RoHS Power Chip Shielded Inductors Dimensions: Inches (mm) 0.485 12.3 0.197 5.0 0.315 8.0 0.485 12.3 Allied Part Number Inductance Tolerance (µh) (%) PCSDR127 0.299 7.6 Test Freq. KHz, 0.25V DCR (Ω) I rms (A) I sat (A) 100 100 100 100 100 0.0023 0.0031 0.0041 0.0048 0.0068 17.896 15.469 13.533 12.464 10.495 8.330 56.000 40.000 31.110 25.450 21.540 18.670 PCSDR127-R47T-RC PCSDR127-1R0T-RC PCSDR127-1R5T-RC PCSDR127-2R2T-RC PCSDR127-2R7T-RC 0.47 1.0 1.5 2.2 30 30 30 30 2.7 30 PCSDR127-3R9T-RC 3.9 0.0108 4.7 30 30 100 PCSDR127-4R7T-RC 100 0.0110 8.253 16.470 PCSDR127-5R6T-RC 5.6 30 100 0.0134 7.535 14.740 PCSDR127-6R8T-RC 6.8 30 100 0.0139 7.337 13.330 PCSDR127-8R2M-RC 8.2 20 100 0.0188 6.307 12.170 PCSDR127-100M-RC 10 20 100 0.0206 6.026 11.200 PCSDR127-120M-RC 100 0.0241 5.574 10.370 9.660 12 20 PCSDR127-150M-RC 15 20 100 0.0296 5.028 PCSDR127-180M-RC 18 0.0437 4.142 8.480 22 20 20 100 PCSDR127-220M-RC 100 0.0469 3.997 7.570 PCSDR127-270M-RC 27 20 100 0.0580 3.596 6.830 PCSDR127-330M-RC 33 20 100 0.0720 3.226 6.220 PCSDR127-390M-RC 39 20 100 0.0764 3.131 5.710 PCSDR127-470M-RC 47 20 100 0.0863 2.947 5.280 PCSDR127-560M-RC 56 20 100 0.0945 2.815 4.910 PCSDR127-680M-RC 68 20 100 0.1260 2.439 4.440 PCSDR127-820M-RC 82 20 100 0.1716 2.090 3.940 PCSDR127-101M-RC 100 20 100 0.1956 1.957 3.640 PCSDR127-121M-RC 120 20 100 0.2334 1.832 3.290 PCSDR127-151_-RC 150 K/M 100 0.2964 1.590 2.950 PCSDR127-181M-RC 180 20 100 0.3288 1.510 2.720 PCSDR127-221M-RC 220 20 100 0.4512 1.289 2.430 PCSDR127-271M-RC 270 20 100 0.5080 1.214 2.200 PCSDR127-331M-RC 330 20 100 0.6888 1.990 PCSDR127-391M-RC 390 20 100 0.8890 1.043 0.918 PCSDR127-471M-RC 470 20 100 1.0332 0.852 1.680 PCSDR127-561M-RC 560 20 100 1.1320 0.814 1.530 PCSDR127-681M-RC 680 20 100 1.2960 0.760 1.390 PCSDR127-821M-RC PCSDR127-102M-RC PCSDR127-122M-RC PCSDR127-332K-RC 820 1000 1200 3300 20 20 20 10 100 100 100 100 1.7640 1.9920 2.6100 5.0000 0.652 0.613 0.536 0.35 1.270 1.140 1.050 0.35 1.830 Features • Magnetically Shielded • High saturation current • • • • • Expanded operating temp range Low DC Resistance High Energy Storage Low Energy Loss Suitable for pick and place Electrical Inductance Range: .47µh to 3300µh Tolerance: .47µh~6.8µh 30%, 8.2µh~1200µh 20%, 3300µh 10% Available in tighter tolerances Test Frequency: 1KHz, 0.25V Operating Temp: -55ºC ~ +125ºC Irms: Current at which the ∆ T=40ºC Isat: Current at which the inductance drops 35% from initial value Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC Immersion time: 10 sec. +/- 1 sec. Test Equipment (L): HP 4284A LCR meter or equivalent (RDC): HP 4338B Millohm meter or equivalent (IDC): 3260B WK & DC Bias 3265B WK Physical Packaging: 500 pieces per 13 inch reel. Marking: EIA Inductance Code. *Insert desired tolerance designator: K=±10%, M=±20% All specifications subject to change without notice. 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 15 11/25/15 www.alliedcomponents.com