WMGPSU18 SERIES Up to 18 Watts AC DC Wall Mount Power Supplies Single Output Rev A U Type E Type SA Type BS Type Size: 2.81 x 1.26 x 1.48in Size: 2.81 x 1.26 x 1.48in Size: 2.81 x 1.57 x 1.48in Size: 2.81 x 1.92 x 1.48in OPTIONS FEATURES • Output Connectors • Output Voltage • Plug Type • Universal Input Voltage Range of 100~240VAC • Meets Efficiency Level VI • Single Output • Optional Output Connectors Available • Short Circuit, Over Voltage, and Over Current Protection • Low Leakage Current <0.1mA • Optional Plug Types Available: American, European, 2-Pin Australian, and UK Types • UL60950-1; CSA C22.2, EN60950-1; IEC60950-1, and J60950 Safety Approvals DESCRIPTION The WMGPSU18 series of AC DC wall mount power supplies offers up to 18 watts of continuous output power in a compact package. This series consists of single output models that have a universal input voltage range of 100~240VAC and output voltages ranging from 5VDC to 58VDC. Each model is protected against short circuit, over voltage, and over current conditions and all models are Efficiency Level VI compliant. Four different plug types are available for this series: American type, European type, 2-pin Australian type, and UK plug types. This series also has UL60950-1; CSA C22.2, EN60950-1; IEC60950-1, and J60950 safety approvals. Please call factory for order details. MODEL SELECTION TABLE Model Number(1) Input Voltage Range Output Voltage(2) Output Current Ripple & Noise No Load Power Consumption Output Power WMGPSU18x-1 WMGPSU18x-2 WMGPSU18x-3 WMGPSU18x-4 WMGPSU18x-5 WMGPSU18x-6 WMGPSU18x-7 WMGPSU18x-8 100~240VAC 100~240VAC 100~240VAC 100~240VAC 100~240VAC 100~240VAC 100~240VAC 100~240VAC 5~6VDC 8~11VDC 11~13VDC 13~16VDC 16~21VDC 21~27VDC 27~33VDC 33~58VDC 3.00~2.50A 2.25~1.64A 1.64~1.38A 1.38~1.13A 1.13~0.86 0.86~0.67A 0.67~0.55A 0.55~0.32A 80mV 100mV 120mV 150mV 150mV 150mV 240mV 240mV <0.075W <0.075W <0.075W <0.075W <0.075W <0.075W <0.075W <0.075W 15W 18.04W 18.04W 18.08W 18.08W 18.09W 18.15W 18.56W 6/2/2016 Efficiency(3) Measured Efficiency At Output Level DoE(VI) CoC (5) 5 Level VI 81.39% 81.84% 9 Level VI 85% 85.45% 12 Level VI 85% 85.45% 15 Level VI 85% 85.45% 18 Level VI 85% 85.45% 24 Level VI 85% 85.45% 28 Level VI 85% 85.45% 48 Level VI 85% 85.45% Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 4 Rev A WMGPSU18 SERIES Up to 18 Watts AC DC Wall Mount Power Supplies Single Output SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Range Input Frequency Input Current OUTPUT SPECIFICATIONS Output Voltage Line Regulation Load Regulation Output Power Output Current Ripple & Noise Transient Response Recovery Time Set-Up Time Hold-Up Time Rise Time Temperature Coefficient PROTECTION Short Circuit Protection 100 47 0.45 Efficiency Insulation Resistance Withstand Voltage Leakage Current PHYSICAL SPECIFICATIONS Weight Unit 240 63 0.2 VAC Hz A A See Table ±1 ±5 ±3 See Table See Table See Table For any input voltage change between input voltage range 5~27VDC Variations from minimum to maximum output current 27~58VDC Maximum excursion of 4% or better on all models. Recovering to 1% of final value within 500uS after a 25% step load change. @Full Load @Full Load @Full Load All outputs % % 1000 10 50 ±0.04 mS mS mS %/ºC Auto-Recovery 110 % 110 140 % 0 -40 5 40 85 95 ºC ºC %RH 100,000 hours See Table From Input to Output From Input to Output @240VAC/50Hz 50 MΩ VDC mA 4242 0.1 4.94~5.64oz (140~160g) 2.97 x 1.26 x 1.48in (75.5 x 32 x 37.5mm) 2.97 x 1.57 x 1.48in (75.5 x 39.8 x 37.5mm) 2.97 x 1.92 x 1.48in (75.5 x 48.8 x 37.5mm) U Type, E Type SA Type BS Type EMI Max 50 90 Hiccup mode Hiccup mode, Automatic Recovery Over Current Protection Rated Output Voltage Protected by Zener diode Over Voltage Protection Rated Output Voltage ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Relative Humidity Non-Condensing Derating Derated from 100% at 40ºC linearly to 70% at 50ºC MTBF @Full Load at 25ºC ambient SAFETY Safety Approvals Typ @115VAC at 25ºC Cold Start @230VAC at 25ºC Cold Start Inrush Current Dimensions (L x W x H) Min UL60950-1; CSA C22.2, EN60950-1, IEC60950-1, J60950 CE: Emission: EN55022; EN61000-3-2,3/Immunity: IEC61000-4-2,3,4,5,6,11 FCC 47 CFR Part 15 Subpart B NOTES (1) The “x” in each model number represents the plug type available: “U”= U Type= American plug, “E”= E type= European plug, “SA”= 2-Pin Australian plug, “BS”= BS Type= UK plug. (2) Output voltage can be set anywhere in this range. (3) Average efficiency: Averages the efficiency at 25, 50, 75, 100% of max. rated output current. (4) Standard Output Cables: 5~11V: UL1571, 16AWG, 1M 11~13V: UL2468, 18AWG, 1M 13~58V: UL2468, 22AWG 5FT Due to advances in technology, specifications subject to change without notice. 6/2/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 Rev A WMGPSU18 SERIES Up to 18 Watts AC DC Wall Mount Power Supplies Single Output DERATING CURVES Derating Typical Static Characteristics U Type E Type SA Type BS Type MECHANICAL DRAWINGS 6/2/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Rev A WMGPSU18 SERIES Up to 18 Watts AC DC Wall Mount Power Supplies Single Output COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 6/2/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4