LMS12 thru LMS14 Low Profile Surface Mount Schottky Bridge Rectifiers Reverse Voltage 20~40V Output Current 1A Features • • • • • • • • Super Low VF Schottky barrier bridge rectifiers Low profile，Max Height 1.30mm Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 AEC-Q101 qualified High temperature soldering guaranteed: 260℃/10 seconds Halogen-free according to IEC 61249-2-21 definition LPMB Typical Applications For use of fast swiching in RF module, lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless l otherwise th i noted) t d) Parameter Symbol Maximum repetitive peak reverse voltage VRRM Maximum RMS voltage VRMS Maximum DC blocking voltage VDC Maximum average output rectified current Io(AV) ( )1) Peak forward surge current 8.3 ms single half sineIFSM wave superimposed on rated load TJ Operating junction temperature range LMS12 LMS13 LMS14 Unit 20 14 20 30 21 30 40 28 40 V V V TSTG Storage temperature range 1.0 A 30 A - 55 to + 150 °C - 55 to + 150 °C Electrical Characteristics (TA = 25 °C unless otherwise noted) Parameter Test Conditions Symbol Maximum instantaneous forward voltage IF=0.5A,TA=25℃ VF Maximum DC reverse current at rated DC blocking voltage TA=25℃ TA=125℃ IR Typical junction capacitance 4.0 V, 1 MHz Typical thermal resistance Notes: www.goodark.com 1) juntion to ambient LMS12 LMS13 LMS14 Unit 0.45 Volts 200 uA 30 mA CJ 71 pF RθJA 40 20 juntion to case RθJC 1. On glass epoxy PCB, mounted on 1.3*1.3mm solder pads 1/4 ℃/W 2015.01-Rev.A LMS12 thru LMS14 Low Profile Surface Mount Schottky Bridge Rectifiers Reverse Voltage 20~40V Output Current 1A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current Figure 1.Output Rectifier Current Derating Curve Figure 3. Typical Instantaneous Forward Characteristics Figure 4. Typical Reverse Characteristics Figure 5. Typical Junction Capacitance www.goodark.com 2/4 2015.01-Rev.A LMS12 thru LMS14 Low Profile Surface Mount Schottky Bridge Rectifiers Reverse Voltage 20~40V Output Current 1A Package Outline Dimensions DIM Unit: mm Unit: inch MIN MAX MIN MAX A 1.2 1.3 0.047 0.051 A1 0 0.1 0.000 0.004 B 0.5 0.75 0.020 0.030 C 0.1 0.25 0.004 0.010 D 2.54 typ. 0.10 typ. E1 47 4.7 49 4.9 0 185 0.185 0 193 0.193 E2 4.7 4.9 0.185 0.193 L 0.4 0.7 0.016 0.028 HE 6.65 6.95 0.262 0.274 Mounting pad layout in mm(inch) Packing Information Packing quantities: 4000 pcs/Reel, 15 Reels/Box; 12mm Tape, 13" 13 Reel Tape & Reel Specification www.goodark.com 3/4 2015.01-Rev.A LMS12 thru LMS14 Low Profile Surface Mount Schottky Bridge Rectifiers Reverse Voltage 20~40V Output Current 1A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any i t ll t l property intellectual t rights, i ht or any other th rights, i ht belonging b l i to t Suzhou S h Good-Ark G d A k Electronics El t i Co., C Ltd.or Ltd a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou GoodArk Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain i technical h i l inaccuracies i i or typographical hi l errors. Suzhou S h Good-Ark G d A k Electronics El i Co., C Ltd. Ld assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, materials including product data, data diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2015.01-Rev.A