DTEA1068 SERIES 40~72 Watts AC/DC Desktop Power Supplies Rev E IEC-320-C14 IEC-320-C8 IEC-320-C6 IEC-320-C18 Size: 4.45 x 1.93 x 1.38 inches Size: 4.45 x 1.93 x 1.38 inches Size: 4.45 x 1.93 x 1.38 inches Size: 4.45 x 1.93 x 1.38 inches FEATURES • RoHS & WEEE Compliant • Single Outputs Ranging from 5VDC to 56VDC • 100~240VAC Input Voltage Range • Efficiency Meets CEC Level V, VI • IEC-320-C14, IEC-320-C8, IEC-320-C6, & IEC-320-C18 • Protection: OVP / OCP / OTP / SCP • LED Indication • Optional Output Connectors AC Inlets Available • PSE Approved • UL/cUL, TUV, CB, FCC, CCC, CE Safety Approvals Available DESCRIPTION The DTEA1068 series of AC/DC desktop power supplies provides up to 72 Watts of continuous output power in a 4.45” x 1.93” x 1.38” package. This series consists of single output models ranging from 5VDC to 56VDC with a wide input voltage range of 100~240VAC. This series is RoHS and WEEE compliant and meets CEC Level V, VI requirements. This series also has UL/cUL, TUV, CB, FCC, CCC, PSE and CE safety approvals. All models are protected against short circuit, over voltage, over current, and over temperature conditions. Four AC inlet connector types are available for this series: IEC-320-C14, IEC-320-C8, IEC-320-C6, and IEC-320-C18. Optional output connectors are also available please call factory for ordering details. MODEL SELECTION TABLE Model Number DTEA1068xA DTEA1068xB DTEA1068xC DTEA1068xD DTEA1068xE DTEA1068xF DTEA1068xG DTEA1068xH DTEA1068xJ DTEA1068xK DTEA1068xW DTEA1068xM DTEA1068xN DTEA1068xP DTEA1068xQ DTEA1068xR DTEA1068xY DTEA1068xS DTEA1068xU DTEA1068xV DTEA1068xL DTEA1068xT (1) Input Voltage Range 100 ~ 240 VAC Output Voltage (2) 5 ~ 9 VDC 12 ~ 16 VDC 18 ~ 24 VDC 32 ~ 42 VDC 44 ~ 56 VDC 5 ~ 9 VDC 12 ~ 16 VDC 18 ~ 24 VDC 32 ~ 42 VDC 44 ~ 56 VDC 5 ~ 9 VDC 5 ~ 9 VDC 12 ~ 16 VDC 18 ~ 24 VDC 32 ~ 42 VDC 44 ~ 56 VDC 12 ~ 16 VDC 5 ~ 9 VDC 12 ~ 16 VDC 18 ~ 24 VDC 32 ~ 42 VDC 44 ~ 56 VDC Output Current Min Max 0A 5.0A 0A 3.33A 0A 2.10A 0A 1.25A 0A 0.90A 0A 6.0A 0A 4.16A 0A 2.63A 0A 1.56A 0A 1.13A 0A 8.0A 0A 7.0A 0A 5.0A 0A 3.15A 0A 1.87A 0A 1.36A 0A 5.42A 0A 9.0A 0A 6.0A 0A 3.78A 0A 2.25A 0A 1.63A Load Regulation ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% Line Regulation ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% Ripple & Noise (3) Output Power 100mVp-p 250mVp-p 350mVp-p 500mVp-p 720mVp-p 100mVp-p 250mVp-p 350mVp-p 500mVp-p 720mVp-p 100mVp-p 100mVp-p 250mVp-p 350mVp-p 500mVp-p 720mVp-p 250mVp-p 100mVp-p 250mVp-p 350mVp-p 500mVp-p 720mVp-p 25W 40W 40W 40W 40W 30W 50W 50W 50W 50W 40W 35W 60W 60W 60W 60W 65W 45W 72W 72W 72W 72W NOTES 1. The “x” in the model number represents the type of AC inlet connector: “x” can be “1” for IEC-320-C14 type, “2” for IEC-320-C8 type, “3” for IEC320-C6, or “6” for IEC-320-C18 type. 2. The output voltage is specified as a range (Ex: 44~56 VDC); the customer must specify what they want the voltage set at. 3. Ripple and Noise is measured at nominal line and full load with 20MHz bandwidth and a 0.1µF ceramic capacitor and 47µF aluminum capacitors in parallel across the output. 4. Optional output connectors are available. Please call factory for ordering details. 09/18/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 3 DTEA1068 SERIES 40~72 Watts AC/DC Desktop Power Supplies Rev E TECHNICAL SPECIFICATIONS: DTEA1068 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION INPUT SPECIFICATIONS Input Voltage TEST CONDITIONS Input Frequency Input Current Inrush Current OUTPUT SPECIFICATIONS Output Voltage Line Regulation 09/18/2013 Unit 100 240 VAC 50 60 Hz 2 100 A A -1 +1 % -3 +3 See Table See Table % 0 A Measured at nominal line and full load with 0.1µF ceramic and 47µF aluminum capacitors in parallel Dimensions (L x W x H) Output Connectors SAFETY & COMPLIANCE Safety Approvals Compliance Max See Table Defined by changing ±10% of input voltage from nominal line at rated load Hold-up Time Turn-on Time PROTECTION Over Voltage Protection Short Circuit Protection Over Current Protection Over Temperature Protection GENERAL SPECIFICATIONS Efficiency ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Storage Humidity Cooling @115VAC (MIL-HDBK-217F) MTBF @230VAC (MIL-HDBK-217F) PHYSICAL SPECIFICATIONS Weight AC Inlet Connector Typ Cold start Load Regulation Output Power Output Current Minimum Load Ripple & Noise (20MHz BW) Min Suffix “1” Suffix “2” Suffix “3” Suffix “6” Call factory for ordering details See Table 8.3 ms s 3 Latch off Automatic recovery Automatic recovery Optional Meet CEC Level V, VI 0 -20 5 +40 +85 90 Free air convection °C °C % 148,503.94 159,357.51 hours 10.58oz (300g) 4.45 x 1.93 x 1.38 inches (113 x 49 x 35 mm) IEC-320-C14 IEC-320-C8 IEC-320-C6 IEC-320-C18 Several options available UL/cUL, TUV, CB, FCC, CCC, CE, PSE RoHS, WEEE, CEC Level V, VI Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 Rev E DTEA1068 SERIES 40~72 Watts AC/DC Desktop Power Supplies MECHANICAL DRAWING COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 09/18/2013 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3