V ishay I n tertech n olo g y, I n c . TANTALUM CAPACITORS Capacitors - For Non-Life Support Medical Applications TM3 Solid Tantalum Surface-Mount Chip Capacitors TANTAMOUNT®, Molded Case, for Medical Instruments Key Benefits • • • • • • • • • • For non-life support medical applications High reliability Weibull grading options 100 % surge current tested (B, C, D, E cases) Terminations: 100 % matte tin and tin/lead Standard EIA 535BAAC case sizes (A through E) Manufacturing location is certified to medical standard ISO 13485 Compliant terminations Mounting: surface-mount Dry pack as per IPC/JEDEC J-STD-033 standard APPLICATIONS • Portable battery powered products in home medical products • Blood glucose monitors and meters, infusion pumps, body worn devices, childbirth monitoring, body temperature monitoring, nebulizer, thermometer Resources • Datasheet: TM3 - www.vishay.com/doc?40166 • For technical questions contact [email protected] • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0374-1307 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com www.vishay.com Vishay Sprague V ishay I n tertech n olo g y, I n c. Solid Tantalum Surface Mount Chip Cap Solid Tantalum Surface Mount Chip Capacitors ®, Molded Case, for Medical In ANTAMOUNT T TANTAMOUNT®, Molded Case, for Medical Instruments TANTALUM CAPACITORS FEATURES FEATURES • For non-life support me TM3 • High reliability • High reliability Available • Weibull grading options • Weibull grading options TM3 • 100 % surge current tes Available • 100 % surge current tested (B, C, D, E cases) www.vishay.com Vishay Sprague • Terminations: 100 % ma • Terminations: 100 % matte tin and tin/lead • Standard EIA 535BAAC • StandardChip EIA 535BAAC case sizes (A through E) Solid Tantalum Surface Mount Capacitors • Manufacturing location • Manufacturing location is certified to medical standard ISO 13485 for Medical Instruments TANTAMOUNT®, Molded Case, ISO 13485 • Compliant terminations • FEATURES Compliant terminations • Mounting: Surface moun • For non-life support medical applications • Mounting: Surface mount • Dry pack as per IPC/JED • High reliability PERFORMANCE/ELECTRICAL Available • Dry pack as per IPC/JEDEC J-STD-033 standard PERFORMANCE/ELECTRICAL • Weibull grading options • Material categorization: CHARACTERISTICS • Material categorization: For definitions ofAvailable compliance please see www.vishay.c CHARACTERISTICS • 100 % surge current tested (B,+125 C, D, °C E cases) Operating Temperature: -55 °C to please see www.vishay.com/doc?99912 Operating Temperature: -55 °C to +125 °C Terminations: 100 % matte tin and tin/lead (above 85• °C, voltage derating is required) Note (above 85 °C, voltage derating is required) Note * This datasheet provides • Standard EIA 1 535BAAC caseμF sizes (A through E) Capacitance Range: μF to 220 * This datasheet provides information about parts that are Capacitance Range: 1 μF to 220 μF RoHS-compliant and/or par •RoHS-compliant Manufacturing location is certified tostandard medical standard Capacitance Tolerance: ± 10 parts %, ± that 20 % and/or are non-RoHS-compliant. For example, parts with lead (Pb) Capacitance Tolerance: ± 10 %, ± 20 % standard ISO 13485 example, lead (Pb) terminations are not RoHS-compliant. Please see the information/t Voltage Rating: 4parts VDCwith to 20 VDC •Please Compliant terminations Voltage Rating: 4 VDC to 20 VDC see the information/tables in this datasheet for details. Solid Tantalum Surface-Mount Chip Capacitors TANTAMOUNT®, Molded Case, for Medical Instruments • Mounting: Surface mount • Dry pack as per IPC/JEDEC J-STD-033 standard ORDERING INFORMATION PERFORMANCE/ELECTRICAL ORDERING INFORMATION CHARACTERISTICS Operating Temperature: -55 °C to +125 TM3 C 226 K °C (above 85 °C, voltage derating is required) TYPE CASE CAPACITANCE CAPACITANCE Capacitance Range: 1 μF to 220 μF CODE TOLERANCE • Material categorization: For definitions of compliance TM3 C 226 K 6R3 please see www.vishay.com/doc?99912 6R3 C B A TYPE Note CASE CAPACITANCE CAPACITANCE DC VOLTAGE DC VOLTAGE TERMINATION RELIABILITY SURGE AT +85 °C * CODE This datasheet provides informationTOLERANCE about parts thatRATING are RATING AT +85 °C AND PACKAGING CURRENT RoHS-compliant and/or parts that areLEVEL non-RoHS-compliant. For TM3 Capacitance Tolerance: ± 10 %, ± 20 % standard example, withislead (Pb) terminationsKare not10 RoHS-compliant. See parts This expressed =± % This is expressed in www.vishay.com Voltage Rating: 4 VDC to 20 VDCK = ± 10 % See This is expressed This is expressed in see C: tin/ Thein this B =M 0.1 A = 10 cycles Please the information/tables datasheet Ratings in Matte picofarads. = ±%20 for %details. volts. To at complete Vishay Sprague Ratings in picofarads. The M = ± 20 % volts. To complete mm)digits reel are Weibull FRL +25the °C,three-digit 1.1 RV and Case7" (178 first two block, and Case first two digits are the three-digit block, tin/ S = Hi-Rel std. Z = zeros No surge Codes H: Matte the significant precede the Codes the significant zeros precede the mm) The ½ reel (for A case only)rating. ORDERING INFORMATION table. 7" (178 figures. third (40 h burn-in) voltage RATINGS AND figures. CASEThe CODES table. third voltage rating. E:isTin/lead/ Z = Nonthe A decimal point is TM3 C K C number of B A is the number of226 A decimal6R3 point is 7" (178 mm) established zeros to reel follow. indicated by an “R” μF TYPE 4V 6.3 V indicated 16 V reliability CASE CAPACITANCE CAPACITANCE DC VOLTAGE RELIABILITY SURGE20 V(6R3 = 6.3 V). zeros to follow. by an “R”10 V TERMINATION L: Tin/lead/ CODE TOLERANCE (6R3 RATING AT V). +85 °C AND PACKAGING CURRENT = 6.3 7" (178 mm) ½ reel LEVEL 1.0 A 1.5 2.2 DIMENSIONS 3.3 See This is expressed Ratings in picofarads. The and Case first two digits are the significant inCodes inches figures. (millimeters) table. The third is the number of zeros to L follow. K = ± 10 % M = ± 20 % A A 4.7 6.8 10 This is expressed in C: Matte tin/ B = 0.1 % volts. To complete A 7" (178 mm) reel Weibull FRL A the three-digit block, H: Matte tin/ S = Hi-Rel std. DIMENSIONS in inches (millimeters) zeros precede the A 7" (178 mm) ½ reel (40 h burn-in) A/B voltage rating. E: Tin/lead/ Z = NonA decimal point is 7" (178 mm) reel established L A/B indicated by an “R”A L: Tin/lead/ reliability (6R3 = 6.3 V). 7" (178 mm) ½ reel A/B H TH Glue PadB (MIN.) in inches (millimeters) DIMENSIONS A/B B A/B W TH (MIN.) Glue Pad A/B TW B C TERMINATION AND PACKAGING C: Matte tin/ 7" (178 mm) reel H: Matte tin/ 7" (178 mm) ½ reel E: Tin/lead/ 7" (178 mm) reel L: Tin/lead/ 7" (178 mm) ½ reel A = 10 cycles at +25 °C, 1.1 RV Z = No surge (for A case only) B B C Glue Pad W H B/C B/C P C Glue Pad L CASE CODE EIA SIZE W H P 15 B/C B/C L CASE CODE EIA SIZE L W H T (MIN.) TW TW WP 0.126 ± 0.008 0.063 ± H0.008 0.063 ± 0.008 0.031 ± 0.012 T0.126 A ±HB/C 22 A/B/C C/D H ± 0.008 0.063 ± 0.008 0.063 0.008 3216-18 0.031 ± 0.012B/C/D 0.047 ± 0.004 0.028 Glue Pad [3.2 ± 0.20] [1.6 ± 0.20] [1.6 ± 0.20] [0.80 ± 0.30] A 3216-18 (MIN.) [3.2 ± 0.20] [1.6 ± 0.20] [1.6 ± 0.20] [0.80 ± 0.30] P [1.2 ± 0.10] [0.70] Glue Pad 0.138 0.110 ±D0.008 0.075 ± 0.008 0.031 ± 0.012 33 B D ± 0.008 B ±B/C/D 0.138 ± 0.008 0.110 ± 0.008 0.075 0.008 3528-21 0.031 ± 0.012 [3.50.087 ± 0.004 [2.8 ± 0.20] 0.028 ± 0.20] [1.9 ± 0.20] [0.80 ± 0.30] B 3528-21 [3.5 ± 0.20] L [2.8 ± 0.20] [1.9 ± H 0.20] [0.80P ± 0.30] C/D T[2.2 ± 0.10] TH (MIN.)E[0.70] EIA SIZE W 47 CASE CODE B/C/D C/D 0.236 ±W 0.012 0.126 ± 0.012 0.098 ± 0.012 0.051 ± 0.012 C 6032-28 0.236 ± 0.126 0.012± 0.008 0.1260.063 ± 0.012 0.051± ± 0.012 0.047 ± 0.004 [3.2 0.039 ± 0.008 0.098 0.063±±0.012 0.008 0.031 0.012 0.004 0.028± 0.30] [6.00.087 ±± 0.30] [2.5 ± 0.30] [1.3 ± 0.30] A 6032-28 3216-18 C 68 [3.2 ± 0.20] [3.2 ± 0.20] [1.6± ±0.30] 0.20] [0.80 [1.2 [2.2 ± 0.10] B [6.0 ± 0.30] D ±[1.6 D 0.30] [2.5 [1.3±±0.30] 0.30] D ± 0.10] [0.70] [1.0] 0.287 ± 0.004 0.012 0.169 ± 0.012 0.110 ± 0.012 0.051 ± 0.012 0.138 ± 0.008 0.110 ± 0.008 0.075 ± 0.008 0.031 ± 0.012 0.087 ± 0.028 D 7343-31 0.169 ± 0.012 0.110 ± 0.012 0.051 ± 0.012 D/E 0.094 ± 0.004 [4.3 0.039 B [7.3 0.30] [2.8 ± 0.30] [1.3 ± 0.30] D 0.287 ± 0.012 D [3.5 ± 0.20] D [2.8 ± 0.20] [1.9 ± 0.20] [0.80 ± 0.30] [2.2 ± ± 0.10] [0.70]± 0.30] D 100 7343-31 3528-21 [7.3 ± 0.30] [4.3 ± 0.30] [2.8 ± 0.30] [1.3 ± 0.30] [2.4 ± 0.10] [1.0] 0.236 ± 0.012 0.126 ± 0.012 0.098 ± 0.012 0.051 ± 0.012 0.287 0.087 ± 0.039 ± 0.012 ± 0.004 0.012 0.169 0.157 ± 0.012 0.051 ± 0.012 C 6032-28 E 7343-43 150 D 0.287 ± 0.012 D 0.169 ± 0.012 0.157 ± 0.012 0.051 ± 0.012 0.094 ± 0.004 0.039 [6.0 ± 0.30] [3.2 ± 0.30] [2.5 ± 0.30] [1.3 ± 0.30] [2.2 ± 0.10] [1.0] ± 0.30 [7.3 0.30] [4.3 [4.0 ± 0.30] [1.3 ± 0.30] E 7343-43 [7.3 ± 0.30] ± 0.30 ± 0.30] [1.3±±0.012 0.30] 0.094[2.4 ± 0.10] 0.039 [1.0] 0.287 ± 0.012[4.30.169 ± 0.012 [4.0 0.110 ± 0.012 0.051 ± 0.004 D 7343-31 220 D/E E Note [7.3 ± 0.30] D/E [4.3 ± 0.30] [2.8 ± 0.30] [1.3 ± 0.30] [2.4 ± 0.10] [1.0] Note Glue 0.157 pad (non-conductive, part of molded case) is dedicated for glue attachment (as user option). ± 0.012 0.169 ± •0.012 ± 0.012 0.051 ± 0.012 0.094 ± 0.004 0.039 E 7343-43 • Glue pad (non-conductive, part of molded0.287 case) is dedicated glue attachment [7.3 ± 0.30] [4.3 for ± 0.30 [4.0 ± 0.30](as user [1.3option). ± 0.30] [2.4 ± 0.10] [1.0] Revision: 02-Jul-13 Note Revision: 02-Jul-13 • Glue pad (non-conductive, part of molded case) is dedicated for1glue attachment (as user option). MARKING 1 Document Number: 40166 For technical questions, contact: [email protected] For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE NOTICE. THE PRODUCTS DESCRIBED H “A” CASE VOLTAGE CODE Revision: 02-Jul-13 DocumentWITHOUT Number: 40166 1 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THISDISCLAIMERS, DOCUMENT SET FORTH AT www.vishay.com/ ARE SUBJECT TO SPECIFIC For technical questions, contact: [email protected] ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VOLTS CODE Indicates TM3 Series THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT Indicates TM3 Series ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Voltage 4.0 G Capacitance μF Capacitance Code, pF J 225M Polarity Band (+) A Case Revision 21-Jun-13 Capacitors - For Non-Life Support Medical Applications • For non-life support medical applications Voltage Code 6.3 J 10 A 16 C 20 D 25 E 35 V 50 T Polarity Band (+) Date Code 22 M10 XX 2 Vishay Sprague Logo B, C, D, E Cases Marking Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. “A” case capacitors use a letter code for the voltage and EIA capacitance code. The Vishay Sprague® trademark is included if space permits. Capacitors rated at 6.3 V are marked 6 V. A manufacturing date code is marked on all capacitors. Call the factory for further explanation. PRODUCT SHEET 2/2 VMN-PT0374-1307 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000