DATASHEET Rev. C DTEM1070 SERIES 100~240VAC Input Voltage Range 60~72 Watts, Single Outputs IEC-320-C14, C8, and C6 AC Inlet Types AC/DC Medical Desktop Power Supplies IEC-320-C14 IEC-320-C8 IEC-320-C6 FEATURES Single Outputs 100~240VAC Input Voltage Range CEC / Energy Star Level V Compliant IEC-320-C14, IEC-320-C8, and IEC-320-C6 AC Inlet RoHS Compliant Connectors Available Short Circuit and Over Voltage Protection MTBF: > 30,000 Hours UL/cUL 60601-1 (3rd edition), TUV/RH EN/IEC 60601-1, CB, CE, and FCC Safety Approvals Dimensions: 5.20” x 2.13” x 1.22” Optional Output Connectors Available DESCRIPTION The DTEM1070 series of AC/DC medical desktop power supplies provides up to 72 Watts of continuous output power. All models have a single output and a wide input voltage range of 100~240VAC. All models are protected against over voltage and short circuit conditions. This series is RoHS and CEC/Energy Star Level V compliant and has UL/cUL 60601-1 (3rd edition), TUV/RH EN/IEC 60601-1, CB, CE, and FCC safety approvals. This series also has three AC inlet connector types available: IEC-320-C14, IEC-320-C8, and IEC-320-C6. Optional output connectors are also available. Please call factory for ordering details. 02/07/2013 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 4 DTEM1070 Series C14 and C6 Inlet Types 60~72 Watts, Single Outputs AC/DC Medical Desktop Power Supplies Rev. C SPECIFICATIONS: DTEM1070 Series All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION INPUT SPECIFICATIONS Input Voltage Range Input Frequency Input Current Inrush Current OUTPUT SPECIFICATIONS Output Current Output Voltage (See Note 2) Line Regulation TEST CONDITIONS Min 100 50 Line regulation is defined by changing ±10% of input voltage from nominal line and rated load. Unit 240 60 2 90 VAC Hz A A -1 +1 % -5 +5 See Table % Measured at nominal line and full load with 20MHz limited bandwidth and 0.1µF ceramic and 47µF aluminum capacitors in parallel on the output. Hold-up Time Turn-on Time PROTECTION Over Voltage Protection Short Circuit Protection GENERAL SPECIFICATIONS Efficiency (typical) ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Storage Humidity MTBF PHYSICAL SPECIFICATIONS Dimensions (L x W x H) AC Inlet Connector (See Note 1) Weight SAFETY & COMPLIANCE Safety Standards Compliance 02/07/2013 Max See Table See Table Load Regulation Output Power Ripple & Noise Typ 250 mVp-p 8.3 3 ms s Latch off Automatic recovery 85 0 -20 5 40 85 95 > 30,000 hours % °C °C % 5.20 x 2.13 x 1.22 inches (132 x 54 x 31 mm) IEC-320-C14, IEC-320-C8, IEC-320-C6 11.3oz (320g) UL/cUL 60601-1 (3rd edition), TUV/RH EN/IEC 60601-1, FCC, CB, CE RoHS, WEEE, CEC/Energy Star Level V Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 4 DTEM1070 Series C14 and C6 Inlet Types 60~72 Watts, Single Outputs AC/DC Medical Desktop Power Supplies Rev. C MODEL SELECTION TABLE Input Voltage Range Output Current Ripple & Noise (3) Maximum Output Power 6A 250mVp-p 72W 0A 4A 250mVp-p 72W 0A 5A 250mVp-p 60W 18 ~ 24 VDC 0A 3.33A 250mVp-p 60W DTEM10702A 12 ~ 17 VDC 0A 6A 250mVp-p 72W DTEM10702B 18 ~ 24 VDC 0A 4A 250mVp-p 72W 12 ~ 17 VDC 0A 5A 250mVp-p 60W 18 ~ 24 VDC 0A 3.33A 250mVp-p 60W Model Number (1) Output Voltage (2) Min Max 12 ~ 17 VDC 0A 18 ~ 24 VDC 12 ~ 17 VDC DTEM10701D DTEM10701A DTEM10701B DTEM10701C DTEM10702C 100 ~ 240 VAC 100 ~ 240 VAC DTEM10702D DTEM10703A 12 ~ 17 VDC 0A 6A 250mVp-p 72W DTEM10703B 18 ~ 24 VDC 0A 4A 250mVp-p 72W 12 ~ 17 VDC 0A 5A 250mVp-p 60W 18 ~ 24 VDC 0A 3.33A 250mVp-p 60W DTEM10703C 100 ~ 240 VAC DTEM10703D AC Inlet Type IEC-320-C14 IEC-320-C8 IEC-320-C6 NOTES 1. The number in red represents the type of AC inlet: “1” is for IEC-320-C14 type, “2” is for IEC-320-C8 type, and “3” is for IEC-320-C6 type. 2. The output voltage is specified as a range (Ex: 18~24VDC); the customer must specify what they want the voltage set at. 3. Ripple and Noise is measured at nominal line and full load with 20MHz limited bandwidth and a 0.1µF ceramic and 47µF aluminum capacitors in parallel on the output. 4. Optional output connectors are available. Please call factory for ordering details. MECHANICAL DRAWING 5.20±0.04 (132±1) 2.13±0.04 (54±1) 1.22±0.04 (31±1) Unit: inches (mm) 1.22±0.04 (31±1) IEC-320-C14 IEC-320-C8 1.22±0.04 (31±1) 1.22±0.04 (31±1) IEC-320-C6 02/07/2013 All dimensions are for reference only Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 4 Rev. C DTEM1070 Series C14 and C6 Inlet Types 60~72 Watts, Single Outputs AC/DC Medical Desktop Power Supplies COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 02/07/2013 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 4