SGC10CS Surface Mount Schottky Rectifier Reverse Voltage 200V Forward Current 10A Features • • • • • • • • Heatsink design Schottky barrier diodes Low leakage current Solder dip 260 °C, 10 s Low forward voltage drop Low profile - typical height of 1.1 mm Moisture sensitivity: level 1, per J-STD-020 High temperature soldering guaranteed: 260℃/10 seconds eSGC (TO‐277) Anode 1 Cathode & Heatsink Anode 2 Typical Applications For low voltage high frequency inverters, DC/DC converters and polarity protection application. Maximum Ratings g ((TA = 25 °C unless otherwise noted)) Parameter Symbol SGC10CS Unit Maximum repetitive peak reverse voltage VRRM 200 V Maximum RMS voltage VRMS 140 V VDC 200 V Maximum DC blocking voltage 1) Maximum average forward rectified current IF(AV) 10.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 175 A Operating junction and storage temperature range TJ, TSTG -55 to +150 °C Electrical Characteristics Parameter Maximum instantaneous forward voltage Maximum instantaneous reverse current Typical junction capacitance Typical thermal resistance (TA = 25 °C unless otherwise noted) Test Conditions IF=10A VR=200V TA=25℃ TA=25℃ TA=125℃ Symbol MAX. Unit VF 0.85 Volts IR CJ 4.0 V, 1 MHz juntion to mount RθJM 1) 50 uA 20 mA 206 pF 5 ℃/W Note1)Thermal resistance RθJM is junction to mount,mounted on P.C.B with 30*30mm copper pad area www.goodark.com 1/4 2015.04-Rev.A SGC10CS Surface Mount Schottky Rectifier Reverse Voltage 200V Forward Current 10A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 1.Maximum Non‐Repetitive Peak Forward Surge Current Figure 2. Typical Reverse Characteristics Figure 4. Typical Instantaneous Forward Characteristics Figure 3. Typical Junction Capacitance Figure 5.Forward Current Derating Curve www.goodark.com 2/4 2015.04-Rev.A SGC10CS Surface Mount Schottky Rectifier Reverse Voltage 200V Forward Current 10A Package Outline Dimensions DIM HE E D B1 B2 A C L L1 L2 L3 D1 E1 Unit: mm Unit: inch MIN MAX 6.4 6.6 5.6 5.8 4.1 4.3 1.7 1.9 0.8 1 1.05 1.2 0.3 0.4 0.85 1.1 4.2 4.4 3.52 Typ. 1.1 1.4 3 3.3 1.86 Typ. MIN MAX 0.252 0.260 0.220 0.228 0.161 0.169 0.067 0.075 0.031 0.039 0.041 0.047 0.012 0.016 0.033 0.043 0.165 0.173 0.139 Typ. 0.043 0.055 0.118 0.130 0.073 Typ. Soldering footprint Packing Information Packing quantities: 5000 pcs/Reel，12mm Tape, 13" Reel Tape & Reel Specification www.goodark.com 3/4 2015.04-Rev.A SGC10CS Surface Mount Schottky Rectifier Reverse Voltage 200V Forward Current 10A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Good Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, materials including product data, data diagrams, diagrams charts, charts programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, li bilit or other liability, th loss l rising i i f from these th inaccuracies i i or errors. Please Pl also l pay attention tt ti to t information i f ti published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, p g g y charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2015.04-Rev.A