HSU285 Silicon Schottky Barrier Diode for High frequency detection REJ03G0009-0100Z Rev.1.00 Apr.16.2003 Features • Low forward voltage, Low capacitance and High detection sensitivity. • Ultra small Resin Package (URP) is suitable for surface mount design. Ordering Information Type No. Laser Mark Package Code HSU285 S6 URP Pin Arrangement Cathode mark Mark 1 S6 2 1. Cathode 2. Anode Rev.1.00, Apr.16.2003, page 1 of 5 Datasheet Title<Header> Absolute Maximum Ratings (Ta = 25°C) Item Symbol Value Unit Reverse voltage VR 2 V Average rectified current IO 5 mA Junction temperature Tj 125 °C Storage temperature Tstg –55 to +125 °C Electrical Characteristics (Ta = 25°C) Item Symbol Min Typ Max Unit Test Condition Forward voltage VF1 — — 0.15 V IF = 0.1 mA VF2 — — 0.27 Capacitance C — 0.3 — pF VR = 1 V, f = 1 MHz — 10 — — V C = 200 pF, RL = 0 Ω, Both forward and reverse direction 1 pulse. 1 ESD-Capability * Note: 1. Failure criterion ; IR > 100 µA at VR = 0.5 V Rev.1.00, Apr.16.2003, page 2 of 5 IF = 1 mA Datasheet Title<Header> 10–2 10–2 10–3 10–3 Reverse current IR (A) Forward current IF (A) Main Characteristic 10–4 10–5 10–6 0 0.1 0.2 0.3 0.4 0.5 10–4 Ta = 25°C 10–5 10–6 0 1 2 3 4 5 Forward voltage VF (V) Reverse voltage VR (V) Fig.1 Forward current vs. Forward voltage Fig.2 Reverse current vs. Reverse voltage f = 1MHz 10 Capacitance C (pF) Ta = 75°C 1.0 0.1 0.1 1.0 10 Reverse voltage VR (V) Fig.3 Capacitance vs. Reverse voltage Rev.1.00, Apr.16.2003, page 3 of 5 Datasheet Title<Header> Package Dimensions As of January, 2003 Rev.1.00, Apr.16.2003, page 4 of 5 0.9 ± 0.15 0 – 0.10 1.25 ± 0.15 1.7 ± 0.15 2.5 ± 0.15 0.3 ± 0.15 Unit: mm Package Code JEDEC JEITA Mass (reference value) URP Conforms — 0.004 g Datasheet Title<Header> Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corporation product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation or a third party. 2. Renesas Technology Corporation assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corporation by various means, including the Renesas Technology Corporation Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corporation assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corporation for further details on these materials or the products contained therein. http://www.renesas.com Copyright © 2003. Renesas Technology Corporation, All rights reserved. Printed in Japan. Colophon 0.0 Rev.1.00, Apr.16.2003, page 5 of 5