K Series

05459
K SERIES
Only One Name Means ProTek’Tion™
HIGH POWERED TVS COMPONENT
APPLICATIONS
Bidirectional
• DC & AC Applications
• Remote Transmission Lines
• Industrial Wiring
AXIAL LEAD
FEATURES
• UL File Recognition #E208219
• Axial Lead Terminals
• High Current Capability
• Excellent Clamping Voltage
• Glass Passivated Junction
• Bidirectional Configuration
• Low Slope Resistance
• Repetition Rate (Duty Cycle): 0.01%
• Hazardous Substance Free
• RoHS Complaint (Exemption #7)
MECHANICAL CHARACTERISTICS
• Epoxy Encapsulated Axial Lead Device
• Approximate Weight: 3.35 grams
• High Temperature Soldering: 260°C / 10 seconds at Terminals
• Flammability Rating UL 94V-0
• Marking: Part Number
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
SYMBOL
VALUE
UNITS
TJ
-55 to 150
°C
Storage Temperature
TSTG
-55 to 150
°C
KA Series - Current Rating, Rated IPP @ 8/20µs
IPP
3
kA
KB Series - Current Rating, Rated IPP @ 8/20µs
IPP
6
kA
KC Series - Current Rating, Rated IPP @ 8/20µs
IPP
10
kA
K1 Series - Current Rating, Rated IPP @ 8/20µs
IPP
1
kA
KD Series - Current Rating, Rated IPP @ 8/20µs
IPP
15
kA
Operating Temperature
05459.R5 6/16
Page 1
www.protekdevices.com
05459
K SERIES
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
(Note 1)
REVERSE
STAND-OFF
VOLTAGE
MINIMUM
BREAKDOWN
VOLTAGE
TEST
CURRENT
CURRENT
RATING
MAXIMUM
CLAMPING
VOLTAGE
REVERSE
LEAKAGE
CURRENT
V AC
VOLTS
V DC
VOLTS
V(BR) @ IT
VOLTS
@ IT
mA
8/20µs
kA
@ I PP
VC
VOLTS
@V DC
IR
µA
K1-076
54.0
76.0
83.0
10
1
135.0
20
KA-058*
40.0
58.0
64.0
10
3
110.0
20
KA-076*
54.0
76.0
85.0
10
3
140.0
20
KA-150
106.0
150.0
158.0
10
3
230.0
10
KA-380*
275.0
380.0
401.0
10
3
520.0
20
KA-430*
310.0
430.0
440.0
10
3
652.0
20
KB-058*
40.0
58.0
64.0
10
6
110.0
20
KB-076*
54.0
76.0
83.0
10
6
135.0
20
KB-170*
130.0
170.0
180.0
10
6
260.0
20
KB-190*
145.0
190.0
200.0
10
6
290.0
20
KB-240*
180.0
240.0
250.0
10
6
340.0
20
KB-380*
275.0
380.0
401.0
10
6
520.0
20
KB-430*
310.0
430.0
440.0
10
6
625.0
20
KC-058
40.0
58.0
64.0
10
10
110.0
20
KC-076*
54.0
76.0
83.0
10
10
135.0
20
KC-170
130.0
170.0
180.0
10
10
260.0
20
KC-190*
145.0
190.0
200.0
10
10
290.0
20
KC-200*
150.0
200.0
222.0
10
10
330.0
20
KC-240
180.0
240.0
250.0
10
10
340.0
20
KC-250
188.0
250.0
261.0
10
10
370.0
20
KC-380*
275.0
380.0
401.0
10
10
520.0
20
KC-430*
310.0
430.0
440.0
10
10
625.0
20
KD-058
40.0
58.0
64.0
10
15
110.0
20
KD-076
54.0
76.0
85.0
10
15
145.0
20
NOTE
1. *Contact factory for minimum order quantities.
05459.R5 6/16
Page 2
www.protekdevices.com
05459
K SERIES
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
TABLE 1 - STANDARD PACKAGE , LEADED PROCESS, PACKAGE PEAK REFLOW TEMPERATURE
Package Thickness
Volume mm3 < 350
Volume mm3 >= 350
< 2.5mm
240 +0/-5°C
225 +0/-5°C
>= 2.5mm
225 +0/-5°C
225 +0/-5°C
NOTES:
1. The package thickness and volume dictates the maximum component temperature. The thermal gradients between packages can be reduced by using convection reflow processes.
2. Volume of the package does not account for the external terminals.
3. Package volume is the equivalent of package size multipled by the height.
TABLE 2 - LEAD-FREE PROCESS, PACKAGE PEAK REFLOW TEMPERATURE
Package Thickness
Volume mm3 < 350
Volume mm3 250 - 2000
Volume mm3 > 2000
< 1.6mm
260 +0°C
260 +0°C
260 +0°C
1.6mm - 2.5mm
260 +0°C
250 +0°C
245 +0°C
>= 2.5mm
250 +0°C
245 +0°C
245 +0°C
NOTES:
1.
2.
3.
4.
5.
6.
The profiling tolerance is +0, -X °C but at no time will it exceed -5°C.
Volume of the package does not account for the external terminals.
The package thickness and volume dictates the maximum component temperature. The thermal gradients between packages can be reduced by using convection reflow processes.
Components used in lead-free assembly shall be evaluated using the lead-free classification temperature and profiles as defined in the above table.
Table 3 will help determine if the components are lead-free or not.
The device manufacturer/supplier shall ensure process compatibility up to and including the stated classification temperature at the rated MSL level.
TABLE 3 - CLASSIFICATION REFLOW PROFILES
Profile Feature
Sn - Pb Eutetectic Assembly
Pb-Free Assembly
Average Ramp Up Rate (TSMAX to TP)
3°C/seconds Max.
3°C/seconds Max.
Preheat
Temperature Min TSMIN
Temperature MAX TSMAX
Time (TSMIN to TSMAX) (ts)
100°C
150°C
60-120 seonds
150°C
200°C
60-180 seconds
Time Maintained Above
Temperature (TL)
Time(tL)
183°C
60-150 seconds
217°C
60-150 seconds
Peak/Classification Temperature (TP)
See Table 1
See Table 2
Time Within 5°C of Actual Temperature (tP)
10-30 seconds
20-40 seconds
Ramp-Down Rate
6°C/seconds Max.
6°C/seconds Max.
Time 25°C to Peak Temperature
6 Minutes Max.
8 Minutes Max.
NOTES:
1. All temperatures refer to topside of the package, measured on the package body surface.
2. Time within 5°C of the actual peak temperature (TP) specified for the reflow profiles is “supplier” minimum and “user” maximum.
05459.R5 6/16
Page 3
www.protekdevices.com
05459
K SERIES
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
FIGURE 1
SOLDER WAVEFORM
Tp
Tp
Critical Zone
TL to Tp
Ramp-Up
Temperature
TL
tL
Tsmax
Tsmin
ts Preheat
Ramp-Down
t 25°C to Peak
Time
FIGURE 2
POWER DERATING CURVE
100
Peak Pulse Power
10/1000µs
% Of Rated Power
80
60
40
20
0
0
25
50
75
100
125
150
TA - Ambient Temperature - °C
05459.R5 6/16
Page 4
www.protekdevices.com
05459
K SERIES
Only One Name Means ProTek’Tion™
AXIAL LEAD PACKAGE INFORMATION
OUTLINE DIMENSIONS
DIM
MILLIMETERS
INCHES
MIN
MAX
MIN
MAX
A
-
14.5
-
0.57
B
-
12.7
-
0.50
C
1.28
1.32
0.050
0.052
D
5.0
7.0
0.20
0.28
E
23.45
24.85
0.92
0.98
F
-
2.5
-
0.10
E
B
A
F
D
C
05459.R5 6/16
Page 5
www.protekdevices.com
05459
K SERIES
Only One Name Means ProTek’Tion™
COMPANY INFORMATION
COMPANY PROFILE
In business more than 20 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage protection and overcurrent protection components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering
diode TVS array and electronics SMD chip fuses. These components deliver circuit protection in electronic systems from numerous overvoltage and
overcurrent events. They include lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electromagnetic interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers high performance interface and linear products. They
include analog switches; multiplexers; LED drivers; LED wafer die for ESD protection; audio control ICs; RF and related high frequency products.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: & Marketing: 602-414-5109
Customer Service: 602-414-5114
Product Technical Support: 602-414-5107
By Fax
General: 602-431-2288
By E-mail:
Asia Sales: [email protected]
Europe Sales: [email protected]
U.S. Sales: [email protected]
Distributor Sales: [email protected]
Customer Service: [email protected]
Technical Support: [email protected]
ProTek Devices (Asia Pacific) Pte. Ltd.
8 Ubi Road 2, #06-19
Zervex
Singapore - 408538
Tel: +65-67488312
Fax: +65-67488313
Web
www.protekdevices.com
COPYRIGHT © ProTek Devices 2014 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,
consequential or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory.
05459.R5 6/16
Page 6
www.protekdevices.com