WMGPSU15 SERIES 15 Watts AC/DC Wall Mount Power Supplies Single Output Rev A Type U: American Plug Type E: European Plug Type S: 3-Pin Australian Plug Type SA: 2-Pin Australian Plug Type BS: UK Plug Size: 2.81 x 1.34 x 1.97in Size: 2.81 x 1.34 x 1.97in Size: 2.94 x 1.64 x 1.69in Size: 2.94 x 1.64 x 1.69in Size: 2.83 x 1.97 x 1.69in OPTIONS FEATURES • Plug Type • Output Cable • Output Voltage • • • • • Universal Input Voltage of 100~240VAC Meets Efficiency Level VI Single Output Optional Output Connectors Available Low Leakage Current • Compact Package • Over Voltage, Over Current, and Short Circuit Protection • UL60950-1, CSA C22.2, EN60950-1, and IEC60950-1 Safety Approvals • Several Different Plug Types Available DESCRIPTION The WMGPSU15 series of AC DC of wall mount power supplies offers up to 15 watts of output power in a compact package. Single outputs are available for this series with an input range of 100 to 240VAC, 50 to 60Hz. Five different plug types are available for this series: American plug type, European plug type, 3-pin and 2-pin Australian plug types, and UK plug type. This series is protected against over voltage, over current, and short circuit conditions and is Efficiency Level VI compliant. This series offers high efficiency and reliability and optional output connectors are available. Please call factory for ordering details. MODEL SELECTION TABLE Model Number(1) WMGPSU15x-1 WMGPSU15x-1-1 WMGPSU15x-2 WMGPSU15x-3 WMGSPU15x-4 WMGSPU15x-5 WMGPSU15x-6 WMGPSU15x-7 WMGPSU15x-8 12/10/2015 Input Voltage Range Output Voltage Output Current 100~240VAC 5~6VDC 6~8VDC 8~11VDC 11~13VDC 13~16VDC 16~21VDC 21~27VDC 27~33VDC 33~48VDC 2.40~2.00A 2.00~1.50A 1.80~1.36A 1.36~1.15A 1.15~0.94A 0.94~0.72A 0.72~0.55A 0.55~0.45A 0.45~0.31 Ripple & No Load Output Noise Power Consumption Power 50mV 80mV 80mV 80mV 100mV 120mV 150mV 240mV 240mV <0.075W <0.075W <0.075W <0.075W <0.075W <0.075W <0.075W <0.075W <0.075W 12W 12W 15W 15W 15W 15W 15W 15W 15W Avg. Efficiency(2) DoE (VI) 79.94% 82.96% 84.13% 84.13% 84.13% 84.13% 84.13% 84.13% 84.13% CoC (5) 80.3% 83.26% 84.50% 84.50% 84.50% 84.50% 84.50% 84.50% 84.50% Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Measured at Efficiency Output Of Level 5 7.5 9 12 15 18 24 28 48 Level VI Level VI Level VI Level VI Level VI Level VI Level VI Level VI Level VI Page 1 of 4 Rev A WMGPSU15 SERIES 15 Watts AC/DC Wall Mount Power Supplies Single Output SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Range Input Frequency Input Current Min 100 50 @115VAC at 25ºC cold start @230VAC at 25ºC cold start Inrush Current OUTPUT SPECIFICATIONS Output Voltage Line Regulation Load Regulation Set-Up Time Hold-Up Time Rise Time Temperature Coefficient PROTECTION Short Circuit Protection Over Current Protection Over Voltage Protection ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Relative Humidity Derating MTBF GENERAL SPECIFICATIONS Efficiency Insulation Resistance Withstanding Voltage Leakage Current PHYSICAL SPECIFICATIONS Weight Unit 240 60 0.5 VAC Hz A A See Table ±1 ±5 ±3 ±2 See Table See Table See Table Maximum for any input voltage change between input voltage range 5~11V Variations from minimum to 11~21V maximum output current. 21~48V Maximum excursion of 4% or better on all models. Recovering to 1% of final value within 500uS after a 25% step load change. @Full Load @Full Load @Full Load All Outputs % % 3000 10 50 mS mS mS %/ºC ±0.04 Automatic Recovery Hiccup Mode, Automatic Recovery Rated Output Current Protected by Zener diode Rated Output Current Non-Condensing Derated from 100% at +40ºC linearly to 70% at 50ºC @Full Load at 25ºC ambient 110 % 110 140 % 0 -40 5 40 85 95 ºC ºC % 100,000 hours See Table From Input to Output From Input to Output @240VAC/50Hz 50 MΩ VDC mA 4242 0.25 2.47~3.53oz (70~100g) 2.81 x 1.34 x 1.97in (71.5 x 34 x 50mm) 2.94 x 1.64 x 1.69in (74.6 x 41.6 x 43mm) 2.83 x 1.97 x 1.69in (72 x 50 x 42.8mm) U Type, E Type Dimensions (L x W x H) Max 40 60 Output Power Output Current Ripple & Noise (20MHz bandwidth) Transient Response Recovery Time(3) Typ S Type, SA Type BS Type SAFETY & EMC CHARACTERISTICS Safety Approvals EMC UL60950-1; CSA C22.2 EN60950-1 IEC60950-1 (A) CE: Emission: EN55022; EN61000-3-2,3/ Immunity:IEC61000-4-2,3,4,5,6,11 (B) FCC 47 CFR Part 15 Subpart B NOTES (1) (2) (3) (4) “x” in model name indicates the plug type. “U”= U type=American Plug, “E”= E Type=European plug, “S”= S Type= 3-Pin Australian plug, “SA”= SA Type= 2-Pin Australian type, and “BS”= UK type= UK Plug. Average efficiency: Averages the efficiency at 25, 50, 75, and 100% if max. rated output current. Recovering to 1% of final value within 500uS after a 25% step load change. Standard Output Cable: 5~13V: UL1185, 18AWG, 4FT 13~48V: UL1185, 20AWG, 6FT 12/10/2015 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 Rev A WMGPSU15 SERIES 15 Watts AC/DC Wall Mount Power Supplies Single Output DERATING CURVES Ambient Temperature Derating Curve Typical Static Characteristics MECHANICAL DRAWINGS 12/10/2015 U Type E Type S Type SA Type Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Rev A WMGPSU15 SERIES 15 Watts AC/DC Wall Mount Power Supplies Single Output BS Type COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 12/10/2015 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4