WMGPSU40 SERIES Up to 40 Watts AC DC Wall Mount Power Supplies Single Output Rev A U Type: US Plug E Type: EU Plug SA Type: 2 Pin Aus Plug BS Type: UK Plug Size: 2.97in x 1.26in x 1.87in Size: 2.97in x 1.26in x 1.87in Size: 2.97in x 1.57in x 1.87in Size: 2.97in x 1.92in x 1.87in OPTIONS FEATURES • Plug Type • Output Connector • • • • • • Universal Input Voltage Range of 100-240VAC Output Voltages Ranging from 5~58V High Efficiency Energy Level VI Compliant Single Outputs Optional Plug Types Available: US, EU, 2 Pin Aus, and UK • Optional Output Connectors Available • Short Circuit, Over Voltage, and Over Current Protection • UL60950-1, CSA C22.2, EN60950-1, IEC60950-1, and J60950 Safety Approvals • Low Leakage Current • CE Marked DESCRIPTION The WMGPSU40 series of AC DC wall mount power supplies provides up to 40 watts of output power in a compact package. This series consists of single output models with output voltages ranging from 5~48V and with an input voltage of 100~240VAC. Four different output plugs are also available for this series: US plug, EU Plug, 2-Pin Australian Plug, and UK Plug. All models are protected against short circuit, over voltage, and over current conditions and have UL60950-1, CSA C22.2, EN60950-1, IEC60950-1, and J60950 safety approvals. All models are Energy Level VI compliant. Please call factory for order details. MODEL SELECTION TABLE Model Number(1) WMGPSU40x-1 WMGPSU40x-2 WMGPSU40x-3 WMGPSU40x-4 WMGPSU40x-5 WMGPSU40x-6 WMGPSU40x-7 WMGPSU40x-8 12/17/2015 Input Voltage Range Output Voltage Range Measured at Output Output Current Ripple & Noise 100~240VAC 100~240VAC 100~240VAC 100~240VAC 100~240VAC 100~240VAC 100~240VAC 100~24VAC 5~6VDC 8~11VDC 11~13VDC 13~16VDC 16~21VDC 21~27VDC 27~33VDC 33~58VDC 5VDC 9VDC 12VDC 15VDC 18VDC 24VDC 30VDC 48VDC 5~4.16A 5~3.64A 3.64~3.08A 3.08~2.50A 2.50~1.90A 1.90~1.49A 1.49~1.22A 1.22~0.70A 200mV 120mV 130mV 250mV 250mV 300mV 300mV 400mV No load Power Output Power Consumption <0.075W 25W 40.04W 40.04W 40.04W 40W 40.23W 40.26W 40.6W Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Efficiency(2) DoE (VI) CoC (5) 84.25% 87.60% 87.60% 87.60% 87.60% 87.60% 87.60% 87.60% 85% 88.60% 88.60% 88.60% 88.60% 88.60% 88.60% 88.60% Page 1 of 4 Rev A WMGPSU40 SERIES Up to 40 Watts AC DC Wall Mount Power Supplies Single Output SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Range Input Frequency Input Current Leakage Current Inrush Current OUTPUT SPECIFICATIONS Output Voltage Line Regulation Load Regulation Output Power Output Current Ripple & Noise Transient Response Set-Up Time Hold Up Time Rise Time Temperature Coefficient PROTECTION Short Circuit Protection Typ 100 50 @240VAC/50Hz @115VAC at 25ºC cold start @230VAC at 25ºC cold start Max Unit 240 60 1 0.25 VAC Hz A mA 65 95 Maximum excursion of 4% or better on all models. Recovering to 1% of final value within 500µS after 25% step load change @Full Load @Full Load @Full Load All outputs U Type and E Type SA Type BS Type A See Table ±1 ±5 See Table See Table See Table For any input voltage change between input voltage range Variations from minimum to maximum output current Hiccup Mode Hiccup Mode Over Current Protection Rated Output Voltage Protected by Zener diode Over Voltage Protection Rated Output Voltage ENVIRONMENTAL SPECIFICATIONS Operating Case Temperature See derating curve Storage Temperature Relative Humidity Non-Condensing Derating Derated from 100% at +40ºC linearly to 70% at 50ºC MTBF @Full Load, 25ºC ambient temperature GENERAL SPECIFICATIONS Efficiency Insulation Resistance From Input to Output Withstand Voltage From Input to Output PHYSICAL SPECIFICATIONS Weight Dimensions (L x W x H) Min 1000 10 50 ±0.04 % % mS mS mS %/ºC Automatic Recovery Automatic Recovery 110 % 110 140 % 0 -40 5 40 +85 95 ºC ºC % 100,000 hours See Table 50 4242 MΩ VDC 6.7~7.76oz (190~220g) 2.97in x 1.26in x 1.87in (75.5mm x 32mm x 47.5mm) 2.97in x 1.57in x 1.87in (75.5mm x 39.8mm x 47.5mm) 2.97in x 1.92in x 1.87in (75.5mm x 48.8mm x 47.5mm) SAFETY & EMC CHARACTERISTICS Safety Approvals EMC UL60950-1; CSA C22.2 EN60950-1 IEC60950-1 J60950 CE: Emission: EN55022;EN61000-3-2,3 Immunity:IEC61000-4-2,3,4,5,6,11 FCC 47 CFR Part 15 Subpart B NOTES (1) (2) (3) (4) “x” in model number references the plug types available. “X” can either be; “U”= U Type= US Plug, “E”=E Type= EU Plug, “SA”= SA Type= 2-Pin AUS Plug, or “BS”= BS Type= UK Plug. Please call factory for order details. Average efficiency at 25, 50, 75, 100% of max. rated output current. Standard Output Cables: 5~6V: UL1571, 14AWG, 1M 8~16V: UL1571, 16AWG, 1M 16~58V: UL2468. 20AWG, 5FT Optional output connectors available. 12/17/2015 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 Rev A WMGPSU40 SERIES Up to 40 Watts AC DC Wall Mount Power Supplies Single Output DERATING CURVES Derating Curve Typical Static Characteristics MECHANICAL DRAWINGS 12/17/2015 U Type- US Plug E Type- EU Plug SA Type- 2-Pin AUS Plug BS Type- UK Plug Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Rev A WMGPSU40 SERIES Up to 40 Watts AC DC Wall Mount Power Supplies Single Output COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 12/17/2015 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4