HOT FEED Information on New Products from Cole Hersee Company NEW Plastic Solenoids Motor Reversing Heavy Service Glass-filled nylon construction. Lightweight, durable and resistant to corrosion. Perfect for a wide variety of applications. Resistant to high or low temperatures (-40º C to 60º C) Many configurations: multiple mountings and terminals; sealed/unsealed; 12V – 48V. F Bracket F Bracket F Bracket, Sealed L Bracket Intermittent Duty Solenoids, 200A SPST, normally Open contacts. Applications: For starting small engines, including lawn tractors, golf carts and sweepers. Part No. Voltage Contact Bracket Large studs Coil terminals Coil type 200A make and break, 5 secs On, 5 secs Off. 300A inrush. Max On time 20 secs. 24512-03 12V 2 blades Insulated Insulated Copper L 5/16"-24 24512-13 12V Copper F 5/16"-24 2 blades 24612-03 12V Copper L 5/16"-24 2 10-32 studs Insulated Sealed solenoids: 200A make and break, 5 secs On, 5 secs Off. 500A inrush, Max On time 20 secs. 24612-13 Allow at least 40 secs cooling after max On time. 12V Copper F 5/16"-24 2 10-32 studs Insulated 24612-G13 12V Copper F 5/16"-24 1 10-32 stud 24712-S6 12V Copper L 1/4"-20 2 8-32 studs Insulated, sealed 24712-S7 12V Copper F 1/4"-20 2 8-32 stud Insulated, sealed 24712-GS7 12V Copper F 1/4"-20 1 8-32 stud Grounded, sealed Grounded Sealed solenoids are protected against ingress of moisture or contaminants such as oil or gasoline. Maximum operating voltage 14V DC. Cycle life: 10,000 min. Continuous Duty Solenoids, 100A SPST, normally Open contacts. 100A make and break, 400A inrush. Applications: For starting small engines, including lawn tractors, golf carts and sweepers. Part No. Voltage Contact Bracket Large studs Coil terminals Coil type 24512-10 12V Silver F 5/16"-24 2 blades Insulated 24612 12V Silver L 5/16"-24 2 10-32 studs Insulated 24612-10 12V Silver F 5/16"-24 2 10-32 studs Insulated 24612-G10 12V Silver F 5/16"-24 1 10-32 stud Grounded 24624-10 24V Silver F 5/16"-24 2 10-32 studs Insulated 24636 36V Silver L 5/16"-24 2 10-32 studs Insulated 12V: maximum operating voltage 14V DC. Cycle life: 50,000 min. 24V: maximum operating voltage 27V DC. Cycle life: 50,000 min. 36V: maximum operating voltage 36V DC. Cycle life: 50,000 min. Cole Hersee Co. 20 Old Colony Avenue, Boston, MA USA 02127-2467 • (617) 268-2100 • Fax (617) 268-9490 See our interactive product catalog at www.colehersee.com Heavy Service Continuous Duty Solenoids, 225A Applications: For use with heavy vehicles, materials handling, hydraulic systems, large DC machinery, and electric vehicles. SPST Normally Open Contacts. 12-48V DC 225A make and break. Inrush 600A. Also available by special order as Intermittent Duty. 12-24V DC intermittent. 300A make and break. Inrush 600A. 20 secs On, 5 min Off. Maximum On time 10 min. Part No. Voltage Contact Bracket Large studs Coil terminals Coil type 24812 12V Copper L 5/16"-24 2 10-32 studs Insulated 24836 36V Silver L 5/16"-24 2 10-32 studs Insulated 24848 48V Silver L 5/16"-24 2 10-32 studs Insulated 12V: maximum operating voltage 14V DC. Cycle life: 25,000 min. 24V: maximum operating voltage 27V DC. Cycle life: 50,000 min. 36V: maximum operating voltage 36V DC. Cycle life: 50,000 min. 48V: maximum operating voltage 48V DC. Cycle life: 50,000 min. Motor Reversing Solenoid With dynamic braking capability. Applications: for reversing motors such as hoists, winches, windlasses and snowplow blades. DPDT Intermittent Duty. 12V DC 75A make and break, max On time 5 mins. 12V DC 125A make and break, max On time 30 secs. 12V DC 150A make and break, max On time 0.5 secs. Allow 5 mins Off after max On time. Part No. Voltage Contact Bracket Large studs Coil terminals Coil type 24450 Common ground 12V Copper F 5/16"-24 2 blades Maximum operating voltage 14.5V DC. Cycle life: 10,000 cycles at 5 secs On, 25 secs Off. Solenoids for other voltages may be available by special order. Two solenoids in one for cost and space savings and simpler wiring. Two integral solenoids provide dynamic braking for permanent magnet motors, when neither coil is energized. Use one of the many different Cole Hersee SPDT momentary switches: rocker (such as 58027-04) toggle (such as 55021) rotary (such as 72154-01/02) or key locked rotary switch (such as 75705-01). Drawings Other models and combinations are available: please consult the factory. 0.876 [22.25MM] 2.990 [75.95MM] 5/16-24 UNF-2A THREAD COPPER STUD Intermittent & Continuous Duty Solenoids 2.250 [57.15MM] Shown: Insulated solenoid with 5/16" studs and two coil blade terminals. 0.032 [0.81MM] 1.303 [33.10MM] .250 IN (6.35MM) BLADE TERM. 2.569 [65.26MM] Not Shown: Grounded solenoid with 5/16" studs and one coil blade terminal. 0.655 [16.64MM] 1.104 [28.04MM] 1.019 [25.87MM] 0.281 [7.14MM] 3 0.750 [19.05MM] 2.210 [56.13MM] 0.406 [10.31MM] TYP. 1.625 [41.27MM] Not shown: Insulated solenoid with 5/16" studs and 10-32 coil studs, and insulated solenoid with 1/4"-20 and 8-32 coil studs. All solenoids in this style have similar overall dimensions. 2 0.383 [9.73MM] 1.850 [46.99MM] 1.625 [41.27MM] 10-32 HEX NUT & LOCK WASHER 2.600 [66.03MM] 2 Heavy Duty Solenoids 24812, 24836, 24848 3 HEX NUT & LOCK WASHER 2.741 [69.62MM] 1.313 [33.35MM] 3.227 [81.97MM] 0.281 [7.14MM] BRACKET, STEEL 5/16-24 HEX NUT & COPPER STUD. 1.891 [48.04MM] 1.950 [49.53MM] 4 1.376 [34.95MM] 3.290 [83.57MM] 4.041 [102.65MM] 0.406 [10.31MM] 0.281 [7.14MM] 1.224 1.224 BATT + MTR FWD. MTR REV. 2.926 [74.32MM] 3.285 [83.43MM] BATT + MTR FWD. T1 5/16-24 UNF-2A COPPER STUD HEX NUT, STEEL. 4 PL. LOCK WASHER, 4 PL. 3.012 [76.50MM] MTR REV. 2.472 [62.78MM] Motor Reversing Solenoid 24450 .250 IN. (6.35 MM) QUICK CONNECT MALE T2 0.708 [17.97MM] 1.008 4.125 [104.78MM] 2.254 [57.25MM] 1.964 1.562 [39.69MM] 5.009 Cole Hersee Co. 20 Old Colony Avenue, Boston, MA USA 02127-2467 • (617) 268-2100 • Fax (617) 268-9490 See our interactive product catalog at www.colehersee.com All specifications and information is subject to change without notice. © Copyright Cole Hersee Co. D•596