WMEA1019 SERIES 15~20 Watts AC/DC Wall Mount Power Supplies Single Output Rev A EU UK SAA USA China Size: 2.36in x 1.54in x 1.04in (60mm x 39mm x 26.5mm) OPTIONS FEATURES • AC Plug Type -USA -EU -UK -SAA • • • • • Wide Input Range of 100VAC to 240VDC Output Voltage Ranging from 5V to 48V RoHS Compliant Maximum Output Power of 20 Watts MTBF >30,000 Hours • Short Circuit, Over Voltage, Over Current, and Over Temperature Protection • Meets Efficiency Level V, VI • 5 AC Plug Types Available: USA, EU, UK, SAA, and China • Meets IEC60950 Safety Approval DESCRIPTION The WMEA1019 series of wall mount power supplies offers up to 20 watts of output power in a compact 2.36” x 1.54” x 1.04” package. This series consists of single output models with output voltages ranging from 5~48V and wide input voltage range of 100VAC to 240VDC. This series offers short circuit, over voltage, over current, and over temperature protection and is RoHS and Efficiency Level V, VI compliant. 5 different AC plug types are available: USA plug, EU plug, UK plug, SAA plug, and China plug. This series meets IEC60950 safety approvals. Please call factory for order details. MODEL SELECTION TABLE Model Number(1) Output Current Min Load Max Load 0A 3A 0A 2A 0A 1.42A 0A 1A 0A 0.71A 0A 0.55A Ripple & Noise(2) Output Power Efficiency Level 100mV 150mV 200mV 250mV 280mV 360mV 15W 18W 20W 20W 20W 20W Level V, VI Input Voltage Range Output Voltage WMEA1019Ax WMEA1019Bx WMEA1019Cx WMEA1019Dx WMEA1019Ex WMEA1019Fx 100VAC-240VDC 5-8V 9-13V 14-19V 20-27V 28-35V 36-48V 5/16/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 3 WMEA1019 SERIES 15~20 Watts AC/DC Wall Mount Power Supplies Single Output Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min INPUT SPECIFICATIONS Input Voltage Range Typ Max Unit 100VAC-240VDC ≤0.8 ≤60 Input Current Inrush Current @230VAC, Cold Start, Maximum Load OUTPUT SPECIFICATIONS Output Voltage Line Regulation(3) Load Regulation Output Power Output Current Minimum Load No Load Power Ripple & Noise (20MHz bandwidth)(2) Turn On Time PROTECTION Short Circuit Protection Over Current Protection Over Voltage Protection Over Temperature Protection ENVIRONMENTAL SPECIFICATIONS Operating Case Temperature Storage Temperature Storage Humidity MTBF PHYSICAL SPECIFICATIONS Weight -1 -5 0 See Table +1 +5 See Table See Table % % A W ≤0.1 See Table ≤3 S Automatic Recovery Automatic Recovery Automatic Recovery Latch Mode 0 -20 5 30,000 40 85 95 ºC ºC % hours 4.23oz (120g) 2.36in x 1.5in x 1.04in (60mm x 39mm x 26.5mm) Dimensions (L x W x H) SAFETY Safety Approvals A A IEC60950 NOTES (1) (2) (3) (4) “x” in model name represents plug type. “x” can be “U” for US Plug, “E” for EU plug, “K” for UK plug, “A” for SAA plug, or “C” for China plug. Ripple and noise is measured using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.1µF ceramic capacitor & parallel with 47µF aluminum capacitor at full load and nominal line. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. Certificates listed are for reference only. Please contact factory for details. MECHANICAL DRAWINGS 5/16/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 Rev A WMEA1019 SERIES 15~20 Watts AC/DC Wall Mount Power Supplies Single Output COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 5/16/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3