DTEM1068 SERIES 40~72 Watts Medical AC/DC Desktop Power Supplies Rev E IEC-320-C14 IEC-320-C8 IEC-320-C6 IEC-320-C18 Size: 4.45 x 1.93 x 1.38 inches Size: 4.45 x 1.93 x 1.38 inches Size: 4.45 x 1.93 x 1.38 inches Size: 4.45 x 1.93 x 1.38 inches FEATURES • RoHS & WEEE Compliant • Single Outputs Ranging from 5VDC to 56VDC • 100~240VAC Input Voltage Range • Efficiency Meets CEC Level V, VI • IEC-320-C14, IEC-320-C8, IEC-320-C6, & IEC-320-C18 AC • Protection: OVP / OCP / OTP / SCP • LED Indication • Optional Output Connectors Available Inlets Available • UL/cUL 60601-1: 3rd Edition Medical Approvals • TUV, CB, FCC, CE Approvals DESCRIPTION The DTEM1068 series of medical AC/DC desktop power supplies provides up to 72 Watts of continuous output power in a 4.45” x 1.93” x 1.38” package. All models have a single output and a wide input voltage range of 100~240VAC. This series is RoHS and WEEE compliant and meets CEC Level V, VI requirements. This series also has UL/cUL 60601-1 3rd edition medical approvals. All models are protected against short circuit, over voltage, over current, and over temperature conditions. Four AC inlet connector types are available for this series: IEC-320-C14, IEC-320-C8, IEC-320-C6, and IEC-320-C18. Optional output connectors are also available. Please call factory for ordering details. MODEL SELECTION TABLE Model Number DTEM1068xA DTEM1068xB DTEM1068xC DTEM1068xD DTEM1068xE DTEM1068xF DTEM1068xG DTEM1068xH DTEM1068xJ DTEM1068xK DTEM1068xW DTEM1068xM DTEM1068xN DTEM1068xP DTEM1068xQ DTEM1068xR DTEM1068xY DTEM1068xS DTEM1068xU DTEM1068xV DTEM1068xL DTEM1068xT (1) Input Voltage Range 100 ~ 240 VAC Output Voltage 5 ~ 9 VDC 12 ~ 16 VDC 18 ~ 24 VDC 32 ~ 42 VDC 44 ~ 56 VDC 5 ~ 9 VDC 12 ~ 16 VDC 18 ~ 24 VDC 32 ~ 42 VDC 44 ~ 56 VDC 5 ~ 9 VDC 5 ~ 9 VDC 12 ~ 16 VDC 18 ~ 24 VDC 32 ~ 42 VDC 44 ~ 56 VDC 12 ~16 VDC 5 ~ 9 VDC 12 ~ 16 VDC 18 ~ 24 VDC 32 ~ 42 VDC 44 ~ 56 VDC (2) Output Current Min Max 0A 5.0A 0A 3.33A 0A 2.10A 0A 1.25A 0A 0.90A 0A 6.0A 0A 4.16A 0A 2.63A 0A 1.56A 0A 1.13A 0A 8.0A 0A 7.0A 0A 5.0A 0A 3.15A 0A 1.87A 0A 1.36A 0A 5.24A 0A 9.0A 0A 6.0A 0A 3.78A 0A 2.25A 0A 1.63A Load Regulation ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% Line Ripple & Noise (4) Regulation(3) ±1% 100mVp-p ±1% 250mVp-p ±1% 350mVp-p ±1% 500mVp-p ±1% 720mVp-p ±1% 100mVp-p ±1% 250mVp-p ±1% 350mVp-p ±1% 500mVp-p ±1% 720mVp-p ±1% 100mVp-p ±1% 100mVp-p ±1% 250mVp-p ±1% 350mVp-p ±1% 500mVp-p ±1% 720mVp-p ±1% 250mVp-p ±1% 100mVp-p ±1% 250mVp-p ±1% 350mVp-p ±1% 500mVp-p ±1% 720mVp-p Output Power 25W 40W 40W 40W 40W 30W 50W 50W 50W 50W 40W 35W 60W 60W 60W 60W 65W 45W 72W 72W 72W 72W NOTES 1. The “x” in the model number represents the type of AC inlet connector: “x” can be “1” for IEC-320-C14 type, “2” for IEC-320-C8 type, “3” for IEC320-C6, or “6” for IEC-320-C18 type. 2. The output voltage is specified as a range (Ex: 44~56 VDC); the customer must specify what they want the voltage set at. 3. Line Regulation is defined by changing ±10% of input voltage from nominal line at rated load. 4. Ripple and Noise is measured at nominal line and full load with 20MHz bandwidth and a 0.1µF ceramic capacitor and 47µF aluminum capacitors in parallel across the output. 5. Optional output connectors are available. Please call factory for ordering details. 05/12/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 4 Rev E DTEM1068 SERIES 40~72 Watts Medical AC/DC Desktop Power Supplies TECHNICAL SPECIFICATIONS: DTEM1068 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Input Voltage 100 240 VAC Input Frequency 50 60 Hz Input Current Inrush Current At cold start 2 A 100 A OUTPUT SPECIFICATIONS Output Voltage See Table Defined by changing ±10% of input voltage from nominal line at rated load Line Regulation Load Regulation Output Power -1 +1 % -3 +3 See Table % Output Current See Table Minimum Load 0 Ripple & Noise (20MHz BW) Measured at nominal line and full load with 0.1µF ceramic and 47µF aluminum capacitors in parallel Hold-up Time A See Table 8.3 Turn-on Time PROTECTION Over Voltage Protection Short Circuit Protection Over Current Protection 3 Optional Meet CEC Level V, VI Storage Temperature Storage Humidity Cooling @115VAC (MIL-HDBK-217F) @230VAC (MIL-HDBK-217F) PHYSICAL SPECIFICATIONS Weight +40 °C -20 +85 °C 5 90 % Free air convection 148,503.94 159,357.51 hours Suffix “1” Suffix “2” IEC-320-C8 Suffix “3” IEC-320-C6 Suffix “6” Output Connectors 0 10.58oz (300g) 4.45 x 1.93 x 1.38 inches (113 x 49 x 35 mm) IEC-320-C14 Dimensions (L x W x H) AC Inlet Connector s Latch off Automatic recovery Automatic recovery Over Temperature Protection GENERAL SPECIFICATIONS Efficiency ENVIRONMENTAL SPECIFICATIONS Operating Temperature MTBF ms IEC-320-C18 Call factory for ordering details Several options available SAFETY & COMPLIANCE Safety Approvals Compliance 05/12/2016 UL/cUL 60601-1: 3rd edition, TUV EN/IEC 60601-1: 3rd edition, CB, FCC, CE RoHS, WEEE, CEC Level V, VI Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 DTEM1068 SERIES 40~72 Watts Medical AC/DC Desktop Power Supplies Rev E DERATING CURVE Thermal Derating Curve Test Condition: Input Voltage: 90VAC/60Hz & 264VAC/50Hz Load: Load Drop 2.5% when ambient rise 1ºC Test Instrument: AC Source: AllPower-110N Electronic Load: PRODIGIT 3310C Temperature Recorder: Agilent 34970A Chamber: Static Chamber (1) Temperature (ºC) Output Power (W) 05/12/2016 0 100% 10 100% 20 100% 30 100% 40 100% 45 87.5% 50 75.0% 55 62.5% Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] 60 50.0% Page 3 of 4 Rev E DTEM1068 SERIES 40~72 Watts Medical AC/DC Desktop Power Supplies MECHANICAL DRAWING COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 05/12/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4