Download Data Sheet

DTA-150AD-A5 Series
With Active PFC
150 Watt, Multiple Outputs
AC/DC Desktop Switching Adapter
Rev B
FEATURES
● High Reliability
● Multiple Outputs
● With Active PFC
● RoHS Compliant
● 40mm Cooling Fan
● Input: 90~264 VAC
● 100% Hi-Pot Tested
● 100% Burn-In Tested
● Total Power: 150 Watts
● AC Input: IEC 320-C14 Inlet
● Safety Approvals, EMC Compliance
● Over Voltage and Short Circuit Protected
● Dimensions: 188.5(L) x 104.5(W) x 60(H) mm
DESCRIPTION
The DTA-150AD-A5 series consists of multiple output, highly reliable desktop power supplies with an input voltage range of
90~264VAC. All supplies have an IEC-320-C14 AC inlet connector. These supplies are EMC and RoHS compliant and also
have over voltage and short circuit protection. This series has been 100% burn-in and hi-pot tested.
SPECIFICATIONS: DTA-150AD-A5 Series
All specifications apply @ ±25°C ambient unless otherwise noted
INPUT SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Input Voltage Range ............................. 90 – 264 VAC (full range)
Operating Temperature ............................................. 0°C to +50°C
Input Frequency ............................................................. 47 - 63Hz
Storage Temperature............................................... -10°C to+70°C
Input Current (rms).............. 2.5A @ 90VAC; 1A @ 264VAC max.
MTBF .............. >100,000 hrs at FL and 25°C ambient temperature
OUTPUT SPECIFICATIONS
PHYSICAL SPECIFICATIONS
Output Current ................................................................ see table
Weight .......................................................................approx. 12 oz
Output Voltage ................................................................ see table
Dimensions .............................. 7.42(L) x 4.11(W) x 2.36(H) inches
188.5(L) x 104.5(W) x 60(H) mm
Voltage Regulation............. +5VSB, V1, V2: ±5%; V3 & V4: ±10%
Maximum Power .................................................................. 150W
Ripple/Noise (20 MHz BW) ...................................................... 1%
Hold Up Time .................... >16ms typical at full load and 115VAC
PROTECTION
Short Circuit Protection ........................................... Auto-recovery
Over Voltage Protection ..............................................AC Recycle
GENERAL SPECIFICATIONS
Efficiency............................................. >80% @ full load, 115VAC
AC Inlet .......................................................................IEC 320-C14
SAFETY & EMI
Safety Standards ..............................................................UL60950
......................................................................CSA C22.2-No.60950
................................................................................. TUV EN60950
................................................................................. CB IEC 60950
EMI Standards ............................................................FCC Class B
............................................................................ CISPR22 Class B
........................................................................... EN 55022 Class B
.................................................................................. EN 61000-3-2
................................................................................................... CE
Power Factor......................................... >0.9 (20% to 100% Load)
Due to advances in technology, specifications subject to change without notice
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
DTA-150AD-A5 Series
With Active PFC
150 Watt, Multiple Outputs
AC/DC Desktop Switching Adapter
Rev B
MODEL SELECTION GUIDE
Model
DTA-150A2-2Y-A01E
DTA-150A2-2Y-B01E
DTA-150A2-2Y-C01E
DTA-150A2-3Y-A01E
DTA-150A2-4Y-A01E
DTA-150A2-5Y-A01E
(ATX Type)
Output Voltage
Output Current
+5 VDC
+19 VDC
+5 VDC
+12 VDC
+12 VDC
-12VDC
+5 VDC
+12 VDC
-12 VDC
+3.3 VDC
+5 VDC
+12 VDC
-12 VDC
+5VSB
15A
5A
15A
8A
12A
1.5A
15A
8A
1.5A
6A
7A
8A
1.5A
2A
Output Power
Output Regulation
Ripple & Noise
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
50mVp-p
190mVp-p
50mVp-p
120mVp-p
120mVp-p
120mVp-p
50mVp-p
120mVp-p
120mVp-p
50mVp-p
50mVp-p
120mVp-p
120mVp-p
50mVp-p
150W
150W
150W
150W
150W
NOTES
1. The DTA-150AD-A5 Series is designated as DTA-150A2-xY-zzzE where x = number of outputs and zzz is the output representative.
2. Any dual up to 5 output combinations are available. Please call factory for desired combination.
3. Ripple & Noise is measured at 20MHz bandwidth with a tantalum 10µF capacitor in parallel with a 0.1µF ceramic capacitor.
4. +5VSB / 2A is optional for above models.
5. The total output power is 150 watts maximum.
MECHANICAL DRAWING
Unit: inches (mm)
STANDARD OUTPUT CABLE
1. AWM 2464#18-20AWG/4C~8C+SHIELDING, UL 80°C 300V VW-1, 1050 mm. (2~3 Outputs)
2. AWM 2464#18C+SHIELDING, UL 80°C 300V VW-1, 1050 mm. (For OC-09)
3. Depends on customer’s requirements.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797