ARTICLE NO. (1) OUTPUT kvar CAP. μF CURRENT A DIMENSIONS ØxH mm WEIGHT kg DRAWING NO. PhMKP230.3.02,50-A64 5341-48300-xx 2.5 3 x 50.1 6.3 64 x 190 0.8 1 PhMKP230.3.05,00-A64 5341-48301-xx 5 3 x 100.3 12.6 64 x 265 1.0 1 PhMKP230.3.10,00-A84 5341-48600-xx 10 3 x 200.6 25.1 84.4 x 265 1.7 3 PhMKP230.3.12,50-A84 5341-48601-xx 12.5 3 x 250.7 31.4 84.4 x 340 2.0 3 PhMKP230.3.15,00-A84 5341-48602-xx 15 3 x 300.9 37.7 84.4 x 340 2.1 3 PhMKP230.3.10,00-B116 5341-47003-xx 10 3 x 200.6 25.1 116 x 160 2.1 4 PhMKP230.3.12,50-B116 5341-47004-xx 12.5 3 x 250.7 31.4 116 x 190 2.5 4 PhMKP230.3.15,00-B116 5341-47005-xx 15 3 x 300.9 37.7 116 x 190 2.5 4 PhMKP230.3.16,70-B116 5341-47006-xx 16.7 3 x 335.0 41.9 116 x 230 3.1 4 TYPE RATED VOLTAGE 400 V, 50 Hz, DELTA CONNECTION, UL/ULC CAN BE USED ALSO FOR 415 V, FULL OVER VOLTAGE RANGE TYPE ARTICLE NO. (1) OUTPUT OUTPUT kvar kvar 400 V 415 V CAP. μF CURRENT A 400 V/415 V DIMENSIONS ØxH mm WEIGHT DRAWING NO. kg PhMKP400.3.02,50-A64 5341-48302-xx 2.5 2.7 3 x 16.6 3.6/3.7 64 x 190 0.8 1 PhMKP400.3.05,00-A64 5341-48303-xx 5 5.4 3 x 33.2 7.2/7.5 64 x 190 0.8 1 PhMKP400.3.06,67-A64 5341-48304-xx 6.67 7.2 3 x 44.2 9.6/10.0 64 x 190 0.8 1 PhMKP400.3.07,50-A64 5341-48305-xx 7.5 8.1 3 x 49.7 10.8/11.2 64 x 190 0.8 1 PhMKP400.3.08,33-A64 5341-48306-xx 8.33 9.0 3 x 55.2 12/12.5 64 x 190 0.8 1 PhMKP400.3.10,00-A64 5341-48307-xx 10 10.8 3 x 66.3 14.4/14.9 64 x 265 1.0 1 PhMKP400.3.12,50-A64 5341-48308-xx 12.5 13.5 3 x 82.9 18/18.7 64 x 265 1.0 1 PhMKP400.3.10,00-A84 5341-48603-xx 10 10.8 3 x 66.3 14.4/14.9 84.4 x 190 1.3 3 PhMKP400.3.12,50-A84 5341-48604-xx 12.5 13.5 3 x 82.9 18/18.7 84.4 x 190 1.3 3 PhMKP400.3.15,00-A84 5341-48605-xx 15 16.1 3 x 99.5 21.6/22.4 84.4 x 190 1.3 3 PhMKP400.3.16,70-A84 5341-48606-xx 16.7 18.0 3 x 110.7 24.1/25.0 84.4 x 265 1.7 3 PhMKP400.3.20,00-A84 5341-48607-xx 20 21.5 3 x 132.6 28.8/30.0 84.4 x 265 1.7 3 PhMKP400.3.25,00-A84 5341-48608-xx 25 26.9 3 x 165.8 36.1/37.4 84.4 x 265 1.7 3 PhMKP400.3.16,70-B116 5341-47010-xx 16.7 18.0 3 x 110.7 24.1/25.0 116 x 160 2.1 4 PhMKP400.3.20,00-B116 5341-47011-xx 20 21.5 3 x 132.6 28.8/29.9 116 x 160 2.1 4 PhMKP400.3.25,00-B116 5341-47012-xx 25 26.9 3 x 165.8 36.1/37.4 116 x 190 2.5 4 PhMKP400.3.30,00-B136 5341-47601-xx 30 32.3 3 x 198.9 43.3/44.9 136 x 190 2.6 5 Notes • Other voltage ratings, outputs, and frequencies upon request. All PhMKP-type capacitors may be also be applied in 60 Hz networks, output and current will, however, be 20 % higher in these cases (i.e. additional thermal load and therefore, a lower class of temperature must be taken into account) (1) Version no. xx may differ as it respects small changes, e.g. on the label Revision: 04-Jun-14 Document Number: 13004 17 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., PhMKPg..., Cylindrical, LVAC www.vishay.com Vishay ESTA 3-PHASE CAPACITORS IP20, OIL RATED VOLTAGE 440 V, 50 Hz, DELTA CONNECTION, UL/ULC CAN BE USED ALSO FOR 415 V TYPE ARTICLE NO. (1) OUTPUT OUTPUT kvar kvar 440 V 415 V CAP. μF CURRENT DIMENSIONS WEIGHT DRAWING A ØxH kg NO. 440 V/415 V mm PhMKP440.3.02,50-A64 5341-48322-xx 2.5 2.2 3 x 13.7 3.3/3.1 64 x 190 0.7 1 PhMKP440.3.05,00-A64 5341-48309-xx 5 4.4 3 x 27.4 6.6/6.1 64 x 190 0.8 1 PhMKP440.3.08,33-A64 5341-48310-xx 8.33 7.4 3 x 45.7 10.9/10.3 64 x 190 0.8 1 PhMKP440.3.10,00-A64 5341-48311-xx 10 8.9 3 x 54.8 13.1/12.4 64 x 265 1.0 1 PhMKP440.3.11,20-A64 5341-48312-xx 11.2 10 3 x 61.4 14.7/13.9 64 x 265 1.0 1 PhMKP440.3.12,50-A64 5341-48313-xx 12.5 11.1 3 x 68.5 16.4/15.4 64 x 265 1.0 1 PhMKP440.3.14,00-A64 5341-48314-xx 14 12.5 3 x 76.7 18.4/17.4 64 x 265 1.0 1 PhMKP440.3.12,50-A84 5341-48609-xx 12.5 11.1 3 x 68.5 16.4/15.5 84.4 x 190 1.3 3 PhMKP440.3.14,10-A84 5341-48610-xx 14.1 12.5 3 x 77.0 18.5/17.5 84.4 x 190 1.3 3 PhMKP440.3.15,00-A84 5341-48611-xx 15 13.3 3 x 82.2 19.7/18.6 84.4 x 190 1.3 3 PhMKP440.3.16,90-A84 5341-48612-xx 16.9 15 3 x 92.6 22.2/20.9 84.4 x 190 1.3 3 PhMKP440.3.18.80-A84 5341-48613-xx 18.8 16.67 3 x 103.0 24.7/23.3 84.4 x 265 1.7 3 PhMKP440.3.20,00-A84 5341-48614-xx 20 17.8 3 x 109.6 26.2/24.8 84.4 x 265 1.7 3 PhMKP440.3.22,50-A84 5341-48615-xx 22.5 20 3 x 123.3 29.5/27.8 84.4 x 265 1.7 3 PhMKP440.3.25,00-A84 5341-48616-xx 25 22.2 3 x 137.0 32.8/30.9 84.4 x 265 1.7 3 PhMKP440.3.28,10-A84 5341-48617-xx 28.1 25 3 x 154.0 36.9/34.8 84.4 x 265 1.7 3 PhMKP440.3.30,00-A84 5341-48618-xx 30 26.7 3 x 164.4 39.4/37.1 84.4 x 340 2.1 3 PhMKP440.3.14,10-B116 5341-47068-xx 14.1 12.5 3 x 77.0 18.5/17.5 116 x 160 1.5 4 PhMKP440.3.18,80-B116 5341-47015-xx 18.8 16.67 3 x 103.0 24.7/23.3 116 x 160 1.8 4 PhMKP440.3.20,00-B116 5341-47016-xx 20 17.8 3 x 109.6 26.2/24.8 116 x 160 1.8 4 PhMKP440.3.22,50-B116 5341-47017-xx 22.5 20 3 x 123.3 29.5/27.8 116 x 160 1.9 4 PhMKP440.3.25,00-B116 5341-47018-xx 25 22.2 3 x 137.0 32.8/30.9 116 x 190 2.0 4 PhMKP440.3.28,10-B116 5341-47020-xx 28.1 25 3 x 154.0 36.9/34.8 116 x 190 2.0 4 PhMKP440.3.30,00-B116 5341-47022-xx 30 26.7 3 x 164.4 39.4/37.1 116 x 190 2.2 4 PhMKP440.3.33,00-B136 5341-47602-xx 33 29.4 3 x 180.9 43.3/40.9 136 x 190 2.3 5 Notes • Other voltage ratings, outputs, and frequencies upon request. All PhMKP-type capacitors may be also be applied in 60 Hz networks, output and current will, however, be 20 % higher in these cases (i.e. additional thermal load and therefore, a lower class of temperature must be taken into account) (1) Version no. xx may differ as it respects small changes, e.g. on the label Revision: 04-Jun-14 Document Number: 13004 18 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., PhMKPg..., Cylindrical, LVAC www.vishay.com Vishay ESTA 3-PHASE CAPACITORS IP20, OIL RATED VOLTAGE 525 V, 50 Hz, DELTA CONNECTION, UL/ULC CAN BE USED ALSO FOR 480 V TYPE ARTICLE NO. (1) OUTPUT OUTPUT kvar kvar 525 V 480 V CAP. μF CURRENT DIMENSIONS WEIGHT A ØxH kg 525 V/480 V mm DRAWING NO. PhMKP525.3.03,00-A64 5341-48315-xx 3 2.5 3 x 11.5 3.3/3.0 64 x 190 0.8 1 PhMKP525.3.05,00-A64 5341-48316-xx 5 4.2 3 x 19.2 5.5/5.0 64 x 190 0.8 1 PhMKP525.3.08,33-A64 5341-48317-xx 8.33 7 3 x 32.1 9.2/8.4 64 x 190 0.8 1 PhMKP525.3.10,00-A64 5341-48318-xx 10 8.33 3 x 38.5 11.0/10.1 64 x 265 1.0 1 PhMKP525.3.10,00-A84 5341-48619-xx 10 8.33 3 x 38.5 11.0/10.1 84.4 x 190 1.3 3 PhMKP525.3.12,50-A84 5341-48620-xx 12.5 10.4 3 x 48.1 13.7/12.6 84.4 x 190 1.3 3 PhMKP525.3.13.80-A84 5341-48621-xx 13.8 11.5 3 x 53.1 15.2/13.8 84.4 x 190 1.3 3 PhMKP525.3.15,00-A84 5341-48622-xx 15 12.5 3 x 57.7 16.5/15.0 84.4 x 190 1.3 3 PhMKP525.3.20,00-A84 5341-48623-xx 20 16.7 3 x 77.0 22.0/20.1 84.4 x 265 1.7 3 PhMKP525.3.25,00-A84 5341-48624-xx 25 20.9 3 x 96.2 27.5/25.1 84.4 x 265 1.7 3 PhMKP525.3.20,00-B116 5341-47024-xx 20 16.7 3 x 77.0 22.0/20.1 116 x 160 1.8 4 PhMKP525.3.25,00-B116 5341-47025-xx 25 20.9 3 x 96.2 27.5/25.1 116 x 190 2.5 4 PhMKP525.3.30,00-B116 5341-47069-xx 30 25.1 3 x 115.4 33.0/30.2 116 x 230 2.6 4 PhMKP525.3.30,00-B136 5341-47603-xx 30 25.1 3 x 115.4 33.0/30.2 136 x 190 2.6 5 PhMKP525.3.35,90-B116 5341-47070-xx 35.9 30 3 x 138.2 39.5/36.1 116 x 265 2.8 4 PhMKP525.3.35,90-B136 5341-47600-xx 35.9 30 3 x 138.2 39.5/36.1 136 x 230 3.5 5 PhMKP525.3.37,10-B116 5341-47065-xx 37.1 31 3 x 142.8 40.8/37.3 116 x 265 2.8 4 PhMKP525.3.37,10-B136 5341-47604-xx 37.1 31 3 x 142.8 40.8/37.3 136 x 230 3.5 5 Notes • Other voltage ratings, outputs, and frequencies upon request. All PhMKP-type capacitors may be also be applied in 60 Hz networks, output and current will, however, be 20 % higher in these cases (i.e. additional thermal load and therefore, a lower class of temperature must be taken into account) (1) Version no. xx may differ as it respects small changes, e.g. on the label Revision: 04-Jun-14 Document Number: 13004 19 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., PhMKPg..., Cylindrical, LVAC www.vishay.com Vishay ESTA 3-PHASE CAPACITORS IP20, OIL RATED VOLTAGE 660 V, 50 Hz, 64/84: DELTA CONNECTION, 116/136: STAR CONNECTION, UL/ULC UP TO 660 V CAN BE USED ALSO FOR 690 V TYPE ARTICLE NO. (1) OUTPUT OUTPUT kvar kvar 660 V 690 V CAP. μF CURRENT A 660 V/690 V DIMENSIONS ØxH mm WEIGHT kg DRAWING NO. PhMKP660.3.05,00-A64 5341-48319-xx 5 5.5 3 x 12.2 4.4/4.6 64 x 190 0.8 1 PhMKP660.3.08,33-A64 5341-48320-xx 8.33 9.1 3 x 20.3 7.3/7.6 64 x 265 1.0 1 PhMKP660.3.08,33-A84 5341-48625-xx 8.33 9.1 3 x 20.3 7.3/7.6 84.4 x 190 1.3 3 PhMKP660.3.10,00-A84 5341-48626-xx 10 10.9 3 x 24.4 8.7/9.1 84.4 x 190 1.3 3 PhMKP660.3.12,50-A84 5341-48627-xx 12.5 13.7 3 x 30.4 10.9/11.4 84.4 x 265 1.7 3 PhMKP660.3.15,00-A84 5341-48628-xx 15 16.4 3 x 36.5 13.1/13.7 84.4 x 265 1.7 3 PhMKP660.3.16,70-A84 5341-48629-xx 16.7 18.3 3 x 40.7 14.6/15.3 84.4 x 265 1.7 3 PhMKP660.3.20,00-A84 5341-48630-xx 20 21.9 3 x 48.7 17.5/18.3 84.4 x 340 2.1 3 PhMKP660.3.22,90-A84 5341-48631-xx 22.9 25 3 x 55.8 20/20.9 84.4 x 340 2.1 3 PhMKP660.2.12,50-B116 5341-47057-xx 12.5 13.7 3 x 91.4 10.9/11.4 116 x 160 2.1 4 PhMKP660.2.15,00-B116 5341-47058-xx 15 16.4 3 x 109.6 13.1/13.7 116 x 160 2.1 4 PhMKP660.2.16,70-B116 5341-47059-xx 16.7 18.3 3 x 122.1 14.6/15.3 116 x 160 2.1 4 PhMKP660.2.20,00-B116 5341-47061-xx 20 21.9 3 x 146.2 17.5/18.3 116 x 190 2.3 4 PhMKP660.2.22,90-B116 5341-47062-xx 22.9 25 3 x 167.3 20/20.9 116 x 190 2.5 4 PhMKP660.2.25,00-B136 5341-47605-xx 25 27.3 3 x 182.6 21.9/22.9 136 x 190 2.6 5 PhMKP660.2.30,00-B136 5341-47606-xx 30 32.8 3 x 219.2 26.2/27.4 136 x 230 3.4 5 RATED VOLTAGE 690 V, 50 Hz, 64/84: DELTA CONNECTION, 116/136: STAR CONNECTION CAN BE USED ALSO FOR 660 V TYPE ARTICLE NO. (1) OUTPUT OUTPUT kvar kvar 690 V 660 V 9.1 CAP. μF CURRENT A 690 V/660 V DIMENSIONS ØxH mm WEIGHT kg DRAWING NO. 3 x 22.3 8.4/8.0 64 x 265 1.1 1 PhMKP690.3.10,00-A64 5341-48321-xx 10 PhMKP690.3.12,50-A84 5341-48632-xx 12.5 11.4 3 x 27.9 10.5/10.0 84.4 x 265 1.9 3 PhMKP690.3.15,00-A84 5341-48633-xx 15 13.7 3 x 33.4 12.5/12.0 84.4 x 265 1.9 3 PhMKP690.3.20,00-A84 5341-48634-xx 20 18.3 3 x 44.6 16.7/16.0 84.4 x 340 2.4 3 PhMKP690.3.25,00-A84 5341-48635-xx 25 22.9 3 x 55.7 20.9/20.0 84.4 x 340 2.4 3 PhMKP690.2.12,50-B116 5341-47071-xx 12.5 11.4 3 x 83.6 10.5/10.0 116 x 160 2.0 4 PhMKP690.2.15,00-B116 5341-47072-xx 15 13.7 3 x 100.3 12.5/12.0 116 x 160 2.2 4 PhMKP690.2.20,00-B116 5341-47073-xx 20 18.3 3 x 133.7 16.7/16.0 116 x 190 2.2 4 PhMKP690.2.25,00-B116 5341-47074-xx 25 22.9 3 x 167.3 20.9/20.0 116 x 190 2.5 4 Notes • Other voltage ratings, outputs, and frequencies upon request. All PhMKP-type capacitors may be also be applied in 60 Hz networks, output and current will, however, be 20 % higher in these cases (i.e. additional thermal load and therefore, a lower class of temperature must be taken into account) (1) Version no. xx may differ as it respects small changes, e.g. on the label Revision: 04-Jun-14 Document Number: 13004 20 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., PhMKPg..., Cylindrical, LVAC www.vishay.com Vishay ESTA 3-PHASE CAPACITORS IP00, DRY RATED VOLTAGE 230 V, 50 Hz, DELTA CONNECTION, UL/ULC TYPE PhMKPg230.3.10,00-84 PhMKPg230.3.12,50-84 PhMKPg230.3.15,00-84 ARTICLE NO. (1) OUTPUT kvar CAP. μF CURRENT A DIMENSIONS ØxH mm WEIGHT kg DRAWING NO. 5343-44001-xx 5343-44002-xx 5343-44003-xx 10 12.5 15 3 x 200.6 3 x 250.7 3 x 300.9 25.1 31.4 37.7 84.4 x 265 84.4 x 340 84.4 x 340 1.4 1.5 1.7 2 2 2 RATED VOLTAGE 400 V, 50 Hz, DELTA CONNECTION, UL/ULC CAN BE USED ALSO FOR 415 V, FULL OVER VOLTAGE RANGE TYPE PhMKPg400.3.10,00-84 PhMKPg400.3.12,50-84 PhMKPg400.3.15,00-84 PhMKPg400.3.16,70-84 PhMKPg400.3.20,00-84 PhMKPg400.3.25,00-84 ARTICLE NO. (1) 5343-44004-xx 5343-44005-xx 5343-44006-xx 5343-44007-xx 5343-44008-xx 5343-44009-xx OUTPUT OUTPUT kvar kvar 400 V 415 V 10 12.5 15 16.7 20 25 10.8 13.5 16.1 18.0 21.5 26.9 CAP. μF 3 x 66.3 3 x 82.9 3 x 99.5 3 x 110.7 3 x 132.6 3 x 165.8 CURRENT DIMENSIONS A ØxH 400 V/415 V mm 14.4/15.0 18.0/18.7 21.6/22.4 24.1/25.0 28.8/30.0 36.1/37.4 84.4 x 190 84.4 x 190 84.4 x 190 84.4 x 265 84.4 x 265 84.4 x 265 WEIGHT DRAWING kg NO. 0.9 1.0 1.1 1.4 1.4 1.5 2 2 2 2 2 2 RATED VOLTAGE 440 V, 50 Hz, DELTA CONNECTION, UL/ULC CAN BE USED ALSO FOR 415 V TYPE PhMKPg440.3.12,50-84 PhMKPg440.3.14,10-84 PhMKPg440.3.15,00-84 PhMKPg440.3.16,90-84 PhMKPg440.3.18.80-84 PhMKPg440.3.20,00-84 PhMKPg440.3.22,50-84 PhMKPg440.3.25,00-84 PhMKPg440.3.28,10-84 PhMKPg440.3.30,00-84 ARTICLE NO. (1) 5343-44010-xx 5343-44011-xx 5343-44012-xx 5343-44013-xx 5343-44014-xx 5343-44015-xx 5343-44016-xx 5343-44017-xx 5343-44018-xx 5343-44019-xx OUTPUT OUTPUT kvar kvar 440 V 415 V 12.5 14.1 15 16.9 18.8 20 22.5 25 28.1 30 11.1 12.5 13.3 15 16.7 17.8 20 22.2 25 26.7 CAP. μF 3 x 68.5 3 x 77.0 3 x 82.2 3 x 92.6 3 x 103.0 3 x 109.6 3 x 123.3 3 x 137.0 3 x 154.0 3 x 164.4 CURRENT DIMENSIONS WEIGHT A ØxH kg 440 V/415 V mm 16.4/15.5 18.5/17.5 19.7/18.6 22.2/20.9 24.7/23.3 26.2/24.8 29.5/27.8 32.8/30.9 36.9/34.8 39.4/37.1 DRAWING NO. 84.4 x 190 84.4 x 190 84.4 x 190 84.4 x 190 84.4 x 265 84.4 x 265 84.4 x 265 84.4 x 265 84.4 x 265 84.4 x 340 1.0 1.1 1.1 1.2 1.3 1.4 1.4 1.5 1.5 1.8 2 2 2 2 2 2 2 2 2 2 RATED VOLTAGE 525 V, 50 Hz, DELTA CONNECTION, UL/ULC CAN BE USED ALSO FOR 480 V TYPE PhMKPg525.3.10,00-84 PhMKPg525.3.12,50-84 PhMKPg525.3.13.80-84 PhMKPg525.3.15,00-84 PhMKPg525.3.20,00-84 PhMKPg525.3.25,00-84 ARTICLE NO. (1) 5343-44020-xx 5343-44021-xx 5343-44022-xx 5343-44023-xx 5343-44024-xx 5343-44025-xx OUTPUT OUTPUT kvar kvar 525 V 480 V 10 12.5 13.8 15 20 25 8.33 10.4 11.5 12.5 16.7 20 CAP. μF CURRENT A 525 V/480 V DIMENSIONS ØxH mm WEIGHT kg DRAWING NO. 3 x 38.5 3 x 48.1 3 x 53.1 3 x 57.7 3 x 77.0 3 x 96.2 11.0/10.1 13.7/12.6 15.2/13.8 16.5/15.0 22.0/20.1 27.5/25.1 84.4 x 190 84.4 x 190 84.4 x 190 84.4 x 190 84.4 x 265 84.4 x 265 0.8 1.0 1.0 1.1 1.3 1.5 2 2 2 2 2 2 Notes • Other voltage ratings, outputs, and frequencies upon request. All PhMKP-type capacitors may be also be applied in 60 Hz networks, output and current will, however, be 20 % higher in these cases (i.e. additional thermal load and therefore, a lower class of temperature must be taken into account) (1) Version no. xx may differ as it respects small changes, e.g. on the label Revision: 04-Jun-14 Document Number: 13004 21 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., PhMKPg..., Cylindrical, LVAC www.vishay.com Vishay ESTA 3-PHASE CAPACITORS IP00, DRY RATED VOLTAGE 660 V, 50 Hz, DELTA CONNECTION, UL/ULC UP TO 660 V CAN BE USED ALSO FOR 690 V, FULL OVER VOLTAGE RANGE ARTICLE NO. (1) TYPE OUTPUT OUTPUT kvar kvar 660 V 690 V 8.33 9.1 CAP. μF 3 x 20.3 CURRENT DIMENSIONS WEIGHT DRAWING A ØxH NO. kg 660 V/690 V mm 7.3/7.6 84.4 x 190 0.9 2 PhMKPg660.3.08,33-84 5343-44026-xx PhMKPg660.3.10,00-84 5343-44027-xx 10 10.9 3 x 24.4 8.7/9.1 84.4 x 190 1.1 2 PhMKPg660.3.12,50-84 5343-44028-xx 12.5 13.7 3 x 30.4 10.9/11.5 84.4 x 265 1.2 2 PhMKPg660.3.15,00-84 5343-44029-xx 15 16.4 3 x 36.5 13.1/13.7 84.4 x 265 1.4 2 PhMKPg660.3.16,70-84 5343-44030-xx 16.7 18.3 3 x 40.7 14.6/15.3 84.4 x 265 1.5 2 PhMKPg660.3.20,00-84 5343-44031-xx 20 21.9 3 x 48.7 17.5/18.3 84.4 x 340 1.7 2 PhMKPg660.3.22,90-84 5343-44032-xx 22.9 25.0 3 x 55.8 20.0/20.9 84.4 x 340 1.9 2 RATED VOLTAGE 690 V, 50 Hz, DELTA CONNECTION CAN BE USED ALSO FOR 660 V ARTICLE NO. (1) TYPE OUTPUT OUTPUT kvar kvar 660 V 690 V 11.4 12.5 CAP. μF 3 x 27.9 CURRENT DIMENSIONS WEIGHT A ØxH kg 690 V/660 V mm 10.5/10.0 84.4 x 265 1.1 DRAWING NO. PhMKPg690.3.12,50-84 5343-44033-xx PhMKPg690.3.15,00-84 5343-44034-xx 13.7 15 3 x 33.4 12.6/12.0 84.4 x 265 1.3 2 2 PhMKPg690.3.20,00-84 5343-44035-xx 18.3 20 3 x 44.6 16.7/16.0 84.4 x 340 1.6 2 PhMKPg690.3.25,00-84 5343-44036-xx 22.9 25 3 x 55.7 20.9/20.0 84.4 x 340 1.9 2 Notes • Other voltage ratings, outputs, and frequencies upon request. All PhMKP-type capacitors may be also be applied in 60 Hz networks, output and current will, however, be 20 % higher in these cases (i.e. additional thermal load and therefore, a lower class of temperature must be taken into account) (1) Version no. xx may differ as it respects small changes, e.g. on the label Terminal cover (IP20), available for 84.4 mm diameter tubular can type capacitors. (Cable gland not available for use with these covers) TYPE CAP84-88-IN-LINE ARTICLE NO. CAPACITOR Ø IN mm 5341-COV-84-88-IP20-7 84.4 Type CAP84-88-IN-LINE • Protection class IP20 • Protective cover prevents unintentional touching of live terminals • Proper ventilation is provided by use of additional holes in the protective cover’s top • Six slots located on the cover, three on each side, allow easy IN-LINE connection between two TERMINAL COVER IP20: CAP84-IN-LINE Revision: 04-Jun-14 IN-LINE CONNECTION BETWEEN TWO CAPACITORS, IP20 Document Number: 13004 22 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., PhMKPg..., Cylindrical, LVAC www.vishay.com Vishay ESTA 3-PHASE CAPACITORS IP20, DRY RATED VOLTAGE 230 V, 50 Hz, DELTA CONNECTION, UL/ULC ARTICLE NO. (1) OUTPUT kvar CAP. μF CURRENT A DIMENSIONS ØxH mm WEIGHT kg DRAWING NO. PhMKPg230.3.02,50-A64 5343-48200-xx 2.5 3 x 50.1 6.3 64 x 190 0.6 1 PhMKPg230.3.05,00-A64 5343-48201-xx 5 3 x 100.3 12.6 64 x 265 0.8 1 PhMKPg230.3.10,00-A84 5343-48500-xx 10 3 x 200.6 25.1 84.4 x 265 1.4 3 PhMKPg230.3.12,50-A84 5343-48501-xx 12.5 3 x 250.7 31.4 84.4 x 340 1.5 3 PhMKPg230.3.15,00-A84 5343-48502-xx 15 3 x 300.9 37.7 84.4 x 340 1.7 3 PhMKPg230.3.10,00-B116 5343-47206-xx 10 3 x 200.6 25.1 116 x 160 1.5 4 PhMKPg230.3.12,50-B116 5343-47207-xx 12.5 3 x 250.7 31.4 116 x 190 1.7 4 PhMKPg230.3.15,00-B116 5343-47208-xx 15 3 x 300.9 37.7 116 x 190 1.9 4 PhMKPg230.3.16,70-B116 5343-47209-xx 16.7 3 x 335.0 41.9 116 x 230 2.2 4 TYPE RATED VOLTAGE 400 V, 50 Hz, DELTA CONNECTION, UL/ULC CAN BE USED ALSO FOR 415 V, FULL OVER VOLTAGE RANGE TYPE ARTICLE NO. (1) PhMKPg400.3.02,50-A64 5343-48202-xx PhMKPg400.3.05,00-A64 PhMKPg400.3.06,67-A64 OUTPUT OUTPUT kvar kvar 400 V 415 V CAP. μF 2.5 2.7 3 x 16.6 5343-48203-xx 5 5.4 5343-48204-xx 6.67 7.2 PhMKPg400.3.07,50-A64 5343-48205-xx 7.5 PhMKPg400.3.08,33-A64 5343-48206-xx PhMKPg400.3.10,00-A64 5343-48207-xx PhMKPg400.3.12,50-A64 CURRENT DIMENSIONS WEIGHT A ØxH kg 400 V/415 V mm DRAWING NO. 3.6/3.7 64 x 190 0.6 1 3 x 33.2 7.2/7.5 64 x 190 0.6 1 3 x 44.2 9.6/10.0 64 x 190 0.6 1 8.1 3 x 49.7 10.8/11.2 64 x 190 0.6 1 8.33 9.0 3 x 55.2 12/12.5 64 x 190 0.7 1 10 10.8 3 x 66.3 14.4/14.9 64 x 265 0.7 1 5343-48208-xx 12.5 13.5 3 x 82.9 18/18.7 64 x 265 0.8 1 PhMKPg400.3.10,00-A84 5343-48503-xx 10 10.8 3 x 66.3 14.4/14.9 84.4 x 190 1.0 3 PhMKPg400.3.12,50-A84 5343-48504-xx 12.5 13.5 3 x 82.9 18/18.7 84.4 x 190 1.4 3 PhMKPg400.3.15,00-A84 5343-48505-xx 15 16.1 3 x 99.5 21.6/22.4 84.4 x 190 1.4 3 PhMKPg400.3.16,70-A84 5343-48506-xx 16.7 18.0 3 x 110.7 24.1/25.0 84.4 x 265 1.4 3 PhMKPg400.3.20,00-A84 5343-48507-xx 20 21.5 3 x 132.6 28.8/30.0 84.4 x 265 1.4 3 PhMKPg400.3.25,00-A84 5343-48508-xx 25 26.9 3 x 165.8 36.1/37.4 84.4 x 265 1.5 3 PhMKPg400.3.16,70-B116 5343-47212-xx 16.7 18.0 3 x 110.7 24.1/25.0 116 x 160 1.5 4 PhMKPg400.3.20,00-B116 5343-47213-xx 20 21.5 3 x 132.6 28.8/29.9 116 x 160 1.6 4 PhMKPg400.3.25,00-B116 5343-47215-xx 25 26.9 3 x 165.8 36.1/37.4 116 x 190 1.9 4 PhMKPg400.3.30,00-B136 5343-47500-xx 30 32.3 3 x 198.9 43.3/44.9 136 x 190 2.0 5 Notes • Other voltage ratings, outputs, and frequencies upon request. All PhMKP-type capacitors may be also be applied in 60 Hz networks, output and current will, however, be 20 % higher in these cases (i.e. additional thermal load and therefore, a lower class of temperature must be taken into account) (1) Version no. xx may differ as it respects small changes, e.g. on the label Revision: 04-Jun-14 Document Number: 13004 23 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., PhMKPg..., Cylindrical, LVAC www.vishay.com Vishay ESTA 3-PHASE CAPACITORS IP20, DRY RATED VOLTAGE 440 V, 50 Hz, DELTA CONNECTION, UL/ULC CAN BE USED ALSO FOR 415 V TYPE ARTICLE NO. (1) OUTPUT kvar 440 V OUTPUT kvar 415 V CAP. μF CURRENT A 440 V/415 V DIMENSIONS ØxH mm WEIGHT kg DRAWING NO. PhMKPg440.3.02,50-A64 5343-48222-xx 2.5 2.2 3 x 13.7 3.3/3.1 64 x 190 0.6 1 PhMKPg440.3.05,00-A64 5343-48209-xx 5 4.4 3 x 27.4 6.6/6.1 64 x 190 0.6 1 PhMKPg440.3.08,33-A64 5343-48210-xx 8.33 7.4 3 x 45.7 10.9/10.3 64 x 190 0.6 1 PhMKPg440.3.10,00-A64 5343-48211-xx 10 8.9 3 x 54.8 13.1/12.4 64 x 265 0.8 1 PhMKPg440.3.11,20-A64 5343-48212-xx 11.2 10 3 x 61.4 14.7/13.9 64 x 265 0.8 1 PhMKPg440.3.12,50-A64 5343-48213-xx 12.5 11.1 3 x 68.5 16.4/15.4 64 x 265 0.8 1 PhMKPg440.3.14,00-A64 5343-48214-xx 14 12.5 3 x 76.7 18.4/17.4 64 x 265 1.0 1 PhMKPg440.3.12,50-A84 5343-48509-xx 12.5 11.1 3 x 68.5 16.4/15.5 84.4 x 190 1.0 3 PhMKPg440.3.14,10-A84 5343-48510-xx 14.1 12.5 3 x 77.0 18.5/17.5 84.4 x 190 1.1 3 PhMKPg440.3.15,00-A84 5343-48511-xx 15 13.3 3 x 82.2 19.7/18.6 84.4 x 190 1.1 3 PhMKPg440.3.16,90-A84 5343-48512-xx 16.9 15 3 x 92.6 22.2/20.9 84.4 x 190 1.2 3 PhMKPg440.3.18.80-A84 5343-48513-xx 18.8 16.67 3 x 103.0 24.7/23.3 84.4 x 265 1.3 3 PhMKPg440.3.20,00-A84 5343-48514-xx 20 17.8 3 x 109.6 26.2/24.8 84.4 x 265 1.4 3 PhMKPg440.3.22,50-A84 5343-48515-xx 22.5 20 3 x 123.3 29.5/27.8 84.4 x 265 1.4 3 PhMKPg440.3.25,00-A84 5343-48516-xx 25 22.2 3 x 137.0 32.8/30.9 84.4 x 265 1.5 3 PhMKPg440.3.28,10-A84 5343-48517-xx 28.1 25 3 x 154.0 36.9/34.8 84.4 x 265 1.5 3 PhMKPg440.3.30,00-A84 5343-48518-xx 30 26.7 3 x 164.4 39.4/37.1 84.4 x 340 1.8 3 PhMKPg440.3.14,10-B116 5343-47269-xx 14.1 12.5 3 x 77.0 18.5/17.5 116 x 160 1.0 4 PhMKPg440.3.18,80-B116 5343-47217-xx 18.8 16.67 3 x 103.0 24.7/23.3 116 x 160 1.5 4 PhMKPg440.3.20,00-B116 5343-47218-xx 20 17.8 3 x 109.6 26.2/24.8 116 x 160 1.6 4 PhMKPg440.3.22,50-B116 5343-47219-xx 22.5 20 3 x 123.3 29.5/27.8 116 x 160 1.6 4 PhMKPg440.3.25,00-B116 5343-47220-xx 25 22.2 3 x 137.0 32.8/30.9 116 x 190 1.7 4 PhMKPg440.3.28,10-B116 5343-47205-xx 28.1 25 3 x 154.0 36.9/34.8 116 x 190 1.6 4 PhMKPg440.3.30,00-B136 5343-47501-xx 30 26.7 3 x 164.4 39.4/37.1 136 x 190 1.9 5 PhMKPg440.3.33,00-B136 5343-47502-xx 33 29.4 3 x 180.9 43.3/40.9 136 x 190 2.0 5 Notes • Other voltage ratings, outputs, and frequencies upon request. All PhMKP-type capacitors may be also be applied in 60 Hz networks, output and current will, however, be 20 % higher in these cases (i.e. additional thermal load and therefore, a lower class of temperature must be taken into account) (1) Version no. xx may differ as it respects small changes, e.g. on the label Revision: 04-Jun-14 Document Number: 13004 24 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., PhMKPg..., Cylindrical, LVAC www.vishay.com Vishay ESTA 3-PHASE CAPACITORS IP20, DRY RATED VOLTAGE 525 V, 50 Hz, DELTA CONNECTION, UL/ULC CAN BE USED ALSO FOR 480 V TYPE ARTICLE NO. (1) OUTPUT OUTPUT kvar kvar 525 V 480 V CAP. μF CURRENT A 525 V/480 V DIMENSIONS ØxH mm WEIGHT kg DRAWING NO. PhMKPg525.3.03,00-A64 5343-48215-xx 3 2.5 3 x 11.5 3.3/3.0 64 x 190 0.6 1 PhMKPg525.3.05,00-A64 5343-48216-xx 5 4.2 3 x 19.2 5.5/5.0 64 x 190 0.6 1 PhMKPg525.3.08,33-A64 5343-48217-xx 8.33 7 3 x 32.1 9.2/8.4 64 x 190 0.6 1 PhMKPg525.3.10,00-A64 5343-48218-xx 10 8.33 3 x 38.5 11.0/10.1 64 x 265 0.7 1 PhMKPg525.3.10,00-A84 5343-48519-xx 10 8.33 3 x 38.5 11.0/10.1 84.4 x 190 0.8 3 PhMKPg525.3.12,50-A84 5343-48520-xx 12.5 10.4 3 x 48.1 13.7/12.6 84.4 x 190 1.0 3 PhMKPg525.3.13.80-A84 5343-48521-xx 13.8 11.5 3 x 53.1 15.2/13.8 84.4 x 190 1.0 3 PhMKPg525.3.15,00-A84 5343-48522-xx 15 12.5 3 x 57.7 16.5/15.0 84.4 x 190 1.2 3 PhMKPg525.3.20,00-A84 5343-48523-xx 20 16.7 3 x 77.0 22.0/20.1 84.4 x 265 1.3 3 PhMKPg525.3.25,00-A84 5343-48524-xx 25 20.9 3 x 96.2 27.5/25.1 84.4 x 265 1.5 3 PhMKPg525.3.20,00-B116 5343-47266-xx 20 16.7 3 x 77.0 22.0/20.1 116 x 160 1.4 4 PhMKPg525.3.25,00-B116 5343-47227-xx 25 20.9 3 x 96.2 27.5/25.1 116 x 190 1.5 4 PhMKPg525.3.30,00-B116 5343-47267-xx 30 25.1 3 x 115.4 33.0/30.2 116 x 230 2.0 4 PhMKPg525.3.30,00-B136 5343-47503-xx 30 25.1 3 x 115.4 33.0/30.2 136 x 190 1.8 5 PhMKPg525.3.35,90-B116 5343-47271-xx 35.9 30 3 x 138.2 39.5/36.1 116 x 265 2.1 4 PhMKPg525.3.35,90-B136 5343-47504-xx 35.9 30 3 x 138.2 39.5/36.1 136 x 230 2.1 5 PhMKPg525.3.37,10-B116 5343-47272-xx 37.1 31 3 x 142.8 40.8/37.3 116 x 265 2.2 4 PhMKPg525.3.37,10-B136 5343-47505-xx 37.1 31 3 x 142.8 40.8/37.3 136 x 230 2.2 5 Notes • Other voltage ratings, outputs, and frequencies upon request. All PhMKP-type capacitors may be also be applied in 60 Hz networks, output and current will, however, be 20 % higher in these cases (i.e. additional thermal load and therefore, a lower class of temperature must be taken into account) (1) Version no. xx may differ as it respects small changes, e.g. on the label Revision: 04-Jun-14 Document Number: 13004 25 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., PhMKPg..., Cylindrical, LVAC www.vishay.com Vishay ESTA 3-PHASE CAPACITORS IP20, DRY RATED VOLTAGE 660 V, 50 Hz, 64/84: DELTA CONNECTION, 116/136: STAR CONNECTION, UL/ULC UP TO 660 V CAN BE USED ALSO FOR 690 V, FULL OVER VOLTAGE RANGE TYPE ARTICLE NO. (1) OUTPUT OUTPUT kvar kvar 660 V 690 V CAP. μF CURRENT DIMENSIONS WEIGHT A ØxH kg 660 V/690 V mm DRAWING NO. PhMKPg660.3.05,00-A64 5343-48219-xx 5 5.5 3 x 12.2 4.4/4.6 64 x 190 0.6 1 PhMKPg660.3.08,33-A64 5343-48220-xx 8.33 9.1 3 x 20.3 7.3/7.6 64 x 265 0.8 1 PhMKPg660.3.08,33-A84 5343-48525-xx 8.33 9.1 3 x 20.3 7.3/7.6 84.4 x 190 0.9 3 PhMKPg660.3.10,00-A84 5343-48526-xx 10 10.9 3 x 24.4 8.7/9.1 84.4 x 190 1.1 3 PhMKPg660.3.12,50-A84 5343-48527-xx 12.5 13.7 3 x 30.4 10.9/11.4 84.4 x 265 1.2 3 PhMKPg660.3.15,00-A84 5343-48528-xx 15 16.4 3 x 36.5 13.1/13.7 84.4 x 265 1.4 3 PhMKPg660.3.16,70-A84 5343-48529-xx 16.7 18.3 3 x 40.7 14.6/15.3 84.4 x 265 1.5 3 PhMKPg660.3.20,00-A84 5343-48530-xx 20 21.9 3 x 48.7 17.5/18.3 84.4 x 340 1.7 3 PhMKPg660.3.22,90-A84 5343-48531-xx 22.9 25 3 x 55.8 20/20.9 84.4 x 340 1.9 3 PhMKPg660.2.12,50-B116 5343-47255-xx 12.5 13.7 3 x 91.4 10.9/11.4 116 x 160 1.6 4 PhMKPg660.2.15,00-B116 5343-47256-xx 15 16.4 3 x 109.6 13.1/13.7 116 x 160 1.6 4 PhMKPg660.2.16,70-B116 5343-47257-xx 16.7 18.3 3 x 122.1 14.6/15.3 116 x 160 1.7 4 PhMKPg660.2.20,00-B116 5343-47259-xx 20 21.9 3 x 146.2 17.5/18.3 116 x 190 1.8 4 PhMKPg660.2.22,90-B116 5343-47273-xx 22.9 25 3 x 167.3 20/20.9 116 x 190 1.7 4 PhMKPg660.2.25,00-B136 5343-47506-xx 25 27.3 3 x 182.6 21.9/22.9 136 x 190 1.6 5 PhMKPg660.2.30,00-B136 5343-47507-xx 30 32.8 3 x 219.2 26.2/27.4 136 x 230 2.2 5 RATED VOLTAGE 690 V, 50 Hz, 64/84: DELTA CONNECTION, 116/136: STAR CONNECTION CAN BE USED ALSO FOR 660 V TYPE ARTICLE NO. (1) OUTPUT OUTPUT kvar kvar 690 V 660 V CAP. μF CURRENT A 690 V/660 V DIMENSIONS ØxH mm WEIGHT kg DRAWING NO. PhMKPg690.3.10,00-A64 5343-48221-xx 10 9.1 3 x 22.3 8.4/8.0 64 x 265 0.9 1 PhMKPg690.3.12,50-A84 5343-48532-xx 12.5 11.4 3 x 27.9 10.5/10.0 84.4 x 265 1.1 3 PhMKPg690.3.15,00-A84 5343-48533-xx 15 13.7 3 x 33.4 12.5/12.0 84.4 x 265 1.3 3 PhMKPg690.3.20,00-A84 5343-48534-xx 20 18.3 3 x 44.6 16.7/16.0 84.4 x 340 1.6 3 PhMKPg690.3.25,00-A84 5343-48535-xx 25 22.9 3 x 55.7 20.9/20.0 84.4 x 340 1.9 3 PhMKPg690.2.12,50-B116 5343-47274-xx 12.5 11.4 3 x 83.6 10.5/10.0 116 x 160 1.2 4 PhMKPg690.2.15,00-B116 5343-47275-xx 15 13.7 3 x 100.3 12.5/12.0 116 x 160 1.3 4 PhMKPg690.2.20,00-B116 5343-47276-xx 20 18.3 3 x 133.7 16.7/16.0 116 x 190 1.5 4 PhMKPg690.2.25,00-B116 5343-47277-xx 25 22.9 3 x 167.3 20.9/20.0 116 x 190 1.6 4 Notes • Other voltage ratings, outputs, and frequencies upon request. All PhMKPg-type capacitors may be also be applied in 60 Hz networks, output and current will, however, be 20 % higher in these cases (i.e. additional thermal load and therefore, a lower class of temperature must be taken into account) (1) Version no. xx may differ as it respects small changes, e.g. on the label Revision: 04-Jun-14 Document Number: 13004 26 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., PhMKPg..., Cylindrical, LVAC www.vishay.com Vishay ESTA 1-PHASE CAPACITORS OIL RATED VOLTAGE 230 V, 50 Hz, UL/ULC TYPE IP20 PhMKP230.1.02,50-A64 PhMKP230.1.03,33-A64 PhMKP230.1.04,17-A64 PhMKP230.1.05,00-A84 IP00 PhMKP230.1.05,00-84 DIMENSIONS WEIGHT DRAWING PROTECTIVE ØxH kg NO. CLASS (mm) ARTICLE NO. (1) OUTPUT kvar CAP. μF CURRENT A 5341-48322-xx 5341-48323-xx 5341-48324-xx 2.5 3.33 4.17 150.0 200.4 251.0 10.9 14.5 18.1 64 x 140 64 x 190 64 x 190 0.6 0.7 0.8 1 1 1 IP20 IP20 IP20 5341-48636-xx 5 300.0 21.7 84.4 x 140 0.9 3 IP20 5341-44436-xx 5 300.0 21.7 84.4 x 140 0.9 2 IP00 RATED VOLTAGE 400 V, 50 Hz, UL/ULC CAN BE USED ALSO FOR 415 V, FULL OVER VOLTAGE RANGE TYPE IP20 PhMKP400.1.02,50-A64 PhMKP400.1.03,33-A64 PhMKP400.1.05,00-A64 PhMKP400.1.06,67-A64 PhMKP400.1.08,33-A64 PhMKP400.1.10,00-A64 PhMKP400.1.08,33-A84 PhMKP400.1.10,00-A84 PhMKP400.1.16,70-A84 IP00 PhMKP400.1.08,33-84 PhMKP400.1.10,00-84 PhMKP400.1.16,70-84 ARTICLE NO. (1) OUTPUT OUTPUT kvar kvar 400 V 415 V CAP. μF CURRENT DIMENSIONS WEIGHT DRAWING PROTECTIVE A ØxH kg NO. CLASS 400 V/415 V mm 5341-48325-xx 5341-48326-xx 5341-48327-xx 5341-48328-xx 5341-48329-xx 5341-48330-xx 2.5 3.33 5 6.67 8.33 10 2.7 3.6 5.4 7.2 9 10.8 49.7 66.2 99.5 132.7 165.7 198.9 6.3/6.5 8.3/8.6 12.5/13.0 16.7/17.3 20.8/21.6 25.0/25.9 64 x 82 64 x 109 64 x 140 64 x 190 64 x 190 64 x 240 0.3 0.4 0.5 0.7 0.8 0.9 1 1 1 1 1 1 IP20 IP20 IP20 IP20 IP20 IP20 5341-48637-xx 5341-48638-xx 5341-48639-xx 8.33 10 16.7 9 10.8 18 165.7 198.9 332.2 20.8/21.6 25.0/25.9 41.7/43.3 84.4 x 140 84.4 x 140 84.4 x 240 0.9 1.0 1.3 3 3 3 IP20 IP20 IP20 5341-44437-xx 5341-44438-xx 5341-44439-xx 8.33 10 16.7 9 10.8 18 165.7 198.9 332.2 20.8/21.6 25.0/25.9 41.7/43.3 84.4 x 140 84.4 x 140 84.4 x 240 0.9 1.0 1.3 2 2 2 IP00 IP00 IP00 RATED VOLTAGE 525 V, 50 Hz, UL/ULC CAN BE USED ALSO FOR 480 V TYPE IP20 PhMKP525.1.05,00-A64 PhMKP525.1.08,33-A64 PhMKP525.1.10,00-A64 PhMKP525.1.16,70-A84 PhMKP525.1.20,00-A84 IP00 PhMKP525.1.16,70-84 PhMKP525.1.20,00-84 ARTICLE NO. (1) OUTPUT OUTPUT kvar kvar 525 V 480 V CAP. μF CURRENT DIMENSIONS WEIGHT DRAWING PROTECTIVE A ØxH kg NO. CLASS 525 V/480 V mm 5341-48331-xx 5341-48332-xx 5341-48333-xx 5 8.33 10 4.2 7.0 8.4 57.7 96.2 115.5 9.5/8.8 15.9/14.6 19.0/17.5 64 x 140 64 x 190 64 x 240 0.5 0.7 0.9 1 1 1 IP20 IP20 IP20 5341-48640-xx 5341-48641-xx 16.7 20 14.0 16.7 192.9 231.0 31.6/29.2 38.0/34.8 84.4 x 240 84.4 x 240 1.3 1.3 3 3 IP20 IP20 5341-44440-xx 5341-44441-xx 16.7 20 14.0 16.7 192.9 231.0 31.6/29.2 38.0/34.8 84.4 x 240 84.4 x 240 1.3 1.3 2 2 IP00 IP00 Notes • Other voltage ratings, outputs, and frequencies upon request. All PhMKP-type capacitors may be also be applied in 60 Hz networks, output and current will, however, be 20 % higher in these cases (i.e. additional thermal load and therefore, a lower class of temperature must be taken into account) (1) Version no. xx may differ as it respects small changes, e.g. on the label Revision: 04-Jun-14 Document Number: 13004 27 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., PhMKPg..., Cylindrical, LVAC www.vishay.com Vishay ESTA DIMENSIONS Required space tear-off way Ø 66 ± 0.8 50 ± 0.5 34 ± 1 25 H ± 1.5 10.7 ± 1 Ø 84.4 Ø 84.4 16- 1 16- 1 0 88.2 ± 0.5 13 13 38.7 Clamp-combi -screw M5 x 12 Drawing 1 Drawing 2 Drawing 3 Required space tear-off way Ø 136 0 16-1 0 16-1 H ± 1.5 Ø 116 Terminal D-352 12 ± 1 12.4 ± 1 39 ± 1 25 Required space tear-off way Terminal D-352 39 ± 1 25 44.8 88.2 ± 0.2 67.6 ± 0.5 44.8 21.2 13 13 38.7 M12 Torque 10 Nm M12 Torque 10 Nm 21.2 16- 1 M12 Torque 10 Nm H ± 1.5 Terminal D-351 0 Ø 64 13.5 ± 0.5 H ± 1.5 25.5 ± 0.5 12 ± 1 25 Terminal D-351 Required space tear-off way 0 H ± 1.5 35.5 ± 1 25 Required space tear-off way M12 48 48 19.2 19.2 M12 1414 43.3 1414 43.3 Drawing 5 Drawing 4 ORDERING INFORMATION TECHNICAL UNITS Full cardboard boxes: Revision: 04-Jun-14 Ø 64 mm - 9 pcs per carton Ø 84.4 mm - 4 pcs per carton Ø 116 mm - 4 pcs per carton Ø 136 mm - 2 pcs per carton Document Number: 13004 28 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKDg..., Triangular, LVAC www.vishay.com Vishay ESTA ESTAdry D-Type, LVAC Power Capacitors FEATURES • Self-healing technology • Over pressure tear-off fuse • Smallest available height for 50 kvar units: 210 mm (+68 mm for terminals) • Excellent heat dissipation • Screw-on terminal with M10 bolts • Resin filling provides thermal conductivity similar to that of oil-filled capacitors • Aluminum case is welded and hermetically sealed • No paint required for OUTDOOR application • UL and cUL approved APPLICATIONS • Areas with dust and moisture, which require a high degree of protection and high creepage distances. Also for OUTDOOR • Free standing, fixed individual-PFC (e.g. motors, lighting, transformers) • Automatic central-PFC (e.g. group of loads) • Harmonic trap (e.g. UPS, frequency drives, converter) • Pole mounted PFC QUICK REFERENCE DATA Series PhMKDg…, triangular PhMKDgF…, triangular ESTAdry D-type, LVAC power capacitors dry - INDOOR, IP00 ESTAdry D-type, LVAC power capacitors dry - OUTDOOR, IP00 Capacitors, fixed, low voltage Capacitors, fixed, low voltage MKP, metallized polypropylene film MKP, metallized polypropylene film 1000 1000 Capacitance min. (μF) 3-phase D: 3 x 115.5, 3-phase Y: 3 x 140.1 3-phase D: 3 x 115.5, 3-phase Y: 3 x 140.1 Capacitance max. (μF) 3-phase D: 3 x 331.6, 3-phase Y: 3 x 334.3 3-phase D: 3 x 331.6, 3-phase Y: 3 x 334.3 Description Type Technology Voltage max. (V) Output min. (kvar) 30 30 Output max. (kvar) 56.2 56.2 Revision: 14-Mar-14 Document Number: 13007 29 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKDg..., Triangular, LVAC www.vishay.com CAPACITORS IN TRIANGULAR CASING Vishay ESTA 3-PHASE CAPACITOR, INDOOR DESCRIPTION The PhMKDg series capacitor in a triangular aluminum case with a standard rating of 50 kvar, augments Vishay ESTA broad line of reliable three-phase power capacitors. The PhMKDg series is preceded by our PhMKP and the ESTAdry PhMKPg series in aluminum tubular casings, with outputs up to 37 kvar, depending on their rated voltage. The standard PhMKDg series capacitor is designed for indoor application, with externally arranged discharge resistors (U 50 V/60 s). For outdoor application, the discharge resistors can be incorporated internally (U 75 V/180 s). Also, the pure aluminum welded cases render these capacitors perfectly suitable for outdoor use. The PhMKDg capacitor can be used for both controlled equipment and for stationary or mobile fixed compensation, e.g. for induction-motor-operated conveyer belts in the mining industry. The indoor capacitor can be supplied with the option of a small protective cover for each individual connection or with an IP53-type overall protective cover. The triangular case and corresponding triangular arrangement of the winding elements allows for simple connection in parallel of several units (IN-LINE). The joint insulation created by means of a solid ceramic terminal base with high surface-creepage resistance and very long tracking paths establishes an additionally superior mechanical stability for the three solid connector bolts. With a resin filled pure aluminum case offering superior mechanical stability, low profile design, excellent thermal conductance, easy paralleling and a complete three-phase tear-off fuse system incorporated into the PhMKDg design, this series is the ideal first choice for new designs and applicable retrofit requirements. Revision: 14-Mar-14 Single bolt protection IP53 3-PHASE CAPACITOR, OUTDOOR Document Number: 13007 30 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKDg..., Triangular, LVAC www.vishay.com Vishay ESTA ESTAdry D-TYPE PhMKDg, INDOOR TECHNICAL DATA STANDARDS IEC 60831-1 + 2, EN 60831-1 + 2, UL810 LATEST EDITION UL/ULC FILE # E97723 Overvoltages (in accordance with the above standards) Ucn + 10 % (up to 8 h daily) Ucn + 15 % (up to 30 min daily) Ucn + 20 % (up to 5 min, only 200 times in the life of the capacitor) Ucn + 30 % (up to 1 min, only 200 times in the life of the capacitor) Please also refer to “Terms and Definitions”. Overcurrent (in accordance with the above standards) 1.3 x In, 1.43 x In with 10 % overvoltages, 10 % over capacitance and harmonics included, continuous operation Please also refer to “Terms and Definitions”. Tolerance on capacitance -5 %/+10 % in accordance with the standards ± 5 % as Vishay ESTA standard Test voltage, terminal/terminal 2.15 x Ucn, VAC, 2 s (routine test) Test voltage, terminal/casing 6000 VAC , 2 s (routine test) Inrush current 300 times rated current In Losses 0.4 W/kvar to 0.5 W/kvar (without discharge resistors) Statistical life expectancy > 130 000 operating h (ESTAdry) Degree of protection IP00 (terminal cover for higher protection class upon request), indoor Ambient temperature category -25/D (max. 55 °C), (-40/D on request) Permitted casing temperature Max. 65 °C (measured on top of the can) Cooling Naturally air-cooled Permissible relative humidity Maximum 95 % Maximum allowed altitude 2000 m above sea level Mounting position Vertical and horizontal Mounting and grounding Threaded M12 stud at the bottom of the container Safety features All-phase overpressure tear-off fuse, self-healing Casing Aluminum can, welded top Dielectric Polypropylene film, self-healing Filling agent Resin-filled (ESTAdry), non-PCB, non-toxic Terminals Threaded studs M10 3-PHASE CAPACITORS IN TRIANGULAR CASING, INDOOR ARTICLE NO. (1) RATED VOLTAGE V RATED OUTPUT kvar CAPACITANCE μF CURRENT A (50 Hz) WEIGHT kg HEIGHT H mm PhMKDg400.3.50,00-K 5345-44814-xx 400 50 3 x 331.6 72.2 4.0 210 PhMKDg440.3.50,00-K 5345-44804-xx 440 50 3 x 274.0 65.6 4.0 210 PhMKDg440.3.56,20-K 5345-44805-xx 440/415 56.2/50 3 x 308.0 73.7/69.6 4.0 210 PhMKDg460.3.50,00-K 5345-44803-xx 460 50 3 x 250.7 62.8 4.0 210 PhMKDg525.3.50,00-K 5345-44806-xx 525 50 3 x 192.5 55.0 4.0 210 PhMKDg690.2.50,00-K 5345-44807-xx 690 50 3 x 334.3 Y 41.8 4.0 210 PhMKDg760.2.50,00-K 5345-44808-xx 760 50 3 x 275.5 Y 38.0 4.0 210 TYPE ORDERING INFORMATION Packing units 1 piece per carton Notes • Other volltage ratings, outputs, and frequencies on request. (1) Version no. xx may differ as it respects small changes, e.g. on the label Revision: 14-Mar-14 Document Number: 13007 31 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKDg..., Triangular, LVAC www.vishay.com Vishay ESTA DIMENSIONS, INDOOR M10 Screw bolt M10 brass blank Hexagonal nut M10 DIN 934 steel hot dip galvaniced Spring washer wave B10 DIN 137 steel hot dip galvaniced Hexagonal nut M10 DIN 934 steel hot dip galvaniced Hexagon thin nut M10 DIN 439 A2 35 + 1 51 ± 2 68 ± 2 25 Required space for bulging 15.8 + 1 H±1 Screw bolt M8x15 steel hot dip galvaniced Toothed lock washer Hexagonal nut M12 M12 172 78 160 70 Drawing 6 DISCHARGE RESISTORS Δ Y RECOMMENDED TORQUES STYLE RECOMMENDED TORQUE Terminals M8 6 Nm Terminals M10 (new K-type PhMKDg...-K) 20 Nm M12 mounting stud 10 Nm Revision: 14-Mar-14 Document Number: 13007 32 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKDg..., Triangular, LVAC www.vishay.com Vishay ESTA ESTAdry D-TYPE PhMKDgF, LVAC POWER CAPACITORS, OUTDOOR TECHNICAL DATA STANDARDS IEC 60831-1 + 2, EN 60831-1 + 2, LATEST EDITION Overvoltages (in accordance with the above standards) Ucn + 10 % (up to 8 h daily) Ucn + 15 % (up to 30 min daily) Ucn + 20 % (up to 5 min, only 200 times in the life of the capacitor) Ucn + 30 % (up to 1 min, only 200 times in the life of the capacitor) Please also refer to “Terms and Definitions”. Overcurrent (in accordance with the above standards) 1.3 x In, 1.43 x In with 10 % overvoltages, 10 % over capacitance and harmonics included, continuous operation “Please also refer to Terms and Definitions”. Tolerance on capacitance -5 %/+10 % in accordance with the standards ± 5 % as Vishay ESTA standard Test voltage, terminal/terminal 2.15 x Ucn, VAC, 2 s (routine test) Test voltage, terminal/casing 6000 VAC, 2 s (routine test) Inrush current 300 times rated current In Losses 0.4 W/kvar to 0.5 W/kvar (without discharge resistors) Statistical life expectancy > 130 000 operating h (ESTAdry) Degree of protection IP00 outdoor Ambient temperature category -25/D (max. 55 °C), (-40/D on request) Permitted casing temperature Max. 65 °C (measured on top of the can) Cooling Naturally air-cooled Permissible relative humidity Maximum 95 % Maximum allowed altitude 2000 m above sea level Mounting position Vertical and horizontal Mounting and grounding Threaded M12 stud at the bottom of the container Safety features All-phase overpressure tear-off fuse, self-healing Casing Aluminum can, welded top Dielectric Polypropylene film, self-healing Filling agent Resin-filled (ESTAdry), non-PCB, non-toxic Terminals Threaded studs M10 Available types same as for indoor use, different type designation “F”. For example: TYPE PhMKDgF460.3.50 RATED VOLTAGE V RATED OUTPUT kvar CAPACITANCE μF CURRENT A (50 Hz) WEIGHT kg HEIGHT H mm 460 50 3 x 250.7 62.8 4.0 210 ORDERING INFORMATION Packing units 1 piece per carton RECOMMENDED TORQUES STYLE RECOMMENDED TORQUE Terminals M8 6 Nm Terminals M10 10 Nm M12 mounting stud 10 Nm Note • Other voltage ratings, output, and frequencies upon request Revision: 14-Mar-14 Document Number: 13007 33 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKDg..., Triangular, LVAC www.vishay.com Vishay ESTA +1 DIMENSIONS, OUTDOOR Hexagonal nut M12 Toothed lock washer +2 44 - 2 +2 68 - 2 H ±1 15.8 M12 Screw bolt M8 X 10 Slotted nut M10 Spring washer wave Hexagonal-nut M10 Screw bolt M10 M10 X 172 70 78 160 X: Drawing 7 ACCESSORIES: SUPPORT FOR POLE AND WALL MOUNTING A-A 200 A M16 A Revision: 14-Mar-14 Document Number: 13007 34 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., Rectangular, LVAC www.vishay.com Vishay ESTA LVAC Power Capacitors FEATURES • Self-healing technology • Over pressure tear-off fuse • Robust steel container • Massive connection studs APPLICATIONS • Areas with dust and moisture, which require a high degree of protection and high creepage distances • Free standing, fixed individual-PFC (e.g. motors, lighting, transformers) • Automatic central-PFC (e.g. group of loads) • Harmonic trap (e.g. UPS, frequency drives, converter) QUICK REFERENCE DATA Series Description Type Technology Voltage max. (V) PhMKP…, rectangular LVAC power capacitors - oil/dry - INDOOR, IP00 - IP43 Capacitors, fixed, low voltage MKP, metallized polypropylene film 690 Capacitance min. (μF) 3-phase D: 3 x 22.3 Capacitance max. (μF) 3-phase D: 3 x 663 Output min. (kvar) 10 Output max. (kvar) 100 Revision: 07-Mar-14 Document Number: 13005 35 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., Rectangular, LVAC www.vishay.com Vishay ESTA CAPACITORS IN RECTANGULAR CASING DESCRIPTION ESTAprop PhMKP-type capacitors in rectangular steel casing have been designed for power factor correction in low voltage plants. Loads as motors and transformers consume real power as well as reactive power. Generators, supply cables, and other electrical distribution equipment should be relieved from reactive power. RECTANGULAR CAPACITOR, IP43 DESIGN The ESTAprop MKP capacitor in steel casing consists of a number of three-phase tubular can type capacitors (see PhMKP... Cylindrical Aluminum). The individual aluminum cans are wired together and mounted onto a steel frame. The steel frame together with the cans is housed in a common sheet steel casing. The supply cable may be connected at three threaded studs, on top of the capacitor. A threaded stud M10 for grounding is available. Easy mounting will be ensured by 4 drillings, at the bottom of the container. This design ensures highest safety by: RECTANGULAR CAPACITOR, BE-TYPE, IP00 • self-healing technology • over pressure tear-off fuse • robust steel container • massive connection studs Revision: 07-Mar-14 Document Number: 13005 36 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., Rectangular, LVAC www.vishay.com Vishay ESTA TECHNICAL DATA STANDARDS IEC 60831-1 + 2, EN 60831-1 + 2, LATEST EDITIONS Overvoltages (in accordance with the above standards) Ucn + 10 % (up to 8 h daily) Ucn + 15 % (up to 30 min daily) Ucn + 20 % (up to 5 min, only 200 times in the life of the capacitor) Ucn + 30 % (up to 1 min, only 200 times in the life of the capacitor) Please also refer to “Terms and Definitions”. Overcurrent (in accordance with the above standards) 1.3 x In, 1.43 x In with 10 % overvoltages, 10 % overcapacitance and harmonics included, continuous operation Please also refer to “Terms and Definitions”. Tolerance on capacitance -5 %/+10 % in accordance with the standards ± 5 % as Vishay ESTA standard Test voltage, terminal/terminal 2.15 x Ucn, VAC, 2 s (routine test) Test voltage, terminal/casing 4800 VAC, 2 s (routine test) Inrush current 300 times rated current in Losses < 0.50 W/kvar Statistical life expectancy > 100 000 operating hours Degree of protection IP00, IP43, indoor mounting Permitted ambient temperature -25 °C/up to 55 °C (depending on output) Permitted casing temperature Max. 60 °C (measured on top of the capacitor) Cooling Naturally air-cooled Permissible relative humidity Maximum 95 % Maximum allowed altitude 2000 m above sea level Mounting position Vertical and horizontal Mounting 4 drillings, Ø 9 mm, at the bottom of the container Safety features All-phase over pressure tear-off fuse, self-healing Casing Sheet steel casing, color RAL 7033 Dielectric Polypropylene film, self-healing Filling agent (of the tubular capacitors inside) Natural oil, non-PCB, biodegradable (ESTAprop) or dry/gas - filled (ESTAdry) Terminals Threaded studs, M12 Revision: 07-Mar-14 Document Number: 13005 37 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., Rectangular, LVAC www.vishay.com Vishay ESTA CAPACITORS IN RECTANGULAR STEEL CASING, IP43 RATED VOLTAGE 400 V ARTICLE NO. (2) TYPE PhMKP400/10 (1), 50 Hz, 3-PHASE, DELTA CONNECTION OUTPUT CAPACITANCE kvar μF 3 x 66.3 CURRENT A (50 Hz) DIMENSIONS LxWxH mm PREVIOUS CABLE ENTRY NEW CABLE ENTRY 14.4 260 x 135 x 525 LT21 M32 WEIGHT DRAWING kg NO. 5342-42001-xx 10 5 8 PhMKP400/12,5 5342-42002-xx 12.5 3 x 82.9 18 260 x 135 x 525 LT21 M32 5 8 PhMKP400/15 5342-42003-xx 15 3 x 99.5 21.6 260 x 135 x 525 LT21 M32 6 8 PhMKP400/16,7 5342-42004-xx 16.7 3 x 110.7 24.1 260 x 135 x 525 LT21 M32 6 8 PhMKP400/20 5342-42005-xx 20 3 x 133 28.9 260 x 135 x 525 LT21 M32 6.5 8 PhMKP400/25 5342-42006-xx 25 3 x 166 36 260 x 135 x 525 LT21 M32 6.5 8 PhMKP400/30 5342-42007-xx 30 3 x 199 43.3 260 x 135 x 525 LT29 M40 8 8 PhMKP400/33,3 5342-42008-xx 33.3 3 x 221 48 260 x 135 x 525 LT29 M40 8 8 PhMKP400/40 5342-42009-xx 40 3 x 265 57.7 260 x 135 x 525 LT29 M40 9 8 PhMKP400/50 5342-42010-xx 50 3 x 332 72.2 260 x 135 x 525 LT29 M40 10 8 PhMKP400/60 5342-42011-xx 60 3 x 398 86.6 260 x 135 x 525 LT36 M50 11 8 PhMKP400/66,7 5342-42012-xx 66.7 3 x 442 96.3 260 x 135 x 525 LT36 M50 12.5 8 PhMKP400/70 5342-42013-xx 70 3 x 464 101 395 x 135 x 525 LT36 M50 13 8 PhMKP400/75 5342-42014-xx 75 3 x 497 108 395 x 135 x 525 LT36 M50 14 8 PhMKP400/83,3 5342-42015-xx 83.3 3 x 552 120 395 x 135 x 525 LT36 M50 15 8 PhMKP400/100 5342-42016-xx 100 3 x 663 144 395 x 135 x 525 LT42 M63 17 8 CAPACITORS IN RECTANGULAR STEEL CASING, IP00 RATED VOLTAGE 400 V TYPE (1), 50 Hz, 3-PHASE, DELTA CONNECTION ARTICLE NO. (2) OUTPUT kvar CAPACITANCE μF CURRENT A (50 Hz) DIMENSIONS LxWxH mm WEIGHT kg DRAWING NO. PhMKP400/10BE 5342-42121-xx 10 3 x 66.3 14.4 260 x 135 x 418 5 9 PhMKP400/12,5BE 5342-42122-xx 12.5 3 x 82.9 18 260 x 135 x 418 5 9 PhMKP400/15BE 5342-42123-xx 15 3 x 99.5 21.6 260 x 135 x 418 6 9 PhMKP400/16,7BE 5342-42124-xx 16.7 3 x 110.7 24.1 260 x 135 x 418 6 9 PhMKP400/20BE 5342-42125-xx 20 3 x 133 28.9 260 x 135 x 418 6.5 9 PhMKP400/25BE 5342-42126-xx 25 3 x 166 36 260 x 135 x 418 6.5 9 PhMKP400/30BE 5342-42127-xx 30 3 x 199 43.3 260 x 135 x 418 8 9 PhMKP400/33,3BE 5342-42128-xx 33.3 3 x 221 48 260 x 135 x 418 8 9 PhMKP400/40BE 5342-42129-xx 40 3 x 265 57.7 260 x 135 x 418 9 9 PhMKP400/50BE 5342-42130-xx 50 3 x 332 72.2 260 x 135 x 418 10 9 PhMKP400/60BE 5342-42131-xx 60 3 x 398 86.6 260 x 135 x 418 11 9 PhMKP400/66,7BE 5342-42132-xx 66.7 3 x 442 96.3 260 x 135 x 418 12.5 9 PhMKP400/70BE 5342-42133-xx 70 3 x 464 101 395 x 135 x 418 13 9 PhMKP400/75BE 5342-42134-xx 75 3 x 497 108 395 x 135 x 418 14 9 PhMKP400/83,3BE 5342-42135-xx 83.3 3 x 552 120 395 x 135 x 418 15 9 PhMKP400/100BE 5342-42136-xx 100 3 x 663 144 395 x 135 x 418 17 9 Notes • Other voltage ratings, outputs, and frequencies upon request. All PhMKP-type capacitors may be used for 60 Hz, the output will be 1.2 times higher. • All oil-impregnated part types can also be produced in a PhMKPg dry version. Dimensions and ratings are unchanged. Dry types are not standard stock items, with production upon request. (1) Can be used also for 415 V, with full overvoltage range. (2) Version no. xx may differ as it respects small changes, e.g. on the label. Revision: 07-Mar-14 Document Number: 13005 38 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP..., Rectangular, LVAC www.vishay.com Vishay ESTA DIMENSIONS Drawing 8 Drawing 9 Rectangular-type capacitor, three phase, IP43 Rectangular-type, BE-capacitor, three phase, IP00 418 mm high Drilling Ø 46 525525 L L 135 135 L 418 H 135 135 L 46 •• M12 M12 LL+24 + 24 LL+24 + 24 M10 M10 72 72 LL+42 + 42 M10 ••9 M10 75 6644 32 L+42 L+ 42 ••99 Ø 7 755 M12 75 43 32 32 43 221 221 RECOMMENDED TORQUES TERMINAL STYLE RECOMMENDED TORQUE Terminals M6 3 Nm Terminals M8 6 Nm Terminals M10 10 Nm Terminals M12 15.5 Nm CABLE GLANDS AND GASKETS OUTPUT IN kvar/400 V, 50 Hz PG DRILLING Ø IN mm (PG) M DRILLING Ø IN mm (M) 10 to 25 21 28.5 32 34 30 to 50 29 38 40 42 60 to 83.3 36 48 50 50.5 100 42 55 63 63.5 ORDERING INFORMATION MINIMUM ORDER QUANTITY PER TYPE AND ORDER 1 unit Revision: 07-Mar-14 DELIVERY TIME Delivery time is approximately 4 weeks Document Number: 13005 39 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP.../-DW, LVAC www.vishay.com Vishay ESTA LVAC DW-Type Filter Capacitors FEATURES • High output and high over-current design • Welded rectangular capacitors with 3 or 6 terminals • Overpressure monitoring device APPLICATIONS • Automatic and individual fixed Power Factor Correction in LVAC applications • Detuned and tuned filter applications to reduce harmonics in LVAC networks QUICK REFERENCE DATA Series Description Type Technology Voltage max. (V) PhMKP…/-DW DW-Type High Current Filter Capacitors - Oil/DRY - INDOOR, IP00, 3-phase/1-phase Capacitors, fixed, low voltage MKP, metallized polypropylene film 1000 Capacitance min. (μF) 1-phase: 200 μF, 3-phase D: 3 x 70 μF, 3-phase Y: 3 x 219 μF Capacitance max. (μF) 1-phase: 3600 μF, 3-phase D: 3 x 780 μF, 3-phase Y: 3 x 1700 μF Output min. (kvar) 30 Output max. (kvar) 450 Revision: 17-Mar-14 Document Number: 13006 40 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP.../-DW, LVAC www.vishay.com Vishay ESTA DW-FILTER TYPE CAPACITORS DESCRIPTION ESTAprop and ESTAdry DW-type capacitors in rectangular steel or Aluminum casing have been designed for high current filter circuit applications in low voltage plants. Loads such as frequency drives, converters, and other non-linear loads create harmonics. The purpose of tuned and detuned filters is the protection of electrical equipment and reduction of harmonics. DW-type capacitors have an excellent current-carrying capability and may be built for high voltages as well as high loads within one casing. DW-TYPE CAPACITOR, IP00, 6 TERMINALS DW-type capacitors may be used for: • fixed detuned power factor correction equipment • automatic detuned power factor correction equipment • tuned filter circuits DESIGN The DW-type capacitor is based on MKP-technology. The active element consists of metallized polypropylene film with self-healing properties. The current-carrying metal layer is vaporised onto one side of the polypropylene film. The front surface of tubular winding elements are joined by means of the metal spray method (schooping). A number of elements will be connected together to get the required capacitance. The entire winding package will be incorporated within a welded stainless steel casing. The casing is fitted with hermetically sealed bushings M12, for connection of the supply cable. A threaded stud M10 for grounding is provided. Easy mounting will be ensured by 4 drillings, Ø 9.8 mm, at the bottom of the container, or by side-brackets. This design ensures the highest safety by self-healing technology as well as by an over pressure monitoring device. In case of an internal failure, an over pressure may occur and operate a potential-free contact, which will (connected to a switching device like a contactor) disconnect the capacitor from the supply and thus protect the capacitor from bursting. Revision: 17-Mar-14 DW-TYPE CAPACITOR, IP00, 3 TERMINALS Document Number: 13006 41 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP.../-DW, LVAC www.vishay.com Vishay ESTA DW-TYPE FILTER CAPACITORS TECHNICAL DATA STANDARDS IEC 60831-1 + 2, EN 60831-1 + 2, LATEST EDITIONS Overvoltages (in accordance with the above standards) Ucn + 10 % (up to 8 h daily) Ucn + 15 % (up to 30 min daily) Ucn + 20 % (up to 5 min, only 200 times in the life of the capacitor) Ucn + 30 % (up to 1 min, only 200 times in the life of the capacitor) Please also refer to “Terms and Definitions”. Overcurrent (in accordance with the above standards) 1.3 x In, 1.43 x In with 10 % overvoltages, 10 % overcapacitance and harmonics included, continuous operation Please also refer to “Terms and Definitions”. Higher currents upon request! Tolerance on capacitance ± 5 % (very narrow tolerances of ± 3 % upon request) Test voltage, terminal/terminal 2.15 x Ucn, VAC, 2 s (routine test) Test voltage, terminal/casing 3600/7200 (/> 660 V) VAC, 2 s (routine test) Inrush current 300 times rated current Losses < 0.50 W/kvar (without discharge resistors) Statistical life expectancy > 150 000 operating h Degree of protection IP00, indoor mounting Permitted ambient temperature -25/up to D (max. 55 °C) Permitted casing temperature Max. 65 °C (measured on top of the capacitor) Cooling Naturally air-cooled Permissible relative humidity Max. 95 % Maximum allowed altitude 2000 m above sea level Mounting position Vertical or horizontal Mounting 4 drillings, Ø 9.8 mm Safety features Over pressure monitoring device, self-healing Casing Welded stainless sheet steel casing, color RAL 7033 or Aluminum casing (ESTAdry) Dielectric Polypropylene film, self-healing Filling agent Natural oil, non-PCB, biodegradable (ESTAprop) or dry/resin filled (ESTAdry) Terminals Threaded studs, M12 Revision: 17-Mar-14 Document Number: 13006 42 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKP.../-DW, LVAC www.vishay.com Vishay ESTA This capacitor type will be built upon customer request. With its narrow tolerances, it is ideal for use in filter circuit applications. Overcurrent loading in excess of standard figures is possible. Available voltage ratings are between 230 V and 1000 V. Output ratings are up to 500 kvar, depending on the voltage. The protection of DW-type capacitors is provided by an OVER PRESSURE MONITORING DEVICE, which must be connected to a contactor or breaker to switch off the unit in case of internal over pressure. DIMENSIONS FILTER CIRCUIT CAPACITORS The total output within one casing may be divided into two outputs and six bushings. Using such an “S”-type terminal arrangement may be of cost advantage when two outputs are required, but neither of them is large enough to fill up the capacitor casing. Drawing 10 DW-type with 3 terminals Drawing 11 DW-type with 6 terminals Pressure Monitoring Druckwächter Device M12 M12 3535 62.5 62,5 50 50 50 50 100 100 M12 M 12 2 H H ±5± 5 H- 1-10110 H 3 3355 6 26 26 75 ±5 75 ± 5 Anschluß Terminal Oblong Langloch hole Terminal M12 M 12 1111x15 x 15 40 •Ø•9 9 40 H ±5 H±5 HH --111010 Terminal 1 2 +2 7878+ 3388,.22 79 79 hole 11 x 15 ±2 321 ±2 321 5 4 50 50 50 50 75 75 M12 M 12 7788+2+ 2 3388., 22 oblong hole Oblong 75 75 135 135 7 7 99 2 x 2x9,8 9.8 40 ±2 321 321 ±2 20 67 50 50 50 20 67 50397 +2 397 + 2 Leistungsschild Rating Plate +3 430 +3 430 40 135 135 +3 345 345 +3 26 26 +3 345 +3 345 Rating Plate rating plate +3 430 430 +3 100 100 757 5++3 3 75 + 3 7 5 +3 Pressure Monitoring Pressure monitoring Device device +2 397 397 +2 RECOMMENDED TORQUES TERMINAL STYLE Terminals M6 RECOMMENDED TORQUE 3 Nm Terminals M8 6 Nm Terminals M10 10 Nm Terminals M12 15.5 Nm Revision: 17-Mar-14 Document Number: 13006 43 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I SHAY I NTE RTE CHNO L O GY, IN C . ViSHAY ProDUCTS SEMiCoNDUCTorS: Rectifiers • High-Power Diodes and Thyristors • Small-Signal Diodes • Zener and Suppressor Diodes • FETs • Optoelectronics • ICs • Modules PASSiVE CoMPoNENTS: Resistive Products • Magnetics • Capacitors worLD HEADQUArTErS Vishay intertechnology, inc. | 63 Lancaster Avenue Malvern, PA 19355-2143 | USA W O R L D W I D E S A L E S C O N TA C T S Visit www.vishay.com for product information or select below for a current list of sales offices, representatives, and distributors. THE AMEriCAS EUroPE UNiTED STATES GErMANY VISHAY AMERICAS P.O. BOX 3700 MOORESVILLE, NC 28117 UNITED STATES PH: +1-704-663-1870 FAX: +1-704-663-1870 VISHAY ELECTRONIC GMBH ESTA CAPACITORS DIVISION HOFMARK-AICH-STRASSE 36 84030 LANDSHUT GERMANY PH: +49-871-86-0 FAX: +49-871-86-25-06 ASiA SiNGAPorE VISHAY INTERTECHNOLOGY ASIA PTE LTD. 37A TAMPINES STREET 92 #07-00 SINGAPORE 528886 PH: +65-6788-6668 FAX: +65-6788-0988 P.r. CHiNA VISHAY CHINA CO., LTD. 15D, SUN TONG INFOPORT PLAZA 55 HUAI HAI WEST ROAD SHANGHAI 200030 P.R. CHINA PH: +86-21-5258 5000 FAX: +86-21-5258 7979 JAPAN FrANCE VISHAY S.A. 199, BLVD DE LA MADELEINE 06003 NICE, CEDEX 1 FRANCE PH: +33-4-9337-2727 FAX: +33-4-9337-2726 UNiTED KiNGDoM VISHAY LTD. SUITE 6C, TOWER HOUSE ST. CATHERINE’S COURT SUNDERLAND ENTERPRISE PARK SUNDERLAND SR5 3XJ UNITED KINGDOM PH: +44-191-516-8584 FAX: +44-191-549-9556 VISHAY JAPAN CO., LTD. SHIBUYA PRESTIGE BLDG. 4F 3-12-22, SHIBUYA SHIBUYA-KU TOKYO 150-0002 JAPAN PH: +81-3-5466-7150 FAX: +81-3-5466-7160 BUILD VISHAY © Copyright 2014 Vishay Intertechnology, Inc. ® Registered trademarks of Vishay Intertechnology, Inc. All rights reserved. Printed in Germany. Specifications subject to change without notice. DATA BOOK into your DESIGN VSE-DB0052-1406 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000