SW DB10XS-W

DB101S THRU DB107S
SAMWIN SINGLE-PHASE GLASS
PASSIVATED SILICON BRIDGE RECTIFIER
REVERSE VOLTAGE:
FORWARD CURRENT:
50 to 1000 VOLTS
1.0 AMPERE
Mechanical Data
· Case: Molded plastic, DB-S
· Epoxy: UL 94V-O rate flame retardant
· Terminals: Leads solderable per MIL-STD-202,
method 208 guaranteed
· Mounting position: Any
· Weight: 0.02ounce, 0.4gram
Product Features
· Plastic material has Underwriters Laboratory
· Flammability Classification 94V-0
· High surge overload rating of 50 Amperes peak
· Ideal for printed circuit board
· Glass passivated chip junction
Package Dimensions in inches (mm)
Absolute Maximum Ratings
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Symbols DB101S DB102S DB103S DB104S DB105S DB106S DB107S
Units
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
Volts
Maximum Average Forward
I(AV)
1.0
Amp
IFSM
50
Amp
VF
1.1
Volts
Rectified Current at TA=40℃
Peak Forward Surge Current,8.3ms single
half-sine-wavesuperimposed on rated load
(JEDEC method)
Maximum Forward Voltageat 1.0A DC and 25
Maximum Reverse Current at TA=25℃
5.0
IR
500
at Rated DC Blocking Voltage TA=125℃
uAmp
CJ
25
pF
Typical Thermal Resistance (Note 2)
RθJA
40
℃/W
Typical Thermal Resistance (Note 2)
RθJL
15
℃/W
TJ,Tstg
-55 to +150
℃
Typical Junction Capacitance (Note 1)
Operating and Storage Temperature Range
Notes:
1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
2- Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.5 x 0.5" (13
x 13mm) copper pads.
1/3
REV 1.01
08.08.25
DB101S THRU DB107S
SAMWIN SINGLE-PHASE GLASS
PASSIVATED SILICON BRIDGE RECTIFIER
Ratings and Characteristic Curves
SAMWIN SOUTH SCIENCE & THECNOLOGY CO., LTD.
ROOM 2005, CYBER TIMES TOWER A, TIANAN CYBER PARK, FUTIAN DISTRICT, SHENZHEN,CHINA
TEL:+86-755-83981818 FAX::+86-755-83476838
E-mail: [email protected] http://www.samwinsemi.com/
2/3
REV 1.01
08.08.25