WMSAW30 SERIES 30 Watts AC/DC Wall Mount Power Supplies Single Outputs Rev A U Type: US Plug B Type: UK Plug G Type: EU Plug A Type: Aus Type Size: 2.80in x 1.70in x 1.14in (71.2mm x 43.2mm x 29mm) OPTIONS FEATURES • Plug Type • Output Voltage • • • • • Wide Input Voltage Range 90~264VAC High Efficiency RoHS Compliant Over Current and Short Circuit Protection Level VI Compliant • Drop In Tested • Burn-In Tested • Optional Plug Types Available: US Plug, UK Plug, EU Plug, and AUS Plug • Multiple Output Voltages Available DESCRIPTION The WMSAW30 series of AC DC wall mount power supplies provides up to 24 watts of output power in a compact 2.80” x 1.70” x 1.14” package. This series consists of single output models with a wide input voltage range of 90~264VAC and multiple output voltages available. Four different plugs are available for this series: US plug, UK plug, EU plug, AUS plug. All models are RoHS and Energy Efficiency Level VI compliant. Models are also protected against over current and short circuit conditions and have been drop-in and burn-in tested. Please call factory for ordering details. MODEL SELECTION TABLE (1) Model Number WMSAW30-090-2000x WMSAW30-090-3000x WMSAW30-120-1500x WMSAW30-120-2000x WMSAW30-120-2500x WMSAW30-180-1000x WMSAW30-240-1000x 1/12/2016 Input Voltage Range Output Voltage 90~264VAC 9V 9V 12V 12V 12V 18V 24V Output Current Min Load Max Load 0A 2000mA 0A 3000mA 0A 1500mA 0A 2000mA 0A 2500mA 0A 1000mA 0A 1000mA Ripple & Noise(2) Output Power Range Efficiency 90mV 90mV 120mV 120mV 120mV 150mV 150mV 15~30W Level VI Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 6 WMSAW30 SERIES 30 Watts AC/DC Wall Mount Power Supplies Single Outputs Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Range Input Frequency Input Current Inrush Current No Load Standby Power OUTPUT SPECIFICATIONS Output Voltage Line Regulation Load Regulation Output Power Output Current Ripple & Noise (20MHz BW) Transient Response Recovery Time Dynamic Response Overshoot Turn-On Delay Time Hold-Up Time Rise Time Fall Time Output Overshoot/Undershoot PROTECTION Min Typ Max Unit 90 47 100~240 60/50 264 63 1.2 40 0.1 VAC Hz A A W @100-240VAC input & Full Load @Nominal Input, Cold Start 100-240V See Table +1 +5 See Table See Table 240 -1 -5 All outputs for load step from 25% to 50% to 25%, 50% to 75% to 50% R/S: 0.25A/uS % % mVp-p 200 uS 5 @100VAC to 240VAC Input & Full Load @Full Load &115VAC/60Hz input turn off at worst case @Full Load &230VAC/50Hz input turn off at worst case @Rated Load @Full Load When the power is on or off % 3 S 10 20 mS 20 20 10 The input power will decrease when the output rail shorts, the power supply will not damage and will self-recover when the fault condition is removed. The output will hiccup when the over currents are applied to the output rail Over Current Protection and will self-recovery when the fault condition is removed. 5V Models 7.5V Models 9V (2.5A) Models Over Current Point Limited 100-240VAC 9V (3A) Models 12V Models ENVIRONMENTAL SPECIFICATIONS Operating Case Temperature Operating Relative Humidity Storage Temperature Storage Relative Humidity Non-Condensing @Sea level shall be below 2,000 meter Sweep at a constant acceleration of 1.0G (breadth: 3.5mm) for 1 hour for Vibration each of the perpendicular axes X, Y, Z. MTBF @25ºC ambient temperature max. working load, according to MIL-HDBK-217 GENERAL SPECIFICATIONS Efficiency Height: 1m; the product should be felled off on the hardwood with the thickness of 20mm, and the hardwood should be put on a cement base or on Drop In the ground without flexibility. Apply two times on all surfaces. Apply two times on all corners. The power supply will be burned-in for 4 hours under normal input and 80% Burn-In rated load at 40ºC±5ºC Primary to Secondary: Dielectric Strength (Hi-Pot) Primary to Secondary: Leakage Current @264VAC/50Hz Insulation Resistance @Primary to Secondary add 500VDC test voltage PHYSICAL SPECIFICATIONS Weight mS mS % Short Circuit Protection Dimensions (L x W x H) US Type <7 <5.5 <5 <6.5 <4 A 10 10 -20 5 40 90 80 95 10 300 50,000 ºC %RH ºC %RH Hz Hours See Table 3000VAC/ 10mA Max./ 60 second 3300VAC/ 5mA Max./ 3S 0.25 mA 50 MΩ Approx. 5.29oz (150g) 2.80in x 1.70in x 1.14in (71.2mm x 43.2mm x 29mm) SAFETY Safety Approvals 1/12/2016 UL, CUL, FCC CE & GS SAA & C-Tick CB & BSI1363 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 6 Rev A WMSAW30 SERIES 30 Watts AC/DC Wall Mount Power Supplies Single Outputs NOTES (1) (2) “x” in model name refers to plug type option. “x” can either be “U” for U type =US plug, “B” for B type =UK plug, “G” for G type =EU plug, or “A” for A type= Aus plug. Ripple & Noise is measured by 20MHz bandwidth oscilloscope and the output paralleled a 0.1uF ceramic capacitor and a 10uF electrolysis capacitor. (Tested under rated input and rated output conditions) MECHANICAL DRAWINGS 1/12/2016 U Type- US Plug B Type- UK Plug G Type- EU Plug A Type- Aus Plug Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 6 Rev A WMSAW30 SERIES 30 Watts AC/DC Wall Mount Power Supplies Single Outputs Cord Drawing 1/12/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 6 Rev A WMSAW30 SERIES 30 Watts AC/DC Wall Mount Power Supplies Single Outputs Label Drawing Package Drawing 1/12/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 5 of 6 Rev A WMSAW30 SERIES 30 Watts AC/DC Wall Mount Power Supplies Single Outputs COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 1/12/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 6 of 6