WMEA1024 SERIES Up to 36 Watts AC/DC Wall Mount Power Supply Single Output Rev A E Type U Type A Type K Type Size: 2.98in x 1.69in x 1.19in (75.8mm x 42.8mm x 30.2 mm) OPTIONS FEATURES • Output Voltage • Case Type • RoHS Compliant • Energy Level V and VI Compliant • Multiple Case Types Available: US, EU, UK, SAA • Output Voltage up to 48V • Over Voltage and Short Circuit Protection • UL/cUL UL60950, TUV/SUD EN/IEC 60950, CB, CE, FCC, and CCC Safety Approvals DESCRIPTION The WMEA1024 series of AC DC wall mount power supplies provides up to 36 watts of continuous output power in a 2.98” x 1.69” 1.28” package. This series consists of single output models with output voltages ranging from 5V to 48V and a wide input voltage range of 100~240VAC. This series is RoHS compliant and meets CEC Level V, VI requirements. This series also has UL/cUL 60950, TUV/SUD EN/IEC 60950, CB, CCC, FCC, and CE safety approvals. All models are protected against short circuit and over voltage conditions. Multiple case types are available for this series: US, EU, UK and SAA. Please call factory for ordering details. MODEL SELECTION TABLE Output Current Min Load Max Load 0A 2.0A 0A 3.0A 0A 4.0A 0A 1.5A 0A 2.0A 0A 3.0A 0A 1.66A 0A 2.5A 0A 1.33A 0A 1.66A 0A 0.55A 0A 0.83A 0A 3.0A 0A 2.0A 0A 1.5A Input Voltage Range Output Voltage WMEA1024AY WMEA1024BY WMEA1024CY WMEA1024DY WMEA1024EY WMEA1024FY WMEA1024GY WMEA1024HY WMEA1024JY WMEA1024KY WMEA1024MY WMEA1024NY WMEA1024PY WMEA1024QY WMEA1024RY 100-240VAC 5~8V 5~8V 5~8V 9~11V 9~11V 9~11V 12~17V 12~17V 18~24V 18~24V 36~48V 36~48V 12V 12V 24V 11/16/2015 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] (1) Model Number Ripple & Noise(2) Output Power Efficiency 100mV 100mV 100mV 250mV 250mV 250mV 250mV 250mV 350mV 350mV 480mV 480mV 250mV 250mV 350mV 16W 20W 24W 18W 24W 27W 20W 30W 24W 30W 20W 30W 36W 24W 36W Level V, VI Page 1 of 3 WMEA1024 SERIES Up to 36 Watts AC/DC Wall Mount Power Supply Single Output Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Range Input Frequency Input Current Inrush Current At Cold Start OUTPUT SPECIFICATIONS Output Voltage Line Regulation(3) Load Regulation Output Power Output Current Ripple & Noise (20MHz bandwidth)(1) Hold-Up Time Turn-On Time PROTECTION Short Circuit Protection Over Voltage Protection ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Operating Humidity Min 100 50 -1 -5 Typ ≤1 ≤60 Max Unit 240 60 VAC Hz A A See Table +1 +5 See Table See Table See Table ≥8.3 ≤3 % % mS S Auto Recovery Auto Recovery Storage Humidity GENERAL SPECIFICATIONS Efficiency PHYSICAL SPECIFICATIONS Weight 0 -20 10 40 85 90 ºC ºC % 5 95 % Meets CEC Level V, VI 7.05oz (200g) 2.98 x 1.69 x 1.19 in (75.8 x 42.8 x 30.2mm) U: USA, E: EU, K: UK, A: SAA Dimensions (L x W x H) AC Plug SAFETY & EMC CHARACTERISTICS UL/cUL UL60950 TUV/SUD EN/IEC 60950 CB CE FCC CCC Safety Approvals NOTES (1) (2) (3) The “Y” in model name represents AC plug option. This can either be: “U” for USA plug type, “E” for EU plug type, “K” for UK plug type, “A” for SAA plug type. Please call factory for ordering details. Ripple & Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.1uF ceramic capacitor & parallel with 47uF aluminum capacitor at full load and nominal line. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 11/16/2015 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 Rev A WMEA1024 SERIES Up to 36 Watts AC/DC Wall Mount Power Supply Single Output MECHANICAL DRAWINGS Mechanical Specifications COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 11/16/2015 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3