Download Data Sheet

DTCGSW48 SERIES
22.5~43.2 Watts, AC/DC Desktop Power Supplies
Rev A
Wall Industries, Inc.
FEATURES
“A” Type
Size: 4.57 x 1.87 x 1.30 inches
“B” Type
Size: 4.57 x 1.87 x 1.30 inches
“C” Type
Size: 4.57 x 1.87 x 1.30 inches
 RoHS Compliant
 CEC / Energy Star Level V Compliant
 22.5~43.2W Output Power
 100-240VAC Input Voltage Range
 Single Outputs
 Output Voltage, Over Current, & Short Circuit Protection
 Free Air Convection Cooling
 IEC-320-C14, IEC-320-C8, & IEC-320-C6 AC Inlets Available
 MTBF: 50,000 Hours
 Several Output Connector Options Available
 Very Low Standby Power
 UL/cUL, FCC, CE, GS, PSE, SAA, C-Tick, CB, EUP, & CCC Approvals
DESCRIPTION
The DTCGSW48 series of AC/DC desktop power supplies provides up to 43.2 Watts of output power in
a 4.57” x 1.87” x 1.30” package. This series consists of single output models ranging from 5V to 36VDC
with a 100~240VAC input voltage range. These supplies are RoHS compliant and are protected
against over voltage, over current, and short circuit conditions. The DTCGSW48 series is CEC and
Energy Star Level V compliant and has UL/cUL, FCC, CE, GS, PSE, SAA, C-Tick, CB, EUP, and CCC safety
approvals. IEC-320-C14, IEC-320-C8, and IEC-320-C6 AC inlet types are available for this series.
MODEL SELECTION TABLE
Model Number
Input Voltage Range
Output Voltage
Output Current
Ripple & Noise (1)
Output Power
DTCGSW2205A
5 VDC
4.5A
50mVp-p
22.5W
DTCGSW3075A
7.5 VDC
4A
50mVp-p
30W
DTCGSW3109A
9 VDC
3.5A
100mVp-p
31.5W
DTCGSW3612A
12 VDC
3A
100mVp-p
36W
100 ~ 240 VAC
DTCGSW3514A
14 VDC
2.5A
100mVp-p
35W
DTCGSW3615A
15 VDC
2.4A
100mVp-p
36W
DTCGSW2819A
19 VDC
1.5A
100mVp-p
28.5W
DTCGSW3624A
24 VDC
1.5A
100mVp-p
36W
DTCGSW4336A
36 VDC
1.2A
150mVp-p
43.2W
DTCGSW2205B
5 VDC
4.5A
50mVp-p
22.5W
DTCGSW3075B
7.5 VDC
4A
50mVp-p
30W
DTCGSW3109B
9 VDC
3.5A
100mVp-p
31.5W
DTCGSW3612B
12 VDC
3A
100mVp-p
36W
100 ~ 240 VAC
DTCGSW3514B
14 VDC
2.5A
100mVp-p
35W
DTCGSW3615B
15 VDC
2.4A
100mVp-p
36W
DTCGSW2819B
19 VDC
1.5A
100mVp-p
28.5W
DTCGSW3624B
24 VDC
1.5A
100mVp-p
36W
DTCGSW4336B
36 VDC
1.2A
150mVp-p
43.2W
DTCGSW2205C
5 VDC
4.5A
50mVp-p
22.5W
DTCGSW3075C
7.5 VDC
4A
50mVp-p
30W
DTCGSW3109C
9 VDC
3.5A
100mVp-p
31.5W
DTCGSW3612C
12 VDC
3A
100mVp-p
36W
100 ~ 240 VAC
DTCGSW3514C
14 VDC
2.5A
100mVp-p
35W
DTCGSW3615C
15 VDC
2.4A
100mVp-p
36W
DTCGSW2819C
19 VDC
1.5A
100mVp-p
28.5W
DTCGSW3624C
24 VDC
1.5A
100mVp-p
36W
DTCGSW4336C
36 VDC
1.2A
150mVp-p
43.2W
NOTES
1. Ripple and noise is measured at 20MHz limited bandwidth with 0.1μF ceramic and 10μF electrolytic capacitors across the output
2. Several output connector options available. Please call factory for ordering details.
03/22/2013
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
AC Inlet
IEC-320-C14
IEC-320-C8
IEC-320-C6
Page 1 of 4
Rev A
Wall Industries, Inc.
DTCGSW48 SERIES
22.5~43.2 Watts, AC/DC Desktop Power Supplies
SPECIFICATIONS: DTCGSW48 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT SPECIFICATIONS
Input Voltage
Input Frequency
Input Current
Inrush Current
Stand-by Power
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Tolerance
Line Regulation
Load Regulation
Output Power
Output Current
Minimum Load
Ripple & Noise
Hold-Up Time
Turn-on Time
PROTECTION
Over Voltage Protection
Over Current Protection
Short Circuit Protection
GENERAL SPECIFICATIONS
Efficiency
Switching Frequency
Dielectric Withstand Voltage
Insulation (input to output)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Operating Humidity
Cooling
MTBF
PHYSICAL SPECIFICATIONS
Dimensions (L x W x H)
Weight
Rated input voltage range
Output Connector
SAFETY & COMPLIANCE
Safety Approvals
Compliance
Min
Typ
Max
Unit
100
47
115/230
50/60
240
63
1.5
30
75
0.3
VAC
Hz
A
90VAC/60Hz and full load
100VAC and full load
240VAC and full load
230VAC/50Hz and no load
-5
-1
-5
See Table
+5
+1
+5
See Table
See Table
0
A
W
%
%
%
mA
See Table
100VAC/60Hz and full load
100VAC/60Hz and full load
10
3
ms
s
Output voltage clamped by Zener diode
Output shut-down; Automatic recovery
Output shut-down; Automatic recovery
Meets CEC-V / ERP
65
10mA / 60 sec
500VDC
3000
10
0
-20
5
@ 25°C (MIL-HDBK-217F)
“A” Suffix
“B” Suffix
“C” Suffix
AC Inlet
03/22/2013
TEST CONDITIONS
40
60
95
Free air convection
50,000 hours
KHz
VAC
MΩ
°C
°C
% RH
4.57 x 1.87 x 1.30 inches (116.0 x 47.5 x 33.0 mm)
Approximately 7.41oz (210g)
IEC-320-C14
IEC-320-C8
IEC-320-C6
Optional output connectors available
UL/cUL, FCC, CE, GS, PSE, SAA, C-Tick, CB, EUP, and CCC
RoHS and CEC/Energy Star Level V compliant
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 2 of 4
Wall Industries, Inc.
DTCGSW48 SERIES
22.5~43.2 Watts, AC/DC Desktop Power Supplies
Rev A
MECHANICAL DRAWING
Unit: inches (mm)
“B” Suffix
“C” Suffix
1.30 (33.0)
1.30 (33.0)
1.30 (33.0)
IEC-320-C14
IEC-320-C8
IEC-320-C6
1.87 (47.5)
4.57 (116.0)
“A” Suffix
4.57 (116.0)
1.87 (47.5)
NOTES
1. Tolerance: ±0.01 (±0.25)
2. Weight: 7.41oz (210g)
3. Optional output connector available
4. All dimensions are for reference only
MODEL NUMBER SETUP
DTCGSW
36
24
A
Series Name
Output Power
Ouptut Voltage
AC Inlet Connector Type
22:
22.5 Watts
05:
5 VDC
A:
IEC-320-C14
28:
28.5 Watts
75:
7.5 VDC
B:
IEC-320-C8
30:
30 Watts
09:
9 VDC
C:
IEC-320-C6
31:
31.5 Watts
12:
12 VDC
35:
35 Watts
14:
14 VDC
36:
36 Watts
15:
15 VDC
43:
43.2 Watts
19:
19 VDC
24:
24 VDC
36:
36 VDC
Note: Several output connector options are available. Please contact factory for ordering details.
03/22/2013
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 3 of 4
Wall Industries, Inc.
Rev A
DTCGSW48 SERIES
22.5~43.2 Watts, AC/DC Desktop Power Supplies
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO90012008 certification is just one example of our commitment to producing a high quality, well-documented product for our
customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working
closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue
to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to
discuss your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
03/22/2013
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
5 Watson Brook Rd.
Exeter, NH 03833
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 4 of 4