DTAM65 Series Up to 65 Watts Class I, Single Outputs AC/DC Medical Desktop Adapter Rev B FEATURES ● Class I ● LED option ● High Reliability ● Universal Input ● RoHS Compliant ● 100% Hi-Pot Tested ● AC Inlet: IEC 320-C14 ● 100% BURN-IN Tested ● Safety Approvals, EMC Compliance ● CEC/Energy Star Level V Compliant SPECIFICATIONS: DTAM65 Series All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range Rated Input Voltage Range Input Frequency Input Current Inrush Current OUTPUT SPECIFICATIONS Output Current Output Voltage Line Regulation Ripple & Noise (20MHz BW) Hold Up Time PROTECTION Short Circuit Protection Over Voltage Protection Over Power Protection GENERAL SPECIFICATIONS 90 - 264VAC (Full Range) 100 - 240VAC 47 - 63Hz 2A max. 30A at maximum at 115VAC, See Table See Table < 1% See Table >16ms typical at full load and 115VAC Auto recover Auto recover Auto recover Efficiency No Load Power Consumption ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature MTBF PHYSICAL SPECIFICATIONS Weight Dimensions AC Input SAFETY & EMI Safety Standards EMC Standards 60A at maximum at 230VAC 5V, 12V > 75% Avg. 115 or 230VAC 15V ~ 48V > 85% Avg. 115 or 230VAC (Meet CEC 2008) < 0.5W at 230VAC 0°C to +70°C ambient (derating at 2.5%/°C from 50°C to 70°C) -10°C to +85°C >100,000 hours at full load and 25°C ambient temperature Approximately 12oz. 132.0(L) x 69.00(W) x 40.00(H) mm IEC 320-C14 Inlet UL/c-UL UL60601-1, TUV EN60601-1, CB IEC60601-1 EN60601-1-2, FCC Part 18 Class B, EN55011 Class B, CE Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 DTAM65 Series Up to 65 Watts Class I, Single Outputs AC/DC Medical Desktop Adapter Rev B MODEL SELECTION TABLE Model Output Voltage Output Current Output Power Output Regulation Ripple & Noise *DTAM040A1Y05X DTAM060A1Y12X DTAM060A1Y15X DTAM065A1Y18X DTAM065A1Y24X DTAM065A1Y36X DTAM065A1Y48X 5 VDC 12 VDC 15 VDC 18 VDC 24 VDC 36 VDC 48 VDC 8A 5A 4A 3.6A 2.7A 1.8A 1.35A 40W 60W 60W 64.8W 64.8W 64.8W 64.8W 5% 5% 5% 3% 3% 3% 3% 100mVp-p 120mVp-p 150mVp-p 180mVp-p 240mVp-p 360mVp-p 480mVp-p NOTES 1. The suffix X can be blank for no LED or L for a green LED. Contact factory for ordering details. 2. DTAM040A1Y05X does not meet CEC/Energy Star Level V requirements. All other models meet CEC/Energy Star Level V requirements. 3. Ripple & Noise is measured at 20MHz bandwidth with a tantalum 10uF in parallel with a 0.1uF ceramic capacitor. MECHANICAL DRAWING Unit: inches (mm) TOP FRONT 2.72 (69.0) LABEL DC OUTPUT CABLE 1.57 (40.0) 5.20 (132.0) NOTES 1. AC Inlet: IEC-320-C14 Standard 2. Box Color: Black 3. Tolerance: ±0.5mm SIDE RUBBER FOOT X4 STANDARD OUTPUT CABLE 1. 12V~24V: AWM 1571#14AWG 1C+SHIELDING, UL 80°C 300V VW-1, 1000 mm, Connector 4P POWER DIN PLUG. 2. 36V~48V: AWM 1185#16AWG 1C+SHIELDING, UL 80°C 300V VW-1, 1000 mm, Connector 4P POWER DIN PLUG. Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797