DATASHEET Rev. B DTIPU16 SERIES 90~264VAC Input Voltage Range Up to 15 Watts, Single Outputs Class I for A, C, & E Types; Class II for B & D Types -20°C to +70°C Operating Temperature Range AC/DC Desktop Power Supplies Type A Type B Type C Type D Type E FEATURES 100% Burn-in Tested RoHS Compliant UL 94V-1 Compliant Energy Star 2.0, Efficiency Level V Compliant Single Output Voltages Available from 3~ 48VDC Wide Input Voltage Range: 90~264VAC Short Circuit Protection Approved as Limited Power Source (LPS) Efficiency up to 79% Optional Output Connectors Available Class I for A, C, & E Types; Class II for B & D Types -20°C to +70°C Operating Temperature Range IEC-320-C14, IEC-320-C8, and IEC-320-C6 AC Inlets Available 2 Prong and 3 Prong A Stand and Mains AC Power Cords Available Meets FCC Part-15 Class B and CISPR-22 Class B Emission Limits UL/cUL (UL60950-1: 2nd Edition) and TUV/GS (EN 60950-1: 2nd Edition) Safety Approvals DESCRIPTION The DTIPU16 series of AC/DC desktop power supplies provides up to 15 Watts of continuous output power. This series consists of single output models with a 90~264VAC input voltage range. All units are UL 94V-1, RoHS, CEC and Energy Star compliant and meet FCC Part-15 class B and CISPR-22 class B emission limits. The DTIPU16 series also meets new CE requirements and has UL/cUL (UL 60950-1: 2nd edition) and TUV/GS (EN 60950-1: 2nd edition) safety approvals. The DTIPU16 series has three types of AC inlets available: IEC-320-C14 (Type A), IEC-320-C8 (Type B), and IEC-320-C6 (Type C). 2 prong (Type D) and 3 prong (Type A) A Stand and Mains AC Power Cords also available. All units have been 100% burn-in tested. 06/27/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 7 DTIPU16 Series Up to 15 Watts Class I & II, Single Outputs AC/DC Desktop Power Supplies Rev. B SPECIFICATIONS: DTIPU16 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max Unit INPUT SPECIFICATIONS Operating Voltage Range Operating Input Voltage Range Safety Approvals Input Voltage Range 90 100 47 Input Frequency Low Line Input Current High Line Low Line Inrush Current High Line No Load Power Consumption OUTPUT SPECIFICATIONS Output Voltage Load Regulation Line Regulation Output Power Output Current Range Ripple & Noise (peak to peak) Transient Response Time Hold-Up Time Start-Up Time Temperature Coefficient PROTECTION Over Voltage Protection Over Current Protection GENERAL SPECIFICATIONS Efficiency Dielectric Withstand Voltage Isolation Resistance Safety Ground Leakage Current ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Operating Humidity Storage Humidity MTBF PHYSICAL SPECIFICATIONS Weight Io = Full Load, Vin = 115VAC Io = Full Load, Vin = 230VAC Io = Full Load, 25°C, Cool Start, Vin = 115VAC Io = Full Load, 25°C, Cool Start, Vin = 230VAC No Load, Vin = 230VAC Vin = 230VAC Io = Full Load Vin = 90 to 264VAC SAFETY Safety Approvals EMI Requirements for CISPR-22 EMI Requirements for FCC PART-15 Compliance CEC & Energy Star Compliance 06/27/2012 8 0.3 -0.04 See Table 3 10 0.5 1 15 See Table 2 0.5 1 4 1 2 +0.04 Io = Full Load, Vin = 230VAC Primary to Secondary Primary to Ground Test Voltage = 500VDC Io = Full Load, Vin = 240VAC 4242 2121 50 A A W % % W % ms ms s %/°C VDC 0.5 Operating Temp. at 25°C; calculated per MIL-HDBK-217F -20 -40 0 0 40 0.75 70 85 95 95 100,000 hours MΩ mA °C °C % % Approx. 5.8oz (165g) 3.58 x 1.50 x 1.42 inches (91.0 x 38.0 x 36.0 mm) IEC-320-C14 IEC-320-C8 IEC-320-C6 2 Prong A Stand and Mains AC Power Cord 3 Prong A Stand and Mains AC Power Cord A Type B Type C Type D Type E Type DTIPU16-101 DTIPU16-102~111 models Hz See Table A, B, C, D & E types A and C types A, B, C, D & E types Derating linearly from 100% Load at 40°C to 50% load at 70°C Vin = 220VAC Vin = 120VAC VAC Nil Nil output is protected against short circuit conditions Dimensions (L x W x H) AC Inlets 12 26 0 Outputs under 3.3VDC Full Load, Vin = 90VAC Others Io = Full Load to Half Load, Vin = 100VAC Io = Full Load, Vin = 110VAC Io = Full Load, Vin = 100VAC 264 240 63 0.4 0.26 15 30 0.3 UL/cUL (UL60950-1: 2nd edition.), TUV/GS (EN60950-1: 2nd edition), CE B Class B Class RoHS and UL 94V-1 CEC Level IV CEC Level V Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 7 DTIPU16 Series Up to 15 Watts Class I & II, Single Outputs AC/DC Desktop Power Supplies Rev. B MODEL SELECTION TABLE Model Number *DTIPU16A-101 *DTIPU16A-102 *DTIPU16A-103 *DTIPU16A-104 *DTIPU16A-105 *DTIPU16A-106 *DTIPU16A-107 *DTIPU16A-108 *DTIPU16A-109 *DTIPU16A-110 *DTIPU16A-111 *DTIPU16B-101 *DTIPU16B-102 *DTIPU16B-103 *DTIPU16B-104 *DTIPU16B-105 *DTIPU16B-106 DTIPU16B-107 *DTIPU16B-108 DTIPU16B-109 DTIPU16B-110 DTIPU16B-111 *DTIPU16C-101 *DTIPU16C-102 *DTIPU16C-103 *DTIPU16C-104 *DTIPU16C-105 *DTIPU16C-106 *DTIPU16C-107 *DTIPU16C-108 *DTIPU16C-109 *DTIPU16C-110 *DTIPU16C-111 *DTIPU16D-101 *DTIPU16D-102 *DTIPU16D-103 *DTIPU16D-104 *DTIPU16D-105 DTIPU16D-106 DTIPU16D-107 DTIPU16D-108 DTIPU16D-109 DTIPU16D-110 DTIPU16D-111 *DTIPU16E-101 *DTIPU16E-102 *DTIPU16E-103 *DTIPU16E-104 *DTIPU16E-105 *DTIPU16E-106 *DTIPU16E-107 *DTIPU16E-108 *DTIPU16E-109 *DTIPU16E-110 *DTIPU16E-111 Input Voltage 90 ~ 264 VAC 90 ~ 264 VAC 90 ~ 264 VAC 90 ~ 264 VAC 90 ~ 264 VAC Output Voltage 3 ~ 5 VDC 5 ~ 5.99 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 48 VDC 3 ~ 5 VDC 5 ~ 5.99 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 48 VDC 3 ~ 5 VDC 5 ~ 5.99 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 48 VDC 3 ~ 5 VDC 5 ~ 5.99 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 48 VDC 3 ~ 5 VDC 5 ~ 5.99 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 48 VDC Output Current 2.50 A max. 2.50 ~ 2.00 A 2.00 ~ 1.50 A 1.87 ~ 1.36 A 1.36 ~ 1.15 A 1.15 ~ 0.94 A 0.94 ~ 0.72 A 0.72 ~ 0.55 A 0.55 ~ 0.45 A 0.45 ~ 0.37 A 0.37 ~ 0.31 A 2.50 A max. 2.50 ~ 2.00 A 2.00 ~ 1.50 A 1.87 ~ 1.36 A 1.36 ~ 1.15 A 1.15 ~ 0.94 A 0.94 ~ 0.72 A 0.72 ~ 0.55 A 0.55 ~ 0.45 A 0.45 ~ 0.37 A 0.37 ~ 0.31 A 2.50 A max. 2.50 ~ 2.00 A 2.00 ~ 1.50 A 1.87 ~ 1.36 A 1.36 ~ 1.15 A 1.15 ~ 0.94 A 0.94 ~ 0.72 A 0.72 ~ 0.55 A 0.55 ~ 0.45 A 0.45 ~ 0.37 A 0.37 ~ 0.31 A 2.50 A max. 2.50 ~ 2.00 A 2.00 ~ 1.50 A 1.87 ~ 1.36 A 1.36 ~ 1.15 A 1.15 ~ 0.94 A 0.94 ~ 0.72 A 0.72 ~ 0.55 A 0.55 ~ 0.45 A 0.45 ~ 0.37 A 0.37 ~ 0.31 A 2.50 A max. 2.50 ~ 2.00 A 2.00 ~ 1.50 A 1.87 ~ 1.36 A 1.36 ~ 1.15 A 1.15 ~ 0.94 A 0.94 ~ 0.72 A 0.72 ~ 0.55 A 0.55 ~ 0.45 A 0.45 ~ 0.37 A 0.37 ~ 0.31 A Total Regulation 7% 5% 5% 5% 5% 5% 5% 5% 5% 3% 3% 7% 5% 5% 5% 5% 5% 5% 5% 5% 3% 3% 7% 5% 5% 5% 5% 5% 5% 5% 5% 3% 3% 7% 5% 5% 5% 5% 5% 5% 5% 5% 3% 3% 7% 5% 5% 5% 5% 5% 5% 5% 5% 3% 3% Output Power 12W 12W 12W 15W 15W 15W 15W 15W 15W 15W 15W 12W 12W 12W 15W 15W 15W 15W 15W 15W 15W 15W 12W 12W 12W 15W 15W 15W 15W 15W 15W 15W 15W 12W 12W 12W 15W 15W 15W 15W 15W 15W 15W 15W 12W 12W 12W 15W 15W 15W 15W 15W 15W 15W 15W Efficiency 74.7% 74.7% 77.8% 79.2% 79.2% 79.2% 79.2% 79.2% 79.2% 79.2% 79.2% 74.7% 74.7% 77.8% 79.2% 79.2% 79.2% 79.2% 79.2% 79.2% 79.2% 79.2% 74.7% 74.7% 77.8% 79.2% 79.2% 79.2% 79.2% 79.2% 79.2% 79.2% 79.2% 74.7% 74.7% 77.8% 79.2% 79.2% 79.2% 79.2% 79.2% 79.2% 79.2% 79.2% 74.7% 74.7% 77.8% 79.2% 79.2% 79.2% 79.2% 79.2% 79.2% 79.2% 79.2% Class AC Inlet Class I IEC-320-C14 Class II IEC-320-C8 Class I IEC-320-C6 Class II 2 Prong A Stand and Mains Power Cord Class I 3 Prong A Stand and Mains Power Cord NOTES 1. The output voltage is specified as a range (ex: 40~48VDC); the customer must specify what they would like the output voltage set at. 2. The “*” represents PSE approval. 3. Model DTIPU16-101 has been approved by CEC Level IV. Models DTIPU16-102~111 have been approved by CEC Level V 4. Optional output connectors available. Please call factory for ordering details. 06/27/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 7 Rev. B DTIPU16 Series Up to 15 Watts Class I & II, Single Outputs AC/DC Desktop Power Supplies MECHANICAL DRAWINGS A, B, and C Type Models Unit: inches (mm) 3.58±0.04 (91.0±1.0) 1.50±0.04 (38.0±1.0) TYPE A IEC-320-C14 1.42±0.04 (36.0±1.0) TYPE B IEC-320-C8 TYPE C IEC-320-C6 NOTES: 1. All dimensions are for reference only 2. Weight is 5.8oz (165g) 3. Optional output connectors are available 06/27/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 7 Rev. B DTIPU16 Series Up to 15 Watts Class I & II, Single Outputs AC/DC Desktop Power Supplies D Type Models Unit: inches (mm) UL Type 1.42±0.04 (36.0±1.0) 1.50±0.04 (38.0±1.0) 3.58±0.04 (91.0±1.0) NOTES: 1. All dimensions are for reference only 2. Weight is 5.8oz (165g) (not including AC input cord) 3. Optional output connectors are available 06/27/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 5 of 7 Rev. B DTIPU16 Series Up to 15 Watts Class I & II, Single Outputs AC/DC Desktop Power Supplies E Type Models Unit: inches (mm) UL Type 1.42±0.04 (36.0±1.0) 1.50±0.04 (38.0±1.0) 3.58±0.04 (91.0±1.0) NOTES: 1. All dimensions are for reference only 2. Weight is 5.8oz (165g) (not including AC input cord) 3. Optional output connectors are available not including 06/27/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 6 of 7 DTIPU16 Series Up to 15 Watts Class I & II, Single Outputs AC/DC Desktop Power Supplies Rev. B DERATING CURVE 120 Output Power (%) 100 80 60 40 20 0 -20 -10 0 10 20 30 40 50 60 70 80 Ambient Temperature (°C) COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 06/27/2012 (603)778-2300 (888)587-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 7 of 7