IEC-320-C14 DTEM1120 SERIES 100~130 Watts, AC/DC Medical Desktop Power Supplies Rev B Wall Industries, Inc. IEC-320-C8 FEATURES IEC-320-C6 Single Outputs Energy Star/CEC Level V Compliant RoHS & WEEE Compliant 100~240VAC Input Voltage Range Short Circuit and Over Voltage Protection IEC-320-C14, IEC-320-C8, & IEC-320-C6 AC Inlets UL/cUL 60601, EN 60601-1, & IEC 60601-1 Approvals Size: 7.05 x 2.53 x 1.57 inches Size: 7.05 x 2.53 x 1.57 inches Size: 7.05 x 2.53 x 1.57 inches Optional Output Connectors Available DESCRIPTION The DTEM1120 series of medical AC/DC desktop power supplies provides up to 130 Watts of continuous output power in a 7.05” x 2.53” x 1.57” package. All models have a single output and a wide input voltage range of 100~240VAC. This series is RoHS, WEEE, and Energy Star/CEC Level V compliant and has UL/cUL 60601-1, EN 60601-1, and IEC 60601-1 medical approvals. All models are protected against over voltage, over current, and short circuit conditions. This series also has three AC inlet connector types available: IEC-320-C14, IEC-320-C8, and IEC-320-C6. Optional output connectors are also available please call factory for ordering details. MODEL SELECTION TABLE Model Number (1) Input Voltage Range Output Voltage (2) Output Current Min Max Ripple & Noise (3) Output Power 10A 240mVp-p 120W DTEM11201A 12 ~ 17 VDC 0A DTEM11201B 18 ~ 24 VDC 0A 7A 240mVp-p 130W DTEM11201C 12 ~ 17 VDC 0A 9.17A 240mVp-p 110W 18 ~ 24 VDC 0A 6.5A 240mVp-p 120W DTEM11201E 12 ~ 17 VDC 0A 8.34A 240mVp-p 100W DTEM11201F 18 ~ 24 VDC 0A 6.11A 240mVp-p 110W DTEM11202A 12 ~ 17 VDC 0A 10A 240mVp-p 120W DTEM11202B 18 ~ 24 VDC 0A 7A 240mVp-p 130W DTEM11202C 12 ~ 17 VDC 0A 9.17A 240mVp-p 110W 18 ~ 24 VDC 0A 6.5A 240mVp-p 120W DTEM11202E 12 ~ 17 VDC 0A 8.34A 240mVp-p 100W DTEM11202F 18 ~ 24 VDC 0A 6.11A 240mVp-p 110W DTEM11203A 12 ~ 17 VDC 0A 10A 240mVp-p 120W DTEM11203B 18 ~ 24 VDC 0A 7A 240mVp-p 130W DTEM11203C 12 ~ 17 VDC 0A 9.17A 240mVp-p 110W 18 ~ 24 VDC 0A 6.5A 240mVp-p 120W DTEM11203E 12 ~ 17 VDC 0A 8.34A 240mVp-p 100W DTEM11203F 18 ~ 24 VDC 0A 6.11A 240mVp-p 110W DTEM11201D DTEM11202D DTEM11203D 100 ~ 240 VAC 100 ~ 240 VAC 100 ~ 240 VAC AC Inlet (1) IEC-320-C14 IEC-320-C8 IEC-320-C6 NOTES 1. The number in red represents the type of AC inlet connector: “1” is for IEC-320-C14 type, “2” is for IEC-320-C8 type, and “3” is for IEC-320-C6 type. 2. The output voltage is specified as a range (Ex: 18~24VDC); the customer must specify what they want the voltage set at. 3. Ripple and Noise is measured at nominal line and full load with 20MHz bandwidth and a 0.1μF ceramic capacitor and 47μF aluminum capacitors in parallel across the output. 4. Optional output connectors are available. Please call factory for ordering details. 07/02/2013 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 3 Wall Industries, Inc. Rev B DTEM1120 SERIES 100~130 Watts, AC/DC Medical Desktop Power Supplies SPECIFICATIONS: DTEM1120 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Input Voltage 100 240 VAC Input Frequency 50 60 Hz Input Current 2 A Inrush Current 120 A OUTPUT SPECIFICATIONS Output Voltage See Table Defined by changing ±10% of input voltage from nominal line and rated load Line Regulation Load Regulation -1 +1 % -5 +5 % Output Power See Table Output Current See Table Minimum Load 0 Measured at nominal line and full load with 20MHz limited bandwidth and 0.1μF ceramic and 47μF aluminum capacitors in parallel across the output Ripple & Noise Hold-up Time A 240 mVp-p 8.3 ms Turn-on Time 3 s PROTECTION Over Voltage Protection Automatic recovery Short Circuit Protection Automatic recovery GENERAL SPECIFICATIONS Efficiency 85 % ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Storage Humidity 0 +40 °C -20 +85 °C 5 95 % Cooling Free air convection MTBF 30,000 hours PHYSICAL SPECIFICATIONS Weight 1.55 lbs (705g) Dimensions (L x W x H) AC Inlet Connector Output Connectors 7.05 x 2.53 x 1.57 inches (179.0 x 64.2 x 40.0 mm) See Note 1 IEC-320-C14, IEC-320-C8, and IEC-320-C6 Several options available SAFETY & COMPLIANCE Safety Approvals Compliance 07/02/2013 UL/cUL 60601-1, EN60601-1, IEC60601-1, CB, CE RoHS, WEEE, CEC/Energy Star Level V Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 Wall Industries, Inc. Rev B DTEM1120 SERIES 100~130 Watts, AC/DC Medical Desktop Power Supplies MECHANICAL DRAWING Unit: inches (mm) 2.53±0.04 (64.2±1) 1.57±0.04 (40±1) 7.05±0.04 (179±1) 1.57±0.04 (40±1) IEC-320-C14 IEC-320-C8 1.57±0.04 (40±1) 1.57±0.04 (40±1) IEC-320-C6 COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO90012008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 07/02/2013 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3